mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <rhi@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Roland Hieber <rhi@pengutronix.de>
Subject: [ptxdist] [PATCH v2 2/3] bind: new package
Date: Mon, 24 May 2021 20:34:59 +0200	[thread overview]
Message-ID: <20210524183500.32170-2-rhi@pengutronix.de> (raw)
In-Reply-To: <20210524183500.32170-1-rhi@pengutronix.de>

Newer ISC DHCP versions try to build a packaged BIND library, but fail
at it. Outsource the BIND libs into an extra recipe so we can set the
configure options and BUILD_CC appropriately. This package only builds
the static BIND libraries for now, which is all that is needed by the
DHCP package.

Signed-off-by: Roland Hieber <rhi@pengutronix.de>

---
v2:
 - fix license checksum (no changes to the license expression needed)
 - put menu file into networking section, not project_specific
---
 rules/bind.in   |  10 ++++
 rules/bind.make | 138 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 148 insertions(+)
 create mode 100644 rules/bind.in
 create mode 100644 rules/bind.make

diff --git a/rules/bind.in b/rules/bind.in
new file mode 100644
index 000000000000..a4dbd0a48c3f
--- /dev/null
+++ b/rules/bind.in
@@ -0,0 +1,10 @@
+## SECTION=networking
+
+config BIND
+	tristate
+	prompt "bind"
+	help
+	  The ISC BIND nameserver
+
+	  Currently only used as a library dependency for ISC DHCP, no binaries
+	  are installed to the target.
diff --git a/rules/bind.make b/rules/bind.make
new file mode 100644
index 000000000000..b547eeff0993
--- /dev/null
+++ b/rules/bind.make
@@ -0,0 +1,138 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2021 by Roland Hieber, Pengutronix <rhi@pengutronix.de>
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BIND) += bind
+
+#
+# Paths and names
+#
+BIND_VERSION		:= 9.11.31
+BIND_MD5		:= 40732ca6e4fcc9d022ab0f17b3e55b71
+BIND			:= bind-$(BIND_VERSION)
+BIND_SUFFIX		:= tar.gz
+BIND_URL		:= https://ftp.isc.org/isc/bind9/$(BIND_VERSION)/$(BIND).$(BIND_SUFFIX)
+BIND_SOURCE		:= $(SRCDIR)/$(BIND).$(BIND_SUFFIX)
+BIND_DIR		:= $(BUILDDIR)/$(BIND)
+BIND_LICENSE		:= MPL-2.0 AND ISC AND BSD-3-Clause AND BSD-2-Clause \
+	AND unknown AND JPNIC AND RSA-MD AND OpenSSL AND Apache-2.0
+BIND_LICENSE_FILES	:= \
+	file://LICENSE;md5=f27a50d2e878867827842f2c60e30bfc \
+	file://COPYRIGHT;md5=b88e7ca5f21908e1b2720169f6807cf6
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+BIND_CONF_ENV	:= \
+	$(CROSS_ENV) \
+	BUILD_CC=$(PTXCONF_SETUP_HOST_CC)
+
+#
+# autoconf
+#
+BIND_CONF_TOOL	:= autoconf
+
+# broken options: --disable-afl
+BIND_CONF_OPT	:=  \
+	$(CROSS_AUTOCONF_USR) \
+	--disable-libbind \
+	--enable-buffer-useinline \
+	--disable-warn-shadow \
+	--disable-warn-error \
+	--disable-developer \
+	--disable-seccomp \
+	--disable-kqueue \
+	--disable-epoll \
+	--disable-devpoll \
+	--disable-threads \
+	--disable-native-pkcs11 \
+	--disable-openssl-hash \
+	$(GLOBAL_LARGE_FILE_OPTION) \
+	--disable-backtrace \
+	--disable-symtable \
+	--$(call ptx/endis, PTXCONF_GLOBAL_IPV6)-ipv6 \
+	--disable-tcp-fastopen \
+	--enable-getifaddrs \
+	--disable-chroot \
+	--disable-linux-caps \
+	--enable-atomic \
+	--disable-fixed-rrset \
+	--enable-rpz-nsip \
+	--enable-rpz-nsdname \
+	--disable-filter-aaaa \
+	--disable-dnstap \
+	--disable-querytrace \
+	--enable-full-report \
+	--without-python \
+	--without-python-install-dir \
+	--without-geoip \
+	--without-geoip2 \
+	--without-gssapi \
+	--with-randomdev=/dev/zero \
+	--with-locktype=standard \
+	--without-libtool \
+	--without-openssl \
+	--without-pkcs11 \
+	--without-ecdsa \
+	--without-gost \
+	--without-eddsa \
+	--without-aes \
+	--without-lmdb \
+	--without-libxml2 \
+	--without-libjson \
+	--without-zlib \
+	--without-purify \
+	--without-gperftools-profiler \
+	--without-kame \
+	--without-readline \
+	--without-protobuf-c \
+	--without-libfstrm \
+	--without-docbook-xsl \
+	--without-idnkit \
+	--without-iconv \
+	--without-idnlib \
+	--without-libidn2 \
+	--without-cmocka \
+	--without-tuning \
+	--without-dlopen \
+	--without-dlz-postgres \
+	--without-dlz-mysql \
+	--without-dlz-bdb \
+	--without-dlz-filesystem \
+	--without-dlz-ldap \
+	--without-dlz-odbc \
+	--without-dlz-stub \
+	--without-make-clean
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+# only build the static libraries for now
+BIND_MAKE_OPT := -C lib
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+# only install the static libraries for now
+BIND_INSTALL_OPT := -C lib install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/bind.targetinstall:
+	@$(call targetinfo)
+	# empty, only static libraries are built
+	@$(call touch)
+
+# vim: syntax=make
-- 
2.29.2


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de


  reply	other threads:[~2021-05-24 18:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-24 18:34 [ptxdist] [PATCH v2 1/3] unzip: version bump 5.52 -> 6.00 Roland Hieber
2021-05-24 18:34 ` Roland Hieber [this message]
2021-05-28  7:01   ` [ptxdist] [APPLIED] bind: new package Michael Olbrich
2021-05-24 18:35 ` [ptxdist] [PATCH v2 3/3] dhcp: version bump 4.1.2 -> 4.4.2 Roland Hieber
2021-05-28  7:01   ` [ptxdist] [APPLIED] " Michael Olbrich
2021-05-28  7:01 ` [ptxdist] [APPLIED] unzip: version bump 5.52 -> 6.00 Michael Olbrich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210524183500.32170-2-rhi@pengutronix.de \
    --to=rhi@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox