From: Christian Melki <christian.melki@t2data.com>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] sysklogd: Add new package.
Date: Mon, 11 Oct 2021 16:49:54 +0200 [thread overview]
Message-ID: <20211011144954.825006-1-christian.melki@t2data.com> (raw)
Add a forked version of the old sysklogd.
This version has seen some major cleanup, with RFC3164 and RFC5424 support.
Notable is the addition of remote syslog messages and syslogp() support.
Signed-off-by: Christian Melki <christian.melki@t2data.com>
---
rules/sysklogd-bbinit.in | 8 ++++
rules/sysklogd.in | 44 ++++++++++++++++++++
rules/sysklogd.make | 89 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 141 insertions(+)
create mode 100644 rules/sysklogd-bbinit.in
create mode 100644 rules/sysklogd.in
create mode 100644 rules/sysklogd.make
diff --git a/rules/sysklogd-bbinit.in b/rules/sysklogd-bbinit.in
new file mode 100644
index 000000000..ea8f80832
--- /dev/null
+++ b/rules/sysklogd-bbinit.in
@@ -0,0 +1,8 @@
+## SECTION=initmethod_bbinit
+
+config SYSKLOGD_BBINIT_LINK
+ string
+ depends on SYSKLOGD_STARTSCRIPT
+ prompt "syslogd"
+ default "S10syslogd"
+
diff --git a/rules/sysklogd.in b/rules/sysklogd.in
new file mode 100644
index 000000000..1189ace95
--- /dev/null
+++ b/rules/sysklogd.in
@@ -0,0 +1,44 @@
+## SECTION=networking
+
+menuconfig SYSKLOGD
+ tristate
+ prompt "sysklogd "
+ select SYSTEMD if SYSKLOGD_SYSTEMD
+ help
+ The venerable BSD syslogd and klogd rolled into one syslogd.
+ This is a maintained and updated variant of the same.
+
+if SYSKLOGD
+
+comment "runtime options ---"
+
+config SYSKLOGD_CONFIG
+ bool
+ default y
+ prompt "Install configuration file"
+ help
+ Installs (if present) the "./projectroot/etc/syslogd.conf"
+ file from your workspace, otherwise a generic one from the
+ ptxdist installation
+ ("<PTXDIST>/projectroot/etc/syslogd.conf").
+
+config SYSKLOGD_SYSTEMD
+ bool
+ default y
+ prompt "Enable systemd support"
+ depends on INITMETHOD_SYSTEMD
+ help
+ Installs the systemd service file and enables support for the
+ systemd-journal
+
+config SYSKLOGD_STARTSCRIPT
+ bool
+ default y
+ depends on INITMETHOD_BBINIT
+ help
+ Installs (if present) the
+ "./projectroot/etc/init.d/syslogd" startscript from your
+ workspace, otherwise a generic one from the ptxdist
+ installation ("<PTXDIST>/projectroot/etc/init.d/syslogd").
+
+endif
diff --git a/rules/sysklogd.make b/rules/sysklogd.make
new file mode 100644
index 000000000..217b1642a
--- /dev/null
+++ b/rules/sysklogd.make
@@ -0,0 +1,89 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Christian Melki <christian.melki@t2data.com>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_SYSKLOGD) += sysklogd
+
+#
+# Paths and names
+#
+SYSKLOGD_VERSION := 2.2.3
+SYSKLOGD_MD5 := 2c6749c49f52b8c5dad18e9a9315e7dd
+SYSKLOGD := sysklogd-$(SYSKLOGD_VERSION)
+SYSKLOGD_SUFFIX := tar.gz
+SYSKLOGD_URL := https://github.com/troglobit/sysklogd/releases/download/v$(SYSKLOGD_VERSION)/$(SYSKLOGD).$(SYSKLOGD_SUFFIX)
+SYSKLOGD_SOURCE := $(SRCDIR)/$(SYSKLOGD).$(SYSKLOGD_SUFFIX)
+SYSKLOGD_DIR := $(BUILDDIR)/$(SYSKLOGD)
+SYSKLOGD_LICENSE := BSD-3-Clause
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#
+# autoconf
+#
+SYSKLOGD_AUTOCONF = \
+ $(CROSS_AUTOCONF_USR)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/sysklogd.install:
+ @$(call targetinfo)
+ @$(call world/install, SYSKLOGD)
+ @$(call touch)
+
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/sysklogd.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, sysklogd)
+ @$(call install_fixup, sysklogd,PRIORITY,optional)
+ @$(call install_fixup, sysklogd,SECTION,base)
+ @$(call install_fixup, sysklogd,AUTHOR,"Christian Melki <christian.melki@t2data.com>")
+ @$(call install_fixup, sysklogd,DESCRIPTION,missing)
+ @$(call install_copy, sysklogd, 0, 0, 0755, -, /usr/bin/logger)
+ @$(call install_copy, sysklogd, 0, 0, 0755, -, /usr/sbin/syslogd)
+ @$(call install_lib, sysklogd, 0, 0, 0644, libsyslog)
+ifdef PTXCONF_SYSKLOGD_CONFIG
+ @$(call install_alternative, sysklogd, 0, 0, 0644, /etc/syslog.conf, n)
+endif
+
+ifdef PTXCONF_SYSKLOGD_STARTSCRIPT
+ @$(call install_alternative, sysklogd, 0, 0, 0755, /etc/init.d/syslogd, n)
+
+ifneq ($(call remove_quotes,$(PTXCONF_SYSKLOGD_BBINIT_LINK)),)
+ @$(call install_link, sysklogd, \
+ ../init.d/syslogd, \
+ /etc/rc.d/$(PTXCONF_SYSKLOGD_BBINIT_LINK))
+endif
+endif
+
+ifdef PTXCONF_INITMETHOD_SYSTEMD
+ifdef PTXCONF_SYSKLOGD_SYSTEMD
+ @$(call install_alternative, sysklogd, 0, 0, 0644, \
+ /usr/lib/systemd/system/sysklogd.service)
+ @$(call install_link, sysklogd, ../syslogd.service, \
+ /usr/lib/systemd/system/multi-user.target.wants/syslogd.service)
+ @$(call install_link, sysklogd, syslogd.service, \
+ /usr/lib/systemd/system/syslog.service)
+endif
+endif
+ @$(call install_finish, sysklogd)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.30.2
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next reply other threads:[~2021-10-11 14:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-11 14:49 Christian Melki [this message]
2021-10-15 13:33 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211011144954.825006-1-christian.melki@t2data.com \
--to=christian.melki@t2data.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox