[ptxdist] build failure with recent dropbear 2022.82 on ptxdist for arm-v5te

[Alexander Dahl <ada@thorsis.com>]

Hello,

trying to build dropbear as part of a ptxdist based embedded BSP for an 
armv5te target, more precisely I try to upgrade dropbear from 2020.81 to 
2022.82, the previous version builds fine, the new one fails to build.

Cross toolchain is OSELAS.Toolchain-2016.06.1/arm-v5te-linux-gnueabi/
gcc-5.4.0-glibc-2.23-binutils-2.26-kernel-4.6-sanitized

According to config.log … Invocation command line was

  $ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --
libdir=/usr/lib --build=x86_64-host-linux-gnu --host=arm-v5te-linux-gnueabi --
enable-harden --enable-largefile --disable-zlib --disable-pam --enable-openpty 
--enable-syslog --enable-shadow --disable-plugin --disable-fuzz --enable-
bundled-libtom --disable-lastlog --disable-utmp --disable-utmpx --disable-wtmp 
--disable-wtmpx --disable-loginfunc --disable-pututline --disable-pututxline

And localoptions.h was set to this:

  /* localoptions.h created by ptxdist */
  #define DROPBEAR_X11FWD 0
  #define DROPBEAR_CLI_LOCALTCPFWD 1
  #define DROPBEAR_CLI_REMOTETCPFWD 1
  #define DROPBEAR_SVR_LOCALTCPFWD 1
  #define DROPBEAR_SVR_REMOTETCPFWD 1
  #define DROPBEAR_SVR_AGENTFWD 0
  #define DROPBEAR_CLI_AGENTFWD 0
  #define DROPBEAR_AES128 1
  #define DROPBEAR_3DES 0
  #define DROPBEAR_AES256 1
  #define DROPBEAR_ENABLE_CBC_MODE 0
  #define DROPBEAR_ENABLE_CTR_MODE 1
  #define DROPBEAR_SHA1_HMAC 0
  #define DROPBEAR_DH_GROUP1 0
  #define DROPBEAR_DH_GROUP14_SHA1 0
  #define DROPBEAR_SHA1_96_HMAC 0
  #define DROPBEAR_SHA2_256_HMAC 1
  #define DROPBEAR_SHA2_512_HMAC 1
  #define DROPBEAR_DSS 0
  #define DROPBEAR_RSA 1
  #define DROPBEAR_ECDSA 0
  #define DROPBEAR_ECDH 0
  #define DROPBEAR_CURVE25519 0
  #define DROPBEAR_SVR_PASSWORD_AUTH 1
  #define DROPBEAR_CLI_PASSWORD_AUTH 1
  #define DROPBEAR_SVR_PUBKEY_AUTH 1
  #define DROPBEAR_CLI_PUBKEY_AUTH 1

The compile error is like this:

  arm-v5te-linux-gnueabi-gcc -c -Os -W -Wall -Wno-pointer-sign -fno-strict-
overflow -fPIE -fstack-protector-strong -D_FORTIFY_SOURCE=2  -I./libtomcrypt/
src/headers/ -DLOCALOPTIONS_H_EXISTS -I. -I. -DDROPBEAR_SERVER -
DDROPBEAR_CLIENT signkey.c -o signkey.o
  In file included from signkey.c:31:0:
  sk-ecdsa.h:11:44: error: unknown type name 'ecc_key'
  signkey.c: In function 'buf_get_pub_key':
  signkey.c:318:17: error: 'DROPBEAR_SIGNKEY_SK_ECDSA_NISTP256' undeclared   
(first use in this function)
  signkey.c:318:17: note: each undeclared identifier is reported only once for   
each function it appears in
  signkey.c: In function 'buf_verify':
  signkey.c:688:17: error: 'DROPBEAR_SIGNKEY_SK_ECDSA_NISTP256' undeclared   
(first use in this function)
  signkey.c:689:3: error: unknown type name 'ecc_key'
  signkey.c:689:20: error: 'ecc_key' undeclared (first use in this function)
  signkey.c:689:29: error: expected expression before ')' token
make[1]: *** [Makefile:154: signkey.o] Error 1

I looked into the dropbear code, and sk-ecdsa.h includes "includes.h" which 
itself includes "tomcrypt.h" and in some file of that 'ecc_key' is defined, so 
I don't know why the compiler complains here.  

Did not look into the other errors however.

Any ideas?

Greets
Alex