From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 3/3] pulseaudio: version bump 8.0 -> 12.2
Date: Thu, 22 Nov 2018 07:24:12 +0100 [thread overview]
Message-ID: <20181122062412.dl2u453rs22ujpzx@pengutronix.de> (raw)
In-Reply-To: <20181105150117.13436-3-l.stach@pengutronix.de>
On Mon, Nov 05, 2018 at 04:01:17PM +0100, Lucas Stach wrote:
> - version bump
> - add glib support
> - add speex resampler support
> - add bluetooth support
>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> rules/pulseaudio.in | 25 +++++++++++++++++++++++--
> rules/pulseaudio.make | 41 ++++++++++++++++++++++++++++++++---------
> 2 files changed, 55 insertions(+), 11 deletions(-)
>
> diff --git a/rules/pulseaudio.in b/rules/pulseaudio.in
> index f59ad470e6df..13ec74b87cd5 100644
> --- a/rules/pulseaudio.in
> +++ b/rules/pulseaudio.in
> @@ -8,12 +8,16 @@ config PULSEAUDIO
> select LIBC_PTHREAD
> select ALSA_LIB
> select ALSA_LIB_MIXER
> - select JSON_C
> select LIBCAP
> select LIBLTDL
> select LIBSNDFILE
> select ORC
> - select SYSTEMD if PULSEAUDIO_SYSTEMD
> + select SYSTEMD if PULSEAUDIO_SYSTEMD
> + select GLIB if PULSEAUDIO_GLIB
> + select SBC if PULSEAUDIO_BLUETOOTH
> + select DBUS if PULSEAUDIO_BLUETOOTH
> + select SPEEXDSP if PULSEAUDIO_SPEEX
> + select SPEEXDSP_FLOAT_API if PULSEAUDIO_SPEEX
> select UDEV
> select UDEV_LIBUDEV
> prompt "pulseaudio"
> @@ -29,4 +33,21 @@ config PULSEAUDIO_SYSTEMD
> bool
> default INITMETHOD_SYSTEMD
>
> +config PULSEAUDIO_BLUETOOTH
> + bool
> + prompt "enable bluetooth support"
> +
> +config PULSEAUDIO_GLIB
> + bool
> + prompt "enable glib support"
> +
> +config PULSEAUDIO_SPEEX
> + bool
> + default y
> + prompt "enable speex based resamplers"
> + help
> + The speex based resamplers provide the best cost/quality
> + trade-off on most platforms. It's recommended to only disable
> + this when no resampling is required.
> +
> endif
> diff --git a/rules/pulseaudio.make b/rules/pulseaudio.make
> index 8dda3501a0a9..2e3d2167aa3c 100644
> --- a/rules/pulseaudio.make
> +++ b/rules/pulseaudio.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_PULSEAUDIO) += pulseaudio
> #
> # Paths and names
> #
> -PULSEAUDIO_VERSION := 8.0
> -PULSEAUDIO_MD5 := 8678442ba0bb4b4c33ac6f62542962df
> +PULSEAUDIO_VERSION := 12.2
> +PULSEAUDIO_MD5 := c42f1f1465e8df9859d023dc184734bf
> PULSEAUDIO := pulseaudio-$(PULSEAUDIO_VERSION)
> PULSEAUDIO_SUFFIX := tar.xz
> PULSEAUDIO_URL := http://freedesktop.org/software/pulseaudio/releases/$(PULSEAUDIO).$(PULSEAUDIO_SUFFIX)
The md5 for LICENSE has changed.
> @@ -51,6 +51,7 @@ PULSEAUDIO_CONF_OPT := \
> --enable-atomic-arm-memory-barrier \
> --$(call ptx/endis, PTXCONF_ARCH_ARM_NEON)-neon-opt \
> $(GLOBAL_LARGE_FILE_OPTION) \
> + --enable-memfd \
> --disable-x11 \
> --disable-tests \
> --disable-samplerate \
> @@ -61,24 +62,25 @@ PULSEAUDIO_CONF_OPT := \
> --disable-esound \
> --disable-solaris \
> --disable-waveout \
> - --disable-glib2 \
> + --$(call ptx/endis, PTXCONF_PULSEAUDIO_GLIB)-glib2 \
> --disable-gtk3 \
> + --disable-gsettings \
> --disable-gconf \
> + --disable-schemas-compile \
> --disable-avahi \
> --disable-jack \
> --disable-asyncns \
> --disable-tcpwrap \
> - --disable-tcpwrap \
> - --disable-dbus \
> + --disable-lirc \
> + --$(call ptx/endis, PTXCONF_PULSEAUDIO_BLUETOOTH)-dbus \
> --disable-bluez4 \
> - --disable-bluez5 \
> + --$(call ptx/endis, PTXCONF_PULSEAUDIO_BLUETOOTH)-bluez5 \
> --disable-bluez5-ofono-headset \
> --disable-bluez5-native-headset \
> --enable-udev \
> --disable-hal-compat \
> $(GLOBAL_IPV6_OPTION) \
> --disable-openssl \
> - --disable-xen \
> --disable-gcov \
> --enable-orc \
> --$(call ptx/endis, PTXCONF_PULSEAUDIO_SYSTEMD)-systemd-daemon \
> @@ -95,10 +97,20 @@ PULSEAUDIO_CONF_OPT := \
> --disable-force-preopen \
> --with-caps \
> --with-database=simple \
> + --with-pulsedsp-location= \
> --without-fftw \
> - --without-speex \
> + --$(call ptx/wwo, PTXCONF_PULSEAUDIO_SPEEX)-speex \
> --without-soxr \
> - --with-systemduserunitdir=/usr/lib/systemd/user
> + --with-systemduserunitdir=/usr/lib/systemd/user \
> + --with-system-user= \
> + --with-system-group= \
This will result pulse/pulse. Those users should be added.
> + --with-access-group=pulse-access \
> + --with-mac-version-min= \
> + --with-mac-sysroot= \
> + --with-preopen-mods=all \
> + --with-module-dir=/usr/lib/pulse-$(PULSEAUDIO_VERSION)/modules \
> + --with-udev-rules-dir=lib/udev/rules.d \
> + --with-zsh-completion-dir=
>
> PULSEAUDIO_LDFLAGS := -Wl,-rpath,/usr/lib/pulseaudio:/usr/lib/pulse-$(PULSEAUDIO_VERSION)/modules
>
> @@ -129,9 +141,16 @@ $(STATEDIR)/pulseaudio.targetinstall:
> @$(call install_alternative, pulseaudio, 0, 0, 0644, /etc/pulse/system.pa)
> @$(call install_alternative, pulseaudio, 0, 0, 0644, /etc/pulse/default.pa)
>
> +ifdef PTXCONF_PULSEAUDIO_BLUETOOTH
> + @$(call install_alternative, pulseaudio, 0, 0, 0644, \
> + /usr/share/dbus-1/system.d/org.PulseAudio1.conf)
This file does not exist, but /etc/dbus-1/system.d/pulseaudio-system.conf
does and should be installed.
Michael
> +endif
> +
> ifdef PTXCONF_PULSEAUDIO_SYSTEMD
> @$(call install_alternative, pulseaudio, 0, 0, 0644, \
> /usr/lib/systemd/system/pulseaudio.service)
> + @$(call install_link, pulseaudio, ../pulseaudio.service, \
> + /usr/lib/systemd/system/multi-user.target.wants/pulseaudio.service)
> @$(call install_alternative, pulseaudio, 0, 0, 0644, \
> /usr/lib/systemd/system/pulseaudio.socket)
> @$(call install_link, pulseaudio, ../pulseaudio.socket, \
> @@ -153,6 +172,10 @@ endif
> @$(call install_lib, pulseaudio, 0, 0, 0644, pulseaudio/libpulsecommon-$(PULSEAUDIO_VERSION))
> @$(call install_tree, pulseaudio, 0, 0, -, /usr/lib/pulse-$(PULSEAUDIO_VERSION)/modules)
>
> +ifdef PTXCONF_PULSEAUDIO_GLIB
> + @$(call install_lib, pulseaudio, 0, 0, 0644, libpulse-mainloop-glib)
> +endif
> +
> @$(call install_tree, pulseaudio, 0, 0, -, /usr/share/pulseaudio)
>
> @$(call install_finish, pulseaudio)
> --
> 2.19.1
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-11-22 6:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 15:01 [ptxdist] [PATCH 1/3] speex: version bump 1.2rc1 -> 1.2 Lucas Stach
2018-11-05 15:01 ` [ptxdist] [PATCH 2/3] sbc: new package Lucas Stach
2018-11-05 15:01 ` [ptxdist] [PATCH 3/3] pulseaudio: version bump 8.0 -> 12.2 Lucas Stach
2018-11-22 6:24 ` Michael Olbrich [this message]
2018-11-22 10:06 ` Roland Hieber
2018-11-22 10:12 ` Michael Olbrich
2018-11-22 10:27 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122062412.dl2u453rs22ujpzx@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox