Re: [ptxdist] [APPLIED] hostapd: Add systemd service unit

["Artur Wiebe" <artur@4wiebe.de>]

Hi Michael,

here /etc/hostapd/hostapd.conf would be installed twice!

BR,
Artur

On Friday, 25 October, 2024 09:32 CEST, Michael Olbrich <m.olbrich@pengutronix.de> wrote:

> Thanks, applied as 49049c01b0a932c74c77b64f1b42c85141fec8e4.
> 
> Michael
> 
> [sent from post-receive hook]
> 
> On Fri, 25 Oct 2024 09:32:55 +0200, Gavin Schenk <g.schenk@eckelmann.de> wrote:
> > If selected, start hostapd as a systemd service in multi-user.target
> > using a configuration file at the specified file path.
> > 
> > Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
> > Message-Id: <20241008132331.1372881-1-g.schenk@eckelmann.de>
> > Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
> > 
> > diff --git a/projectroot/etc/hostapd/hostapd.conf b/projectroot/etc/hostapd/hostapd.conf
> > new file mode 100644
> > index 000000000000..9e425a8c3d71
> > --- /dev/null
> > +++ b/projectroot/etc/hostapd/hostapd.conf
> > @@ -0,0 +1,2 @@
> > +# This is a placeholder.  You have to provide a real configuration here. See
> > +# hostapd.conf in package hostapd as a starting point for you own configuration.
> > diff --git a/projectroot/usr/lib/systemd/system/hostapd.service b/projectroot/usr/lib/systemd/system/hostapd.service
> > new file mode 100644
> > index 000000000000..bef52896c28e
> > --- /dev/null
> > +++ b/projectroot/usr/lib/systemd/system/hostapd.service
> > @@ -0,0 +1,15 @@
> > +[Unit]
> > +Description=Access point and authentication server for Wi-Fi and Ethernet
> > +After=network.target
> > +ConditionFileNotEmpty=/etc/hostapd/hostapd.conf
> > +
> > +[Service]
> > +Type=forking
> > +PIDFile=/run/hostapd.pid
> > +Restart=on-failure
> > +RestartSec=2
> > +Environment=DAEMON_CONF=/etc/hostapd/hostapd.conf
> > +ExecStart=/usr/sbin/hostapd -B -P /run/hostapd.pid ${DAEMON_CONF}
> > +
> > +[Install]
> > +WantedBy=multi-user.target
> > diff --git a/rules/hostapd.in b/rules/hostapd.in
> > index 6ac6be52cd6f..9c95fe37387e 100644
> > --- a/rules/hostapd.in
> > +++ b/rules/hostapd.in
> > @@ -1,10 +1,10 @@
> >  ## SECTION=networking
> >  
> > -config HOSTAPD
> > +menuconfig HOSTAPD
> >  	tristate
> >  	select OPENSSL
> >  	select LIBNL3
> > -	prompt "hostapd"
> > +	prompt "hostapd                       "
> >  	help
> >  	  IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
> >  
> > @@ -21,3 +21,14 @@ config HOSTAPD
> >  	  authentication without requiring an external RADIUS
> >  	  authentication server), and RADIUS authentication server for
> >  	  EAP authentication.
> > +
> > +if HOSTAPD
> > +
> > +config HOSTAPD_SYSTEMD_UNIT
> > +	bool
> > +	prompt "Enable systemd support"
> > +	depends on INITMETHOD_SYSTEMD
> > +	help
> > +	  Install systemd units to start this service on startup.
> > +
> > +endif
> > diff --git a/rules/hostapd.make b/rules/hostapd.make
> > index 2d061b5d4412..11b5ca1b0e08 100644
> > --- a/rules/hostapd.make
> > +++ b/rules/hostapd.make
> > @@ -74,6 +74,15 @@ $(STATEDIR)/hostapd.targetinstall:
> >  	@$(call install_copy, hostapd, 0, 0, 0755, -, /usr/sbin/hostapd)
> >  	@$(call install_alternative, hostapd, 0, 0, 0644, /etc/hostapd/hostapd.conf)
> >  
> > +ifdef PTXCONF_HOSTAPD_SYSTEMD_UNIT
> > +	@$(call install_alternative, hostapd, 0, 0, 0644, \
> > +		/usr/lib/systemd/system/hostapd.service)
> > +	@$(call install_link, hostapd, ../hostapd.service, \
> > +		/lib/systemd/system/multi-user.target.wants/hostapd.service)
> > +	@$(call install_alternative, hostapd, 0, 0, 0644, \
> > +		/etc/hostapd/hostapd.conf)
/etc/hostapd/hostapd.conf is already installed above!
> > +endif
> > +
> >  	@$(call install_finish, hostapd)
> >  
> >  	@$(call touch)
>