From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Christian Melki <christian.melki@t2data.com>
Subject: Re: [ptxdist] [APPLIED] openssl: Version bump. 3.4.1 -> 3.5.0
Date: Fri, 9 May 2025 09:25:03 +0200 [thread overview]
Message-ID: <20250509072503.2679058-1-m.olbrich@pengutronix.de> (raw)
In-Reply-To: <20250410171824.2862000-1-christian.melki@t2data.com>
Thanks, applied as c3322b2f43608c6caed59c596104b6b216cc4431.
Michael
[sent from post-receive hook]
On Fri, 09 May 2025 09:25:03 +0200, Christian Melki <christian.melki@t2data.com> wrote:
> https://github.com/openssl/openssl/releases/tag/openssl-3.5.0
>
> * Forward patches with line adjustments.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20250410171824.2862000-1-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/patches/openssl-3.4.1/0001-debian-targets.patch b/patches/openssl-3.5.0/0001-debian-targets.patch
> similarity index 100%
> rename from patches/openssl-3.4.1/0001-debian-targets.patch
> rename to patches/openssl-3.5.0/0001-debian-targets.patch
> diff --git a/patches/openssl-3.4.1/0002-pic.patch b/patches/openssl-3.5.0/0002-pic.patch
> similarity index 94%
> rename from patches/openssl-3.4.1/0002-pic.patch
> rename to patches/openssl-3.5.0/0002-pic.patch
> index 840819211df4..0978e8fcec78 100644
> --- a/patches/openssl-3.4.1/0002-pic.patch
> +++ b/patches/openssl-3.5.0/0002-pic.patch
> @@ -110,10 +110,10 @@ index ef09e0fd297a..fe6ff45d1804 100644
> &mov("eax", &DWP($data_off,"esp","",0)); # get return
> &mov("ebx", &DWP($data_off+4,"esp","",0)); #
> diff --git a/crypto/perlasm/x86gas.pl b/crypto/perlasm/x86gas.pl
> -index 1b2b27c02286..a62c01b175a2 100644
> +index f3c01ea89b4b..2fba3d831c74 100644
> --- a/crypto/perlasm/x86gas.pl
> +++ b/crypto/perlasm/x86gas.pl
> -@@ -171,6 +171,7 @@ sub ::file_end
> +@@ -172,6 +172,7 @@ sub ::file_end
> if ($::macosx) { push (@out,"$tmp,2\n"); }
> elsif ($::elf) { push (@out,"$tmp,4\n"); }
> else { push (@out,"$tmp\n"); }
> @@ -121,7 +121,7 @@ index 1b2b27c02286..a62c01b175a2 100644
> }
> push(@out,$initseg) if ($initseg);
> if ($::elf) {
> -@@ -249,8 +250,23 @@ ___
> +@@ -250,8 +251,23 @@ ___
> elsif ($::elf)
> { $initseg.=<<___;
> .section .init
> @@ -146,7 +146,7 @@ index 1b2b27c02286..a62c01b175a2 100644
> elsif ($::coff)
> { $initseg.=<<___; # applies to both Cygwin and Mingw
> diff --git a/crypto/x86cpuid.pl b/crypto/x86cpuid.pl
> -index a7bcb27e262d..6688a1fc4464 100644
> +index 35e2c5b0a540..282058ce87f3 100644
> --- a/crypto/x86cpuid.pl
> +++ b/crypto/x86cpuid.pl
> @@ -16,6 +16,8 @@ $output = pop and open STDOUT,">$output";
> @@ -158,7 +158,7 @@ index a7bcb27e262d..6688a1fc4464 100644
> &function_begin("OPENSSL_ia32_cpuid");
> &xor ("edx","edx");
> &pushf ();
> -@@ -161,9 +163,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> +@@ -185,9 +187,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> &set_label("nocpuid");
> &function_end("OPENSSL_ia32_cpuid");
>
> @@ -169,7 +169,7 @@ index a7bcb27e262d..6688a1fc4464 100644
> &xor ("eax","eax");
> &xor ("edx","edx");
> &picmeup("ecx","OPENSSL_ia32cap_P");
> -@@ -177,7 +177,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> +@@ -201,7 +201,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> # This works in Ring 0 only [read DJGPP+MS-DOS+privileged DPMI host],
> # but it's safe to call it on any [supported] 32-bit platform...
> # Just check for [non-]zero return value...
> @@ -178,7 +178,7 @@ index a7bcb27e262d..6688a1fc4464 100644
> &picmeup("ecx","OPENSSL_ia32cap_P");
> &bt (&DWP(0,"ecx"),4);
> &jnc (&label("nohalt")); # no TSC
> -@@ -244,7 +244,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> +@@ -268,7 +268,7 @@ for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
> &ret ();
> &function_end_B("OPENSSL_far_spin");
>
> diff --git a/patches/openssl-3.4.1/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch b/patches/openssl-3.5.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> similarity index 95%
> rename from patches/openssl-3.4.1/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> rename to patches/openssl-3.5.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> index 0a90f252aa61..9f941b880776 100644
> --- a/patches/openssl-3.4.1/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> +++ b/patches/openssl-3.5.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> @@ -41,10 +41,10 @@ index cba57b41273f..7fa3eeae412f 100644
> "linux-latomic" => {
> inherit_from => [ "linux-generic32" ],
> diff --git a/Configure b/Configure
> -index fff97bd6fc82..2f6f7271f94e 100755
> +index 15054f94034a..fcb1d4cfefb4 100755
> --- a/Configure
> +++ b/Configure
> -@@ -1813,7 +1813,7 @@ unless ($disabled{devcryptoeng}) {
> +@@ -1835,7 +1835,7 @@ unless ($disabled{devcryptoeng}) {
> unless ($disabled{ktls}) {
> $config{ktls}="";
> my $cc = $config{CROSS_COMPILE}.$config{CC};
> diff --git a/patches/openssl-3.4.1/0004-conf-Serialize-allocation-free-of-ssl_names.patch b/patches/openssl-3.5.0/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> similarity index 100%
> rename from patches/openssl-3.4.1/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> rename to patches/openssl-3.5.0/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> diff --git a/patches/openssl-3.4.1/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch b/patches/openssl-3.5.0/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> similarity index 100%
> rename from patches/openssl-3.4.1/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> rename to patches/openssl-3.5.0/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> diff --git a/patches/openssl-3.4.1/series b/patches/openssl-3.5.0/series
> similarity index 100%
> rename from patches/openssl-3.4.1/series
> rename to patches/openssl-3.5.0/series
> diff --git a/rules/openssl.make b/rules/openssl.make
> index 7ff3f808620e..f2e985b58d28 100644
> --- a/rules/openssl.make
> +++ b/rules/openssl.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_OPENSSL) += openssl
> #
> # Paths and names
> #
> -OPENSSL_VERSION := 3.4.1
> -OPENSSL_MD5 := fb7a747ac6793a7ad7118eaba45db379
> +OPENSSL_VERSION := 3.5.0
> +OPENSSL_MD5 := 51da7d2bdf7f4f508cb024f562eb9b03
> OPENSSL := openssl-$(OPENSSL_VERSION)
> OPENSSL_SUFFIX := tar.gz
> OPENSSL_URL := \
prev parent reply other threads:[~2025-05-09 7:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-10 17:18 [ptxdist] [PATCH] " Christian Melki
2025-05-09 7:25 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509072503.2679058-1-m.olbrich@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox