From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from eddie.linux-mips.org ([148.251.95.138] helo=cvs.linux-mips.org) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1jDvDt-0007Gu-CC for ptxdist@pengutronix.de; Mon, 16 Mar 2020 20:16:27 +0100 Received: (from localhost user: 'ladis' uid#1021 fake: STDIN (ladis@eddie.linux-mips.org)) by eddie.linux-mips.org id S23993112AbgCPTQZNeQ6P (ORCPT ); Mon, 16 Mar 2020 20:16:25 +0100 Date: Mon, 16 Mar 2020 20:16:24 +0100 From: Ladislav Michl Message-ID: <20200316191624.GD16217@lenoch> References: <20200316191435.GA16217@lenoch> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20200316191435.GA16217@lenoch> Subject: [ptxdist] [PATCH 3/4] dnsmasq: install dnsmasq.conf from package source List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Reply-To: ptxdist@pengutronix.de Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: ptxdist-bounces@pengutronix.de Sender: "ptxdist" To: ptxdist@pengutronix.de As projectroot's dnsmasq.conf is copied from example config of dnsmasq package, let's remove it from projectroot. Signed-off-by: Ladislav Michl --- projectroot/etc/dnsmasq.conf | 679 ----------------------------------- rules/dnsmasq.make | 15 + 2 files changed, 15 insertions(+), 679 deletions(-) delete mode 100644 projectroot/etc/dnsmasq.conf diff --git a/projectroot/etc/dnsmasq.conf b/projectroot/etc/dnsmasq.conf deleted file mode 100644 index 8548b43ed..000000000 --- a/projectroot/etc/dnsmasq.conf +++ /dev/null @@ -1,679 +0,0 @@ -# Configuration file for dnsmasq. -# -# Format is one option per line, legal options are the same -# as the long options legal on the command line. See -# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. - -# Listen on this specific port instead of the standard DNS port -# (53). Setting this to zero completely disables DNS function, -# leaving only DHCP and/or TFTP. -#port=5353 - -# The following two options make you a better netizen, since they -# tell dnsmasq to filter out queries which the public DNS cannot -# answer, and which load the servers (especially the root servers) -# unnecessarily. If you have a dial-on-demand link they also stop -# these requests from bringing up the link unnecessarily. - -# Never forward plain names (without a dot or domain part) -#domain-needed -# Never forward addresses in the non-routed address spaces. -#bogus-priv - -# Uncomment these to enable DNSSEC validation and caching: -# (Requires dnsmasq to be built with DNSSEC option.) -#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf -#dnssec - -# Replies which are not DNSSEC signed may be legitimate, because the domain -# is unsigned, or may be forgeries. Setting this option tells dnsmasq to -# check that an unsigned reply is OK, by finding a secure proof that a DS -# record somewhere between the root and the domain does not exist. -# The cost of setting this is that even queries in unsigned domains will need -# one or more extra DNS queries to verify. -#dnssec-check-unsigned - -# Uncomment this to filter useless windows-originated DNS requests -# which can trigger dial-on-demand links needlessly. -# Note that (amongst other things) this blocks all SRV requests, -# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. -# This option only affects forwarding, SRV records originating for -# dnsmasq (via srv-host= lines) are not suppressed by it. -#filterwin2k - -# Change this line if you want dns to get its upstream servers from -# somewhere other that /etc/resolv.conf -#resolv-file= - -# By default, dnsmasq will send queries to any of the upstream -# servers it knows about and tries to favour servers to are known -# to be up. Uncommenting this forces dnsmasq to try each query -# with each server strictly in the order they appear in -# /etc/resolv.conf -#strict-order - -# If you don't want dnsmasq to read /etc/resolv.conf or any other -# file, getting its servers from this file instead (see below), then -# uncomment this. -#no-resolv - -# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv -# files for changes and re-read them then uncomment this. -#no-poll - -# Add other name servers here, with domain specs if they are for -# non-public domains. -#server=/localnet/192.168.0.1 - -# Example of routing PTR queries to nameservers: this will send all -# address->name queries for 192.168.3/24 to nameserver 10.1.2.3 -#server=/3.168.192.in-addr.arpa/10.1.2.3 - -# Add local-only domains here, queries in these domains are answered -# from /etc/hosts or DHCP only. -#local=/localnet/ - -# Add domains which you want to force to an IP address here. -# The example below send any host in double-click.net to a local -# web-server. -#address=/double-click.net/127.0.0.1 - -# --address (and --server) work with IPv6 addresses too. -#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83 - -# Add the IPs of all queries to yahoo.com, google.com, and their -# subdomains to the vpn and search ipsets: -#ipset=/yahoo.com/google.com/vpn,search - -# You can control how dnsmasq talks to a server: this forces -# queries to 10.1.2.3 to be routed via eth1 -# server=10.1.2.3@eth1 - -# and this sets the source (ie local) address used to talk to -# 10.1.2.3 to 192.168.1.1 port 55 (there must be an interface with that -# IP on the machine, obviously). -# server=10.1.2.3@192.168.1.1#55 - -# If you want dnsmasq to change uid and gid to something other -# than the default, edit the following lines. -#user= -#group= - -# If you want dnsmasq to listen for DHCP and DNS requests only on -# specified interfaces (and the loopback) give the name of the -# interface (eg eth0) here. -# Repeat the line for more than one interface. -#interface= -# Or you can specify which interface _not_ to listen on -#except-interface= -# Or which to listen on by address (remember to include 127.0.0.1 if -# you use this.) -#listen-address= -# If you want dnsmasq to provide only DNS service on an interface, -# configure it as shown above, and then use the following line to -# disable DHCP and TFTP on it. -#no-dhcp-interface= - -# On systems which support it, dnsmasq binds the wildcard address, -# even when it is listening on only some interfaces. It then discards -# requests that it shouldn't reply to. This has the advantage of -# working even when interfaces come and go and change address. If you -# want dnsmasq to really bind only the interfaces it is listening on, -# uncomment this option. About the only time you may need this is when -# running another nameserver on the same machine. -#bind-interfaces - -# If you don't want dnsmasq to read /etc/hosts, uncomment the -# following line. -#no-hosts -# or if you want it to read another file, as well as /etc/hosts, use -# this. -#addn-hosts=/etc/banner_add_hosts - -# Set this (and domain: see below) if you want to have a domain -# automatically added to simple names in a hosts-file. -#expand-hosts - -# Set the domain for dnsmasq. this is optional, but if it is set, it -# does the following things. -# 1) Allows DHCP hosts to have fully qualified domain names, as long -# as the domain part matches this setting. -# 2) Sets the "domain" DHCP option thereby potentially setting the -# domain of all systems configured by DHCP -# 3) Provides the domain part for "expand-hosts" -#domain=thekelleys.org.uk - -# Set a different domain for a particular subnet -#domain=wireless.thekelleys.org.uk,192.168.2.0/24 - -# Same idea, but range rather then subnet -#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200 - -# Uncomment this to enable the integrated DHCP server, you need -# to supply the range of addresses available for lease and optionally -# a lease time. If you have more than one network, you will need to -# repeat this for each network on which you want to supply DHCP -# service. -#dhcp-range=192.168.0.50,192.168.0.150,12h - -# This is an example of a DHCP range where the netmask is given. This -# is needed for networks we reach the dnsmasq DHCP server via a relay -# agent. If you don't know what a DHCP relay agent is, you probably -# don't need to worry about this. -#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h - -# This is an example of a DHCP range which sets a tag, so that -# some DHCP options may be set only for this network. -#dhcp-range=set:red,192.168.0.50,192.168.0.150 - -# Use this DHCP range only when the tag "green" is set. -#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h - -# Specify a subnet which can't be used for dynamic address allocation, -# is available for hosts with matching --dhcp-host lines. Note that -# dhcp-host declarations will be ignored unless there is a dhcp-range -# of some type for the subnet in question. -# In this case the netmask is implied (it comes from the network -# configuration on the machine running dnsmasq) it is possible to give -# an explicit netmask instead. -#dhcp-range=192.168.0.0,static - -# Enable DHCPv6. Note that the prefix-length does not need to be specified -# and defaults to 64 if missing/ -#dhcp-range=1234::2, 1234::500, 64, 12h - -# Do Router Advertisements, BUT NOT DHCP for this subnet. -#dhcp-range=1234::, ra-only - -# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and -# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack -# hosts. Use the DHCPv4 lease to derive the name, network segment and -# MAC address and assume that the host will also have an -# IPv6 address calculated using the SLAAC algorithm. -#dhcp-range=1234::, ra-names - -# Do Router Advertisements, BUT NOT DHCP for this subnet. -# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.) -#dhcp-range=1234::, ra-only, 48h - -# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA -# so that clients can use SLAAC addresses as well as DHCP ones. -#dhcp-range=1234::2, 1234::500, slaac - -# Do Router Advertisements and stateless DHCP for this subnet. Clients will -# not get addresses from DHCP, but they will get other configuration information. -# They will use SLAAC for addresses. -#dhcp-range=1234::, ra-stateless - -# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses -# from DHCPv4 leases. -#dhcp-range=1234::, ra-stateless, ra-names - -# Do router advertisements for all subnets where we're doing DHCPv6 -# Unless overridden by ra-stateless, ra-names, et al, the router -# advertisements will have the M and O bits set, so that the clients -# get addresses and configuration from DHCPv6, and the A bit reset, so the -# clients don't use SLAAC addresses. -#enable-ra - -# Supply parameters for specified hosts using DHCP. There are lots -# of valid alternatives, so we will give examples of each. Note that -# IP addresses DO NOT have to be in the range given above, they just -# need to be on the same network. The order of the parameters in these -# do not matter, it's permissible to give name, address and MAC in any -# order. - -# Always allocate the host with Ethernet address 11:22:33:44:55:66 -# The IP address 192.168.0.60 -#dhcp-host=11:22:33:44:55:66,192.168.0.60 - -# Always set the name of the host with hardware address -# 11:22:33:44:55:66 to be "fred" -#dhcp-host=11:22:33:44:55:66,fred - -# Always give the host with Ethernet address 11:22:33:44:55:66 -# the name fred and IP address 192.168.0.60 and lease time 45 minutes -#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m - -# Give a host with Ethernet address 11:22:33:44:55:66 or -# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume -# that these two Ethernet interfaces will never be in use at the same -# time, and give the IP address to the second, even if it is already -# in use by the first. Useful for laptops with wired and wireless -# addresses. -#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60 - -# Give the machine which says its name is "bert" IP address -# 192.168.0.70 and an infinite lease -#dhcp-host=bert,192.168.0.70,infinite - -# Always give the host with client identifier 01:02:02:04 -# the IP address 192.168.0.60 -#dhcp-host=id:01:02:02:04,192.168.0.60 - -# Always give the InfiniBand interface with hardware address -# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the -# ip address 192.168.0.61. The client id is derived from the prefix -# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of -# hex digits of the hardware address. -#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61 - -# Always give the host with client identifier "marjorie" -# the IP address 192.168.0.60 -#dhcp-host=id:marjorie,192.168.0.60 - -# Enable the address given for "judge" in /etc/hosts -# to be given to a machine presenting the name "judge" when -# it asks for a DHCP lease. -#dhcp-host=judge - -# Never offer DHCP service to a machine whose Ethernet -# address is 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,ignore - -# Ignore any client-id presented by the machine with Ethernet -# address 11:22:33:44:55:66. This is useful to prevent a machine -# being treated differently when running under different OS's or -# between PXE boot and OS boot. -#dhcp-host=11:22:33:44:55:66,id:* - -# Send extra options which are tagged as "red" to -# the machine with Ethernet address 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,set:red - -# Send extra options which are tagged as "red" to -# any machine with Ethernet address starting 11:22:33: -#dhcp-host=11:22:33:*:*:*,set:red - -# Give a fixed IPv6 address and name to client with -# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2 -# Note the MAC addresses CANNOT be used to identify DHCPv6 clients. -# Note also that the [] around the IPv6 address are obligatory. -#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] - -# Ignore any clients which are not specified in dhcp-host lines -# or /etc/ethers. Equivalent to ISC "deny unknown-clients". -# This relies on the special "known" tag which is set when -# a host is matched. -#dhcp-ignore=tag:!known - -# Send extra options which are tagged as "red" to any machine whose -# DHCP vendorclass string includes the substring "Linux" -#dhcp-vendorclass=set:red,Linux - -# Send extra options which are tagged as "red" to any machine one -# of whose DHCP userclass strings includes the substring "accounts" -#dhcp-userclass=set:red,accounts - -# Send extra options which are tagged as "red" to any machine whose -# MAC address matches the pattern. -#dhcp-mac=set:red,00:60:8C:*:*:* - -# If this line is uncommented, dnsmasq will read /etc/ethers and act -# on the ethernet-address/IP pairs found there just as if they had -# been given as --dhcp-host options. Useful if you keep -# MAC-address/host mappings there for other purposes. -#read-ethers - -# Send options to hosts which ask for a DHCP lease. -# See RFC 2132 for details of available options. -# Common options can be given to dnsmasq by name: -# run "dnsmasq --help dhcp" to get a list. -# Note that all the common settings, such as netmask and -# broadcast address, DNS server and default route, are given -# sane defaults by dnsmasq. You very likely will not need -# any dhcp-options. If you use Windows clients and Samba, there -# are some options which are recommended, they are detailed at the -# end of this section. - -# Override the default route supplied by dnsmasq, which assumes the -# router is the same machine as the one running dnsmasq. -#dhcp-option=3,1.2.3.4 - -# Do the same thing, but using the option name -#dhcp-option=option:router,1.2.3.4 - -# Override the default route supplied by dnsmasq and send no default -# route at all. Note that this only works for the options sent by -# default (1, 3, 6, 12, 28) the same line will send a zero-length option -# for all other option numbers. -#dhcp-option=3 - -# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 -#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 - -# Send DHCPv6 option. Note [] around IPv6 addresses. -#dhcp-option=option6:dns-server,[1234::77],[1234::88] - -# Send DHCPv6 option for namservers as the machine running -# dnsmasq and another. -#dhcp-option=option6:dns-server,[::],[1234::88] - -# Ask client to poll for option changes every six hours. (RFC4242) -#dhcp-option=option6:information-refresh-time,6h - -# Set option 58 client renewal time (T1). Defaults to half of the -# lease time if not specified. (RFC2132) -#dhcp-option=option:T1,1m - -# Set option 59 rebinding time (T2). Defaults to 7/8 of the -# lease time if not specified. (RFC2132) -#dhcp-option=option:T2,2m - -# Set the NTP time server address to be the same machine as -# is running dnsmasq -#dhcp-option=42,0.0.0.0 - -# Set the NIS domain name to "welly" -#dhcp-option=40,welly - -# Set the default time-to-live to 50 -#dhcp-option=23,50 - -# Set the "all subnets are local" flag -#dhcp-option=27,1 - -# Send the etherboot magic flag and then etherboot options (a string). -#dhcp-option=128,e4:45:74:68:00:00 -#dhcp-option=129,NIC=eepro100 - -# Specify an option which will only be sent to the "red" network -# (see dhcp-range for the declaration of the "red" network) -# Note that the tag: part must precede the option: part. -#dhcp-option = tag:red, option:ntp-server, 192.168.1.1 - -# The following DHCP options set up dnsmasq in the same way as is specified -# for the ISC dhcpcd in -# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt -# adapted for a typical dnsmasq installation where the host running -# dnsmasq is also the host running samba. -# you may want to uncomment some or all of them if you use -# Windows clients and Samba. -#dhcp-option=19,0 # option ip-forwarding off -#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) -#dhcp-option=45,0.0.0.0 # netbios datagram distribution server -#dhcp-option=46,8 # netbios node type - -# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave. -#dhcp-option=252,"\n" - -# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client -# probably doesn't support this...... -#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com - -# Send RFC-3442 classless static routes (note the netmask encoding) -#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 - -# Send vendor-class specific options encapsulated in DHCP option 43. -# The meaning of the options is defined by the vendor-class so -# options are sent only when the client supplied vendor class -# matches the class given here. (A substring match is OK, so "MSFT" -# matches "MSFT" and "MSFT 5.0"). This example sets the -# mtftp address to 0.0.0.0 for PXEClients. -#dhcp-option=vendor:PXEClient,1,0.0.0.0 - -# Send microsoft-specific option to tell windows to release the DHCP lease -# when it shuts down. Note the "i" flag, to tell dnsmasq to send the -# value as a four-byte integer - that's what microsoft wants. See -# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true -#dhcp-option=vendor:MSFT,2,1i - -# Send the Encapsulated-vendor-class ID needed by some configurations of -# Etherboot to allow is to recognise the DHCP server. -#dhcp-option=vendor:Etherboot,60,"Etherboot" - -# Send options to PXELinux. Note that we need to send the options even -# though they don't appear in the parameter request list, so we need -# to use dhcp-option-force here. -# See http://syslinux.zytor.com/pxe.php#special for details. -# Magic number - needed before anything else is recognised -#dhcp-option-force=208,f1:00:74:7e -# Configuration file name -#dhcp-option-force=209,configs/common -# Path prefix -#dhcp-option-force=210,/tftpboot/pxelinux/files/ -# Reboot time. (Note 'i' to send 32-bit value) -#dhcp-option-force=211,30i - -# Set the boot filename for netboot/PXE. You will only need -# this if you want to boot machines over the network and you will need -# a TFTP server; either dnsmasq's built-in TFTP server or an -# external one. (See below for how to enable the TFTP server.) -#dhcp-boot=pxelinux.0 - -# The same as above, but use custom tftp-server instead machine running dnsmasq -#dhcp-boot=pxelinux,server.name,192.168.1.100 - -# Boot for iPXE. The idea is to send two different -# filenames, the first loads iPXE, and the second tells iPXE what to -# load. The dhcp-match sets the ipxe tag for requests from iPXE. -#dhcp-boot=undionly.kpxe -#dhcp-match=set:ipxe,175 # iPXE sends a 175 option. -#dhcp-boot=tag:ipxe,http://boot.ipxe.org/demo/boot.php - -# Encapsulated options for iPXE. All the options are -# encapsulated within option 175 -#dhcp-option=encap:175, 1, 5b # priority code -#dhcp-option=encap:175, 176, 1b # no-proxydhcp -#dhcp-option=encap:175, 177, string # bus-id -#dhcp-option=encap:175, 189, 1b # BIOS drive code -#dhcp-option=encap:175, 190, user # iSCSI username -#dhcp-option=encap:175, 191, pass # iSCSI password - -# Test for the architecture of a netboot client. PXE clients are -# supposed to send their architecture as option 93. (See RFC 4578) -#dhcp-match=peecees, option:client-arch, 0 #x86-32 -#dhcp-match=itanics, option:client-arch, 2 #IA64 -#dhcp-match=hammers, option:client-arch, 6 #x86-64 -#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64 - -# Do real PXE, rather than just booting a single file, this is an -# alternative to dhcp-boot. -#pxe-prompt="What system shall I netboot?" -# or with timeout before first available action is taken: -#pxe-prompt="Press F8 for menu.", 60 - -# Available boot services. for PXE. -#pxe-service=x86PC, "Boot from local disk" - -# Loads /pxelinux.0 from dnsmasq TFTP server. -#pxe-service=x86PC, "Install Linux", pxelinux - -# Loads /pxelinux.0 from TFTP server at 1.2.3.4. -# Beware this fails on old PXE ROMS. -#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4 - -# Use bootserver on network, found my multicast or broadcast. -#pxe-service=x86PC, "Install windows from RIS server", 1 - -# Use bootserver at a known IP address. -#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4 - -# If you have multicast-FTP available, -# information for that can be passed in a similar way using options 1 -# to 5. See page 19 of -# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf - - -# Enable dnsmasq's built-in TFTP server -#enable-tftp - -# Set the root directory for files available via FTP. -#tftp-root=/var/lib/misc/ftpd - -# Do not abort if the tftp-root is unavailable -#tftp-no-fail - -# Make the TFTP server more secure: with this set, only files owned by -# the user dnsmasq is running as will be send over the net. -#tftp-secure - -# This option stops dnsmasq from negotiating a larger blocksize for TFTP -# transfers. It will slow things down, but may rescue some broken TFTP -# clients. -#tftp-no-blocksize - -# Set the boot file name only when the "red" tag is set. -#dhcp-boot=tag:red,pxelinux.red-net - -# An example of dhcp-boot with an external TFTP server: the name and IP -# address of the server are given after the filename. -# Can fail with old PXE ROMS. Overridden by --pxe-service. -#dhcp-boot=/var/lib/misc/ftpd/pxelinux.0,boothost,192.168.0.3 - -# If there are multiple external tftp servers having a same name -# (using /etc/hosts) then that name can be specified as the -# tftp_servername (the third option to dhcp-boot) and in that -# case dnsmasq resolves this name and returns the resultant IP -# addresses in round robin fashion. This facility can be used to -# load balance the tftp load among a set of servers. -#dhcp-boot=/var/lib/misc/ftpd/pxelinux.0,boothost,tftp_server_name - -# Set the limit on DHCP leases, the default is 150 -#dhcp-lease-max=150 - -# The DHCP server needs somewhere on disk to keep its lease database. -# This defaults to a sane location, but if you want to change it, use -# the line below. -#dhcp-leasefile=/var/lib/misc/dnsmasq.leases - -# Set the DHCP server to authoritative mode. In this mode it will barge in -# and take over the lease for any client which broadcasts on the network, -# whether it has a record of the lease or not. This avoids long timeouts -# when a machine wakes up on a new network. DO NOT enable this if there's -# the slightest chance that you might end up accidentally configuring a DHCP -# server for your campus/company accidentally. The ISC server uses -# the same option, and this URL provides more information: -# http://www.isc.org/files/auth.html -#dhcp-authoritative - -# Set the DHCP server to enable DHCPv4 Rapid Commit Option per RFC 4039. -# In this mode it will respond to a DHCPDISCOVER message including a Rapid Commit -# option with a DHCPACK including a Rapid Commit option and fully committed address -# and configuration information. This must only be enabled if either the server is -# the only server for the subnet, or multiple servers are present and they each -# commit a binding for all clients. -#dhcp-rapid-commit - -# Run an executable when a DHCP lease is created or destroyed. -# The arguments sent to the script are "add" or "del", -# then the MAC address, the IP address and finally the hostname -# if there is one. -#dhcp-script=/bin/echo - -# Set the cachesize here. -#cache-size=150 - -# If you want to disable negative caching, uncomment this. -#no-negcache - -# Normally responses which come from /etc/hosts and the DHCP lease -# file have Time-To-Live set as zero, which conventionally means -# do not cache further. If you are happy to trade lower load on the -# server for potentially stale date, you can set a time-to-live (in -# seconds) here. -#local-ttl= - -# If you want dnsmasq to detect attempts by Verisign to send queries -# to unregistered .com and .net hosts to its sitefinder service and -# have dnsmasq instead return the correct NXDOMAIN response, uncomment -# this line. You can add similar lines to do the same for other -# registries which have implemented wildcard A records. -#bogus-nxdomain=64.94.110.11 - -# If you want to fix up DNS results from upstream servers, use the -# alias option. This only works for IPv4. -# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 -#alias=1.2.3.4,5.6.7.8 -# and this maps 1.2.3.x to 5.6.7.x -#alias=1.2.3.0,5.6.7.0,255.255.255.0 -# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40 -#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0 - -# Change these lines if you want dnsmasq to serve MX records. - -# Return an MX record named "maildomain.com" with target -# servermachine.com and preference 50 -#mx-host=maildomain.com,servermachine.com,50 - -# Set the default target for MX records created using the localmx option. -#mx-target=servermachine.com - -# Return an MX record pointing to the mx-target for all local -# machines. -#localmx - -# Return an MX record pointing to itself for all local machines. -#selfmx - -# Change the following lines if you want dnsmasq to serve SRV -# records. These are useful if you want to serve ldap requests for -# Active Directory and other windows-originated DNS requests. -# See RFC 2782. -# You may add multiple srv-host lines. -# The fields are ,,,, -# If the domain part if missing from the name (so that is just has the -# service and protocol sections) then the domain given by the domain= -# config option is used. (Note that expand-hosts does not need to be -# set for this to work.) - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 389 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 389 (using domain=) -#domain=example.com -#srv-host=_ldap._tcp,ldapserver.example.com,389 - -# Two SRV records for LDAP, each with different priorities -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 - -# A SRV record indicating that there is no LDAP server for the domain -# example.com -#srv-host=_ldap._tcp.example.com - -# The following line shows how to make dnsmasq serve an arbitrary PTR -# record. This is useful for DNS-SD. (Note that the -# domain-name expansion done for SRV records _does_not -# occur for PTR records.) -#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" - -# Change the following lines to enable dnsmasq to serve TXT records. -# These are used for things like SPF and zeroconf. (Note that the -# domain-name expansion done for SRV records _does_not -# occur for TXT records.) - -#Example SPF. -#txt-record=example.com,"v=spf1 a -all" - -#Example zeroconf -#txt-record=_http._tcp.example.com,name=value,paper=A4 - -# Provide an alias for a "local" DNS name. Note that this _only_ works -# for targets which are names from DHCP or /etc/hosts. Give host -# "bert" another name, bertrand -#cname=bertand,bert - -# For debugging purposes, log each DNS query as it passes through -# dnsmasq. -#log-queries - -# Log lots of extra information about DHCP transactions. -#log-dhcp - -# Include another lot of configuration options. -#conf-file=/etc/dnsmasq.more.conf -#conf-dir=/etc/dnsmasq.d - -# Include all the files in a directory except those ending in .bak -#conf-dir=/etc/dnsmasq.d,.bak - -# Include all files in a directory which end in .conf -#conf-dir=/etc/dnsmasq.d/,*.conf - -# If a DHCP client claims that its name is "wpad", ignore that. -# This fixes a security hole. see CERT Vulnerability VU#598349 -#dhcp-name-match=set:wpad-ignore,wpad -#dhcp-ignore-names=tag:wpad-ignore diff --git a/rules/dnsmasq.make b/rules/dnsmasq.make index 256b0f000..37039cf10 100644 --- a/rules/dnsmasq.make +++ b/rules/dnsmasq.make @@ -50,6 +50,21 @@ DNSMASQ_MAKE_OPT := \ COPTS='$(DNSMASQ_COPT)' \ "CFLAGS+=-Wall -Wextra -ggdb3 -O2" +# ---------------------------------------------------------------------------- +# Install +# ---------------------------------------------------------------------------- + +DNSMASQ_INSTALL_OPT := \ + $(DNSMASQ_MAKE_OPT) \ + install + +$(STATEDIR)/dnsmasq.install: + @$(call targetinfo) + @$(call world/install, DNSMASQ) + @install -vD -m 644 "$(DNSMASQ_DIR)/dnsmasq.conf.example" \ + "$(DNSMASQ_PKGDIR)/etc/dnsmasq.conf" + @$(call touch) + # ---------------------------------------------------------------------------- # Target-Install # ---------------------------------------------------------------------------- -- 2.25.1 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de