From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 2/7] u-boot: add support for oldconfig/menuconfig
Date: Tue, 16 Oct 2018 10:25:14 +0200 [thread overview]
Message-ID: <20181016082514.5qnabbs5bsfbyzgp@pengutronix.de> (raw)
In-Reply-To: <20181010120338.2717-2-a.fatoum@pengutronix.de>
Hi,
So it looks like we'll need to support the old mechanism as well.
Add a option 'EXTERNAL_CONFIG' to enable the config file.
On Wed, Oct 10, 2018 at 02:03:33PM +0200, Ahmad Fatoum wrote:
> while at it, remove U_BOOT_PATH, because it's PATH=$(CROSS_PATH) already
> by default.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> rules/u-boot.make | 42 ++++++++++++++++++++++++++++++++++--------
> 1 file changed, 34 insertions(+), 8 deletions(-)
>
> diff --git a/rules/u-boot.make b/rules/u-boot.make
> index aa7a01ca8fea..46cfc192825a 100644
> --- a/rules/u-boot.make
> +++ b/rules/u-boot.make
> @@ -26,6 +26,9 @@ U_BOOT_SOURCE := $(SRCDIR)/$(U_BOOT).$(U_BOOT_SUFFIX)
> U_BOOT_DIR := $(BUILDDIR)/$(U_BOOT)
> U_BOOT_LICENSE := GPL-2.0-only
>
ifdef PTXCONF_EXTERNAL_CONFIG
> +U_BOOT_CONFIG := $(call ptx/in-platformconfigdir, \
> + $(call remove_quotes, $(PTXCONF_U_BOOT_CONFIG)))
> +
> # ----------------------------------------------------------------------------
> # Prepare
> # ----------------------------------------------------------------------------
> @@ -37,17 +40,26 @@ U_BOOT_WRAPPER_BLACKLIST := \
> TARGET_DEBUG \
> TARGET_BUILD_ID
>
> -U_BOOT_PATH := PATH=$(CROSS_PATH)
> -U_BOOT_MAKE_OPT := CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) HOSTCC=$(HOSTCC)
> +U_BOOT_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> +U_BOOT_CONF_TOOL := kconfig
> +U_BOOT_CONF_OPT := CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) HOSTCC=$(HOSTCC)
> U_BOOT_MAKE_PAR := NO
> U_BOOT_TAGS_OPT := ctags cscope etags
> +U_BOOT_MAKE_OPT := $(U_BOOT_CONF_OPT)
>
> -$(STATEDIR)/u-boot.prepare:
> - @$(call targetinfo)
ifdef PTXCONF_EXTERNAL_CONFIG
@$(call world/prepare, U_BOOT)
else
... the old stuff
endif
> - cd $(U_BOOT_DIR) && \
> - $(U_BOOT_PATH) \
> - $(MAKE) $(U_BOOT_MAKE_OPT) $(PTXCONF_U_BOOT_CONFIG)
> - @$(call touch)
> +ifdef PTXCONF_U_BOOT
> +$(U_BOOT_CONFIG):
> + @echo
> + @echo "****************************************************************************"
> + @echo "***** Please generate a u-boot config with 'ptxdist menuconfig u-boot' *****"
> + @echo "****************************************************************************"
> + @echo
> + @echo
> + @exit 1
> +endif
> +
> +
> +$(STATEDIR)/u-boot.prepare: $(U_BOOT_CONFIG)
This is no longer needed. PTXdist creates this dependency implicitly.
Michael
>
> # ----------------------------------------------------------------------------
> # Install
> @@ -91,4 +103,18 @@ $(STATEDIR)/u-boot.clean:
> @rm -f $(IMAGEDIR)/u-boot.bin $(IMAGEDIR)/u-boot.srec $(IMAGEDIR)/u-boot.elf
> @rm -f $(IMAGEDIR)/u-boot.imx
>
> +# ----------------------------------------------------------------------------
> +# oldconfig / menuconfig
> +# ----------------------------------------------------------------------------
> +
> +u-boot_oldconfig u-boot_menuconfig u-boot_nconfig: $(STATEDIR)/u-boot.extract
> + @$(call world/kconfig-setup, U_BOOT)
> +
> + @cd $(U_BOOT_DIR) && \
> + $(U_BOOT_PATH) $(U_BOOT_ENV) $(MAKE) $(U_BOOT_CONF_OPT) \
> + $(subst u-boot_,,$@)
> +
> + @$(call world/kconfig-sync, U_BOOT)
> +
> +
> # vim: syntax=make
> --
> 2.19.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-10-16 8:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 12:03 [ptxdist] [PATCH 1/7] u-boot: specify GPL-2.0-only as LICENSE Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 2/7] u-boot: add support for oldconfig/menuconfig Ahmad Fatoum
2018-10-16 7:52 ` Michael Olbrich
2018-10-16 8:02 ` Alexander Dahl
2018-10-16 8:25 ` Michael Olbrich [this message]
2018-10-10 12:03 ` [ptxdist] [PATCH 3/7] u-boot: add V=$(PTXDIST_VERBOSE) to make options Ahmad Fatoum
2018-10-11 6:52 ` Alexander Dahl
2018-10-10 12:03 ` [ptxdist] [PATCH 4/7] u-boot: run install(1)/rm(1) with -v Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 5/7] u-boot: add u-boot{-dtb, -with-spl-pbl}.bin image installation options Ahmad Fatoum
2019-02-05 7:30 ` Alexander Dahl
2019-02-05 9:29 ` Ahmad Fatoum
2018-10-10 12:03 ` [ptxdist] [PATCH 6/7] u-boot: allow generation of custom environment binary Ahmad Fatoum
2018-10-16 8:13 ` Michael Olbrich
2018-10-16 10:58 ` Denis OSTERLAND
2018-10-16 11:27 ` Alexander Dahl
2018-10-16 12:26 ` Michael Olbrich
2018-10-16 13:13 ` Alexander Dahl
2019-04-04 14:17 ` Alexander Dahl
2018-10-16 11:20 ` Alexander Dahl
2018-10-10 12:03 ` [ptxdist] [PATCH 7/7] u-boot: allow generation of boot script Ahmad Fatoum
2018-10-11 6:44 ` [ptxdist] [PATCH 1/7] u-boot: specify GPL-2.0-only as LICENSE Alexander Dahl
2018-10-11 9:05 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016082514.5qnabbs5bsfbyzgp@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox