mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Gavin Schenk <g.schenk@eckelmann.de>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v2] timezone: Support for zonetab1970
Date: Wed, 8 Dec 2021 08:40:20 +0100	[thread overview]
Message-ID: <20211208074020.GD15196@pengutronix.de> (raw)
In-Reply-To: <20211203152337.82758-1-g.schenk@eckelmann.de>

On Fri, Dec 03, 2021 at 04:23:37PM +0100, Gavin Schenk wrote:
> zonetab1970 contains a table where each row stands for a timezone where
> civil timestamps have agreed since 1970.
> 
> zonetab1970 is used by systemd in the timedatectl list-timezones
> command that was broken without this data.
> 
> zonetab1970 is intended to be delivered with the complete data set from
> tzdata package. Since PTXDIST offers the option to deliver timezones
> only partially, the solution is to correct the file during installation.
> Deselected timezone entries are removed from the file during INSTALL
> step.
> 
> Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
> ---
> Changes since v1:
>  - Drop menuentry TIMEZONE_ZONETAB_1970 and install file always
>  - Use suggested algorithm that is more compact and forks less processes
>    ( Commented lines are not removed any more )
> 
> One idea for removing the commented lines is:
> @grep "\($$(find TIMEZONE_PKGDIR)/usr/share/zoneinfo -type f -printf '%P\|')34987qiruhqwerkjb43kn5b3j4klrhqwekljrh\)"
> 
> Maybe not important, if looking on the file size. With Zone Europe enabled
> zone1970.tab contains 3557 bytes. With all zones enabled it increases to
> 17593 bytes. 
> 
> I tested this with all timezones enabled and the long expression
> does not exceed limits of shell.
> 
> ---
>  rules/host-tz-database.make | 2 +-
>  rules/timezone.make         | 7 ++++++-
>  2 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/rules/host-tz-database.make b/rules/host-tz-database.make
> index fe4d36467..006060496 100644
> --- a/rules/host-tz-database.make
> +++ b/rules/host-tz-database.make
> @@ -67,6 +67,6 @@ HOST_TZ_DATABASE_CONF_TOOL	:= NO
>  HOST_TZ_DATABASE_MAKE_OPT	:= \
>  	zic TZDIR=/usr/share/zoneinfo CFLAGS=-DSTD_INSPIRED
>  HOST_TZ_DATABASE_INSTALL_OPT	:= \
> -	posix_only TZDIR=/usr/share/zoneinfo
> +	REDO=posix_only TZDIR=/usr/share/zoneinfo install
>  
>  # vim: syntax=make
> diff --git a/rules/timezone.make b/rules/timezone.make
> index c1fd3fbc3..68ec669c0 100644
> --- a/rules/timezone.make
> +++ b/rules/timezone.make
> @@ -87,7 +87,10 @@ $(STATEDIR)/timezone.install:
>  	@for target in $(TIMEZONE-y); do \
>  		$(call add_zoneinfo, $$target, $(TIMEZONE_PKGDIR)/usr/share, $(PTXDIST_SYSROOT_HOST)/usr); \
>  	done
> -	@$(call touch)

This should not be removed.

Michael

> +# Fix entries in zonetab to match the selected PTXCONF_TIMEZONE_* options.
> +	@grep "\($$(find $(TIMEZONE_PKGDIR)/usr/share/zoneinfo -type f -printf '%P\|')#\)" \
> +		$(PTXDIST_SYSROOT_HOST)/usr/share/zoneinfo/zone1970.tab > \
> +		$(TIMEZONE_PKGDIR)/usr/share/zoneinfo/zone1970.tab
>  
>  # ----------------------------------------------------------------------------
>  # Target-Install
> @@ -116,6 +119,8 @@ ifneq ($(call remove_quotes,$(PTXCONF_TIMEZONE_LOCALTIME)),)
>  		/etc/localtime)
>  endif
>  
> +	$(call install_copy, timezone, 0, 0, 0644, -, /usr/share/zoneinfo/zone1970.tab)

Don't for get the '@' at the beginning of the line.

Michael

> +
>  	@$(call install_finish, timezone)
>  
>  	@$(call touch)
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de


  reply	other threads:[~2021-12-08  7:40 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-01 11:38 [ptxdist] [PATCH 0/2] Using systemd/timedatectl to handle timedate Gavin Schenk
2021-11-01 11:38 ` [ptxdist] [PATCH 1/2] host-tz-database: Version bump 2020d -> 2021e Gavin Schenk
2021-11-01 12:46   ` Alexander Dahl
2021-12-17 14:59     ` Alexander Dahl
2021-12-18  7:35       ` [ptxdist] [PATCH v2 " Gavin Schenk
2021-12-18  7:42   ` [ptxdist] [APPLIED] " Michael Olbrich
2021-11-01 11:38 ` [ptxdist] [PATCH 2/2] timezone: Support for zonetab1970 Gavin Schenk
2021-11-02  5:56   ` Denis Osterland-Heim
2021-11-02  8:34     ` Gavin Schenk
2021-11-22 11:32       ` Gavin Schenk
2021-11-25 15:52   ` Michael Olbrich
2021-12-03 15:23     ` [ptxdist] [PATCH v2] " Gavin Schenk
2021-12-08  7:40       ` Michael Olbrich [this message]
2021-12-15 13:50         ` [ptxdist] [PATCH v3] " Gavin Schenk
2021-12-17 13:27           ` [ptxdist] [APPLIED] " Michael Olbrich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211208074020.GD15196@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=g.schenk@eckelmann.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox