Re: [ptxdist] [APPLIED] rules: host-erofs-utils: package

[Michael Olbrich <m.olbrich@pengutronix.de>]

Thanks, applied as b232d3bebd8107be22df88a0aee79e128aa8e39c.

Michael

[sent from post-receive hook]

On Wed, 14 May 2025 08:07:36 +0200, Leonard Göhrs <l.goehrs@pengutronix.de> wrote:
> Erofs is a read only filesystem, much like squashfs, that is optimized
> for read performance (rather than e.g. maximum compression ratio).
> 
> The erofs-utils host package allows building erofs images.
> Since genimage does not have erofs support yet (there is a pull request
> though [1]) this can for example be achieved via the tar input feature:
> 
>     $ mkfs.erofs -z zstd --ungzip --tar root.erofs root.tgz
> 
> and a custom rule.
> 
> [1]: https://github.com/pengutronix/genimage/pull/247
> 
> Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
> Message-Id: <20250428055735.1705564-1-l.goehrs@pengutronix.de>
> [mol: pin down configure options]
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
> 
> diff --git a/patches/erofs-utils-1.8.5/autogen.sh b/patches/erofs-utils-1.8.5/autogen.sh
> new file mode 120000
> index 000000000000..9f8a4cb7ddcb
> --- /dev/null
> +++ b/patches/erofs-utils-1.8.5/autogen.sh
> @@ -0,0 +1 @@
> +../autogen.sh
> \ No newline at end of file
> diff --git a/rules/host-erofs-utils.in b/rules/host-erofs-utils.in
> new file mode 100644
> index 000000000000..80dec1b80dc5
> --- /dev/null
> +++ b/rules/host-erofs-utils.in
> @@ -0,0 +1,19 @@
> +## SECTION=hosttools_noprompt
> +
> +config HOST_EROFS_UTILS
> +	tristate
> +	default y if ALLYES
> +	select HOST_LIBUUID
> +	select HOST_ZLIB
> +	select HOST_LZ4 if HOST_EROFS_UTILS_LZ4_SUPPORT
> +	select HOST_ZSTD if HOST_EROFS_UTILS_ZSTD_SUPPORT
> +
> +if HOST_EROFS_UTILS
> +
> +config HOST_EROFS_UTILS_LZ4_SUPPORT
> +	bool
> +
> +config HOST_EROFS_UTILS_ZSTD_SUPPORT
> +	bool
> +
> +endif
> diff --git a/rules/host-erofs-utils.make b/rules/host-erofs-utils.make
> new file mode 100644
> index 000000000000..b4f8184f859d
> --- /dev/null
> +++ b/rules/host-erofs-utils.make
> @@ -0,0 +1,55 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2025 by Leonard Göhrs <l.goehrs@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_EROFS_UTILS) += host-erofs-utils
> +
> +#
> +# Paths and names
> +#
> +HOST_EROFS_UTILS_VERSION	:= 1.8.5
> +HOST_EROFS_UTILS_MD5		:= a4a4d803bc5120ffacc05a453a505ff7
> +HOST_EROFS_UTILS		:= erofs-utils-$(HOST_EROFS_UTILS_VERSION)
> +HOST_EROFS_UTILS_SUFFIX		:= tar.gz
> +HOST_EROFS_UTILS_URL		:= https://web.git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/snapshot/$(HOST_EROFS_UTILS).$(HOST_EROFS_UTILS_SUFFIX)
> +HOST_EROFS_UTILS_SOURCE		:= $(SRCDIR)/$(HOST_EROFS_UTILS).$(HOST_EROFS_UTILS_SUFFIX)
> +HOST_EROFS_UTILS_DIR		:= $(HOST_BUILDDIR)/$(HOST_EROFS_UTILS)
> +HOST_EROFS_UTILS_LICENSE	:= GPL-2.0-or-later
> +HOST_EROFS_UTILS_LICENSE_FILES	:= \
> +	file://COPYING;md5=73001d804ea1e3d84365f652242cca20 \
> +	file://LICENSES/GPL-2.0;md5=94fa01670a2a8f2d3ab2de15004e0848
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#
> +# autoconf
> +#
> +HOST_EROFS_UTILS_CONF_TOOL	:= autoconf
> +HOST_EROFS_UTILS_CONF_OPT	:= \
> +	$(HOST_AUTOCONF) \
> +	--disable-multithreading \
> +	--disable-debug \
> +	--disable-werror \
> +	--disable-fuzzing \
> +	--$(call ptx/endis, PTXCONF_HOST_EROFS_UTILS_LZ4_SUPPORT)-lz4 \
> +	--disable-lzma \
> +	--disable-fuse \
> +	--disable-static-fuse \
> +	--without-zlib \
> +	--without-libdeflate \
> +	--$(call ptx/wwo, PTXCONF_HOST_EROFS_UTILS_ZSTD_SUPPORT)-libzstd \
> +	--without-qpl \
> +	--without-xxhash \
> +	--with-uuid \
> +	--without-selinux
> +
> +# vim: syntax=make