From: Michael Grzeschik <mgr@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] libkcapi: add new rule
Date: Mon, 26 Nov 2018 08:42:20 +0100 [thread overview]
Message-ID: <20181126074220.m44q4uz5xh3e2yk4@pengutronix.de> (raw)
In-Reply-To: <20181126052546.b3vofaw6hk3ri3gj@pengutronix.de>
[-- Attachment #1.1: Type: text/plain, Size: 9206 bytes --]
On Mon, Nov 26, 2018 at 06:25:46AM +0100, Michael Olbrich wrote:
> On Fri, Nov 23, 2018 at 06:12:26PM +0100, Michael Grzeschik wrote:
> > Add the libkcapi package and include options to enable tests and install
> > AF_ALG based hashing functins.
> >
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>
> This fails to build because configure is missing.
I will add the missing autogen.sh link in the patches dir.
> > ---
> > rules/libkcapi.in | 58 +++++++++++++++++++++
> > rules/libkcapi.make | 121 ++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 179 insertions(+)
> > create mode 100644 rules/libkcapi.in
> > create mode 100644 rules/libkcapi.make
> >
> > diff --git a/rules/libkcapi.in b/rules/libkcapi.in
> > new file mode 100644
> > index 000000000..c7474d61e
> > --- /dev/null
> > +++ b/rules/libkcapi.in
> > @@ -0,0 +1,58 @@
> > +## SECTION=project_specific
> > +
> > +menuconfig LIBKCAPI
> > + tristate
> > + prompt "libkcapi"
> > + help
> > + The Linux kernel exports a Netlink interface of type AF_ALG to
> > + allow user space to utilize the kernel crypto API.
> > +
> > +if LIBKCAPI
> > +
> > +config LIBKCAPI_MD5SUM
> > + bool
> > + depends on !COREUTILS_MD5SUM
> > + depends on !BUSYBOX_MD5SUM
> > + prompt "md5sum"
> > + help
> > + support md5sum cmdline util
> > +
> > +config LIBKCAPI_SHA1SUM
> > + bool
> > + depends on !COREUTILS_SHA1SUM
> > + depends on !BUSYBOX_SHA1SUM
> > + prompt "sha1sum"
> > + help
> > + support sha1sum cmdline util
> > +
> > +config LIBKCAPI_SHA256SUM
> > + bool
> > + depends on !COREUTILS_SHA256SUM
> > + depends on !BUSYBOX_SHA256SUM
> > + prompt "sha256sum"
> > + help
> > + support sha256sum cmdline util
> > +
> > +config LIBKCAPI_SHA384SUM
> > + bool
> > + depends on !COREUTILS_SHA384SUM
> > + prompt "sha384sum"
> > + help
> > + support sha384sum cmdline util
> > +
> > +config LIBKCAPI_SHA512SUM
> > + bool
> > + depends on !COREUTILS_SHA512SUM
> > + depends on !BUSYBOX_SHA512SUM
> > + prompt "sha512sum"
> > + help
> > + support sha512sum cmdline util
> > +
> > +config LIBKCAPI_TEST
> > + bool
> > + depends on OPENSSL_BIN
> > + prompt "test"
> > + help
> > + support kcapi tests
> > +
> > +endif
> > diff --git a/rules/libkcapi.make b/rules/libkcapi.make
> > new file mode 100644
> > index 000000000..d8a8b88d4
> > --- /dev/null
> > +++ b/rules/libkcapi.make
> > @@ -0,0 +1,121 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2018 by Michael Grzeschik <mgr@pengutronix.de>
> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_LIBKCAPI) += libkcapi
> > +
> > +#
> > +# Paths and names
> > +#
> > +LIBKCAPI_VERSION := 1.1.3
> > +LIBKCAPI_MD5 := 480b78de9fe7f3f64ca7622396499e5f
> > +LIBKCAPI := libkcapi-$(LIBKCAPI_VERSION)
> > +LIBKCAPI_SUFFIX := tar.xz
> > +LIBKCAPI_URL := http://www.chronox.de/libkcapi//$(LIBKCAPI).$(LIBKCAPI_SUFFIX)
> > +LIBKCAPI_SOURCE := $(SRCDIR)/$(LIBKCAPI).$(LIBKCAPI_SUFFIX)
> > +LIBKCAPI_DIR := $(BUILDDIR)/$(LIBKCAPI)
> > +LIBKCAPI_LICENSE := GPLv2+
> > +
> > +# ----------------------------------------------------------------------------
> > +# Prepare
> > +# ----------------------------------------------------------------------------
> > +
> > +LIBKCAPI_CONF_ENV := \
> > + $(CROSS_ENV) \
> > + ac_cv_path_XMLTO=
> > +
> > +#
> > +# autoconf
> > +#
> > +LIBKCAPI_CONF_TOOL := autoconf
> > +LIBKCAPI_CONF_OPT := \
> > + $(CROSS_AUTOCONF_USR) \
> > + --enable-kcapi-hasher \
> > + --enable-kcapi-rngapp \
> > + --enable-kcapi-speed \
> > + --$(call ptx/endis, PTXCONF_LIBKCAPI_TEST)-kcapi-test \
> > + --enable-kcapi-encapp \
> > + --enable-kcapi-dgstapp \
> > + --disable-lib-asym \
> > + --disable-lib-kpp
> > +
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/libkcapi.targetinstall:
> > + @$(call targetinfo)
> > +
> > + @$(call install_init, libkcapi)
> > + @$(call install_fixup, libkcapi,PRIORITY,optional)
> > + @$(call install_fixup, libkcapi,SECTION,base)
> > + @$(call install_fixup, libkcapi,AUTHOR,"Michael Grzeschik <mgr@pengutronix.de>")
> > + @$(call install_fixup, libkcapi,DESCRIPTION,missing)
> > +
> > + @$(call install_lib, libkcapi, 0, 0, 0644, libkcapi);
> > +
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/bin/kcapi-rng);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/bin/kcapi-speed);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/bin/kcapi-enc);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/bin/kcapi-dgst);
> > +
> > + @$(call install_copy, libkcapi, 0, 0, 0755, $(LIBKCAPI_PKGDIR)/usr/bin/fipscheck, /usr/bin/kcapi-hasher);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/fipscheck);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/fipshmac);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha1hmac);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha224hmac);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha256hmac);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha384hmac);
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha512hmac);
> > +
> > +#ifdef PTXCONF_LIBKCAPI_MD5SUM
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/md5sum);
> > +#endif
> > +
> > +#ifdef PTXCONF_LIBKCAPI_SHA1SUM
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha1sum);
> > +#endif
> > +
> > +#ifdef PTXCONF_LIBKCAPI_SHA256SUM
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha256sum);
> > +#endif
> > +
> > +#ifdef PTXCONF_LIBKCAPI_SHA384SUM
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha384sum);
> > +#endif
> > +
> > +#ifdef PTXCONF_LIBKCAPI_SHA512SUM
> > + @$(call install_link, libkcapi, /usr/bin/kcapi-hasher, /usr/bin/sha512sum);
> > +#endif
> > +
> > +#ifdef PTXCONF_LIBKCAPI_TEST
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-enc-test-large);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-convenience);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/libtest.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-enc-test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-enc-test-large.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-dgst-test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-convenience.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/kcapi-fuzz-test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/hasher-test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/compile-test.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/virttest.sh);
> > + @$(call install_copy, libkcapi, 0, 0, 0755, -, /usr/libexec/libkcapi/test-invocation.sh);
>
> Maybe use install_tree here? We just want to install any existing tests
> here. Nobody is going to check if all tests are installed in new versions
> unless it breaks.
Good point. I will use install_tree.
> Michael
>
> > +#endif
> > +
> > + @$(call install_finish, libkcapi)
> > +
> > + @$(call touch)
> > +
> > +# vim: syntax=make
> > --
> > 2.19.1
> >
> >
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 91 bytes --]
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-11-26 7:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-23 17:12 Michael Grzeschik
2018-11-26 5:25 ` Michael Olbrich
2018-11-26 7:42 ` Michael Grzeschik [this message]
2018-11-26 12:43 ` [ptxdist] [PATCH v2] " Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181126074220.m44q4uz5xh3e2yk4@pengutronix.de \
--to=mgr@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox