From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: David Jander <david@protonic.nl>
Subject: Re: [ptxdist] [APPLIED] python3-uvloop: new package
Date: Mon, 9 May 2022 08:29:21 +0200 [thread overview]
Message-ID: <20220509062921.3769177-1-m.olbrich@pengutronix.de> (raw)
In-Reply-To: <20220506111256.1533831-3-david@protonic.nl>
Thanks, applied as 668456fe16194666b316629c0ff36e269c981e51.
Michael
[sent from post-receive hook]
On Mon, 09 May 2022 08:29:21 +0200, David Jander <david@protonic.nl> wrote:
> This is an ultra-fast replacement for the python3 asyncio event loop.
>
> Signed-off-by: David Jander <david@protonic.nl>
> Message-Id: <20220506111256.1533831-3-david@protonic.nl>
> Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
>
> diff --git a/rules/python3-uvloop.in b/rules/python3-uvloop.in
> new file mode 100644
> index 000000000000..6f937a31bc92
> --- /dev/null
> +++ b/rules/python3-uvloop.in
> @@ -0,0 +1,10 @@
> +## SECTION=python3
> +
> +config PYTHON3_UVLOOP
> + tristate
> + select PYTHON3
> + select HOST_CYTHON3
> + select LIBUV
> + prompt "python3-uvloop"
> + help
> + Ultra fast asyncio event loop
> diff --git a/rules/python3-uvloop.make b/rules/python3-uvloop.make
> new file mode 100644
> index 000000000000..f63a9e28c8f0
> --- /dev/null
> +++ b/rules/python3-uvloop.make
> @@ -0,0 +1,57 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2019 by David Jander <david@protonic.nl>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_PYTHON3_UVLOOP) += python3-uvloop
> +
> +#
> +# Paths and names
> +#
> +PYTHON3_UVLOOP_VERSION := v0.16.0
> +PYTHON3_UVLOOP_MD5 := d70d003f73f034e4fecdda2078fed6f3
> +PYTHON3_UVLOOP := python3-uvloop-$(PYTHON3_UVLOOP_VERSION)
> +PYTHON3_UVLOOP_SUFFIX := tar.gz
> +PYTHON3_UVLOOP_URL := https://github.com/MagicStack/uvloop/archive/$(PYTHON3_UVLOOP_VERSION).$(PYTHON3_UVLOOP_SUFFIX)
> +PYTHON3_UVLOOP_SOURCE := $(SRCDIR)/$(PYTHON3_UVLOOP).$(PYTHON3_UVLOOP_SUFFIX)
> +PYTHON3_UVLOOP_DIR := $(BUILDDIR)/$(PYTHON3_UVLOOP)
> +PYTHON3_UVLOOP_LICENSE := Apache-2.0 OR MIT
> +PYTHON3_UVLOOP_LICENSE_FILES := \
> + file://LICENSE-APACHE;md5=57700cee6d14d45039259183f3c50ef1 \
> + file://LICENSE-MIT;md5=3bd0b2e751776b370b2151ac508af939
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +PYTHON3_UVLOOP_CONF_TOOL := python3
> +PYTHON3_UVLOOP_MAKE_OPT := build build_py build_ext --use-system-libuv
> +PYTHON3_UVLOOP_INSTALL_OPT := build_ext --use-system-libuv install --prefix=/usr
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/python3-uvloop.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, python3-uvloop)
> + @$(call install_fixup, python3-uvloop, PRIORITY, optional)
> + @$(call install_fixup, python3-uvloop, SECTION, base)
> + @$(call install_fixup, python3-uvloop, AUTHOR, "David Jander <david@protonic.nl>")
> + @$(call install_fixup, python3-uvloop, DESCRIPTION, missing)
> +
> + @$(call install_glob, python3-uvloop, 0, 0, -, \
> + /usr/lib/python$(PYTHON3_MAJORMINOR)/site-packages/uvloop, *.pyc *.so)
> +
> + @$(call install_finish, python3-uvloop)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
prev parent reply other threads:[~2022-05-09 6:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-06 11:12 [ptxdist] [PATCH V3 0/2] Add python3-uvloop David Jander
2022-05-06 11:12 ` [ptxdist] [PATCH V3 1/2] libuv version bump 1.34.0 -> 1.42.0 David Jander
2022-05-06 11:12 ` [ptxdist] [PATCH V3 2/2] python3-uvloop: new package David Jander
2022-05-09 6:29 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220509062921.3769177-1-m.olbrich@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=david@protonic.nl \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox