From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: AVazquez <avazquez.dev@gmail.com>, Sascha Hauer <sha@pengutronix.de>
Subject: Re: [ptxdist] [PATCH v2] ptxd_make_fit_image: Add support for kernel load/entry addresses
Date: Mon, 16 Nov 2020 09:35:58 +0100 [thread overview]
Message-ID: <20201116083558.GC14638@pengutronix.de> (raw)
In-Reply-To: <CAOTEMUTO_PH3qsTfRi=o=ggOdZ00AQgkJnMRrgCEeObXvnaZ8A@mail.gmail.com>
On Mon, Nov 16, 2020 at 09:30:25AM +0100, Alex Vazquez wrote:
> El vie., 13 nov. 2020 a las 9:46, Michael Olbrich
> (<m.olbrich@pengutronix.de>) escribió:
> >
> > On Wed, Nov 11, 2020 at 04:23:39PM +0100, avazquez.dev@gmail.com wrote:
> > > From: AVazquez <avazquez.dev@gmail.com>
> > >
> > > Make it possible to specify load/entry addresses for the kernel.
> > > These are required by the FIT image specification, but in some cases
> > > users may not want to include them, so they are made optional.
> > >
> > > Also add mandatory "os" property for kernel and ramdisk.
> > >
> > > Signed-off-by: AVazquez <avazquez.dev@gmail.com>
> > > ---
> > > Changes since v1:
> > > - load/entry addresses made optional
> > >
> > > platforms/kernel-fit.in | 8 ++++++++
> > > scripts/lib/ptxd_make_fit_image.sh | 14 ++++++++++++++
> > > 2 files changed, 22 insertions(+)
> > >
> > > diff --git a/platforms/kernel-fit.in b/platforms/kernel-fit.in
> > > index 8cbc1a8..b5f9da6 100644
> > > --- a/platforms/kernel-fit.in
> > > +++ b/platforms/kernel-fit.in
> > > @@ -17,6 +17,14 @@ menuconfig KERNEL_FIT
> > >
> > > if KERNEL_FIT
> > >
> > > +config KERNEL_FIT_LOAD
> > > + string
> > > + prompt "Kernel load address (optional)"
> >
> > I'd like some help text here to clarify when this is needed. From what I
> > understand from the discussion, u-boots requires this, right?
> > But barebox does not? Never, or does it depend on the kernel image type?
> >
>
> Ok, I add some help text.
>
> > Sascha, can you help here?
> >
> > > +
> > > +config KERNEL_FIT_ENTRY
> > > + string
> > > + prompt "Kernel entry address (optional)"
> >
> > The same here.
> >
> > > +
> > > config KERNEL_FIT_SIGNED
> > > bool
> > > prompt "sign FIT image"
> > > diff --git a/scripts/lib/ptxd_make_fit_image.sh b/scripts/lib/ptxd_make_fit_image.sh
> > > index 9754d1e..1edf5c5 100644
> > > --- a/scripts/lib/ptxd_make_fit_image.sh
> > > +++ b/scripts/lib/ptxd_make_fit_image.sh
> > > @@ -21,7 +21,20 @@ ptxd_make_image_fit_its() {
> > > data = /incbin/("${image_kernel}");
> > > type = "kernel";
> > > arch = "$(ptxd_get_ptxconf PTXCONF_ARCH_STRING)";
> > > + os = "linux";
> >
> > Sascha, setting this is ok for barebox, right?
> >
> > > compression = "none";
> > > +EOF
> > > + if [ -n "$(ptxd_get_ptxconf PTXCONF_KERNEL_FIT_LOAD)" ]; then
> > > + cat << EOF
> >
> > The code should be indented to align with the code above.
> >
> > if [ ... ]; then
> > cat << EOF
> >
> > I think.
> >
>
> You are right.
> I will prepare a new patch v3.
> Any more changes?
No, I think that's it.
Michael
> > > + load = <$(ptxd_get_ptxconf PTXCONF_KERNEL_FIT_LOAD)>;
> > > +EOF
> > > + fi
> > > + if [ -n "$(ptxd_get_ptxconf PTXCONF_KERNEL_FIT_ENTRY)" ]; then
> > > + cat << EOF
> >
> > same here.
> >
> > Michael
> >
> > > + entry = <$(ptxd_get_ptxconf PTXCONF_KERNEL_FIT_ENTRY)>;
> > > +EOF
> > > + fi
> > > + cat << EOF
> > > hash-1 {
> > > algo = "sha256";
> > > };
> > > @@ -33,6 +46,7 @@ EOF
> > > description = "initramfs";
> > > data = /incbin/("${image_initramfs}");
> > > type = "ramdisk";
> > > + os = "linux";
> > > compression = "none";
> > > hash-1 {
> > > algo = "sha256";
> > > --
> > > 1.9.1
> > >
> > >
> > > _______________________________________________
> > > ptxdist mailing list
> > > ptxdist@pengutronix.de
> > > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> > >
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
prev parent reply other threads:[~2020-11-16 8:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 15:23 avazquez.dev
2020-11-13 8:46 ` Michael Olbrich
2020-11-13 8:54 ` Guillermo Rodriguez Garcia
2020-11-13 8:57 ` Sascha Hauer
2020-11-13 15:02 ` Roland Hieber
2020-11-16 8:30 ` Alex Vazquez
2020-11-16 8:35 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116083558.GC14638@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=avazquez.dev@gmail.com \
--cc=ptxdist@pengutronix.de \
--cc=sha@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox