From: Denis Osterland-Heim <denis.osterland@diehl.com>
To: "ptxdist@pengutronix.de" <ptxdist@pengutronix.de>
Subject: [ptxdist] [PATCH v2 0/3] Freescale/NXP i.MX mfgtools 3.0
Date: Thu, 26 Mar 2020 17:03:57 +0000 [thread overview]
Message-ID: <20200326170225.9586-1-Denis.Osterland@diehl.com> (raw)
v1->v2:
- 1/3 use tabs for defines, suggested by Roland Hiebler
- 1/3 add dummy version before git hash, suggested by Michael Olbricht,
Roland Hiebler and Guillermo Rodriguez Garcia
- 1/3 remove obsolete CREDITS reference, suggested by Roland Hiebler
- 3/3 version bump to 1.3.154
- 3/3 write .tarball-version in extract.post, suggested by Michael Olbricht
This patch series adds support for the Freescale/NXP mfgtools 3.0.
You can use them with vanilla kernel and barebox.
There are two known issues:
- the git downloads => no stable md5 sum
- the linuxrc provided by imx-uuc uses array syntax
I have a version of the linuxrc script where I replaced the array
stuff with blank separation, but not sure if this should be put as
projectroot/linuxrc in ptxdist.
Here are some examples how to use it. I have tested it with a i.MX6ull EVK
barebox-2020.02.0 and linux-5.4.25.
The command `uuu barebox-image` is equivalent to `imx-usb-loader barebox-image`.
The example
https://www.barebox.org/doc/latest/user/usb.html#android-fastboot-support
can be done with a `uuu boot.uu` command.
boot.uu:
```
uuu_version 1.0.1
CFG: FB: -chip imx<variant> -pid 0x0104 -vid 0x1d6b
FB: flash kernel linuximage
FB: flash devicetree imx<your-board>.dtb
FB: flash initrd root.cpio.gz
FB: oem exec global linux.bootargs.fa=rdinit=/sbin/init
FB: oem exec bootm
FB: done
```
To run a shell command a kernel with USB gadgets/functionfs enabled
and imx-uuc install on target is needed.
This is an example of whole USB boot sequence and a command
executed in linux user space.
To see the output of the echo, the command is `uuu -v hello.uu`
hello.uu:
```
uuu_version 1.0.1
SDP: dcd -f barebox-image
SDP: write -f barebox-image -ivt 0
SDP: jump -f barebox-image
CFG: FB: -chip imx<variant> -pid 0x0104 -vid 0x1d6b
FB: flash kernel linuximage
FB: flash devicetree imx<your-board>.dtb
FB: flash initrd root.cpio.gz
FB: oem exec global linux.bootargs.fa=rdinit=/linuxrc
FB: oem exec bootm
FBK: ucmd echo "Hello World"
FBK: done
```
.../0001-sh-does-not-support-array-syntax.patch | 117 +++++++++++++++++++++
.../series | 4 +
rules/host-libzip.in | 8 ++
rules/host-libzip.make | 11 ++
rules/host-mfgtools.in | 13 +++
rules/host-mfgtools.make | 41 ++++++++
rules/imx-uuc.in | 7 ++
rules/imx-uuc.make | 60 +++++++++++
8 files changed, 261 insertions(+)
Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
- Informationen zum Datenschutz, insbesondere zu Ihren Rechten, erhalten Sie unter https://www.diehl.com/group/de/transparenz-und-informationspflichten/
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
- For general information on data protection and your respective rights please visit https://www.diehl.com/group/en/transparency-and-information-obligations/
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2020-03-26 17:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 17:03 Denis Osterland-Heim [this message]
2020-03-26 17:03 ` [ptxdist] [PATCH v2 1/3] imx-uuc: new package Denis Osterland-Heim
2020-03-27 12:06 ` Michael Olbrich
2020-03-27 13:07 ` Denis Osterland-Heim
2020-03-31 5:29 ` [ptxdist] [PATCH v2] fixup! " Denis Osterland-Heim
2020-04-01 15:08 ` Michael Olbrich
2020-04-02 6:28 ` Denis Osterland-Heim
2020-04-02 6:39 ` Michael Olbrich
2020-04-02 15:03 ` [ptxdist] [v2] " Michael Olbrich
2020-04-03 5:58 ` [ptxdist] [APPLIED] [v2,1/3] " Michael Olbrich
2020-03-26 17:03 ` [ptxdist] [PATCH v2 2/3] host-libzip: " Denis Osterland-Heim
2020-04-03 5:58 ` [ptxdist] [APPLIED] [v2,2/3] " Michael Olbrich
2020-03-26 17:03 ` [ptxdist] [PATCH v2 3/3] host-mfgtools: " Denis Osterland-Heim
2020-04-02 15:03 ` [ptxdist] [v2,3/3] " Michael Olbrich
2020-03-27 12:41 ` [ptxdist] [PATCH v2 0/3] Freescale/NXP i.MX mfgtools 3.0 Michael Olbrich
2020-03-27 13:01 ` Denis Osterland-Heim
2020-03-27 13:16 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200326170225.9586-1-Denis.Osterland@diehl.com \
--to=denis.osterland@diehl.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox