mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Ladislav Michl <ladis@linux-mips.org>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] gpsd: fix gpsdctl@.service
Date: Mon, 3 Aug 2020 10:35:52 +0200	[thread overview]
Message-ID: <20200803083552.GA985634@lenoch> (raw)
In-Reply-To: <20200803063606.GK17724@pengutronix.de>

On Mon, Aug 03, 2020 at 08:36:06AM +0200, Michael Olbrich wrote:
> On Sun, Aug 02, 2020 at 07:46:09PM +0200, Ladislav Michl wrote:
> > gpsdctl@.service is supposed to call gpsdctl which is not installed
> > at all. Also fix gpsctl vs gpsdctl confusion.
> > 
> > Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> > ---
> >  projectroot/usr/lib/systemd/system/gpsdctl@.service | 4 ++--
> >  rules/gpsd.in                                       | 9 +++++++++
> >  rules/gpsd.make                                     | 8 +++++---
> >  3 files changed, 16 insertions(+), 5 deletions(-)
> > 
> > diff --git a/projectroot/usr/lib/systemd/system/gpsdctl@.service b/projectroot/usr/lib/systemd/system/gpsdctl@.service
> > index 24d291408..6266fd8b8 100644
> > --- a/projectroot/usr/lib/systemd/system/gpsdctl@.service
> > +++ b/projectroot/usr/lib/systemd/system/gpsdctl@.service
> > @@ -8,5 +8,5 @@ After=dev-%i.device
> >  Type=oneshot
> >  Environment="GPSD_SOCKET=/var/run/gpsd.sock"
> >  RemainAfterExit=yes
> > -ExecStart=/usr/bin/gpsdctl add /dev/%I
> > -ExecStop=/usr/bin/gpsdctl remove /dev/%I
> > +ExecStart=/usr/sbin/gpsdctl add /dev/%I
> > +ExecStop=/usr/sbin/gpsdctl remove /dev/%I
> > diff --git a/rules/gpsd.in b/rules/gpsd.in
> > index b69570af0..b69accac3 100644
> > --- a/rules/gpsd.in
> > +++ b/rules/gpsd.in
> > @@ -260,10 +260,19 @@ menu "install options"
> >  		  queries with a format that is substantially easier to
> >  		  parse than the NMEA 0183 emitted by most GPS receivers.
> >  
> > +	config GPSD_GPSDCTL
> > +		bool
> > +		prompt "gpdsctl"
> > +		help
> > +		  gpdsctl is a tool for sending commands to an instance of
> > +		  gpsd over its control socket to add or remove devices from
> > +		  the daemon's device list.
> > +
> >  	config GPSD_SYSTEMD_UNIT
> >  		bool
> >  		default y
> >  		depends on INITMETHOD_SYSTEMD && GPSD_GPSD
> > +		select GPSD_GPSDCTL
> >  		prompt "systemd unit files for gpsd"
> >  
> >  	config GPSD_GPSD_ARGS
> > diff --git a/rules/gpsd.make b/rules/gpsd.make
> > index 7f7e369f3..48bb643bc 100644
> > --- a/rules/gpsd.make
> > +++ b/rules/gpsd.make
> > @@ -43,7 +43,8 @@ GPSD_PROGS-$(PTXCONF_GPSD_GPSMON)	+= gpsmon
> >  GPSD_PROGS-$(PTXCONF_GPSD_NTPSHMMON)	+= ntpshmmon
> >  GPSD_PROGS-$(PTXCONF_GPSD_PPSCHECK)	+= ppscheck
> >  
> > -GPSD_BUILD_CLIENTS := $(if $(strip $(GPSD_PROGS-y)),yes,no)
> > +GPSD_BUILD_CLIENTS := $(call ptx/ifdef, PTXCONF_GPSD_GPSDCTL, yes, \
> > +			$(if $(strip $(GPSD_PROGS-y)), yes, no))
> >  
> >  # Python programs
> >  GPSD_PROGS-$(PTXCONF_GPSD_GEGPS)	+= gegps
> > @@ -160,6 +161,9 @@ $(STATEDIR)/gpsd.targetinstall:
> >  ifdef PTXCONF_GPSD_GPSD
> >  	@$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd)
> >  endif
> > +ifdef PTXCONF_GPSD_GPSDCTL
> > +	@$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdctl)
> > +endif
> >  ifdef PTXCONF_GPSD_SYSTEMD_UNIT
> >  	@$(call install_alternative, gpsd, 0, 0, 644, \
> >  		/usr/lib/systemd/system/gpsd.service)
> > @@ -172,11 +176,9 @@ ifdef PTXCONF_GPSD_SYSTEMD_UNIT
> >  		/usr/lib/systemd/system/gpsd.socket)
> >  	@$(call install_link, gpsd, ../gpsd.socket, \
> >  		/usr/lib/systemd/system/sockets.target.wants/gpsd.socket)
> > -ifdef PTXCONF_GPSD_GPSCTL
> 
> So, I don't know a lot about gpsd. So I need some clarification here.
> 
> There is a gpsd.service and the gpsdctl@.service template. What do they do?
> Does gpsd.service do anything useful without gpsdctl@.service?

gpsd.service just starts gpsd as a daemon on a device passed as its
argument (GPSD_GPSD_ARGS). But GPS receiver could be hotplugged as well
and that's when gpsdctl@.service comes to action.

> If yes then we should probably install gpsdctl@.service separately and not
> add the 'select GPSD_GPSDCTL' dependency above.

As gpsdctl@.service calls gpsdctl, which is installed once GPSD_GPSDCTL
selected, that dependency is needed.

> If no then I think the GPSD_GPSDCTL option is not needed and it can be
> gpsdctl can be installed for GPSD_GPSD.

This option is usefull if developer wishes to talk to running gpsd using
gpsdctl at his own.

	ladis

> Michael
>
> >  	@$(call install_alternative, gpsd, 0, 0, 644, \
> >  		/usr/lib/systemd/system/gpsdctl@.service)
> >  endif
> > -endif
> >  ifdef PTXCONF_GPSD_PYTHON
> >  	@$(call install_glob, gpsd, 0, 0, -, \
> >  		/usr/lib/python$(PYTHON3_MAJORMINOR), *.so *.py)
> > -- 
> > 2.28.0
> > 
> > 
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> > To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de

  reply	other threads:[~2020-08-03  8:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-02 17:46 Ladislav Michl
2020-08-03  6:36 ` Michael Olbrich
2020-08-03  8:35   ` Ladislav Michl [this message]
2020-08-03  9:03     ` Michael Olbrich
2020-08-03  9:36       ` Ladislav Michl
2020-08-03 14:18         ` Roland Hieber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200803083552.GA985634@lenoch \
    --to=ladis@linux-mips.org \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox