* [ptxdist] [PATCH] u-boot: Add support for u-boot.stm32 binary
@ 2019-12-12 16:30 Guillermo Rodríguez
2019-12-13 7:09 ` Alexander Dahl
2019-12-13 8:26 ` [ptxdist] [PATCH v2] " Guillermo Rodríguez
0 siblings, 2 replies; 3+ messages in thread
From: Guillermo Rodríguez @ 2019-12-12 16:30 UTC (permalink / raw)
To: ptxdist; +Cc: Guillermo Rodríguez
Adds support for copying u-boot.stm32 (u-boot with STM32 image header)
to the platform image directory. This is used by STM32MP1 SoCs.
Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com>
---
platforms/u-boot.in | 7 +++++++
rules/u-boot.make | 5 ++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/platforms/u-boot.in b/platforms/u-boot.in
index aab9c57a3..1d682d1c3 100644
--- a/platforms/u-boot.in
+++ b/platforms/u-boot.in
@@ -220,5 +220,12 @@ config U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
Installing the U-Boot binary which contains as well the SPL and PBL.
Say yes if you are building for Layerscape SoCs
+config U_BOOT_INSTALL_U_BOOT_STM32
+ prompt "install u-boot.stm32"
+ bool
+ help
+ Installing the U-Boot image with stm32 header (u-boot.stm32) into platform
+ image directory. Say yes if you are building for STM32MP1 SOC.
+
endif
diff --git a/rules/u-boot.make b/rules/u-boot.make
index 04d801fc6..57d69e15f 100644
--- a/rules/u-boot.make
+++ b/rules/u-boot.make
@@ -167,6 +167,9 @@ ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
@install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-with-spl-pbl.bin \
$(IMAGEDIR)/u-boot-with-spl-pbl.bin
endif
+ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_STM32
+ @install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot.stm32 $(IMAGEDIR)/u-boot.stm32
+endif
ifndef PTXCONF_U_BOOT_ENV_IMAGE_NONE
@install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-env.img \
$(IMAGEDIR)/u-boot-env.img
@@ -197,7 +200,7 @@ $(STATEDIR)/u-boot.clean:
@rm -vf $(IMAGEDIR)/u-boot.img $(IMAGEDIR)/SPL $(IMAGEDIR)/MLO
@rm -vf $(IMAGEDIR)/u-boot.imx $(IMAGEDIR)/u-boot-dtb.imx
@rm -vf $(IMAGEDIR)/u-boot-env.img
- @rm -vf $(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin
+ @rm -vf $(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin $(IMAGEDIR)/u-boot.stm32
# ----------------------------------------------------------------------------
# oldconfig / menuconfig
--
2.21.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ptxdist] [PATCH] u-boot: Add support for u-boot.stm32 binary
2019-12-12 16:30 [ptxdist] [PATCH] u-boot: Add support for u-boot.stm32 binary Guillermo Rodríguez
@ 2019-12-13 7:09 ` Alexander Dahl
2019-12-13 8:26 ` [ptxdist] [PATCH v2] " Guillermo Rodríguez
1 sibling, 0 replies; 3+ messages in thread
From: Alexander Dahl @ 2019-12-13 7:09 UTC (permalink / raw)
To: ptxdist; +Cc: Guillermo Rodríguez
Hello Guillermo,
Am Donnerstag, 12. Dezember 2019, 17:30:58 CET schrieb Guillermo Rodríguez:
> Adds support for copying u-boot.stm32 (u-boot with STM32 image header)
> to the platform image directory. This is used by STM32MP1 SoCs.
>
> Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com>
> ---
> platforms/u-boot.in | 7 +++++++
> rules/u-boot.make | 5 ++++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/platforms/u-boot.in b/platforms/u-boot.in
> index aab9c57a3..1d682d1c3 100644
> --- a/platforms/u-boot.in
> +++ b/platforms/u-boot.in
> @@ -220,5 +220,12 @@ config U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
> Installing the U-Boot binary which contains as well the SPL and PBL.
> Say yes if you are building for Layerscape SoCs
>
> +config U_BOOT_INSTALL_U_BOOT_STM32
> + prompt "install u-boot.stm32"
> + bool
> + help
> + Installing the U-Boot image with stm32 header (u-boot.stm32) into
> platform + image directory. Say yes if you are building for STM32MP1 SOC.
> +
> endif
Trailing whitespace and lines longer than 80 chars.
>
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index 04d801fc6..57d69e15f 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -167,6 +167,9 @@ ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
> @install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-with-spl-pbl.bin \
> $(IMAGEDIR)/u-boot-with-spl-pbl.bin
> endif
> +ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_STM32
> + @install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot.stm32
> $(IMAGEDIR)/u-boot.stm32 +endif
> ifndef PTXCONF_U_BOOT_ENV_IMAGE_NONE
> @install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-env.img \
> $(IMAGEDIR)/u-boot-env.img
> @@ -197,7 +200,7 @@ $(STATEDIR)/u-boot.clean:
> @rm -vf $(IMAGEDIR)/u-boot.img $(IMAGEDIR)/SPL $(IMAGEDIR)/MLO
> @rm -vf $(IMAGEDIR)/u-boot.imx $(IMAGEDIR)/u-boot-dtb.imx
> @rm -vf $(IMAGEDIR)/u-boot-env.img
> - @rm -vf $(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin
> + @rm -vf $(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin
> $(IMAGEDIR)/u-boot.stm32
Also long line here. Otherwise fine, so:
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Greets
Alex
>
> #
> ---------------------------------------------------------------------------
> - # oldconfig / menuconfig
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ptxdist] [PATCH v2] u-boot: Add support for u-boot.stm32 binary
2019-12-12 16:30 [ptxdist] [PATCH] u-boot: Add support for u-boot.stm32 binary Guillermo Rodríguez
2019-12-13 7:09 ` Alexander Dahl
@ 2019-12-13 8:26 ` Guillermo Rodríguez
1 sibling, 0 replies; 3+ messages in thread
From: Guillermo Rodríguez @ 2019-12-13 8:26 UTC (permalink / raw)
To: ptxdist; +Cc: Alexander Dahl, Guillermo Rodríguez
Adds support for copying u-boot.stm32 (u-boot with STM32 image header)
to the platform image directory. This is used by STM32MP1 SoCs.
Signed-off-by: Guillermo Rodriguez <guille.rodriguez@gmail.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
---
v2: Formatting/whitespace changes
platforms/u-boot.in | 8 ++++++++
rules/u-boot.make | 4 ++++
2 files changed, 12 insertions(+)
diff --git a/platforms/u-boot.in b/platforms/u-boot.in
index aab9c57a3..50fb008a3 100644
--- a/platforms/u-boot.in
+++ b/platforms/u-boot.in
@@ -220,5 +220,13 @@ config U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
Installing the U-Boot binary which contains as well the SPL and PBL.
Say yes if you are building for Layerscape SoCs
+config U_BOOT_INSTALL_U_BOOT_STM32
+ prompt "install u-boot.stm32"
+ bool
+ help
+ Installing the U-Boot image with stm32 header (u-boot.stm32) into
+ platform image directory. Say yes if you are building for STM32MP1
+ SOCs.
+
endif
diff --git a/rules/u-boot.make b/rules/u-boot.make
index 04d801fc6..0c6bccc71 100644
--- a/rules/u-boot.make
+++ b/rules/u-boot.make
@@ -167,6 +167,9 @@ ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_WITH_SPL_PBL
@install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-with-spl-pbl.bin \
$(IMAGEDIR)/u-boot-with-spl-pbl.bin
endif
+ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_STM32
+ @install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot.stm32 $(IMAGEDIR)/u-boot.stm32
+endif
ifndef PTXCONF_U_BOOT_ENV_IMAGE_NONE
@install -v -D -m644 $(U_BOOT_BUILD_DIR)/u-boot-env.img \
$(IMAGEDIR)/u-boot-env.img
@@ -198,6 +201,7 @@ $(STATEDIR)/u-boot.clean:
@rm -vf $(IMAGEDIR)/u-boot.imx $(IMAGEDIR)/u-boot-dtb.imx
@rm -vf $(IMAGEDIR)/u-boot-env.img
@rm -vf $(IMAGEDIR)/u-boot-dtb.bin $(IMAGEDIR)/u-boot-with-spl-pbl.bin
+ @rm -vf $(IMAGEDIR)/u-boot.stm32
# ----------------------------------------------------------------------------
# oldconfig / menuconfig
--
2.21.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-12-13 8:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-12 16:30 [ptxdist] [PATCH] u-boot: Add support for u-boot.stm32 binary Guillermo Rodríguez
2019-12-13 7:09 ` Alexander Dahl
2019-12-13 8:26 ` [ptxdist] [PATCH v2] " Guillermo Rodríguez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox