[ptxdist] [PATCH] hostapd: version bump 2.6 -> 2.7

["Ulrich Ölmann" <u.oelmann@pengutronix.de>]

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
---
 config/hostapd/defconfig | 36 +++++++++++++++++++++++++++++++++---
 rules/hostapd.make       |  4 ++--
 2 files changed, 35 insertions(+), 5 deletions(-)

diff --git a/config/hostapd/defconfig b/config/hostapd/defconfig
index 28db7f31c04a..878daace0bea 100644
--- a/config/hostapd/defconfig
+++ b/config/hostapd/defconfig
@@ -50,9 +50,6 @@ CONFIG_IAPP=y
 # WPA2/IEEE 802.11i RSN pre-authentication
 CONFIG_RSN_PREAUTH=y
 
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
 # IEEE 802.11w (management frame protection)
 CONFIG_IEEE80211W=y
 
@@ -157,6 +154,12 @@ CONFIG_WNM=y
 # IEEE 802.11ac (Very High Throughput) support
 CONFIG_IEEE80211AC=y
 
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
@@ -166,6 +169,9 @@ CONFIG_IEEE80211AC=y
 # Disabled by default.
 CONFIG_DEBUG_FILE=y
 
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+
 # Add support for sending all debug messages (regardless of debug verbosity)
 # to the Linux kernel tracing facility. This helps debug the entire stack by
 # making it easy to record everything happening from the driver up into the
@@ -256,6 +262,7 @@ CONFIG_VLAN_NETLINK=y
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
 # none = Empty template
 CONFIG_TLS=openssl
 
@@ -268,6 +275,10 @@ CONFIG_TLSV11=y
 # can be enabled to enable use of stronger crypto algorithms.
 CONFIG_TLSV12=y
 
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
@@ -343,3 +354,22 @@ CONFIG_ACS=y
 # a client, from which a signature can be produced which can identify the model
 # of client device like "Nexus 6P" or "iPhone 5s".
 #CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+# Note: This is an experimental and not yet complete implementation. This
+# should not be enabled for production use.
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
diff --git a/rules/hostapd.make b/rules/hostapd.make
index 340b764c202b..2ca5f642a125 100644
--- a/rules/hostapd.make
+++ b/rules/hostapd.make
@@ -18,8 +18,8 @@ PACKAGES-$(PTXCONF_HOSTAPD) += hostapd
 # Paths and names
 #
 HOSTAPD_NAME	:= hostapd
-HOSTAPD_VERSION	:= 2.6
-HOSTAPD_MD5	:= eaa56dce9bd8f1d195eb62596eab34c7
+HOSTAPD_VERSION	:= 2.7
+HOSTAPD_MD5	:= 8d3799f3a3c247cff47d41503698721b
 HOSTAPD		:= $(HOSTAPD_NAME)-$(HOSTAPD_VERSION)
 HOSTAPD_SUFFIX	:= tar.gz
 HOSTAPD_URL	:= http://w1.fi/releases/$(HOSTAPD).$(HOSTAPD_SUFFIX)
-- 
2.19.1


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de