* [ptxdist] [PATCH v2 1/2] python3-configshell: new package @ 2020-09-21 8:30 Lucas Stach 2020-09-21 8:30 ` [ptxdist] [PATCH v2 2/2] nvmetcli: " Lucas Stach 2020-10-06 8:18 ` [ptxdist] [APPLIED] python3-configshell: " Michael Olbrich 0 siblings, 2 replies; 4+ messages in thread From: Lucas Stach @ 2020-09-21 8:30 UTC (permalink / raw) To: ptxdist A framework to implement simple but nice CLIs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- v2: Use proper SPDX license tag. --- rules/python3-configshell.in | 11 +++++++ rules/python3-configshell.make | 55 ++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 rules/python3-configshell.in create mode 100644 rules/python3-configshell.make diff --git a/rules/python3-configshell.in b/rules/python3-configshell.in new file mode 100644 index 000000000000..e83bd2d6f6fe --- /dev/null +++ b/rules/python3-configshell.in @@ -0,0 +1,11 @@ +## SECTION=python3 + +config PYTHON3_CONFIGSHELL + tristate + select PYTHON3 + select PYTHON3_SIX + select PYTHON3_READLINE + select PYTHON3_PYPARSING + prompt "python3-configshell" + help + A framework to implement simple but nice CLIs. diff --git a/rules/python3-configshell.make b/rules/python3-configshell.make new file mode 100644 index 000000000000..60642b987e9b --- /dev/null +++ b/rules/python3-configshell.make @@ -0,0 +1,55 @@ +# -*-makefile-*- +# +# Copyright (C) 2020 by Lucas Stach <l.stach@pengutronix.de> +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_PYTHON3_CONFIGSHELL) += python3-configshell + +# +# Paths and names +# +PYTHON3_CONFIGSHELL_VERSION := 1.1.28 +PYTHON3_CONFIGSHELL_MD5 := effc6c44784e5cd77e2eacd07bef494d +PYTHON3_CONFIGSHELL := configshell-fb-$(PYTHON3_CONFIGSHELL_VERSION) +PYTHON3_CONFIGSHELL_SUFFIX := tar.gz +PYTHON3_CONFIGSHELL_URL := https://pypi.io/packages/source/c/configshell-fb/$(PYTHON3_CONFIGSHELL).$(PYTHON3_CONFIGSHELL_SUFFIX) +PYTHON3_CONFIGSHELL_SOURCE := $(SRCDIR)/$(PYTHON3_CONFIGSHELL).$(PYTHON3_CONFIGSHELL_SUFFIX) +PYTHON3_CONFIGSHELL_DIR := $(BUILDDIR)/$(PYTHON3_CONFIGSHELL) +PYTHON3_CONFIGSHELL_LICENSE := Apache-2.0 + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# python3 +# +PYTHON3_CONFIGSHELL_CONF_TOOL := python3 + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/python3-configshell.targetinstall: + @$(call targetinfo) + + @$(call install_init, python3-configshell) + @$(call install_fixup, python3-configshell,PRIORITY,optional) + @$(call install_fixup, python3-configshell,SECTION,base) + @$(call install_fixup, python3-configshell,AUTHOR,"Lucas Stach <l.stach@pengutronix.de>") + @$(call install_fixup, python3-configshell,DESCRIPTION,missing) + + @$(call install_glob, python3-configshell, 0, 0, -, \ + $(PYTHON3_SITEPACKAGES)/configshell_fb,, *.py) + + @$(call install_finish, python3-configshell) + + @$(call touch) + +# vim: syntax=make -- 2.20.1 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* [ptxdist] [PATCH v2 2/2] nvmetcli: new package 2020-09-21 8:30 [ptxdist] [PATCH v2 1/2] python3-configshell: new package Lucas Stach @ 2020-09-21 8:30 ` Lucas Stach 2020-10-06 8:18 ` [ptxdist] [APPLIED] " Michael Olbrich 2020-10-06 8:18 ` [ptxdist] [APPLIED] python3-configshell: " Michael Olbrich 1 sibling, 1 reply; 4+ messages in thread From: Lucas Stach @ 2020-09-21 8:30 UTC (permalink / raw) To: ptxdist nvmetcli is a program used for viewing, editing, saving, and starting a Linux kernel NVMe Target, used for an NVMe-over-Fabrics network configuration. It allows an administrator to export a storage resource (such as NVMe devices, files, and volumes) to a local block device and expose them to remote systems based on the NVMe-over-Fabrics specification from http://www.nvmexpress.org. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- v2: - use proper SPDX license tag - fix systemd service option --- projectroot/etc/nvmet/config.json | 0 rules/nvmetcli.in | 29 +++++++++++ rules/nvmetcli.make | 81 +++++++++++++++++++++++++++++++ 3 files changed, 110 insertions(+) create mode 100644 projectroot/etc/nvmet/config.json create mode 100644 rules/nvmetcli.in create mode 100644 rules/nvmetcli.make diff --git a/projectroot/etc/nvmet/config.json b/projectroot/etc/nvmet/config.json new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/rules/nvmetcli.in b/rules/nvmetcli.in new file mode 100644 index 000000000000..28ec1924e27a --- /dev/null +++ b/rules/nvmetcli.in @@ -0,0 +1,29 @@ +## SECTION=shell_and_console + +config NVMETCLI + tristate + select PYTHON3 + select PYTHON3_SIX + select PYTHON3_READLINE + select PYTHON3_PYPARSING + select PYTHON3_CONFIGSHELL + prompt "nvmetcli" + help + nvmetcli is a program used for viewing, editing, saving, and starting + a Linux kernel NVMe Target, used for an NVMe-over-Fabrics network + configuration. It allows an administrator to export a storage + resource (such as NVMe devices, files, and volumes) to a local block + device and expose them to remote systems based on the + NVMe-over-Fabrics specification from http://www.nvmexpress.org. + +if NVMETCLI + +config NVMETCLI_SYSTEMD_SERVICE + bool + depends on INITMETHOD_SYSTEMD + prompt "install nvmet systemd service" + help + Install a systemd service to automatically restore the nvmet + configuration on boot. + +endif diff --git a/rules/nvmetcli.make b/rules/nvmetcli.make new file mode 100644 index 000000000000..b9e30a673e98 --- /dev/null +++ b/rules/nvmetcli.make @@ -0,0 +1,81 @@ +# -*-makefile-*- +# +# Copyright (C) 2020 by Lucas Stach <l.stach@pengutronix.de> +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_NVMETCLI) += nvmetcli + +# +# Paths and names +# +NVMETCLI_VERSION := 0.7 +NVMETCLI_MD5 := eed70ef32d327c814345178dd35d088b +NVMETCLI := nvmetcli-$(NVMETCLI_VERSION) +NVMETCLI_SUFFIX := tar.gz +NVMETCLI_URL := ftp://ftp.infradead.org/pub/nvmetcli/$(NVMETCLI).$(NVMETCLI_SUFFIX) +NVMETCLI_SOURCE := $(SRCDIR)/$(NVMETCLI).$(NVMETCLI_SUFFIX) +NVMETCLI_DIR := $(BUILDDIR)/$(NVMETCLI) +NVMETCLI_LICENSE := Apache-2.0 +NVMETCLI_LICENSE_FILES := file://COPYING;md5=1dece7821bf3fd70fe1309eaa37d52a2 + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# python3 +# +NVMETCLI_CONF_TOOL := python3 + +# ---------------------------------------------------------------------------- +# Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/nvmetcli.install: + @$(call targetinfo) + @$(call world/install, NVMETCLI) + +ifdef PTXCONF_NVMETCLI_SYSTEMD_SERVICE + @install -v -D -m644 $(NVMETCLI_DIR)/nvmet.service \ + $(NVMETCLI_PKGDIR)/usr/lib/systemd/system/nvmet.service +endif + + @$(call touch) + + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/nvmetcli.targetinstall: + @$(call targetinfo) + + @$(call install_init, nvmetcli) + @$(call install_fixup, nvmetcli,PRIORITY,optional) + @$(call install_fixup, nvmetcli,SECTION,base) + @$(call install_fixup, nvmetcli,AUTHOR,"Lucas Stach <l.stach@pengutronix.de>") + @$(call install_fixup, nvmetcli,DESCRIPTION,missing) + + @$(call install_glob, nvmetcli, 0, 0, -, \ + $(PYTHON3_SITEPACKAGES)/nvmet,, *.py) + @$(call install_copy, nvmetcli, 0, 0, 0755, -, /usr/sbin/nvmetcli) + +ifdef PTXCONF_NVMETCLI_SYSTEMD_SERVICE + @$(call install_copy, nvmetcli, 0, 0, 0644, -, /usr/lib/systemd/system/nvmet.service) + @$(call install_link, nvmetcli, ../nvmet.service, \ + /usr/lib/systemd/system/multi-user.target.wants/nvmet.service) + + @$(call install_alternative, nvmetcli, 0, 0, 0644, /etc/nvmet/config.json) +endif + + @$(call install_finish, nvmetcli) + + @$(call touch) + +# vim: syntax=make -- 2.20.1 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [APPLIED] nvmetcli: new package 2020-09-21 8:30 ` [ptxdist] [PATCH v2 2/2] nvmetcli: " Lucas Stach @ 2020-10-06 8:18 ` Michael Olbrich 0 siblings, 0 replies; 4+ messages in thread From: Michael Olbrich @ 2020-10-06 8:18 UTC (permalink / raw) To: ptxdist; +Cc: Lucas Stach Thanks, applied as 03bd1cb4dae32dd75da41a1a80d4355be4e5bef7. Michael [sent from post-receive hook] On Tue, 06 Oct 2020 10:18:37 +0200, Lucas Stach <l.stach@pengutronix.de> wrote: > nvmetcli is a program used for viewing, editing, saving, and starting a > Linux kernel NVMe Target, used for an NVMe-over-Fabrics network > configuration. It allows an administrator to export a storage resource > (such as NVMe devices, files, and volumes) to a local block device and > expose them to remote systems based on the NVMe-over-Fabrics > specification from http://www.nvmexpress.org. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Message-Id: <20200921083057.4074995-2-l.stach@pengutronix.de> > Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> > > diff --git a/projectroot/etc/nvmet/config.json b/projectroot/etc/nvmet/config.json > new file mode 100644 > index 000000000000..e69de29bb2d1 > diff --git a/rules/nvmetcli.in b/rules/nvmetcli.in > new file mode 100644 > index 000000000000..28ec1924e27a > --- /dev/null > +++ b/rules/nvmetcli.in > @@ -0,0 +1,29 @@ > +## SECTION=shell_and_console > + > +config NVMETCLI > + tristate > + select PYTHON3 > + select PYTHON3_SIX > + select PYTHON3_READLINE > + select PYTHON3_PYPARSING > + select PYTHON3_CONFIGSHELL > + prompt "nvmetcli" > + help > + nvmetcli is a program used for viewing, editing, saving, and starting > + a Linux kernel NVMe Target, used for an NVMe-over-Fabrics network > + configuration. It allows an administrator to export a storage > + resource (such as NVMe devices, files, and volumes) to a local block > + device and expose them to remote systems based on the > + NVMe-over-Fabrics specification from http://www.nvmexpress.org. > + > +if NVMETCLI > + > +config NVMETCLI_SYSTEMD_SERVICE > + bool > + depends on INITMETHOD_SYSTEMD > + prompt "install nvmet systemd service" > + help > + Install a systemd service to automatically restore the nvmet > + configuration on boot. > + > +endif > diff --git a/rules/nvmetcli.make b/rules/nvmetcli.make > new file mode 100644 > index 000000000000..b9e30a673e98 > --- /dev/null > +++ b/rules/nvmetcli.make > @@ -0,0 +1,81 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2020 by Lucas Stach <l.stach@pengutronix.de> > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_NVMETCLI) += nvmetcli > + > +# > +# Paths and names > +# > +NVMETCLI_VERSION := 0.7 > +NVMETCLI_MD5 := eed70ef32d327c814345178dd35d088b > +NVMETCLI := nvmetcli-$(NVMETCLI_VERSION) > +NVMETCLI_SUFFIX := tar.gz > +NVMETCLI_URL := ftp://ftp.infradead.org/pub/nvmetcli/$(NVMETCLI).$(NVMETCLI_SUFFIX) > +NVMETCLI_SOURCE := $(SRCDIR)/$(NVMETCLI).$(NVMETCLI_SUFFIX) > +NVMETCLI_DIR := $(BUILDDIR)/$(NVMETCLI) > +NVMETCLI_LICENSE := Apache-2.0 > +NVMETCLI_LICENSE_FILES := file://COPYING;md5=1dece7821bf3fd70fe1309eaa37d52a2 > + > +# ---------------------------------------------------------------------------- > +# Prepare > +# ---------------------------------------------------------------------------- > + > +# > +# python3 > +# > +NVMETCLI_CONF_TOOL := python3 > + > +# ---------------------------------------------------------------------------- > +# Install > +# ---------------------------------------------------------------------------- > + > +$(STATEDIR)/nvmetcli.install: > + @$(call targetinfo) > + @$(call world/install, NVMETCLI) > + > +ifdef PTXCONF_NVMETCLI_SYSTEMD_SERVICE > + @install -v -D -m644 $(NVMETCLI_DIR)/nvmet.service \ > + $(NVMETCLI_PKGDIR)/usr/lib/systemd/system/nvmet.service > +endif > + > + @$(call touch) > + > + > +# ---------------------------------------------------------------------------- > +# Target-Install > +# ---------------------------------------------------------------------------- > + > +$(STATEDIR)/nvmetcli.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, nvmetcli) > + @$(call install_fixup, nvmetcli,PRIORITY,optional) > + @$(call install_fixup, nvmetcli,SECTION,base) > + @$(call install_fixup, nvmetcli,AUTHOR,"Lucas Stach <l.stach@pengutronix.de>") > + @$(call install_fixup, nvmetcli,DESCRIPTION,missing) > + > + @$(call install_glob, nvmetcli, 0, 0, -, \ > + $(PYTHON3_SITEPACKAGES)/nvmet,, *.py) > + @$(call install_copy, nvmetcli, 0, 0, 0755, -, /usr/sbin/nvmetcli) > + > +ifdef PTXCONF_NVMETCLI_SYSTEMD_SERVICE > + @$(call install_copy, nvmetcli, 0, 0, 0644, -, /usr/lib/systemd/system/nvmet.service) > + @$(call install_link, nvmetcli, ../nvmet.service, \ > + /usr/lib/systemd/system/multi-user.target.wants/nvmet.service) > + > + @$(call install_alternative, nvmetcli, 0, 0, 0644, /etc/nvmet/config.json) > +endif > + > + @$(call install_finish, nvmetcli) > + > + @$(call touch) > + > +# vim: syntax=make _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [APPLIED] python3-configshell: new package 2020-09-21 8:30 [ptxdist] [PATCH v2 1/2] python3-configshell: new package Lucas Stach 2020-09-21 8:30 ` [ptxdist] [PATCH v2 2/2] nvmetcli: " Lucas Stach @ 2020-10-06 8:18 ` Michael Olbrich 1 sibling, 0 replies; 4+ messages in thread From: Michael Olbrich @ 2020-10-06 8:18 UTC (permalink / raw) To: ptxdist; +Cc: Lucas Stach Thanks, applied as 623c1c6127ce501e628649facb24160fd6eea3da. Michael [sent from post-receive hook] On Tue, 06 Oct 2020 10:18:36 +0200, Lucas Stach <l.stach@pengutronix.de> wrote: > A framework to implement simple but nice CLIs. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Message-Id: <20200921083057.4074995-1-l.stach@pengutronix.de> > Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> > > diff --git a/rules/python3-configshell.in b/rules/python3-configshell.in > new file mode 100644 > index 000000000000..e83bd2d6f6fe > --- /dev/null > +++ b/rules/python3-configshell.in > @@ -0,0 +1,11 @@ > +## SECTION=python3 > + > +config PYTHON3_CONFIGSHELL > + tristate > + select PYTHON3 > + select PYTHON3_SIX > + select PYTHON3_READLINE > + select PYTHON3_PYPARSING > + prompt "python3-configshell" > + help > + A framework to implement simple but nice CLIs. > diff --git a/rules/python3-configshell.make b/rules/python3-configshell.make > new file mode 100644 > index 000000000000..60642b987e9b > --- /dev/null > +++ b/rules/python3-configshell.make > @@ -0,0 +1,55 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2020 by Lucas Stach <l.stach@pengutronix.de> > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_PYTHON3_CONFIGSHELL) += python3-configshell > + > +# > +# Paths and names > +# > +PYTHON3_CONFIGSHELL_VERSION := 1.1.28 > +PYTHON3_CONFIGSHELL_MD5 := effc6c44784e5cd77e2eacd07bef494d > +PYTHON3_CONFIGSHELL := configshell-fb-$(PYTHON3_CONFIGSHELL_VERSION) > +PYTHON3_CONFIGSHELL_SUFFIX := tar.gz > +PYTHON3_CONFIGSHELL_URL := https://pypi.io/packages/source/c/configshell-fb/$(PYTHON3_CONFIGSHELL).$(PYTHON3_CONFIGSHELL_SUFFIX) > +PYTHON3_CONFIGSHELL_SOURCE := $(SRCDIR)/$(PYTHON3_CONFIGSHELL).$(PYTHON3_CONFIGSHELL_SUFFIX) > +PYTHON3_CONFIGSHELL_DIR := $(BUILDDIR)/$(PYTHON3_CONFIGSHELL) > +PYTHON3_CONFIGSHELL_LICENSE := Apache-2.0 > + > +# ---------------------------------------------------------------------------- > +# Prepare > +# ---------------------------------------------------------------------------- > + > +# > +# python3 > +# > +PYTHON3_CONFIGSHELL_CONF_TOOL := python3 > + > +# ---------------------------------------------------------------------------- > +# Target-Install > +# ---------------------------------------------------------------------------- > + > +$(STATEDIR)/python3-configshell.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, python3-configshell) > + @$(call install_fixup, python3-configshell,PRIORITY,optional) > + @$(call install_fixup, python3-configshell,SECTION,base) > + @$(call install_fixup, python3-configshell,AUTHOR,"Lucas Stach <l.stach@pengutronix.de>") > + @$(call install_fixup, python3-configshell,DESCRIPTION,missing) > + > + @$(call install_glob, python3-configshell, 0, 0, -, \ > + $(PYTHON3_SITEPACKAGES)/configshell_fb,, *.py) > + > + @$(call install_finish, python3-configshell) > + > + @$(call touch) > + > +# vim: syntax=make _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-10-06 8:18 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-09-21 8:30 [ptxdist] [PATCH v2 1/2] python3-configshell: new package Lucas Stach 2020-09-21 8:30 ` [ptxdist] [PATCH v2 2/2] nvmetcli: " Lucas Stach 2020-10-06 8:18 ` [ptxdist] [APPLIED] " Michael Olbrich 2020-10-06 8:18 ` [ptxdist] [APPLIED] python3-configshell: " Michael Olbrich
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox