From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from mail-oa0-f53.google.com ([209.85.219.53])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1TsrhR-000153-Q5
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:11:55 +0100
Received: by mail-oa0-f53.google.com with SMTP id j6so741023oag.12
	for <ptxdist@pengutronix.de>; Wed, 09 Jan 2013 01:11:47 -0800 (PST)
MIME-Version: 1.0
In-Reply-To: <BAY171-W136658A7BB3723DAC84ED63E22B0@phx.gbl>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
	<CAOP6b3hZGi2+2q7cU8kiy-J8Lv4A5Qz2Ej+E1K9aKiGjHZb0XQ@mail.gmail.com>
	<BAY171-W136658A7BB3723DAC84ED63E22B0@phx.gbl>
Date: Wed, 9 Jan 2013 11:11:47 +0200
Message-ID: <CAOP6b3g8UYSbazf1ACZnpjJ6P00MQ_K3bLKtdJ5_g8AZDe6Hag@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============1453847719=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============1453847719==
Content-Type: multipart/alternative; boundary=e89a8f50395eb298f104d2d7739b

--e89a8f50395eb298f104d2d7739b
Content-Type: text/plain; charset=ISO-8859-1

cool thanks guys, will play around some more, at least I got some new ideas.



On Wed, Jan 9, 2013 at 11:08 AM, dave festing <dave_festing@hotmail.com>wrote:

>  I don't know.
>
> ------------------------------
> Date: Wed, 9 Jan 2013 11:04:19 +0200
> From: lfxciii@gmail.com
> To: ptxdist@pengutronix.de
> Subject: Re: [ptxdist] tslib location compiled by PTxdist
>
>
> thank you Dave, will try it. Do you perhaps know which qmake.conf to
> change to include this path? I just need to be sure.
>
> thanks
>
> On Wed, Jan 9, 2013 at 11:01 AM, Ruben Louw <lfxciii@gmail.com> wrote:
>
> Hi Tim
>
> Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
> 2012.09.1?
>
> Regards
>
>
>
> On Wed, Jan 9, 2013 at 10:57 AM, Tim Sander <tim@krieglstein.org> wrote:
>
> Hi Ruben
>
> I have just noticed that with the change to the wrapper based
> configuration the
> qmake based building has become much more inconvinent. I would recommend
> that you use a older (e.g.2012.09.1) ptxdist version where qmake
> configures the
> projects correctly out of the box. Then your problems with qtcreator should
> also go away.
>
> Best regards
> Tim
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
>
>
>
> -- ptxdist mailing list ptxdist@pengutronix.de
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
>

--e89a8f50395eb298f104d2d7739b
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

cool thanks guys, will play around some more, at least I got some new ideas=
.<br><br><br><br><div class=3D"gmail_quote">On Wed, Jan 9, 2013 at 11:08 AM=
, dave festing <span dir=3D"ltr">&lt;<a href=3D"mailto:dave_festing@hotmail=
.com" target=3D"_blank">dave_festing@hotmail.com</a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">


<div><div dir=3D"ltr">
I don&#39;t know.<br><br><div><div></div><hr>Date: Wed, 9 Jan 2013 11:04:19=
 +0200<br>From: <a href=3D"mailto:lfxciii@gmail.com" target=3D"_blank">lfxc=
iii@gmail.com</a><br>To: <a href=3D"mailto:ptxdist@pengutronix.de" target=
=3D"_blank">ptxdist@pengutronix.de</a><br>
Subject: Re: [ptxdist] tslib location compiled by PTxdist<div><div class=3D=
"h5"><br><br>thank you Dave, will try it. Do you perhaps know which qmake.c=
onf to change to include this path? I just need to be sure.<br><br>thanks<b=
r>
<br><div>On Wed, Jan 9, 2013 at 11:01 AM, Ruben Louw <span dir=3D"ltr">&lt;=
<a href=3D"mailto:lfxciii@gmail.com" target=3D"_blank">lfxciii@gmail.com</a=
>&gt;</span> wrote:<br>
<blockquote style=3D"border-left:1px #ccc solid;padding-left:1ex">Hi Tim<br=
><br>Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist =
2012.09.1?<br><br>Regards<div>
<div><br><br><br><div>On Wed, Jan 9, 2013 at 10:57 AM, Tim Sander <span dir=
=3D"ltr">&lt;<a href=3D"mailto:tim@krieglstein.org" target=3D"_blank">tim@k=
rieglstein.org</a>&gt;</span> wrote:<br>
<blockquote style=3D"border-left:1px #ccc solid;padding-left:1ex">Hi Ruben<=
br>
<br>
I have just noticed that with the change to the wrapper based configuration=
 the<br>
qmake based building has become much more inconvinent. I would recommend<br=
>
that you use a older (e.g.2012.09.1) ptxdist version where qmake configures=
 the<br>
projects correctly out of the box. Then your problems with qtcreator should=
<br>
also go away.<br>
<br>
Best regards<br>
<span><font color=3D"#888888">Tim<br>
<br>
--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de" target=3D"_blank">ptxdist@pengutr=
onix.de</a><br>
</font></span></blockquote></div><br>
</div></div></blockquote></div><br>
<br>--=20
ptxdist mailing list
<a href=3D"mailto:ptxdist@pengutronix.de" target=3D"_blank">ptxdist@pengutr=
onix.de</a></div></div></div> 		 	   		  </div></div>
<br>--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de">ptxdist@pengutronix.de</a><br>
<br></blockquote></div><br>

--e89a8f50395eb298f104d2d7739b--


--===============1453847719==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============1453847719==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from lvps176-28-13-145.dedicated.hosteurope.de ([176.28.13.145])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <tim@krieglstein.org>) id 1TsrbA-0000ZY-UP
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:05:25 +0100
Received: from dabox.localnet (unknown [62.159.134.146])
	by lvps176-28-13-145.dedicated.hosteurope.de (Postfix) with ESMTPSA id
	BA49EA8A407B
	for <ptxdist@pengutronix.de>; Wed,  9 Jan 2013 10:05:24 +0100 (CET)
From: Tim Sander <tim@krieglstein.org>
Date: Wed, 09 Jan 2013 10:05:24 +0100
Message-ID: <7302733.Ok8j4F67PF@dabox>
In-Reply-To: <CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
MIME-Version: 1.0
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

Hi Ruben
> Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
> 2012.09.1?
I think it should work, you have to do a "ptxdist migrate" though.
Tim

-- 
ptxdist mailing list
ptxdist@pengutronix.de

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from bay0-omc4-s4.bay0.hotmail.com ([65.54.190.206])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <dave_festing@hotmail.com>) id 1TsreA-0000jc-AV
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:08:31 +0100
Message-ID: <BAY171-W136658A7BB3723DAC84ED63E22B0@phx.gbl>
From: dave festing <dave_festing@hotmail.com>
Date: Wed, 9 Jan 2013 09:08:21 +0000
In-Reply-To: <CAOP6b3hZGi2+2q7cU8kiy-J8Lv4A5Qz2Ej+E1K9aKiGjHZb0XQ@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>,
	<1530397.faQrsKHOXN@dabox>,
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>,
	<CAOP6b3hZGi2+2q7cU8kiy-J8Lv4A5Qz2Ej+E1K9aKiGjHZb0XQ@mail.gmail.com>
MIME-Version: 1.0
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============1621390323=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============1621390323==
Content-Type: multipart/alternative;
	boundary="_8596a990-4de4-440b-8322-2b44e35ba9d7_"

--_8596a990-4de4-440b-8322-2b44e35ba9d7_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable


I don't know.

Date: Wed=2C 9 Jan 2013 11:04:19 +0200
From: lfxciii@gmail.com
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] tslib location compiled by PTxdist

thank you Dave=2C will try it. Do you perhaps know which qmake.conf to chan=
ge to include this path? I just need to be sure.

thanks

On Wed=2C Jan 9=2C 2013 at 11:01 AM=2C Ruben Louw <lfxciii@gmail.com> wrote=
:

Hi Tim

Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist 2012.=
09.1?

Regards



On Wed=2C Jan 9=2C 2013 at 10:57 AM=2C Tim Sander <tim@krieglstein.org> wro=
te:

Hi Ruben



I have just noticed that with the change to the wrapper based configuration=
 the

qmake based building has become much more inconvinent. I would recommend

that you use a older (e.g.2012.09.1) ptxdist version where qmake configures=
 the

projects correctly out of the box. Then your problems with qtcreator should

also go away.



Best regards

Tim



--

ptxdist mailing list

ptxdist@pengutronix.de






--=20
ptxdist mailing list
ptxdist@pengutronix.de 		 	   		  =

--_8596a990-4de4-440b-8322-2b44e35ba9d7_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 10pt=3B
font-family:Tahoma
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>
I don't know.<br><br><div><div id=3D"SkyDrivePlaceholder"></div><hr id=3D"s=
topSpelling">Date: Wed=2C 9 Jan 2013 11:04:19 +0200<br>From: lfxciii@gmail.=
com<br>To: ptxdist@pengutronix.de<br>Subject: Re: [ptxdist] tslib location =
compiled by PTxdist<br><br>thank you Dave=2C will try it. Do you perhaps kn=
ow which qmake.conf to change to include this path? I just need to be sure.=
<br><br>thanks<br><br><div class=3D"ecxgmail_quote">On Wed=2C Jan 9=2C 2013=
 at 11:01 AM=2C Ruben Louw <span dir=3D"ltr">&lt=3B<a href=3D"mailto:lfxcii=
i@gmail.com">lfxciii@gmail.com</a>&gt=3B</span> wrote:<br>
<blockquote class=3D"ecxgmail_quote" style=3D"border-left:1px #ccc solid=3B=
padding-left:1ex">Hi Tim<br><br>Thanks for the advice. Can I still use the =
2012.12.0 BSP with ptxdist 2012.09.1?<br><br>Regards<div class=3D"ecxHOEnZb=
">
<div class=3D"h5"><br><br><br><div class=3D"ecxgmail_quote">On Wed=2C Jan 9=
=2C 2013 at 10:57 AM=2C Tim Sander <span dir=3D"ltr">&lt=3B<a href=3D"mailt=
o:tim@krieglstein.org">tim@krieglstein.org</a>&gt=3B</span> wrote:<br>
<blockquote class=3D"ecxgmail_quote" style=3D"border-left:1px #ccc solid=3B=
padding-left:1ex">Hi Ruben<br>
<br>
I have just noticed that with the change to the wrapper based configuration=
 the<br>
qmake based building has become much more inconvinent. I would recommend<br=
>
that you use a older (e.g.2012.09.1) ptxdist version where qmake configures=
 the<br>
projects correctly out of the box. Then your problems with qtcreator should=
<br>
also go away.<br>
<br>
Best regards<br>
<span><font color=3D"#888888">Tim<br>
<br>
--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de">ptxdist@pengutronix.de</a><br>
</font></span></blockquote></div><br>
</div></div></blockquote></div><br>
<br>--=20
ptxdist mailing list
ptxdist@pengutronix.de</div> 		 	   		  </div></body>
</html>=

--_8596a990-4de4-440b-8322-2b44e35ba9d7_--


--===============1621390323==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============1621390323==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from bay0-omc4-s16.bay0.hotmail.com ([65.54.190.218])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <dave_festing@hotmail.com>) id 1TsrWx-0008Lp-VG
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:01:07 +0100
Message-ID: <BAY171-W65489F88B1C96C7381B824E22B0@phx.gbl>
From: dave festing <dave_festing@hotmail.com>
Date: Wed, 9 Jan 2013 09:00:53 +0000
In-Reply-To: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
MIME-Version: 1.0
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============0579348953=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============0579348953==
Content-Type: multipart/alternative;
	boundary="_db8b94bc-ec39-4edf-809d-51a1d279ce8e_"

--_db8b94bc-ec39-4edf-809d-51a1d279ce8e_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable


find -name tslib* -print

in your /home/Pengutronix BSP directory/platform-mini2440/root/

Date: Wed=2C 9 Jan 2013 10:45:04 +0200
From: lfxciii@gmail.com
To: ptxdist@pengutronix.de
Subject: [ptxdist] tslib location compiled by PTxdist

Hi everyone

Does anyone know where ptxdist ompiles the tslib used for Qt on the target =
board?

I'm having some trouble locating it.

Any advice welcome.

Thanks in advanced

Ruben=20


--=20
ptxdist mailing list
ptxdist@pengutronix.de 		 	   		  =

--_db8b94bc-ec39-4edf-809d-51a1d279ce8e_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<html>
<head>
<style><!--
.hmmessage P
{
margin:0px=3B
padding:0px
}
body.hmmessage
{
font-size: 10pt=3B
font-family:Tahoma
}
--></style></head>
<body class=3D'hmmessage'><div dir=3D'ltr'>
find -name tslib* -print<br><br>in your /home/Pengutronix BSP directory/pla=
tform-mini2440/root/<br><br><div><div id=3D"SkyDrivePlaceholder"></div><hr =
id=3D"stopSpelling">Date: Wed=2C 9 Jan 2013 10:45:04 +0200<br>From: lfxciii=
@gmail.com<br>To: ptxdist@pengutronix.de<br>Subject: [ptxdist] tslib locati=
on compiled by PTxdist<br><br>Hi everyone<br><br>Does anyone know where ptx=
dist ompiles the tslib used for Qt on the target board?<br><br>I'm having s=
ome trouble locating it.<br><br>Any advice welcome.<br><br>Thanks in advanc=
ed<br><br>Ruben <br>
<br>--=20
ptxdist mailing list
ptxdist@pengutronix.de</div> 		 	   		  </div></body>
</html>=

--_db8b94bc-ec39-4edf-809d-51a1d279ce8e_--


--===============0579348953==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============0579348953==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from mail-oa0-f43.google.com ([209.85.219.43])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1TsraE-0000Gs-9g
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:04:27 +0100
Received: by mail-oa0-f43.google.com with SMTP id k1so733344oag.30
	for <ptxdist@pengutronix.de>; Wed, 09 Jan 2013 01:04:19 -0800 (PST)
MIME-Version: 1.0
In-Reply-To: <CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
Date: Wed, 9 Jan 2013 11:04:19 +0200
Message-ID: <CAOP6b3hZGi2+2q7cU8kiy-J8Lv4A5Qz2Ej+E1K9aKiGjHZb0XQ@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============1110134157=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============1110134157==
Content-Type: multipart/alternative; boundary=f46d0444edb1ffc28004d2d75807

--f46d0444edb1ffc28004d2d75807
Content-Type: text/plain; charset=ISO-8859-1

thank you Dave, will try it. Do you perhaps know which qmake.conf to change
to include this path? I just need to be sure.

thanks

On Wed, Jan 9, 2013 at 11:01 AM, Ruben Louw <lfxciii@gmail.com> wrote:

> Hi Tim
>
> Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
> 2012.09.1?
>
> Regards
>
>
>
> On Wed, Jan 9, 2013 at 10:57 AM, Tim Sander <tim@krieglstein.org> wrote:
>
>> Hi Ruben
>>
>> I have just noticed that with the change to the wrapper based
>> configuration the
>> qmake based building has become much more inconvinent. I would recommend
>> that you use a older (e.g.2012.09.1) ptxdist version where qmake
>> configures the
>> projects correctly out of the box. Then your problems with qtcreator
>> should
>> also go away.
>>
>> Best regards
>> Tim
>>
>> --
>> ptxdist mailing list
>> ptxdist@pengutronix.de
>>
>
>

--f46d0444edb1ffc28004d2d75807
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

thank you Dave, will try it. Do you perhaps know which qmake.conf to change=
 to include this path? I just need to be sure.<br><br>thanks<br><br><div cl=
ass=3D"gmail_quote">On Wed, Jan 9, 2013 at 11:01 AM, Ruben Louw <span dir=
=3D"ltr">&lt;<a href=3D"mailto:lfxciii@gmail.com" target=3D"_blank">lfxciii=
@gmail.com</a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">Hi Tim<br><br>Thanks for the advice. Can I s=
till use the 2012.12.0 BSP with ptxdist 2012.09.1?<br><br>Regards<div class=
=3D"HOEnZb">
<div class=3D"h5"><br><br><br><div class=3D"gmail_quote">On Wed, Jan 9, 201=
3 at 10:57 AM, Tim Sander <span dir=3D"ltr">&lt;<a href=3D"mailto:tim@krieg=
lstein.org" target=3D"_blank">tim@krieglstein.org</a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">Hi Ruben<br>
<br>
I have just noticed that with the change to the wrapper based configuration=
 the<br>
qmake based building has become much more inconvinent. I would recommend<br=
>
that you use a older (e.g.2012.09.1) ptxdist version where qmake configures=
 the<br>
projects correctly out of the box. Then your problems with qtcreator should=
<br>
also go away.<br>
<br>
Best regards<br>
<span><font color=3D"#888888">Tim<br>
<br>
--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de" target=3D"_blank">ptxdist@pengutr=
onix.de</a><br>
</font></span></blockquote></div><br>
</div></div></blockquote></div><br>

--f46d0444edb1ffc28004d2d75807--


--===============1110134157==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============1110134157==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from lvps176-28-13-145.dedicated.hosteurope.de ([176.28.13.145])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <tim@krieglstein.org>) id 1TsrTh-0007yN-CG
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 09:57:42 +0100
Received: from dabox.localnet (unknown [213.157.30.20])
	by lvps176-28-13-145.dedicated.hosteurope.de (Postfix) with ESMTPSA id
	07C87A8A407B
	for <ptxdist@pengutronix.de>; Wed,  9 Jan 2013 09:57:41 +0100 (CET)
From: Tim Sander <tim@krieglstein.org>
Date: Wed, 09 Jan 2013 09:57:40 +0100
Message-ID: <1530397.faQrsKHOXN@dabox>
In-Reply-To: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
MIME-Version: 1.0
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

Hi Ruben

I have just noticed that with the change to the wrapper based configuration the 
qmake based building has become much more inconvinent. I would recommend
that you use a older (e.g.2012.09.1) ptxdist version where qmake configures the 
projects correctly out of the box. Then your problems with qtcreator should 
also go away.

Best regards
Tim

-- 
ptxdist mailing list
ptxdist@pengutronix.de

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
From: Juergen Beisert <jbe@pengutronix.de>
Date: Wed, 9 Jan 2013 10:59:31 +0100
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<201301091014.19071.jbe@pengutronix.de>
	<CAOP6b3jcefipmst5hCGsf8BOQYXnPQji75faz_h9OrpQe9heVA@mail.gmail.com>
In-Reply-To: <CAOP6b3jcefipmst5hCGsf8BOQYXnPQji75faz_h9OrpQe9heVA@mail.gmail.com>
MIME-Version: 1.0
Content-Disposition: inline
Message-Id: <201301091059.31941.jbe@pengutronix.de>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: Ruben Louw <lfxciii@gmail.com>
Cc: ptxdist@pengutronix.de

Hi Ruben,

Ruben Louw wrote:
> I think I made a mistake then, when building the BSP, I just used ptxdist
> select configs/ptxconfig.qt, and ptxdist platform configs/platform...128
> then ptxdist go. do I have to build qt amd the tslib seperately using
> ptxdist targetinstall qt4?

No, you didn't made a mistake. "ptxdist go" builds everything enabled in the 
menuconfig. "ptxdist targetinstall qt4" just compiles one of the enabled 
packages. I have used this command, to speed up my test, if the tslib is 
built correctly.

So: also when you run "ptxdist go" with "configs/ptxconfig.qt" selected, the 
tslib should be at the same location like here on my host, when PTXdist 
finishes its work.

> I'm still trying to figure out how ptxdist works, going through the doc you
> sent and making sense of it.
>
> Please bare with me.

You're welcome.

Regards,
Juergen

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from www.weihenstephan.org ([80.190.177.12])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1Tst4f-0005Ok-03
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 11:39:57 +0100
Received: from isonoe.hi.pengutronix.de (port-212-202-120-50.static.qsc.de
	[212.202.120.50])
	by www.weihenstephan.org (Postfix) with ESMTPSA id E9CCE481D9C
	for <ptxdist@pengutronix.de>; Wed,  9 Jan 2013 11:37:44 +0100 (CET)
Resent-To: ptxdist@pengutronix.de
Resent-Message-ID: <201301091139.14738.lfxciii@gmail.com>
MIME-Version: 1.0
In-Reply-To: <201301091059.31941.jbe@pengutronix.de>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<201301091014.19071.jbe@pengutronix.de>
	<CAOP6b3jcefipmst5hCGsf8BOQYXnPQji75faz_h9OrpQe9heVA@mail.gmail.com>
	<201301091059.31941.jbe@pengutronix.de>
Date: Wed, 9 Jan 2013 12:37:46 +0200
Message-ID: <CAOP6b3hEr=-Rdq4=YwG-BR9TNGk76jfX+KPcX=+5ORk4W53i=Q@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============0004441910=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: Juergen Beisert <jbe@pengutronix.de>

--===============0004441910==
Content-Type: multipart/alternative;
  boundary=e89a8ff1c25431817f04d2d8a7f8

--e89a8ff1c25431817f04d2d8a7f8
Content-Type: text/plain; charset=ISO-8859-1

Hi Juergen

Glad to hear I didnt make a mistake and good to know what targetinstall
means. The thing is, as far as I can see, is that I need to specify the lib
path to qmake.conf. But I'm not sure which qmake.conf will be used when
building my app, do you perhaps know?

Thanks for your help.

Ruben




On Wed, Jan 9, 2013 at 11:59 AM, Juergen Beisert <jbe@pengutronix.de> wrote:

> Hi Ruben,
>
> Ruben Louw wrote:
> > I think I made a mistake then, when building the BSP, I just used ptxdist
> > select configs/ptxconfig.qt, and ptxdist platform configs/platform...128
> > then ptxdist go. do I have to build qt amd the tslib seperately using
> > ptxdist targetinstall qt4?
>
> No, you didn't made a mistake. "ptxdist go" builds everything enabled in
> the
> menuconfig. "ptxdist targetinstall qt4" just compiles one of the enabled
> packages. I have used this command, to speed up my test, if the tslib is
> built correctly.
>
> So: also when you run "ptxdist go" with "configs/ptxconfig.qt" selected,
> the
> tslib should be at the same location like here on my host, when PTXdist
> finishes its work.
>
> > I'm still trying to figure out how ptxdist works, going through the doc
> you
> > sent and making sense of it.
> >
> > Please bare with me.
>
> You're welcome.
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K.                              | Juergen Beisert
>   |
> Linux Solutions for Science and Industry      | http://www.pengutronix.de/ |
>

--e89a8ff1c25431817f04d2d8a7f8
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Juergen<br><br>Glad to hear I didnt make a mistake and good to know what=
 targetinstall means. The thing is, as far as I can see, is that I need to =
specify the lib path to qmake.conf. But I&#39;m not sure which qmake.conf w=
ill be used when building my app, do you perhaps know?<br>
<br>Thanks for your help.<br><br>Ruben<br><br><br><br><br><div class=3D"gma=
il_quote">On Wed, Jan 9, 2013 at 11:59 AM, Juergen Beisert <span dir=3D"ltr=
">&lt;<a href=3D"mailto:jbe@pengutronix.de" target=3D"_blank">jbe@pengutron=
ix.de</a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex"><div class=3D"im">Hi Ruben,<br>
<br>
Ruben Louw wrote:<br>
</div><div class=3D"im">&gt; I think I made a mistake then, when building t=
he BSP, I just used ptxdist<br>
&gt; select configs/ptxconfig.qt, and ptxdist platform configs/platform...1=
28<br>
&gt; then ptxdist go. do I have to build qt amd the tslib seperately using<=
br>
&gt; ptxdist targetinstall qt4?<br>
<br>
</div>No, you didn&#39;t made a mistake. &quot;ptxdist go&quot; builds ever=
ything enabled in the<br>
menuconfig. &quot;ptxdist targetinstall qt4&quot; just compiles one of the =
enabled<br>
packages. I have used this command, to speed up my test, if the tslib is<br=
>
built correctly.<br>
<br>
So: also when you run &quot;ptxdist go&quot; with &quot;configs/ptxconfig.q=
t&quot; selected, the<br>
tslib should be at the same location like here on my host, when PTXdist<br>
finishes its work.<br>
<div class=3D"im"><br>
&gt; I&#39;m still trying to figure out how ptxdist works, going through th=
e doc you<br>
&gt; sent and making sense of it.<br>
&gt;<br>
&gt; Please bare with me.<br>
<br>
</div>You&#39;re welcome.<br>
<div class=3D"HOEnZb"><div class=3D"h5"><br>
Regards,<br>
Juergen<br>
<br>
--<br>
Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 |<br>
Linux Solutions for Science and Industry =A0 =A0 =A0| <a href=3D"http://www=
.pengutronix.de/" target=3D"_blank">http://www.pengutronix.de/</a> =A0|<br>
</div></div></blockquote></div><br>

--e89a8ff1c25431817f04d2d8a7f8--


--===============0004441910==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============0004441910==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from mail-ob0-f175.google.com ([209.85.214.175])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1TsrHa-0007G2-Pr
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 09:45:11 +0100
Received: by mail-ob0-f175.google.com with SMTP id vb8so1908582obc.6
	for <ptxdist@pengutronix.de>; Wed, 09 Jan 2013 00:45:04 -0800 (PST)
MIME-Version: 1.0
Date: Wed, 9 Jan 2013 10:45:04 +0200
Message-ID: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============1877121569=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============1877121569==
Content-Type: multipart/alternative; boundary=e89a8ff1c60a20471f04d2d7145f

--e89a8ff1c60a20471f04d2d7145f
Content-Type: text/plain; charset=ISO-8859-1

Hi everyone

Does anyone know where ptxdist ompiles the tslib used for Qt on the target
board?

I'm having some trouble locating it.

Any advice welcome.

Thanks in advanced

Ruben

--e89a8ff1c60a20471f04d2d7145f
Content-Type: text/html; charset=ISO-8859-1

Hi everyone<br><br>Does anyone know where ptxdist ompiles the tslib used for Qt on the target board?<br><br>I&#39;m having some trouble locating it.<br><br>Any advice welcome.<br><br>Thanks in advanced<br><br>Ruben <br>

--e89a8ff1c60a20471f04d2d7145f--


--===============1877121569==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============1877121569==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from mail-vb0-f53.google.com ([209.85.212.53])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1TsvGM-00053z-SV
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 14:00:12 +0100
Received: by mail-vb0-f53.google.com with SMTP id b23so1461129vbz.26
	for <ptxdist@pengutronix.de>; Wed, 09 Jan 2013 05:00:04 -0800 (PST)
MIME-Version: 1.0
In-Reply-To: <2038716.oDZmalDhO0@dabox>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
	<2038716.oDZmalDhO0@dabox>
Date: Wed, 9 Jan 2013 15:00:04 +0200
Message-ID: <CAOP6b3joPzw0YZa+BsYutB5fsny6r===LiQ_SJpVMftAs3DCVQ@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============0724333669=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============0724333669==
Content-Type: multipart/alternative; boundary=14dae9d253b412a57304d2daa443

--14dae9d253b412a57304d2daa443
Content-Type: text/plain; charset=ISO-8859-1

HI all

I managed to get Qt Cerator to compile my mini2440 program, seems easy now,
but it kept me busy. I dont know if anyone would ever use this, but I
include it here just for reference.

 File to edit:/home/username/OSELAS.BSP-Pengutronix-Mini2440-2012.12.0/platform-mini2440/sysroot-target/usr/mkspecs/qws/linux-ptx-g++/qmake.confEntry:QMAKE_LFLAGS
= -Wl,-rpath-link=/home/username/OSELAS.BSP-Pengutronix-Mini2440-2012.12.0/platform-mini2440/sysroot-target/usr/lib

Now, to get the debugger going.

@Everyone that helped me, thanks a lot, I appreciate it.

Regards

Ruben

On Wed, Jan 9, 2013 at 11:03 AM, Tim Sander <tim.sander@hbm.com> wrote:

> Hi Ruben
> > Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
> > 2012.09.1?
> I think it should work, you have to do a "ptxdist migrate" though.
> Tim
>
> Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt,
> Germany | www.hbm.com
>
> Registered as GmbH (German limited liability corporation) in the
> commercial register at the local court of Darmstadt, HRB 1147
> Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the
> board: James Charles Webster
>
> Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister
> des Amtsgerichts Darmstadt unter HRB 1147
> Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst
> | Aufsichtsratsvorsitzender: James Charles Webster
>
> The information in this email is confidential. It is intended solely for
> the addressee. If you are not the intended recipient, please let me know
> and delete this email.
>
> Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich
> fur den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger
> sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>

--14dae9d253b412a57304d2daa443
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

HI all<br><br>I managed to get Qt Cerator to compile my mini2440 program, s=
eems easy now, but it kept me busy. I dont know if anyone would ever use th=
is, but I include it here just for reference. <br><br>


=09
=09
=09
	<style type=3D"text/css">
	<!--
		@page { margin: 2cm }
		PRE.cjk { font-family: "DejaVu Sans", monospace }
		P { margin-bottom: 0.21cm }
	-->
	</style>


<pre class=3D"western" style=3D"margin-bottom:0.5cm;font-style:normal;text-=
decoration:none"><font color=3D"#000000"><span style=3D"background:transpar=
ent">File to edit:</span></font>
<font color=3D"#000000"><span style=3D"background:transparent">/home/userna=
me/OSELAS.BSP-Pengutronix-Mini2440-2012.12.0/platform-mini2440/sysroot-targ=
et/usr/mkspecs/qws/linux-ptx-g++/qmake.conf</span></font>
<font color=3D"#000000"><span style=3D"background:transparent">Entry:</span=
></font>
<font color=3D"#000000"><span style=3D"background:transparent">QMAKE_LFLAGS=
 =3D -Wl,-rpath-link=3D/home/username/OSELAS.BSP-Pengutronix-Mini2440-2012.=
12.0/platform-mini2440/sysroot-target/usr/lib</span></font></pre>

Now, to get the debugger going.<br><br>@Everyone that helped me, thanks a l=
ot, I appreciate it. <br><br>Regards<br><br>Ruben<br><br><div class=3D"gmai=
l_quote">On Wed, Jan 9, 2013 at 11:03 AM, Tim Sander <span dir=3D"ltr">&lt;=
<a href=3D"mailto:tim.sander@hbm.com" target=3D"_blank">tim.sander@hbm.com<=
/a>&gt;</span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">Hi Ruben<br>
<div class=3D"im">&gt; Thanks for the advice. Can I still use the 2012.12.0=
 BSP with ptxdist<br>
&gt; 2012.09.1?<br>
</div><div class=3D"im">I think it should work, you have to do a &quot;ptxd=
ist migrate&quot; though.<br>
Tim<br>
<br>
</div>Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt=
, Germany | <a href=3D"http://www.hbm.com" target=3D"_blank">www.hbm.com</a=
><br>
<br>
Registered as GmbH (German limited liability corporation) in the commercial=
 register at the local court of Darmstadt, HRB 1147<br>
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the =
board: James Charles Webster<br>
<br>
Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister d=
es Amtsgerichts Darmstadt unter HRB 1147<br>
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst |=
 Aufsichtsratsvorsitzender: James Charles Webster<br>
<br>
The information in this email is confidential. It is intended solely for th=
e addressee. If you are not the intended recipient, please let me know and =
delete this email.<br>
<br>
Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich f=
ur den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger se=
in, informieren Sie mich bitte kurz und loeschen diese E-Mail.<br>
<div class=3D"HOEnZb"><div class=3D"h5"><br>
--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de">ptxdist@pengutronix.de</a><br>
</div></div></blockquote></div><br>

--14dae9d253b412a57304d2daa443--


--===============0724333669==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============0724333669==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from mail-oa0-f41.google.com ([209.85.219.41])
	by metis.ext.pengutronix.de with esmtp (Exim 4.72)
	(envelope-from <lfxciii@gmail.com>) id 1TsrXS-0008UK-BW
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:01:35 +0100
Received: by mail-oa0-f41.google.com with SMTP id k14so739750oag.14
	for <ptxdist@pengutronix.de>; Wed, 09 Jan 2013 01:01:28 -0800 (PST)
MIME-Version: 1.0
In-Reply-To: <1530397.faQrsKHOXN@dabox>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
Date: Wed, 9 Jan 2013 11:01:28 +0200
Message-ID: <CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
From: Ruben Louw <lfxciii@gmail.com>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: multipart/mixed; boundary="===============0658617167=="
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

--===============0658617167==
Content-Type: multipart/alternative; boundary=bcaec54ee6d4c7cd1004d2d74ef8

--bcaec54ee6d4c7cd1004d2d74ef8
Content-Type: text/plain; charset=ISO-8859-1

Hi Tim

Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
2012.09.1?

Regards


On Wed, Jan 9, 2013 at 10:57 AM, Tim Sander <tim@krieglstein.org> wrote:

> Hi Ruben
>
> I have just noticed that with the change to the wrapper based
> configuration the
> qmake based building has become much more inconvinent. I would recommend
> that you use a older (e.g.2012.09.1) ptxdist version where qmake
> configures the
> projects correctly out of the box. Then your problems with qtcreator should
> also go away.
>
> Best regards
> Tim
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>

--bcaec54ee6d4c7cd1004d2d74ef8
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hi Tim<br><br>Thanks for the advice. Can I still use the 2012.12.0 BSP with=
 ptxdist 2012.09.1?<br><br>Regards<br><br><br><div class=3D"gmail_quote">On=
 Wed, Jan 9, 2013 at 10:57 AM, Tim Sander <span dir=3D"ltr">&lt;<a href=3D"=
mailto:tim@krieglstein.org" target=3D"_blank">tim@krieglstein.org</a>&gt;</=
span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">Hi Ruben<br>
<br>
I have just noticed that with the change to the wrapper based configuration=
 the<br>
qmake based building has become much more inconvinent. I would recommend<br=
>
that you use a older (e.g.2012.09.1) ptxdist version where qmake configures=
 the<br>
projects correctly out of the box. Then your problems with qtcreator should=
<br>
also go away.<br>
<br>
Best regards<br>
<span class=3D"HOEnZb"><font color=3D"#888888">Tim<br>
<br>
--<br>
ptxdist mailing list<br>
<a href=3D"mailto:ptxdist@pengutronix.de">ptxdist@pengutronix.de</a><br>
</font></span></blockquote></div><br>

--bcaec54ee6d4c7cd1004d2d74ef8--


--===============0658617167==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-- 
ptxdist mailing list
ptxdist@pengutronix.de

--===============0658617167==--

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
Received: from relay.medianet-world.de ([213.157.0.172])
	by metis.ext.pengutronix.de with smtp (Exim 4.72)
	(envelope-from <Tim.Sander@hbm.com>) id 1TsrZU-0000Es-7O
	for ptxdist@pengutronix.de; Wed, 09 Jan 2013 10:03:41 +0100
Content-class: urn:content-classes:message
From: "Tim Sander" <tim.sander@hbm.com>
Date: Wed, 09 Jan 2013 10:03:33 +0100
Message-ID: <2038716.oDZmalDhO0@dabox>
In-Reply-To: <CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
	<1530397.faQrsKHOXN@dabox>
	<CAOP6b3ixHW4eXLdg0pz1yzDtA6YHWjiDb7n-FwCzVx+gU1ncWg@mail.gmail.com>
MIME-Version: 1.0
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de

Hi Ruben
> Thanks for the advice. Can I still use the 2012.12.0 BSP with ptxdist
> 2012.09.1?
I think it should work, you have to do a "ptxdist migrate" though.
Tim

Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt, Germany | www.hbm.com 

Registered as GmbH (German limited liability corporation) in the commercial register at the local court of Darmstadt, HRB 1147  
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the board: James Charles Webster

Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147 
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst | Aufsichtsratsvorsitzender: James Charles Webster

The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich fur den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.

-- 
ptxdist mailing list
ptxdist@pengutronix.de

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-path: <ptxdist-bounces@pengutronix.de>
From: Juergen Beisert <jbe@pengutronix.de>
Date: Wed, 9 Jan 2013 10:14:18 +0100
References: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
In-Reply-To: <CAOP6b3g0c=sRXjNtWXQ-Bsf9TB+FXCsfcNmf1J+01J2fX1MFjg@mail.gmail.com>
MIME-Version: 1.0
Content-Disposition: inline
Message-Id: <201301091014.19071.jbe@pengutronix.de>
Subject: Re: [ptxdist] tslib location compiled by PTxdist
Reply-To: ptxdist@pengutronix.de
List-Id: PTXdist Development Mailing List <ptxdist.pengutronix.de>
List-Unsubscribe: <http://metis.pengutronix.de/cgi-bin/mailman/options/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=unsubscribe>
List-Archive: <http://metis.pengutronix.de/pipermail/ptxdist>
List-Post: <mailto:ptxdist@pengutronix.de>
List-Help: <mailto:ptxdist-request@pengutronix.de?subject=help>
List-Subscribe: <http://metis.pengutronix.de/cgi-bin/mailman/listinfo/ptxdist>, 
	<mailto:ptxdist-request@pengutronix.de?subject=subscribe>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: ptxdist-bounces@pengutronix.de
Errors-To: ptxdist-bounces@pengutronix.de
To: ptxdist@pengutronix.de
Cc: Ruben Louw <lfxciii@gmail.com>

Hi Ruben,

Ruben Louw wrote:
> Does anyone know where ptxdist ompiles the tslib used for Qt on the target
> board?
>
> I'm having some trouble locating it.
>
> Any advice welcome.

Enabling the symbols "QT4" and "QT4_MOUSE_TSLIB" will force the build of
tslib.

I started with a clean BSP project and run "ptxdist targetinstall qt4". After
completion I get:

OSELAS.BSP-Pengutronix-Mini2440 $ ls platform-mini2440/sysroot-target/usr/lib/libts*
platform-mini2440/sysroot-target/usr/lib/libts-0.0.so.0      platform-mini2440/sysroot-target/usr/lib/libts.la
platform-mini2440/sysroot-target/usr/lib/libts-0.0.so.0.1.1  platform-mini2440/sysroot-target/usr/lib/libts.so

Regards,
Juergen

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |

-- 
ptxdist mailing list
ptxdist@pengutronix.de