From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v2] libiio: new package
Date: Wed, 16 Jan 2019 16:30:45 +0100 [thread overview]
Message-ID: <20190116153045.yrye6eqcapnisdwy@pengutronix.de> (raw)
In-Reply-To: <20190114092818.GB9667@lenoch>
On Mon, Jan 14, 2019 at 10:28:18AM +0100, Ladislav Michl wrote:
> Only local backend is supported for now.
>
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
> Changes:
> -v2: bump version to 0.17, add options to install test binaries
The other version was already applied to master before you sent your mail.
Can you create a version bump for this?
Michael
>
> rules/libiio.in | 34 +++++++++++++++++++
> rules/libiio.make | 84 +++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 118 insertions(+)
> create mode 100644 rules/libiio.in
> create mode 100644 rules/libiio.make
>
> diff --git a/rules/libiio.in b/rules/libiio.in
> new file mode 100644
> index 000000000..b1d8f9038
> --- /dev/null
> +++ b/rules/libiio.in
> @@ -0,0 +1,34 @@
> +## SECTION=system_libraries
> +
> +menuconfig LIBIIO
> + tristate
> + prompt "libiio "
> + select HOST_CMAKE
> + help
> + A cross platform library for interfacing with local and
> + remote Linux IIO devices.
> +
> +if LIBIIO
> +
> +config LIBIIO_ADI_XFLOW_CHECK
> + bool "install iio_adi_xflow_check"
> +
> +config LIBIIO_ATTR
> + bool "install iio_attr"
> +
> +config LIBIIO_GENXML
> + bool "install iio_genxml"
> +
> +config LIBIIO_INFO
> + bool "install iio_info"
> +
> +config LIBIIO_READDEV
> + bool "install iio_readdev"
> +
> +config LIBIIO_REG
> + bool "install iio_reg"
> +
> +config LIBIIO_WRITEDEV
> + bool "install iio_writedev"
> +
> +endif
> diff --git a/rules/libiio.make b/rules/libiio.make
> new file mode 100644
> index 000000000..2a621eae7
> --- /dev/null
> +++ b/rules/libiio.make
> @@ -0,0 +1,84 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2019 by Ladislav Michl <ladis@linux-mips.org>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_LIBIIO) += libiio
> +
> +#
> +# Paths and names
> +#
> +LIBIIO_VERSION := 0.17
> +LIBIIO_MD5 := 05a45aad2d50ef8c8a015d0caaf3802d
> +LIBIIO := libiio-$(LIBIIO_VERSION)
> +LIBIIO_SUFFIX := tar.gz
> +LIBIIO_URL := https://github.com/analogdevicesinc/libiio/archive/v$(LIBIIO_VERSION).$(LIBIIO_SUFFIX)
> +LIBIIO_SOURCE := $(SRCDIR)/$(LIBIIO).$(LIBIIO_SUFFIX)
> +LIBIIO_DIR := $(BUILDDIR)/$(LIBIIO)
> +LIBIIO_LICENSE := LGPL-2.1-only
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +LIBIIO_TESTS-y :=
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_ADI_XFLOW_CHECK) += iio_adi_xflow_check
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_ATTR) += iio_attr
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_GENXML) += iio_genxml
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_INFO) += iio_info
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_READDEV) += iio_readdev
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_REG) += iio_reg
> +LIBIIO_TESTS-$(PTXCONF_LIBIIO_WRITEDEV) += iio_writedev
> +
> +ifneq ($(strip $(LIBIIO_TESTS-y)),)
> +LIBIIO_TESTS := y
> +endif
> +
> +LIBIIO_CONF_TOOL := cmake
> +LIBIIO_CONF_OPT := \
> + $(CROSS_CMAKE_USR) \
> + -DENABLE_IPV6=$(call ptx/onoff, PTXCONF_GLOBAL_IPV6) \
> + -DWITH_DOC=OFF \
> + -DWITH_IIOD=OFF \
> + -DWITH_LOCAL_BACKEND=ON \
> + -DWITH_LOCAL_CONFIG=OFF \
> + -DWITH_XML_BACKEND=OFF \
> + -DWITH_USB_BACKEND=OFF \
> + -DWITH_SERIAL_BACKEND=OFF \
> + -DWITH_NETWORK_BACKEND=OFF \
> + -DWITH_MATLAB_BINDINGS_API=OFF \
> + -DPYTHON_BINDINGS=OFF \
> + -DCSHARP_BINDINGS=OFF \
> + -DWITH_TESTS=$(call ptx/onoff, LIBIIO_TESTS)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/libiio.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, libiio)
> + @$(call install_fixup, libiio, PRIORITY, optional)
> + @$(call install_fixup, libiio, SECTION, base)
> + @$(call install_fixup, libiio, AUTHOR, "Ladislav Michl <ladis@linux-mips.org>")
> + @$(call install_fixup, libiio, DESCRIPTION, missing)
> +
> + @$(call install_lib, libiio, 0, 0, 0644, libiio)
> +
> + @$(foreach bin, $(LIBIIO_TESTS-y), \
> + $(call install_copy, libiio, 0, 0, 0755, -, /usr/bin/$(bin));)
> +
> + @$(call install_finish, libiio)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.20.1
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2019-01-16 15:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 9:28 Ladislav Michl
2019-01-16 15:30 ` Michael Olbrich [this message]
2019-01-16 15:32 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116153045.yrye6eqcapnisdwy@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox