From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] blktrace: add new package
Date: Tue, 25 Jun 2019 12:24:08 +0200 [thread overview]
Message-ID: <20190625102408.cr4skykc4rubjzdb@pengutronix.de> (raw)
In-Reply-To: <20190625101436.29088-1-jlu@pengutronix.de>
On Tue, Jun 25, 2019 at 12:14:36PM +0200, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
> rules/blktrace.in | 8 +++++++
> rules/blktrace.make | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 74 insertions(+)
> create mode 100644 rules/blktrace.in
> create mode 100644 rules/blktrace.make
>
> diff --git a/rules/blktrace.in b/rules/blktrace.in
> new file mode 100644
> index 000000000000..69335e2e4288
> --- /dev/null
> +++ b/rules/blktrace.in
> @@ -0,0 +1,8 @@
> +## SECTION=disk_and_file
> +
> +config BLKTRACE
> + tristate
> + prompt "blktrace"
> + help
> + Collects and parses block IO traces using the CONFIG_BLK_DEV_IO_TRACE
> + kernel feature.
> diff --git a/rules/blktrace.make b/rules/blktrace.make
> new file mode 100644
> index 000000000000..2b41afdf2c7c
> --- /dev/null
> +++ b/rules/blktrace.make
> @@ -0,0 +1,66 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2019 by Jan Luebbe <jlu@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BLKTRACE) += blktrace
> +
> +#
> +# Paths and names
> +#
> +BLKTRACE_VERSION := 1.2.0
> +BLKTRACE_MD5 := b9a80b7cc0a50f7a96d34c570ab8224d
> +BLKTRACE := blktrace-$(BLKTRACE_VERSION)
> +BLKTRACE_SUFFIX := tar.bz2
> +BLKTRACE_URL := http://brick.kernel.dk/snaps/$(BLKTRACE).$(BLKTRACE_SUFFIX)
> +BLKTRACE_SOURCE := $(SRCDIR)/$(BLKTRACE).$(BLKTRACE_SUFFIX)
> +BLKTRACE_DIR := $(BUILDDIR)/$(BLKTRACE)
> +BLKTRACE_LICENSE := GPL-2.0-only
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +BLKTRACE_CONF_TOOL := NO
> +BLKTRACE_MAKE_PAR := NO
> +BLKTRACE_MAKE_OPT := $(CROSS_ENV) blktrace blkparse
BLKTRACE_MAKE_OPT := \
$(CROSS_ENV) \
prefix=/usr \
ALL="blktrace blkparse"
BLKTRACE_INSTALL_OPT := \
$(BLKTRACE_MAKE_OPT) \
install
Should work. Then use the default install stage and '-' as source in
targetinstall.
Michael
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/blktrace.install:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/blktrace.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, blktrace)
> + @$(call install_fixup, blktrace,PRIORITY,optional)
> + @$(call install_fixup, blktrace,SECTION,base)
> + @$(call install_fixup, blktrace,AUTHOR,"Jan Luebbe <jlu@pengutronix.de>")
> + @$(call install_fixup, blktrace,DESCRIPTION,missing)
> +
> + @$(call install_copy, blktrace, 0, 0, 0755, $(BLKTRACE_DIR)/blkparse, \
> + /usr/bin/blkparse)
> + @$(call install_copy, blktrace, 0, 0, 0755, $(BLKTRACE_DIR)/blktrace, \
> + /usr/sbin/blktrace)
> +
> + @$(call install_finish, blktrace)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.11.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
prev parent reply other threads:[~2019-06-25 10:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 10:14 Jan Luebbe
2019-06-25 10:24 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625102408.cr4skykc4rubjzdb@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox