From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 2/2] libiio: Add options for installing test binaries
Date: Wed, 16 Jan 2019 16:32:49 +0100 [thread overview]
Message-ID: <20190116153249.zyq5eub2lqfkvwph@pengutronix.de> (raw)
In-Reply-To: <20190114095056.GB11361@lenoch>
On Mon, Jan 14, 2019 at 10:50:56AM +0100, Ladislav Michl wrote:
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
> rules/libiio.in | 29 +++++++++++++++++++++++++++--
> rules/libiio.make | 20 ++++++++++++++++++--
> 2 files changed, 45 insertions(+), 4 deletions(-)
>
> diff --git a/rules/libiio.in b/rules/libiio.in
> index c9e94c866..b1d8f9038 100644
> --- a/rules/libiio.in
> +++ b/rules/libiio.in
> @@ -1,9 +1,34 @@
> ## SECTION=system_libraries
>
> -config LIBIIO
> +menuconfig LIBIIO
> tristate
> - prompt "libiio"
> + prompt "libiio "
> select HOST_CMAKE
> help
> A cross platform library for interfacing with local and
> remote Linux IIO devices.
> +
> +if LIBIIO
> +
> +config LIBIIO_ADI_XFLOW_CHECK
> + bool "install iio_adi_xflow_check"
> +
> +config LIBIIO_ATTR
> + bool "install iio_attr"
> +
> +config LIBIIO_GENXML
> + bool "install iio_genxml"
> +
> +config LIBIIO_INFO
> + bool "install iio_info"
> +
> +config LIBIIO_READDEV
> + bool "install iio_readdev"
> +
> +config LIBIIO_REG
> + bool "install iio_reg"
> +
> +config LIBIIO_WRITEDEV
> + bool "install iio_writedev"
Hmmm, how big are these tools? May just one option would be ok too?
Michael
> +
> +endif
> diff --git a/rules/libiio.make b/rules/libiio.make
> index c997ed4bd..2a621eae7 100644
> --- a/rules/libiio.make
> +++ b/rules/libiio.make
> @@ -29,10 +29,23 @@ LIBIIO_LICENSE := LGPL-2.1-only
> # Prepare
> # ----------------------------------------------------------------------------
>
> +LIBIIO_TESTS-y :=
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_ADI_XFLOW_CHECK) += iio_adi_xflow_check
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_ATTR) += iio_attr
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_GENXML) += iio_genxml
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_INFO) += iio_info
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_READDEV) += iio_readdev
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_REG) += iio_reg
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_WRITEDEV) += iio_writedev
> +
> +ifneq ($(strip $(LIBIIO_TESTS-y)),)
> +LIBIIO_TESTS := y
> +endif
> +
> LIBIIO_CONF_TOOL := cmake
> LIBIIO_CONF_OPT := \
> $(CROSS_CMAKE_USR) \
> - -DENABLE_IPV6=$(call ptx/ifdef, PTXCONF_GLOBAL_IPV6,ON,OFF) \
> + -DENABLE_IPV6=$(call ptx/onoff, PTXCONF_GLOBAL_IPV6) \
> -DWITH_DOC=OFF \
> -DWITH_IIOD=OFF \
> -DWITH_LOCAL_BACKEND=ON \
> @@ -44,7 +57,7 @@ LIBIIO_CONF_OPT := \
> -DWITH_MATLAB_BINDINGS_API=OFF \
> -DPYTHON_BINDINGS=OFF \
> -DCSHARP_BINDINGS=OFF \
> - -DWITH_TESTS=OFF
> + -DWITH_TESTS=$(call ptx/onoff, LIBIIO_TESTS)
>
> # ----------------------------------------------------------------------------
> # Target-Install
> @@ -61,6 +74,9 @@ $(STATEDIR)/libiio.targetinstall:
>
> @$(call install_lib, libiio, 0, 0, 0644, libiio)
>
> + @$(foreach bin, $(LIBIIO_TESTS-y), \
> + $(call install_copy, libiio, 0, 0, 0755, -, /usr/bin/$(bin));)
> +
> @$(call install_finish, libiio)
>
> @$(call touch)
> --
> 2.20.1
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2019-01-16 15:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 9:50 [ptxdist] [PATCH 1/2] libiio: version bump 0.16 -> 0.17 Ladislav Michl
2019-01-14 9:50 ` [ptxdist] [PATCH 2/2] libiio: Add options for installing test binaries Ladislav Michl
2019-01-16 15:32 ` Michael Olbrich [this message]
2019-01-16 21:32 ` Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116153249.zyq5eub2lqfkvwph@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox