From: Ladislav Michl <ladis@linux-mips.org>
To: Roland Hieber <r.hieber@pengutronix.de>
Cc: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v2 1/3] jimtcl: new package
Date: Thu, 13 Sep 2018 12:38:47 +0200 [thread overview]
Message-ID: <20180913103847.GA31329@lenoch> (raw)
In-Reply-To: <20180913095937.cxaaaupazdwqhzmh@pengutronix.de>
On Thu, Sep 13, 2018 at 11:59:37AM +0200, Roland Hieber wrote:
> On Thu, Sep 13, 2018 at 10:32:26AM +0200, Ladislav Michl wrote:
> [...]
> > diff --git a/rules/jimtcl.make b/rules/jimtcl.make
> > new file mode 100644
> > index 000000000..16a5e2ae3
> > --- /dev/null
> > +++ b/rules/jimtcl.make
> > @@ -0,0 +1,77 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2018 by Ladislav Michl <ladis@linux-mips.org>
> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_JIMTCL) += jimtcl
> > +
> > +#
> > +# Paths and names
> > +#
> > +JIMTCL_VERSION := 0.78
> > +JIMTCL_MD5 := bde9021d78a77fe28e1bbc423142ab23
> > +JIMTCL := jimtcl-$(JIMTCL_VERSION)
> > +JIMTCL_SUFFIX := tar.xz
> > +JIMTCL_URL := http://repo.or.cz/jimtcl.git;tag=$(JIMTCL_VERSION)
> > +JIMTCL_SOURCE := $(SRCDIR)/$(JIMTCL).$(JIMTCL_SUFFIX)
> > +JIMTCL_DIR := $(BUILDDIR)/$(JIMTCL)
> > +JIMTCL_LICENSE := BSD-2-Clause
> > +
> > +# ----------------------------------------------------------------------------
> > +# Prepare
> > +# ----------------------------------------------------------------------------
> > +
> > +#
> > +# Package is not using autoconf but autosetup which is enough compatible...
> > +#
> > +JIMTCL_CONF_ENV := $(CROSS_ENV)
> > +JIMTCL_CONF_TOOL := autoconf
> > +JIMTCL_CONF_OPT := \
> > + $(CROSS_AUTOCONF_USR) \
> > + --shared
>
> configure_helper.py shows a lot of options which are not present here.
> Did you take a look at them?
Yes. Those are related to commit log message :) As Tcl is in staging and
noone bothered I guess Tcl is not important to anyone and thus it does
not make sense to implement features noobody asks for. So jimtcl is here
only to make usb-nodeswitch happy which it does as it is.
> Also I noticed that Makefile.in sets
>
> CC = @CCACHE@ @CC@
> CXX = @CCACHE@ @CXX@
>
> which, in my case, becomes
>
> CC = ccache arm-v7a-linux-gnueabihf-gcc
> CXX = ccache arm-v7a-linux-gnueabihf-g++
>
> which is probably the reason why jimtcl.install fails because my ccache
> is not set up correctly (I did not enable it in ptxdist setup).
I did not enable it either. Which way does install fail in your case?
> I'm not sure how using ccache can be avoided without patching the build
> system.
>
> There is another error happening here in jimtcl.install, but i'm not
> sure if it is related to the faulty ccache usage:
>
> jim-readdir.c: In function 'Jim_ReaddirCmd':
> jim-readdir.c:72:5: error: unknown type name 'DIR'
> DIR *dirPtr;
> ^~~
> make[1]: *** [jim-readdir.o] Error 1
> Makefile:65: recipe for target 'jim-readdir.o' failed
I do not see this message, care to investigate more? Thank you.
> - Roland
>
> > +
> > +# ----------------------------------------------------------------------------
> > +# Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/jimtcl.install:
> > + @$(call targetinfo)
> > + @$(call world/install, JIMTCL)
> > + @ln -sf libjim.so.$(JIMTCL_VERSION) $(JIMTCL_PKGDIR)/usr/lib/libjim.so
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/jimtcl.targetinstall:
> > + @$(call targetinfo)
> > +
> > + @$(call install_init, jimtcl)
> > + @$(call install_fixup, jimtcl, PRIORITY, optional)
> > + @$(call install_fixup, jimtcl, SECTION, base)
> > + @$(call install_fixup, jimtcl, AUTHOR, "Ladislav Michl <ladis@linux-mips.org>")
> > + @$(call install_fixup, jimtcl, DESCRIPTION, \
> > + "A small footprint implementation of the Tcl programming language")
> > +
> > +ifdef PTXCONF_JIMTCL_SHELL
> > + @$(call install_copy, jimtcl, 0, 0, 0755, -, /usr/bin/jimsh)
> > +ifdef PTXCONF_JIMTCL_SYMLINK
> > + @$(call install_link, jimtcl, jimsh, /usr/bin/tclsh)
> > +endif
> > +endif
> > + @$(call install_lib, jimtcl, 0, 0, 0644, libjim)
> > +
> > + @$(call install_finish, jimtcl)
> > +
> > + @$(call touch)
> > +
> > +# vim: syntax=make
> > --
> > 2.19.0
> >
> >
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
>
> --
> Roland Hieber | r.hieber@pengutronix.de |
> Pengutronix e.K. | https://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-09-13 10:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 8:32 Ladislav Michl
2018-09-13 8:34 ` [ptxdist] [PATCH v3 2/3] usb_modeswitch: version bump 2.5.1 -> 2.5.2 Ladislav Michl
2018-09-13 8:35 ` [ptxdist] [PATCH v3 3/3] usb_modeswitch: link dispatcher against JimTcl Ladislav Michl
2018-09-13 9:59 ` [ptxdist] [PATCH v2 1/3] jimtcl: new package Roland Hieber
2018-09-13 10:38 ` Ladislav Michl [this message]
2018-09-17 8:21 ` Michael Olbrich
2018-09-18 7:04 ` Ladislav Michl
2018-09-18 9:07 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913103847.GA31329@lenoch \
--to=ladis@linux-mips.org \
--cc=ptxdist@pengutronix.de \
--cc=r.hieber@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox