From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] gpsd: fix gpsdctl@.service
Date: Mon, 3 Aug 2020 08:36:06 +0200 [thread overview]
Message-ID: <20200803063606.GK17724@pengutronix.de> (raw)
In-Reply-To: <20200802174609.GA776640@lenoch>
On Sun, Aug 02, 2020 at 07:46:09PM +0200, Ladislav Michl wrote:
> gpsdctl@.service is supposed to call gpsdctl which is not installed
> at all. Also fix gpsctl vs gpsdctl confusion.
>
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
> projectroot/usr/lib/systemd/system/gpsdctl@.service | 4 ++--
> rules/gpsd.in | 9 +++++++++
> rules/gpsd.make | 8 +++++---
> 3 files changed, 16 insertions(+), 5 deletions(-)
>
> diff --git a/projectroot/usr/lib/systemd/system/gpsdctl@.service b/projectroot/usr/lib/systemd/system/gpsdctl@.service
> index 24d291408..6266fd8b8 100644
> --- a/projectroot/usr/lib/systemd/system/gpsdctl@.service
> +++ b/projectroot/usr/lib/systemd/system/gpsdctl@.service
> @@ -8,5 +8,5 @@ After=dev-%i.device
> Type=oneshot
> Environment="GPSD_SOCKET=/var/run/gpsd.sock"
> RemainAfterExit=yes
> -ExecStart=/usr/bin/gpsdctl add /dev/%I
> -ExecStop=/usr/bin/gpsdctl remove /dev/%I
> +ExecStart=/usr/sbin/gpsdctl add /dev/%I
> +ExecStop=/usr/sbin/gpsdctl remove /dev/%I
> diff --git a/rules/gpsd.in b/rules/gpsd.in
> index b69570af0..b69accac3 100644
> --- a/rules/gpsd.in
> +++ b/rules/gpsd.in
> @@ -260,10 +260,19 @@ menu "install options"
> queries with a format that is substantially easier to
> parse than the NMEA 0183 emitted by most GPS receivers.
>
> + config GPSD_GPSDCTL
> + bool
> + prompt "gpdsctl"
> + help
> + gpdsctl is a tool for sending commands to an instance of
> + gpsd over its control socket to add or remove devices from
> + the daemon's device list.
> +
> config GPSD_SYSTEMD_UNIT
> bool
> default y
> depends on INITMETHOD_SYSTEMD && GPSD_GPSD
> + select GPSD_GPSDCTL
> prompt "systemd unit files for gpsd"
>
> config GPSD_GPSD_ARGS
> diff --git a/rules/gpsd.make b/rules/gpsd.make
> index 7f7e369f3..48bb643bc 100644
> --- a/rules/gpsd.make
> +++ b/rules/gpsd.make
> @@ -43,7 +43,8 @@ GPSD_PROGS-$(PTXCONF_GPSD_GPSMON) += gpsmon
> GPSD_PROGS-$(PTXCONF_GPSD_NTPSHMMON) += ntpshmmon
> GPSD_PROGS-$(PTXCONF_GPSD_PPSCHECK) += ppscheck
>
> -GPSD_BUILD_CLIENTS := $(if $(strip $(GPSD_PROGS-y)),yes,no)
> +GPSD_BUILD_CLIENTS := $(call ptx/ifdef, PTXCONF_GPSD_GPSDCTL, yes, \
> + $(if $(strip $(GPSD_PROGS-y)), yes, no))
>
> # Python programs
> GPSD_PROGS-$(PTXCONF_GPSD_GEGPS) += gegps
> @@ -160,6 +161,9 @@ $(STATEDIR)/gpsd.targetinstall:
> ifdef PTXCONF_GPSD_GPSD
> @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsd)
> endif
> +ifdef PTXCONF_GPSD_GPSDCTL
> + @$(call install_copy, gpsd, 0, 0, 0755, -, /usr/sbin/gpsdctl)
> +endif
> ifdef PTXCONF_GPSD_SYSTEMD_UNIT
> @$(call install_alternative, gpsd, 0, 0, 644, \
> /usr/lib/systemd/system/gpsd.service)
> @@ -172,11 +176,9 @@ ifdef PTXCONF_GPSD_SYSTEMD_UNIT
> /usr/lib/systemd/system/gpsd.socket)
> @$(call install_link, gpsd, ../gpsd.socket, \
> /usr/lib/systemd/system/sockets.target.wants/gpsd.socket)
> -ifdef PTXCONF_GPSD_GPSCTL
So, I don't know a lot about gpsd. So I need some clarification here.
There is a gpsd.service and the gpsdctl@.service template. What do they do?
Does gpsd.service do anything useful without gpsdctl@.service?
If yes then we should probably install gpsdctl@.service separately and not
add the 'select GPSD_GPSDCTL' dependency above.
If no then I think the GPSD_GPSDCTL option is not needed and it can be
gpsdctl can be installed for GPSD_GPSD.
Michael
> @$(call install_alternative, gpsd, 0, 0, 644, \
> /usr/lib/systemd/system/gpsdctl@.service)
> endif
> -endif
> ifdef PTXCONF_GPSD_PYTHON
> @$(call install_glob, gpsd, 0, 0, -, \
> /usr/lib/python$(PYTHON3_MAJORMINOR), *.so *.py)
> --
> 2.28.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
> To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2020-08-03 6:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-02 17:46 Ladislav Michl
2020-08-03 6:36 ` Michael Olbrich [this message]
2020-08-03 8:35 ` Ladislav Michl
2020-08-03 9:03 ` Michael Olbrich
2020-08-03 9:36 ` Ladislav Michl
2020-08-03 14:18 ` Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200803063606.GK17724@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox