mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Alexander Dahl <ada@thorsis.com>
To: ptxdist@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: Re: [ptxdist] [PATCH 5/7] u-boot: add u-boot{-dtb, -with-spl-pbl}.bin image installation options
Date: Tue, 05 Feb 2019 08:30:26 +0100	[thread overview]
Message-ID: <3719749.xbKYXJrUkm@ada> (raw)
In-Reply-To: <20181010120338.2717-5-a.fatoum@pengutronix.de>

Hei hei,

I had another look at this series, because I'm currently building u-boot for a 
new target. This patch looks good I think (see below).

However, what is the status of this whole series? Will there be a v2?

Am Mittwoch, 10. Oktober 2018, 14:03:36 CET schrieb Ahmad Fatoum:
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  platforms/u-boot.in | 14 ++++++++++++++
>  rules/u-boot.make   | 13 +++++++++++--
>  2 files changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> index 38684a03a376..bcb78cfc3f5a 100644
> --- a/platforms/u-boot.in
> +++ b/platforms/u-boot.in
> @@ -75,5 +75,19 @@ config U_BOOT_INSTALL_U_BOOT_IMX
>  	  Installing the U-Boot image with imx header (u-boot.imx) into platform
>  	  image directory. Say yes if you are building for freescale i.MX SOC
> 
> +config U_BOOT_INSTALL_U_BOOT_DTB
> +	prompt "install u-boot-dtb.bin"
> +	bool
> +	help
> +	  Installing the U-Boot binary concatenated with the device tree
> +	  into platform image directory.
> +
> +config U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
> +	prompt "install u-boot-with-spl-pbl.bin"
> +	bool
> +	help
> +	  Installing the U-Boot binary which contains as well the SPL and PBL.
> +	  Say yes if you are building for Layerscape SoCs
> +
>  endif
> 
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index 24f3fe3983f5..d9bcdf5ca64d 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -93,6 +93,14 @@ ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_IMG
>  endif
>  ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_IMX
>  	@install -v -D -m644 $(U_BOOT_DIR)/u-boot.imx $(IMAGEDIR)/u-boot.imx
> +endif
> +ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_DTB
> +	@install -v -D -m644 $(U_BOOT_DIR)/u-boot-dtb.bin \
> +		$(IMAGEDIR)/u-boot-dtb.bin
> +endif
> +ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
> +	@install -v -D -m644 $(U_BOOT_DIR)/u-boot-with-spl-pbl.bin \
> +		$(IMAGEDIR)/u-boot-with-spl-pbl.bin
>  endif
>  	@$(call touch)
> 
> @@ -103,8 +111,9 @@ endif
>  $(STATEDIR)/u-boot.clean:
>  	@$(call targetinfo)
>  	@$(call clean_pkg, U_BOOT)
> -	@rm -vf $(IMAGEDIR)/u-boot.bin $(IMAGEDIR)/u-boot.srec
> $(IMAGEDIR)/u-boot.elf -	@rm -vf $(IMAGEDIR)/u-boot.imx
> +	@rm -vf $(IMAGEDIR)/u-boot.bin $(IMAGEDIR)/u-boot.srec
> +	@rm -vf $(IMAGEDIR)/u-boot.elf $(IMAGEDIR)/u-boot.imx
> +	@rm -vf	$(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin
> 
>  #
> ---------------------------------------------------------------------------
> - # oldconfig / menuconfig

The "u-boot-dtb.bin" and clean parts look fine.

However, in upstream u-boot 2019.01 I could not find a defconfig which 
actually creates a file "u-boot-with-spl-pbl.bin" although there seems to be a 
make target for that. Could you name a defconfig for testing?

Greets
Alex


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

  reply	other threads:[~2019-02-05  7:30 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-10 12:03 [ptxdist] [PATCH 1/7] u-boot: specify GPL-2.0-only as LICENSE Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 2/7] u-boot: add support for oldconfig/menuconfig Ahmad Fatoum
2018-10-16  7:52   ` Michael Olbrich
2018-10-16  8:02     ` Alexander Dahl
2018-10-16  8:25   ` Michael Olbrich
2018-10-10 12:03 ` [ptxdist] [PATCH 3/7] u-boot: add V=$(PTXDIST_VERBOSE) to make options Ahmad Fatoum
2018-10-11  6:52   ` Alexander Dahl
2018-10-10 12:03 ` [ptxdist] [PATCH 4/7] u-boot: run install(1)/rm(1) with -v Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 5/7] u-boot: add u-boot{-dtb, -with-spl-pbl}.bin image installation options Ahmad Fatoum
2019-02-05  7:30   ` Alexander Dahl [this message]
2019-02-05  9:29     ` Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 6/7] u-boot: allow generation of custom environment binary Ahmad Fatoum
2018-10-16  8:13   ` Michael Olbrich
2018-10-16 10:58   ` Denis OSTERLAND
2018-10-16 11:27     ` Alexander Dahl
2018-10-16 12:26       ` Michael Olbrich
2018-10-16 13:13         ` Alexander Dahl
2019-04-04 14:17         ` Alexander Dahl
2018-10-16 11:20   ` Alexander Dahl
2018-10-10 12:03 ` [ptxdist] [PATCH 7/7] u-boot: allow generation of boot script Ahmad Fatoum
2018-10-11  6:44 ` [ptxdist] [PATCH 1/7] u-boot: specify GPL-2.0-only as LICENSE Alexander Dahl
2018-10-11  9:05   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3719749.xbKYXJrUkm@ada \
    --to=ada@thorsis.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox