From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] bluez: version bump 5.30 -> 5.50
Date: Tue, 9 Oct 2018 12:52:56 +0200 [thread overview]
Message-ID: <20181009105256.4paco2gh6nprhhg6@pengutronix.de> (raw)
In-Reply-To: <20181005140306.23961-1-r.hieber@pengutronix.de>
On Fri, Oct 05, 2018 at 04:03:06PM +0200, Roland Hieber wrote:
> Update the list of configure options and their dependencies, make the
> various profiles configurable, and set the default enable/disable values
> in Kconfig according to the default values in the configure script.
> Also pin down the GPL/LGPL license MD5 sums.
>
> Some tools are now deprecated, hide them behind a kconfig option.
> gatttool and some of the test scripts are no longer installed, remove
> them from the targetinstall stage.
>
> Also use install_alternative instead of install_copy for all config
> files and systemd units.
>
> There are no patches in PTXdist which would need porting.
>
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> rules/bluez.in | 65 +++++++++++++++++++++++++++++++++++++++++++++---
> rules/bluez.make | 61 ++++++++++++++++++++++++++++++++-------------
> 2 files changed, 105 insertions(+), 21 deletions(-)
>
> diff --git a/rules/bluez.in b/rules/bluez.in
> index e14135dd6..285b2f2a8 100644
> --- a/rules/bluez.in
> +++ b/rules/bluez.in
> @@ -8,7 +8,9 @@ menuconfig BLUEZ
> select DBUS
> select GLIB
> select UDEV
> - select READLINE if BLUEZ_CLIENT
> + select READLINE if BLUEZ_CLIENT || BLUEZ_PROFILE_MESH
> + select JSON_C if BLUEZ_PROFILE_MESH
> + select LIBICAL if BLUEZ_PROFILE_OBEX
> select PYGOBJECT if BLUEZ_INSTALL_TESTSCRIPTS
> select DBUS_PYTHON if BLUEZ_INSTALL_TESTSCRIPTS
> help
> @@ -17,6 +19,55 @@ menuconfig BLUEZ
>
> if BLUEZ
>
> +config BLUEZ_PROFILE_SAP
> + bool "build with SAP support"
> + help
> + Build with support for the SIM Access Profile (SAP)
> +
> +config BLUEZ_PROFILE_A2DP
> + default y
> + bool "build with A2DP support"
> + help
> + Build with support for the Advanced Audio Distribution Profile (A2DP)
> +
> +config BLUEZ_PROFILE_AVRCP
> + default y
> + bool "build with AVRCP support"
> + help
> + Build with support for Audio/Video Remote Control Profile (AVRCP)
> +
> +config BLUEZ_PROFILE_NETWORK
> + default y
> + bool "build with network profiles support"
> + help
> + Build with support for the Bluetooth Network Encapsulation Protocol
> + (BNEP)
> +
> +config BLUEZ_PROFILE_HID
> + default y
> + bool "build with HID/HoG support"
> + help
> + Build with support for the Human Interface Device (HID) and HID over
> + GATT (HoG) profiles
> +
> +config BLUEZ_PROFILE_HEALTH
> + bool "build with health profiles support"
> + help
> + Build with support for medical device profiles
> +
> +config BLUEZ_PROFILE_MESH
> + # needs libell > 0.3
> + depends on BROKEN
> + bool "build with mesh support"
> + help
> + Build with support for Bluetooth mesh networking
> +
> +config BLUEZ_PROFILE_OBEX
> + bool "build with OBEX support"
> + help
> + Build with support for the OBject EXchange (OBEX) profile.
> + Enable this to build obexd.
> +
Why so many new options? Can we just enable or disable those?
Michael
> config BLUEZ_SYSTEMD_UNIT
> bool
> default y
> @@ -26,9 +77,15 @@ config BLUEZ_SYSTEMD_UNIT
> config BLUEZ_UTILS
> bool "install bluez tools"
> help
> - install the tools "bccmd bluemoon btmon ciptool hciattach
> - hciconfig hcidump hcitool hex2hcd l2ping l2test mpris-proxy rctest
> - rfcomm sdptoolciptool l2ping hcitool rctest rfcomm" and "sdptool"
> + install the tools: bccmd bluemoon btmon hex2hcd l2ping l2test
> + mpris-proxy rctest l2ping rctest
> +
> +config BLUEZ_UTILS_DEPRECATED
> + depends on BLUEZ_UTILS
> + bool "install deprecated tools"
> + help
> + Build and install the following tools: hciattach hciconfig hcitool
> + hcidump rfcomm sdptool ciptool
>
> config BLUEZ_CLIENT
> bool "install client tools: bluetoothctl, gatttool"
> diff --git a/rules/bluez.make b/rules/bluez.make
> index de6a1e5ec..8fdb6893f 100644
> --- a/rules/bluez.make
> +++ b/rules/bluez.make
> @@ -1,6 +1,8 @@
> # -*-makefile-*-
> #
> # Copyright (C) 2010 by Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
> +# Copyright (C) 2018 Pengutronix, Roland Hieber <r.hieber@pengutronix.de>
> +#
> #
> # See CREDITS for details about who has contributed to this project.
> #
> @@ -16,14 +18,17 @@ PACKAGES-$(PTXCONF_BLUEZ) += bluez
> #
> # Paths and names
> #
> -BLUEZ_VERSION := 5.30
> -BLUEZ_MD5 := a7b99d40cd78c7497abdfd7f024fd07b
> +BLUEZ_VERSION := 5.50
> +BLUEZ_MD5 := 860349d2afebf130f772c0f2943b5a27
> BLUEZ := bluez-$(BLUEZ_VERSION)
> BLUEZ_SUFFIX := tar.gz
> BLUEZ_URL := $(call ptx/mirror, KERNEL, bluetooth/$(BLUEZ).$(BLUEZ_SUFFIX))
> BLUEZ_SOURCE := $(SRCDIR)/$(BLUEZ).$(BLUEZ_SUFFIX)
> BLUEZ_DIR := $(BUILDDIR)/$(BLUEZ)
> BLUEZ_LICENSE := GPL-2.0-or-later LGPL-2.1-or-later
> +BLUEZ_LICENSE_FILES := \
> + file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e \
> + file://COPYING.LIB;md5=fb504b67c50331fc78734fed90fb0e09
> ifdef PTXCONF_BLUEZ_INSTALL_TESTSCRIPTS
> BLUEZ_DEVPKG := NO
> endif
> @@ -41,20 +46,34 @@ BLUEZ_CONF_OPT := $(CROSS_AUTOCONF_USR) \
> --disable-debug \
> --disable-pie \
> --enable-threads \
> + --disable-backtrace \
> --enable-library \
> --$(call ptx/endis, PTXCONF_BLUEZ_INSTALL_TESTSCRIPTS)-test \
> + --disable-nfc \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_SAP)-sap \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_A2DP)-a2dp \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_AVRCP)-avrcp \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_NETWORK)-network \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_HID)-hid \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_HID)-hog \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_HEALTH)-health \
> --enable-tools \
> --enable-monitor \
> --enable-udev \
> --disable-cups \
> - --disable-obex \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_MESH)-mesh \
> + --disable-midi \
> + --$(call ptx/endis, PTXCONF_BLUEZ_PROFILE_OBEX)-obex \
> + --disable-btpclient \
> --$(call ptx/endis, PTXCONF_BLUEZ_CLIENT)-client \
> --enable-systemd \
> --enable-datafiles \
> --disable-manpages \
> --disable-experimental \
> + --$(call ptx/endis, PTXCONF_BLUEZ_UTILS_DEPRECATED)-deprecated \
> --disable-sixaxis \
> --disable-android \
> + --disable-logger \
> --with-dbusconfdir=/usr/share \
> --with-dbussystembusdir=/usr/share/dbus-1/system-services \
> --with-dbussessionbusdir=/usr/share/dbus-1/services \
> @@ -78,22 +97,31 @@ $(STATEDIR)/bluez.targetinstall:
> @$(call install_lib, bluez, 0, 0, 0644, libbluetooth)
>
> @$(call install_copy, bluez, 0, 0, 0755, -, /usr/libexec/bluetooth/bluetoothd)
> +ifdef PTXCONF_BLUEZ_PROFILE_OBEX
> @$(call install_copy, bluez, 0, 0, 0755, -, /usr/libexec/bluetooth/obexd)
> +endif
> @$(call install_lib, bluez, 0, 0, 0644, libbluetooth)
>
> ifdef PTXCONF_BLUEZ_UTILS
> - @$(foreach binprogram, bccmd bluemoon btmon ciptool \
> - hciattach hciconfig hcidump hcitool hex2hcd l2ping \
> - l2test mpris-proxy rctest rfcomm sdptool, \
> + @$(foreach binprogram, bccmd bluemoon btmon hex2hcd l2ping \
> + l2test mpris-proxy rctest, \
> + $(call install_copy, bluez, 0, 0, 0755, -, \
> + /usr/bin/$(binprogram));)
> +
> +ifdef PTXCONF_BLUEZ_UTILS_DEPRECATED
> + @$(foreach binprogram, ciptool hciattach hciconfig hcidump hcitool \
> + rfcomm sdptool, \
> $(call install_copy, bluez, 0, 0, 0755, -, \
> /usr/bin/$(binprogram));)
> endif
> +endif
> +
> +ifdef BLUEZ_PROFILE_MESH
> + @$(call install_copy, bluez, 0, 0, 0755, -, /usr/bin/meshctl)
> +endif
>
> ifdef PTXCONF_BLUEZ_CLIENT
> @$(call install_copy, bluez, 0, 0, 0755, -, /usr/bin/bluetoothctl)
> -
> - @$(call install_copy, bluez, 0, 0, 0755, $(BLUEZ_DIR)/attrib/gatttool, \
> - /usr/bin/gatttool)
> endif
>
> ifdef PTXCONF_BLUEZ_INSTALL_TESTSCRIPTS
> @@ -103,13 +131,12 @@ ifdef PTXCONF_BLUEZ_INSTALL_TESTSCRIPTS
> /usr/lib/bluez/test/$(testdata));)
>
> @$(foreach testprog, list-devices opp-client \
> - simple-endpoint test-alert test-discovery \
> - test-heartrate test-nap test-proximity \
> - map-client pbap-client simple-player test-cyclingspeed \
> + simple-endpoint test-discovery test-nap \
> + map-client pbap-client simple-player \
> test-health test-hfp test-network test-sap-server \
> ftp-client monitor-bluetooth simple-agent \
> test-adapter test-device test-health-sink test-manager \
> - test-profile test-thermometer, \
> + test-profile, \
> $(call install_copy, bluez, 0, 0, 0755, -, \
> /usr/lib/bluez/test/$(testprog))$(ptx/nl))
> @$(foreach testprog, bluezutils.py dbusdef.py sap_client.py, \
> @@ -117,16 +144,16 @@ ifdef PTXCONF_BLUEZ_INSTALL_TESTSCRIPTS
> /usr/lib/bluez/test/$(testprog))$(ptx/nl))
> endif
>
> - @$(call install_copy, bluez, 0, 0, 0644, -, \
> + @$(call install_alternative, bluez, 0, 0, 0644, \
> /usr/share/dbus-1/system.d/bluetooth.conf)
> - @$(call install_tree, bluez, 0, 0, -, /usr/lib/udev/rules.d/)
> + @$(call install_alternative_tree, bluez, 0, 0, /usr/lib/udev/rules.d/)
>
> ifdef PTXCONF_BLUEZ_SYSTEMD_UNIT
> - @$(call install_copy, bluez, 0, 0, 0644, -, \
> + @$(call install_alternative, bluez, 0, 0, 0644, \
> /usr/lib/systemd/system/bluetooth.service)
> @$(call install_link, bluez, ../bluetooth.service, \
> /usr/lib/systemd/system/multi-user.target.wants/bluetooth.service)
> - @$(call install_copy, bluez, 0, 0, 0644, -, \
> + @$(call install_alternative, bluez, 0, 0, 0644, \
> /usr/lib/systemd/user/obex.service)
> endif
>
> --
> 2.19.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-10-09 10:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 14:03 Roland Hieber
2018-10-08 6:55 ` Juergen Borleis
2018-10-09 10:52 ` Michael Olbrich [this message]
2018-10-09 13:16 ` Roland Hieber
2018-10-09 15:07 ` Michael Olbrich
2018-10-09 13:35 ` Juergen Borleis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009105256.4paco2gh6nprhhg6@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox