mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v2] alsa-lib: version bump 1.1.4.1 -> 1.1.6
Date: Tue, 16 Oct 2018 15:09:40 +0200	[thread overview]
Message-ID: <20181016130940.4vue4whh26nddgs2@pengutronix.de> (raw)
In-Reply-To: <20181016090819.GA12749@lenoch>

On Tue, Oct 16, 2018 at 11:08:20AM +0200, Ladislav Michl wrote:
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
>  Changes:
>  -v2: just use --with-pcm-plugins=all unconditionally

Fails in my build test (all options enabled). I've not looked at this in detail:

[...]
Making all in conf
make[3]: Entering directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6/src/conf'
Making all in cards
make[4]: Entering directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6/src/conf/cards'
make[4]: *** No rule to make target 'SI7018/sndoc-mixer.alisp', needed by 'all-am'.  Stop.
make[4]: Leaving directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6/src/conf/cards'
Makefile:423: recipe for target 'all-recursive' failed
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6/src/conf'
Makefile:556: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6/src'
Makefile:402: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '.../platform-arm-hf/build-target/alsa-lib-1.1.6'
.../ptxdist/rules/post/ptxd_make_world_compile.make:21: recipe for target '.../platform-arm-hf/state/alsa-lib.compile' failed
make: *** [.../platform-arm-hf/state/alsa-lib.compile] Error 2

Michael

>  .../0001-add-largefile-support.patch          |  0
>  .../autogen.sh                                |  0
>  .../series                                    |  0
>  rules/alsa-lib.make                           | 19 +++++++------------
>  4 files changed, 7 insertions(+), 12 deletions(-)
>  rename patches/{alsa-lib-1.1.4.1 => alsa-lib-1.1.6}/0001-add-largefile-support.patch (100%)
>  rename patches/{alsa-lib-1.1.4.1 => alsa-lib-1.1.6}/autogen.sh (100%)
>  rename patches/{alsa-lib-1.1.4.1 => alsa-lib-1.1.6}/series (100%)
> 
> diff --git a/patches/alsa-lib-1.1.4.1/0001-add-largefile-support.patch b/patches/alsa-lib-1.1.6/0001-add-largefile-support.patch
> similarity index 100%
> rename from patches/alsa-lib-1.1.4.1/0001-add-largefile-support.patch
> rename to patches/alsa-lib-1.1.6/0001-add-largefile-support.patch
> diff --git a/patches/alsa-lib-1.1.4.1/autogen.sh b/patches/alsa-lib-1.1.6/autogen.sh
> similarity index 100%
> rename from patches/alsa-lib-1.1.4.1/autogen.sh
> rename to patches/alsa-lib-1.1.6/autogen.sh
> diff --git a/patches/alsa-lib-1.1.4.1/series b/patches/alsa-lib-1.1.6/series
> similarity index 100%
> rename from patches/alsa-lib-1.1.4.1/series
> rename to patches/alsa-lib-1.1.6/series
> diff --git a/rules/alsa-lib.make b/rules/alsa-lib.make
> index 4e150d42a..f3fe93aad 100644
> --- a/rules/alsa-lib.make
> +++ b/rules/alsa-lib.make
> @@ -20,8 +20,8 @@ PACKAGES-$(PTXCONF_ALSA_LIB) += alsa-lib
>  ALSA_LIB_SUFFIX		:= tar.bz2
>  
>  ifdef PTXCONF_ALSA_LIB_FULL
> -ALSA_LIB_VERSION	:= 1.1.4.1
> -ALSA_LIB_MD5		:= 29fa3e69122d3cf3e8f0e01a0cb1d183
> +ALSA_LIB_VERSION	:= 1.1.6
> +ALSA_LIB_MD5		:= 2f981a8f7897c59ec2ddc44916d33788
>  ALSA_LIB		:= alsa-lib-$(ALSA_LIB_VERSION)
>  ALSA_LIB_URL		:= \
>  	http://dl.ambiweb.de/mirrors/ftp.alsa-project.org/lib/$(ALSA_LIB).$(ALSA_LIB_SUFFIX) \
> @@ -43,13 +43,11 @@ ALSA_LIB_LICENSE	:= LGPL-2.1-or-later
>  # Prepare
>  # ----------------------------------------------------------------------------
>  
> -ALSA_LIB_PATH	:= PATH=$(CROSS_PATH)
> -ALSA_LIB_ENV 	:= $(CROSS_ENV)
> -
>  #
>  # autoconf
>  #
> -ALSA_LIB_AUTOCONF := \
> +ALSA_LIB_CONF_TOOL	:= autoconf
> +ALSA_LIB_CONF_OPT	:= \
>  	$(CROSS_AUTOCONF_USR) \
>  	$(GLOBAL_LARGE_FILE_OPTION) \
>  	--enable-shared \
> @@ -77,14 +75,11 @@ ALSA_LIB_AUTOCONF := \
>  	--with-pthread \
>  	--with-librt \
>  	--with-alsa-devdir=/dev/snd \
> -	--with-aload-devdir=/dev
> -
> -ifdef PTXCONF_ALSA_LIB_PCM
> -ALSA_LIB_AUTOCONF += --with-pcm-plugins=all
> -endif
> +	--with-aload-devdir=/dev \
> +	--with-pcm-plugins=all
>  
>  ifdef PTXCONF_ALSA_LIB_LIGHT
> -ALSA_LIB_AUTOCONF += \
> +ALSA_LIB_CONF_OPT += \
>  	--enable-everyhing \
>  	--enable-tlv \
>  	--enable-timer \
> -- 
> 2.19.1
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

  reply	other threads:[~2018-10-16 13:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-16  9:08 Ladislav Michl
2018-10-16 13:09 ` Michael Olbrich [this message]
2018-10-16 14:17   ` Ladislav Michl
2018-10-16 19:31     ` Ladislav Michl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181016130940.4vue4whh26nddgs2@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox