From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Christian Melki <christian.melki@t2data.com>
Subject: Re: [ptxdist] [APPLIED] openssl: Version bump. 3.0.8 -> 3.1.0
Date: Fri, 24 Mar 2023 10:03:39 +0100 [thread overview]
Message-ID: <20230324090339.305692-1-m.olbrich@pengutronix.de> (raw)
In-Reply-To: <20230320195308.3066498-1-christian.melki@t2data.com>
Thanks, applied as 06372c8c4467c201c939b8891c2923e50dc783f6.
Michael
[sent from post-receive hook]
On Fri, 24 Mar 2023 10:03:39 +0100, Christian Melki <christian.melki@t2data.com> wrote:
> Another bunch of deprecation for protocols and obsoleted functions.
> But it shouldn't be a big deal between 3.0 and 3.1
> Some assembler optimizations, mostly x86 afaiu.
>
> * Forward patchset. Applies cleanly.
>
> Signed-off-by: Christian Melki <christian.melki@t2data.com>
> Message-Id: <20230320195308.3066498-1-christian.melki@t2data.com>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/patches/openssl-3.0.8/0001-debian-targets.patch b/patches/openssl-3.1.0/0001-debian-targets.patch
> similarity index 100%
> rename from patches/openssl-3.0.8/0001-debian-targets.patch
> rename to patches/openssl-3.1.0/0001-debian-targets.patch
> diff --git a/patches/openssl-3.0.8/0002-pic.patch b/patches/openssl-3.1.0/0002-pic.patch
> similarity index 100%
> rename from patches/openssl-3.0.8/0002-pic.patch
> rename to patches/openssl-3.1.0/0002-pic.patch
> diff --git a/patches/openssl-3.0.8/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch b/patches/openssl-3.1.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> similarity index 93%
> rename from patches/openssl-3.0.8/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> rename to patches/openssl-3.1.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> index d94727a1083c..5d0181e23857 100644
> --- a/patches/openssl-3.0.8/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> +++ b/patches/openssl-3.1.0/0003-Configure-allow-to-enable-ktls-if-target-does-not-st.patch
> @@ -28,7 +28,7 @@ Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Configurations/10-main.conf b/Configurations/10-main.conf
> -index b578a3c2a861..b3b21d39990b 100644
> +index 8f8ac322887f..4ee919347f43 100644
> --- a/Configurations/10-main.conf
> +++ b/Configurations/10-main.conf
> @@ -697,7 +697,7 @@ my %targets = (
> @@ -41,10 +41,10 @@ index b578a3c2a861..b3b21d39990b 100644
> "linux-latomic" => {
> inherit_from => [ "linux-generic32" ],
> diff --git a/Configure b/Configure
> -index 5ac4b5222e4f..978414d914ea 100755
> +index ab57c20737a5..9409137c92df 100755
> --- a/Configure
> +++ b/Configure
> -@@ -1715,7 +1715,7 @@ unless ($disabled{devcryptoeng}) {
> +@@ -1702,7 +1702,7 @@ unless ($disabled{devcryptoeng}) {
> unless ($disabled{ktls}) {
> $config{ktls}="";
> my $cc = $config{CROSS_COMPILE}.$config{CC};
> diff --git a/patches/openssl-3.0.8/0004-conf-Serialize-allocation-free-of-ssl_names.patch b/patches/openssl-3.1.0/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> similarity index 100%
> rename from patches/openssl-3.0.8/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> rename to patches/openssl-3.1.0/0004-conf-Serialize-allocation-free-of-ssl_names.patch
> diff --git a/patches/openssl-3.0.8/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch b/patches/openssl-3.1.0/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> similarity index 100%
> rename from patches/openssl-3.0.8/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> rename to patches/openssl-3.1.0/0005-Configure-drop-fzero-call-used-regs-used-gpr-from-De.patch
> diff --git a/patches/openssl-3.0.8/series b/patches/openssl-3.1.0/series
> similarity index 100%
> rename from patches/openssl-3.0.8/series
> rename to patches/openssl-3.1.0/series
> diff --git a/rules/openssl.make b/rules/openssl.make
> index de52246e648e..f4fb408d1abe 100644
> --- a/rules/openssl.make
> +++ b/rules/openssl.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_OPENSSL) += openssl
> #
> # Paths and names
> #
> -OPENSSL_VERSION := 3.0.8
> -OPENSSL_MD5 := 61e017cf4fea1b599048f621f1490fbd
> +OPENSSL_VERSION := 3.1.0
> +OPENSSL_MD5 := f6c520aa2206d4d1fa71ea30b5e9a56d
> OPENSSL := openssl-$(OPENSSL_VERSION)
> OPENSSL_SUFFIX := tar.gz
> OPENSSL_URL := \
prev parent reply other threads:[~2023-03-24 9:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 19:53 [ptxdist] [PATCH] " Christian Melki
2023-03-24 9:03 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230324090339.305692-1-m.olbrich@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox