From: Michael Riesch <michael.riesch@wolfvision.net>
To: ptxdist@pengutronix.de
Cc: m.tretter@pengutronix.de, Michael Riesch <michael.riesch@wolfvision.net>
Subject: [ptxdist] [RFC PATCH v6 5/5] barebox.rockchip: add binary firmware blobs for quartz64 and rk3568-evb1
Date: Sat, 29 Jan 2022 08:03:30 +0100 [thread overview]
Message-ID: <20220129070330.2601433-6-michael.riesch@wolfvision.net> (raw)
In-Reply-To: <20220129070330.2601433-1-michael.riesch@wolfvision.net>
Currently, the mainline OP-TEE and TF-A sources do not support the
RK356x SoCs. Therefore, the only option is to use the binary blobs
provided by Rockchip. This patch integrates these blobs (along the SDRAM
initialization binary) for the Pine64 Quartz64 board and the RK3568
EVB1 into barebox.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
Notes:
v6:
- fixed dependencies and switched to using the new BAREBOX_DEPENDENCIES
symbol
platforms/barebox.rockchip.in | 16 ++++++++++++++++
rules/barebox.rockchip.make | 18 ++++++++++++++++++
2 files changed, 34 insertions(+)
create mode 100644 platforms/barebox.rockchip.in
create mode 100644 rules/barebox.rockchip.make
diff --git a/platforms/barebox.rockchip.in b/platforms/barebox.rockchip.in
new file mode 100644
index 000000000..f926585b2
--- /dev/null
+++ b/platforms/barebox.rockchip.in
@@ -0,0 +1,16 @@
+## SECTION=barebox_firmware
+
+config BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+ prompt "barebox needs firmware-rockchip"
+ bool
+ depends on ARCH_ARM64
+ help
+ Select this if barebox needs the non-free Rockchip firmware
+ blobs.
+
+config BAREBOX_DEPENDENCIES
+ select FIRMWARE_ROCKCHIP if BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+ select FIRMWARE_ROCKCHIP_RK356x_BL31 if BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+ select FIRMWARE_ROCKCHIP_RK356x_BL32 if BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+ select FIRMWARE_ROCKCHIP_RK3566_SDRAM if BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+ select FIRMWARE_ROCKCHIP_RK3568_SDRAM if BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
diff --git a/rules/barebox.rockchip.make b/rules/barebox.rockchip.make
new file mode 100644
index 000000000..0255b2b4d
--- /dev/null
+++ b/rules/barebox.rockchip.make
@@ -0,0 +1,18 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Michael Riesch <michael.riesch@wolfvision.net>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+ifdef PTXCONF_BAREBOX_NEEDS_FIRMWARE_ROCKCHIP
+
+BAREBOX_INJECT_FILES += rk3568_bl31_v1.24.elf:firmware/rk3568-bl31.bin
+BAREBOX_INJECT_FILES += rk3568_bl32_v1.05.bin:firmware/rk3568-op-tee.bin
+
+BAREBOX_INJECT_FILES += rk3566_ddr_1056MHz_v1.08.bin:arch/arm/boards/pine64-quartz64/sdram-init.bin
+
+BAREBOX_INJECT_FILES += rk3568_ddr_1560MHz_v1.08.bin:arch/arm/boards/rockchip-rk3568-evb/sdram-init.bin
+
+endif
--
2.30.2
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
prev parent reply other threads:[~2022-01-29 7:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-29 7:03 [ptxdist] [PATCH v6 0/5] Add support for Rockchip firmware blobs Michael Riesch
2022-01-29 7:03 ` [ptxdist] [PATCH v6 1/5] platforms: add section for non-free " Michael Riesch
2022-01-30 15:49 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-29 7:03 ` [ptxdist] [PATCH v6 2/5] add package for rockchip firmware binaries Michael Riesch
2022-01-29 7:03 ` [ptxdist] [PATCH v6 3/5] scripts: add helper to inject files into a source directory Michael Riesch
2022-01-30 15:49 ` [ptxdist] [APPLIED] " Michael Olbrich
2024-04-19 9:48 ` [ptxdist] [PATCH v6 3/5] " Alexander Dahl
2024-05-02 10:08 ` Michael Olbrich
2024-04-23 13:52 ` Alexander Dahl
2024-04-23 16:27 ` Michael Riesch
2022-01-29 7:03 ` [ptxdist] [PATCH v6 4/5] barebox: add integration of firmware blobs Michael Riesch
2022-01-30 15:49 ` [ptxdist] [APPLIED] " Michael Olbrich
2022-01-29 7:03 ` Michael Riesch [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220129070330.2601433-6-michael.riesch@wolfvision.net \
--to=michael.riesch@wolfvision.net \
--cc=m.tretter@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox