From: Alexander Dahl <ada@thorsis.com>
To: ptxdist@pengutronix.de
Cc: Fabian Godehardt <fg@emlix.com>
Subject: Re: [ptxdist] [PATCH 2/2] gpsd: Version bump to 3.17
Date: Thu, 15 Aug 2019 15:05:03 +0200 [thread overview]
Message-ID: <2490048.XehH1gQD2F@ada> (raw)
In-Reply-To: <20190815125619.27368-2-s.hauer@pengutronix.de>
Hello,
fyi, there were some patch sets sent to this list in January updating gpsd to
3.18.1 already. Those did not get merged though:
v3: https://www.mail-archive.com/ptxdist@pengutronix.de/msg13944.html
v4: https://www.mail-archive.com/ptxdist@pengutronix.de/msg13985.html
Greets
Alex
Am Donnerstag, 15. August 2019, 14:56:19 CEST schrieb Sascha Hauer:
> From: Fabian Godehardt <fg@emlix.com>
>
> This updates gpsd from 2.39 to 3.17. The build system has changed from
> autotools to scons in the meantime, so there are quite some changes
> necessary.
>
> Signed-off-by: Fabian Godehardt <fg@emlix.com>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> rules/gpsd.in | 30 ++++++++----
> rules/gpsd.make | 120 ++++++++++++++++++++++++++++--------------------
> 2 files changed, 90 insertions(+), 60 deletions(-)
>
> diff --git a/rules/gpsd.in b/rules/gpsd.in
> index ff270cff5..7a86967c4 100644
> --- a/rules/gpsd.in
> +++ b/rules/gpsd.in
> @@ -1,13 +1,14 @@
> ## SECTION=system_libraries
> menuconfig GPSD
> tristate
> + select HOST_PYTHON_SCONS
> select LIBC_M
> select LIBC_NSL
> select LIBC_PTHREAD
> select GCCLIBS_CXX
> select GCCLIBS_GCC_S
> - select NCURSES if GPSD_CGPS
> - select NCURSES if GPSD_GPSMON
> + select NCURSES if GPSD_NCURSES
> + select LIBUSB if GPSD_USB
> select DBUS_GLIB if GPSD_DBUS
> select PYTHON if GPSD_PYTHON
> prompt "gpsd "
> @@ -21,6 +22,19 @@ menuconfig GPSD
>
> if GPSD
>
> +config GPSD_NCURSES
> + bool
> + prompt "Enable tools using ncurses"
> + help
> + Some tools use ncurses as interface. Enable this to get
> + able to build them.
> +
> +config GPSD_USB
> + bool
> + prompt "Enable USB support"
> + help
> + Enable this to ineract with devices using USB interface.
> +
> config GPSD_PYTHON
> bool
> prompt "python bindings"
> @@ -68,6 +82,10 @@ config GPSD_MAX_DEVICES
>
> menu "drivers"
>
> + config GPSD_DRIVER_BLUEZ
> + bool
> + prompt "bluez"
> +
> config GPSD_DRIVER_NMEA
> bool
> prompt "nmea"
> @@ -208,14 +226,6 @@ menu "install options"
> received sentences to stdout. This makes the program
> useful as a pipe from gpsd to another program or file.
>
> - config GPSD_GPSFLASH
> - bool
> - prompt "gpsflash"
> - help
> - This program is a firmware loader for GPS receivers
> - connected via serial or USB port. Presently it supports
> - only SiRF GPSes.
> -
> config GPSD_GPXLOGGER
> bool
> prompt "gpxlogger"
> diff --git a/rules/gpsd.make b/rules/gpsd.make
> index cec308af9..bd664c4dd 100644
> --- a/rules/gpsd.make
> +++ b/rules/gpsd.make
> @@ -2,6 +2,9 @@
> #
> # Copyright (C) 2008 by J.Kilb
> # 2009 by Marc Kleine-Budde <mkl@pengutronix.de>
> +# 2019 by Fabian Godehardt <fg@emlix.com>
> +#
> +# See CREDITS for details about who has contributed to this project.
> #
> # For further information about the PTXdist project and license conditions
> # see the README file.
> @@ -15,11 +18,11 @@ PACKAGES-$(PTXCONF_GPSD) += gpsd
> #
> # Paths and names
> #
> -GPSD_VERSION := 2.39
> -GPSD_MD5 := 3db437196a6840c252fca99b6c19d4d0
> +GPSD_VERSION := 3.17
> +GPSD_MD5 := e0cfadcf4a65dfbdd2afb11c58f4e4a1
> GPSD := gpsd-$(GPSD_VERSION)
> GPSD_SUFFIX := tar.gz
> -GPSD_URL := $(call ptx/mirror, SF, gpsd.berlios/$(GPSD).$(GPSD_SUFFIX))
> +GPSD_URL :=
> http://download-mirror.savannah.gnu.org/releases/gpsd/$(GPSD).$(GPSD_SUFFIX
> ) GPSD_SOURCE := $(SRCDIR)/$(GPSD).$(GPSD_SUFFIX)
> GPSD_DIR := $(BUILDDIR)/$(GPSD)
>
> @@ -27,58 +30,78 @@ GPSD_DIR := $(BUILDDIR)/$(GPSD)
> # Prepare
> #
> ---------------------------------------------------------------------------
> -
>
> -GPSD_ENV = \
> - $(CROSS_ENV) \
> - PYTHON=$(CROSS_PYTHON)
> +GPSD_CONF_TOOL := NO
>
> -#
> -# autoconf
> -#
> -GPSD_AUTOCONF := \
> - $(CROSS_AUTOCONF_USR) \
> - --without-x \
> - --$(call ptx/endis, PTXCONF_GPSD_PYTHON)-python \
> - --$(call ptx/endis, PTXCONF_GPSD_PROFILING)-profiling \
> - --$(call ptx/endis, PTXCONF_GPSD_NTPSHM)-ntpshm \
> - --$(call ptx/endis, PTXCONF_GPSD_PPS)-pps \
> - --$(call ptx/endis, PTXCONF_GPSD_PPS_ON_CTS)-pps-on-cts \
> - --$(call ptx/endis, PTXCONF_GPSD_DBUS)-dbus \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_NMEA)-nmea \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_SIRF)-sirf \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_TSIP)-tsip \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_FV18)-fv18 \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_TRIPMATE)-tripmate \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_EARTHMATE)-earthmate \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_ITRAX)-itrax \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_ASHTECH)-ashtech \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_NAVCOM)-navcom \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_GARMIN)-garmin \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_GARMINTXT)-garmintxt \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_TNT)-tnt \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_UBX)-ubx \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_EVERMORE)-evermore \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_GPSCLOCK)-gpsclock \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_RTCM104V2)-rtcm104v2 \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_RTCM104V3)-rtcm104v3 \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_NTRIP)-ntrip \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_SUPERSTAR2)-superstar2 \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_OCEANSERVER)-oceanserver \
> - --$(call ptx/endis, PTXCONF_GPSD_DRIVER_MKT3301)-mkt3301
> +# we set directory entries to installation folder as
> +# the scons script currently ignores a DESTDIR etc.
> +GPSD_ENV = \
> + target=$(PTXCONF_GNU_TARGET) \
> + prefix=$(prefix) \
> + shared=yes \
> + sbindir=$(GPSD_PKGDIR)/usr/sbin \
> + bindir=$(GPSD_PKGDIR)/usr/sbin \
> + includedir=$(GPSD_PKGDIR)/usr/include \
> + libdir=$(GPSD_PKGDIR)/usr/lib \
> + docdir=$(GPSD_PKGDIR)/usr/share/doc \
> + mandir=$(GPSD_PKGDIR)/usr/share/man \
> + ncurses=$(call ptx/yesno, PTXCONF_GPSD_NCURSES) \
> + usb=$(call ptx/yesno, PTXCONF_GPSD_USB) \
> + bluez=$(call ptx/yesno, PTXCONF_GPSD_BLUEZ) \
> + python=$(call ptx/yesno, PTXCONF_GPSD_PYTHON) \
> + profiling=$(call ptx/yesno, PTXCONF_GPSD_PROFILING) \
> + ntpshm=$(call ptx/yesno, PTXCONF_GPSD_NTPSHM) \
> + pps=$(call ptx/yesno, PTXCONF_GPSD_PPS) \
> + dbus_export=$(call ptx/yesno, PTXCONF_GPSD_DBUS) \
> + nmea0183=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_NMEA) \
> + sirf=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_SIRF) \
> + tsip=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_TSIP) \
> + fv18=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_FV18) \
> + tripmate=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_TRIPMATE) \
> + earthmate=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_EARTHMATE) \
> + itrax=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_ITRAX) \
> + ashtech=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_ASHTECH) \
> + navcom=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_NAVCOM) \
> + garmin=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_GARMIN) \
> + garmintxt=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_GARMINTXT) \
> + tnt=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_TNT) \
> + ubx=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_UBX) \
> + evermore=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_EVERMORE) \
> + gpsclock=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_GPSCLOCK) \
> + rtcm104v2=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_RTCM104V2) \
> + rtcm104v3=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_RTCM104V3) \
> + ntrip=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_NTRIP) \
> + superstar2=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_SUPERSTAR2) \
> + oceanserver=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_OCEANSERVER) \
> + mkt3301=$(call ptx/yesno, PTXCONF_GPSD_DRIVER_MKT3301)
>
> ifneq ($(call remove_quotes,$(PTXCONF_GPSD_USER)),)
> -GPSD_AUTOCONF += --enable-gpsd-user=$(PTXCONF_GPSD_USER)
> +GPSD_ENV += gpsd-user=$(PTXCONF_GPSD_USER)
> endif
> ifneq ($(call remove_quotes,$(PTXCONF_GPSD_FIXED_PORT_SPEED)),)
> -GPSD_AUTOCONF += --enable-fixed-port-speed=$(PTXCONF_GPSD_FIXED_PORT_SPEED)
> +GPSD_ENV += fixed-port-speed=$(PTXCONF_GPSD_FIXED_PORT_SPEED)
> endif
>
> ifneq ($(call remove_quotes,$(PTXCONF_GPSD_MAX_CLIENTS)),)
> -GPSD_AUTOCONF += --enable-max-clients=$(PTXCONF_GPSD_MAX_CLIENTS)
> +GPSD_ENV += max-clients=$(PTXCONF_GPSD_MAX_CLIENTS)
> endif
> ifneq ($(call remove_quotes,$(PTXCONF_GPSD_MAX_DEVICES)),)
> -GPSD_AUTOCONF += --enable-max-devices=$(PTXCONF_GPSD_MAX_DEVICES)
> +GPSD_ENV += max-devices=$(PTXCONF_GPSD_MAX_DEVICES)
> endif
>
> +$(STATEDIR)/gpsd.prepare:
> + @$(call targetinfo)
> + @scons -C $(GPSD_DIR) $(GPSD_ENV)
> + @$(call touch)
> +
> +$(STATEDIR)/gpsd.compile:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +$(STATEDIR)/gpsd.install:
> + @$(call targetinfo)
> + @scons -C $(GPSD_DIR) $(GPSD_ENV) install
> + @$(call touch)
> +
> #
> ---------------------------------------------------------------------------
> - # Target-Install
> #
> ---------------------------------------------------------------------------
> - @@ -98,16 +121,13 @@ ifdef PTXCONF_GPSD_GPSD
> @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd)
> endif
> ifdef PTXCONF_GPSD_GPSCTL
> - @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpsctl)
> + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsctl)
> endif
> ifdef PTXCONF_GPSD_GPSPIPE
> - @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpspipe)
> -endif
> -ifdef PTXCONF_GPSD_GPSFLASH
> - @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpsflash)
> + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpspipe)
> endif
> ifdef PTXCONF_GPSD_GPXLOGGER
> - @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpxlogger)
> + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpxlogger)
> endif
> ifdef PTXCONF_GPSD_CGPS
> @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/cgps)
> @@ -116,7 +136,7 @@ ifdef PTXCONF_GPSD_GPSMON
> @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpsmon)
> endif
> ifdef PTXCONF_GPSD_GPSDECODE
> - @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/bin/gpsdecode)
> + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdecode)
> endif
>
> ifdef PTXCONF_GPSD_GPSCAT
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2019-08-15 13:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-15 12:56 [ptxdist] [PATCH 1/2] host-python-scons: Fix host-python-scons package installation Sascha Hauer
2019-08-15 12:56 ` [ptxdist] [PATCH 2/2] gpsd: Version bump to 3.17 Sascha Hauer
2019-08-15 13:05 ` Alexander Dahl [this message]
2019-08-15 13:18 ` Sascha Hauer
2019-08-16 6:11 ` Denis OSTERLAND
2019-08-16 9:00 ` Sascha Hauer
2019-08-16 5:55 ` [ptxdist] [PATCH 1/2] host-python-scons: Fix host-python-scons package installation Denis OSTERLAND
2019-08-16 8:58 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2490048.XehH1gQD2F@ada \
--to=ada@thorsis.com \
--cc=fg@emlix.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox