mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 2/3] weston: install weston.ini into /etc
Date: Fri, 31 Aug 2018 09:16:34 +0200	[thread overview]
Message-ID: <20180831071634.z7ycbsliwazwspvf@pengutronix.de> (raw)
In-Reply-To: <20180831060948.GA22911@lenoch>

On Fri, Aug 31, 2018 at 08:09:48AM +0200, Ladislav Michl wrote:
> Hello Michael,
> 
> just a nitpick...
> 
> On Thu, Aug 30, 2018 at 06:23:29PM +0200, Michael Tretter wrote:
> > Weston brings an example weston.ini file, which is not installed by
> > default. Use the shipped template to generate a weston.ini for the
> > target system and install it to the default system global path.
> > 
> > Allow to disable weston.ini to use the build-in default configuration or
> > to override it in the projectroot.
> > 
> > Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> > ---
> >  rules/weston.in   |  6 ++++++
> >  rules/weston.make | 19 +++++++++++++++++++
> >  2 files changed, 25 insertions(+)
> > 
> > diff --git a/rules/weston.in b/rules/weston.in
> > index 1c0ebff98..2e760740c 100644
> > --- a/rules/weston.in
> > +++ b/rules/weston.in
> > @@ -81,4 +81,10 @@ config WESTON_WCAP_TOOLS
> >  	help
> >  	  Weston CAPture Tools
> >  
> > +config WESTON_INSTALL_CONFIG
> > +	bool
> > +	prompt "install configuration file"
> > +	help
> > +	  Install the Weston configuration file into /etc/xdg/weston
> > +
> >  endif
> > diff --git a/rules/weston.make b/rules/weston.make
> > index 1817a94f3..1e08b8c80 100644
> > --- a/rules/weston.make
> > +++ b/rules/weston.make
> > @@ -74,6 +74,22 @@ WESTON_CONF_OPT		:= \
> >  	--with-jpeg \
> >  	--without-webp
> >  
> > +# ----------------------------------------------------------------------------
> > +# Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/weston.install:
> > +	@$(call targetinfo)
> > +	@$(call world/install, WESTON)
> > +
> > +	@mkdir -p $(WESTON_PKGDIR)/etc/xdg/weston && \
> > +	 bindir="/usr/bin" \
> > +	 abs_top_builddir="/usr/bin" \
> > +	 libexecdir="/usr/libexec" \
> 
> Seems there are spaces after tab.

Indeed. I prefer an extra tab, like the lines below.

Michael

> > +	ptxd_replace_magic "$(WESTON_DIR)/weston.ini.in" > \
> > +		"$(WESTON_PKGDIR)/etc/xdg/weston/weston.ini"
> > +
> > +	@$(call touch)
> >  
> >  # ----------------------------------------------------------------------------
> >  # Target-Install
> > @@ -141,6 +157,9 @@ endif
> >  		wayland.svg, \
> >  		$(call install_copy, weston, 0, 0, 0644, -, /usr/share/weston/$(image))$(ptx/nl))
> >  
> > +ifdef PTXCONF_WESTON_INSTALL_CONFIG
> > +	@$(call install_alternative, weston, 0, 0, 0644, /etc/xdg/weston/weston.ini)
> > +endif
> >  
> >  	@$(call install_finish, weston)
> >  
> > -- 
> > 2.18.0
> > 
> > 
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

  reply	other threads:[~2018-08-31  7:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-27 13:29 [ptxdist] [PATCH 1/3] wayland: version bump 1.15.0 -> 1.16.0 Philipp Zabel
2018-08-27 13:29 ` [ptxdist] [PATCH 2/3] wayland-protocols: version bump 1.13 -> 1.16 Philipp Zabel
2018-08-27 13:29 ` [ptxdist] [PATCH 3/3] weston: version bump 4.0.0 -> 5.0.0 Philipp Zabel
2018-08-30 16:23   ` [ptxdist] [PATCH 1/3] weston: remove empty clean stage Michael Tretter
2018-08-30 16:23     ` [ptxdist] [PATCH 2/3] weston: install weston.ini into /etc Michael Tretter
2018-08-31  6:09       ` Ladislav Michl
2018-08-31  7:16         ` Michael Olbrich [this message]
2018-08-31  7:19           ` Michael Olbrich
2018-08-30 16:23     ` [ptxdist] [PATCH 3/3] weston: add IVI-Shell support Michael Tretter
2018-08-31  6:11       ` Ladislav Michl
2018-08-31  7:22         ` Michael Olbrich
2018-08-31  8:10     ` [ptxdist] [PATCH v2 1/3] weston: remove empty clean stage Michael Tretter
2018-08-31  8:10       ` [ptxdist] [PATCH v2 2/3] weston: install weston.ini into /etc Michael Tretter
2018-08-31  8:10       ` [ptxdist] [PATCH v2 3/3] weston: add IVI-Shell support Michael Tretter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831071634.z7ycbsliwazwspvf@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox