From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v3] sdl2: add new package
Date: Mon, 16 Jul 2018 15:13:31 +0200 [thread overview]
Message-ID: <20180716131331.lzjin2iwcy3k6ynt@pengutronix.de> (raw)
In-Reply-To: <20180716125443.9979-1-m.grzeschik@pengutronix.de>
On Mon, Jul 16, 2018 at 02:54:43PM +0200, Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> v1 -> v2: - added select to MESALIB_GL* on SDL2_OPENGL*
> - padded prompt entry with extra spaces
> v2 -> v3: - added patch to add egl cflags on configure.in and enabled autogen.sh
>
> ...001-sdl-2.0.8-add-egl-cflags-to-test.patch | 41 ++++
> patches/SDL2-2.0.8/series | 4 +
> rules/sdl2.in | 206 ++++++++++++++++++
> rules/sdl2.make | 164 ++++++++++++++
> 4 files changed, 415 insertions(+)
> create mode 100644 patches/SDL2-2.0.8/0001-sdl-2.0.8-add-egl-cflags-to-test.patch
> create mode 100644 patches/SDL2-2.0.8/series
> create mode 100644 rules/sdl2.in
> create mode 100644 rules/sdl2.make
>
> diff --git a/patches/SDL2-2.0.8/0001-sdl-2.0.8-add-egl-cflags-to-test.patch b/patches/SDL2-2.0.8/0001-sdl-2.0.8-add-egl-cflags-to-test.patch
> new file mode 100644
> index 000000000..84313d2aa
> --- /dev/null
> +++ b/patches/SDL2-2.0.8/0001-sdl-2.0.8-add-egl-cflags-to-test.patch
> @@ -0,0 +1,41 @@
> +From: Sergey Zhuravlevich <zhurxx@gmail.com>
> +Date: Mon, 16 Jul 2018 12:03:42 +0200
> +Subject: [PATCH] sdl-2.0.8: add egl-cflags to test
> +
> +Signed-off-by: Sergey Zhuravlevich <zhurxx@gmail.com>
> +---
> + configure.in | 14 ++++++++++++++
> + 1 file changed, 14 insertions(+)
> +
> +diff --git a/configure.in b/configure.in
> +index 1c7e79338a88..bfa14fbd4fa7 100644
> +--- a/configure.in
> ++++ b/configure.in
> +@@ -2335,6 +2335,17 @@ dnl Find OpenGL ES
> + CheckOpenGLESX11()
> + {
> + if test x$enable_video = xyes -a x$enable_video_opengles = xyes; then
> ++ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
> ++ if test x$PKG_CONFIG != xno; then
> ++ if $PKG_CONFIG --exists egl ; then
> ++ EGL_CFLAGS=`$PKG_CONFIG --cflags egl`
> ++ EXTRA_CFLAGS="$EXTRA_CFLAGS $EGL_CFLAGS"
> ++ fi
> ++ fi
> ++
> ++ save_CFLAGS="$CFLAGS"
> ++ CFLAGS="$save_CFLAGS $EGL_CFLAGS"
PKG_CHECK_MODULES([EGL], [egl],[have_egl=yes],[have_egl=no])
save_CFLAGS="$CFLAGS"
if [ "x$have_egl" = "xyes" ]; then
CFLAGS="$save_CFLAGS $EGL_CFLAGS"
fi
Untested, but PKG_CHECK_MODULES should be used here.
Michael
> ++
> + AC_MSG_CHECKING(for EGL support)
> + video_opengl_egl=no
> + AC_TRY_COMPILE([
> +@@ -2347,6 +2358,9 @@ CheckOpenGLESX11()
> + video_opengl_egl=yes
> + ])
> + AC_MSG_RESULT($video_opengl_egl)
> ++
> ++ CFLAGS="$save_CFLAGS"
> ++
> + if test x$video_opengl_egl = xyes; then
> + AC_DEFINE(SDL_VIDEO_OPENGL_EGL, 1, [ ])
> + fi
> diff --git a/patches/SDL2-2.0.8/series b/patches/SDL2-2.0.8/series
> new file mode 100644
> index 000000000..3693c2785
> --- /dev/null
> +++ b/patches/SDL2-2.0.8/series
> @@ -0,0 +1,4 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +0001-sdl-2.0.8-add-egl-cflags-to-test.patch
> +# 57d72a951bd7f961008ad5274d82876a - git-ptx-patches magic
> diff --git a/rules/sdl2.in b/rules/sdl2.in
> new file mode 100644
> index 000000000..54edea6ab
> --- /dev/null
> +++ b/rules/sdl2.in
> @@ -0,0 +1,206 @@
> +## SECTION=multimedia_sdl
> +
> +menuconfig SDL2
> + tristate
> + prompt "SDL2 "
> + select LIBC_M
> + select LIBC_DL
> + select LIBC_PTHREAD
> + select GCCLIBS_GCC_S
> + select LIBUNWIND
> + select CROSS_NASM if SDL2_VIDEO
> + select ALSA_LIB if SDL2_ALSA
> + select XORG_LIB_X11 if SDL2_XORG
> + select XORG_LIB_XT if SDL2_XORG
> + select XORG_LIB_XVMC if SDL2_XORG && SDL2_VIDEO
> + select DIRECTFB if SDL2_DIRECTFB
> + select TSLIB if SDL2_TSLIB
> + select DBUS if SDL2_DBUS
> + select LIBDRM if SDL2_WAYLAND
> + select MESALIB_GLX if SDL2_OPENGL
> + select MESALIB_GLES1 if SDL2_OPENGLES1
> + select MESALIB_GLES2 if SDL2_OPENGLES2
> + select MESALIB if SDL2_WAYLAND
> + select MESALIB_GBM if SDL2_WAYLAND
> + select MESALIB_EGL if SDL2_WAYLAND
> + select MESALIB_EGL_DRM if SDL2_WAYLAND
> + select MESALIB_EGL_WAYLAND if SDL2_WAYLAND
> + select LIBXKBCOMMON if SDL2_WAYLAND
> + select UDEV if SDL2_UDEV
> + select UDEV_LIBUDEV if SDL2_UDEV
> + select PULSEAUDIO if SDL2_PULSEAUDIO
> + select WAYLAND if SDL2_WAYLAND
> + select WAYLAND_PROTOCOLS if SDL2_WAYLAND
> + help
> + Simple DirectMedia Layer is a cross-platform multimedia
> + library designed to provide low level access to audio,
> + keyboard, mouse, joystick, 3D hardware via OpenGL, and
> + 2D video framebuffer.
> +
> +if SDL2
> +
> +config SDL2_TIMERS
> + bool
> + prompt "SDL2 Timers Support"
> + default y
> + help
> + FIXME
> +
> +config SDL2_FILE
> + bool
> + prompt "SDL2 File Support"
> + default y
> + help
> + FIXME
> +
> +config SDL2_CPUINFO
> + bool
> + prompt "SDL2 CPU Info Support"
> + default y
> + help
> + FIXME
> +
> +menuconfig SDL2_AUDIO
> + bool
> + prompt "SDL2 Audio Support "
> + default y
> + help
> + FIXME
> +
> +if SDL2_AUDIO
> +
> +config SDL2_OSS
> + bool
> + prompt "SDL2 OSS Support"
> + help
> + Open Sound System (OSS) is the first attempt in
> + unifying the digital audio architecture for UNIX.
> + OSS is a set of device drivers that provide a
> + uniform API across all the major UNIX architectures.
> +
> +config SDL2_ALSA
> + bool
> + prompt "SDL2 ALSA Support"
> + default y
> + help
> + The Advanced Linux Sound Architecture (ALSA)
> + provides audio and MIDI functionality to the
> + Linux operating system.
> +
> +config SDL2_PULSEAUDIO
> + bool
> + prompt "SDL2 Pulseaudio Support"
> + default y
> + help
> + pulseaudio
> +
> +endif
> +
> +menuconfig SDL2_VIDEO
> + bool
> + prompt "SDL2 Video Support "
> + default y
> + help
> + FIXME
> +
> +if SDL2_VIDEO
> +
> +config SDL2_KMS
> + bool
> + prompt "KMS Support "
> + help
> + kms video support
> +
> +config SDL2_XORG
> + bool
> + prompt "Xorg Support "
> + help
> + X.Org provides an open source implementation of the
> + X Window System.
> +
> +config SDL2_WAYLAND
> + bool
> + prompt "Wayland Support "
> + help
> + Wayland Window System.
> +
> +config SDL2_DIRECTFB
> + bool
> + depends on STAGING
> + prompt "DirectFB Support"
> + default y
> + help
> + DirectFB is a thin library that provides hardware
> + graphics acceleration, input device handling and
> + abstraction, integrated windowing system with support
> + for translucent windows and multiple display layers,
> + not only on top of the Linux Framebuffer Device.
> +
> +config SDL2_OPENGL
> + bool
> + prompt "OpenGL Support"
> + help
> + OpenGL is a multi-platform software interface to
> + graphics hardware, supporting rendering and imaging
> + operations.
> +
> +config SDL2_OPENGLES
> + bool
> + prompt "OpenGLES Support"
> + help
> + OpenGL ES graphics support
> +
> +config SDL2_OPENGLES1
> + bool
> + prompt "OpenGLES1 Support"
> + help
> + OpenGL ES1 graphics support
> +
> +config SDL2_OPENGLES2
> + bool
> + prompt "OpenGLES2 Support"
> + help
> + OpenGL ES2 graphics support
> +
> +endif
> +
> +config SDL2_EVENT
> + bool
> + prompt "SDL2 Event Support"
> + default y
> + help
> + FIXME
> +
> +config SDL2_JOYSTICK
> + bool
> + prompt "SDL2 Joystick Support"
> + help
> + FIXME
> +
> +config SDL2_THREADS
> + bool
> + prompt "SDL2 Thread Support "
> + default y
> + help
> + Turn on multithreading support
> +
> +config SDL2_TSLIB
> + bool
> + prompt "tslib Support"
> + help
> + Turn on support for the touchscreen library 'tslib'
> +
> +config SDL2_UDEV
> + bool
> + prompt "udev Support"
> + help
> + Turn on support for the udev library
> +
> +config SDL2_DBUS
> + bool
> + prompt "dbus Support"
> +
> + help
> + Turn on support for the dbus library
> +
> +endif
> diff --git a/rules/sdl2.make b/rules/sdl2.make
> new file mode 100644
> index 000000000..51cbf91e7
> --- /dev/null
> +++ b/rules/sdl2.make
> @@ -0,0 +1,164 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2018 by Sergey Zhuravlevich
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_SDL2) += sdl2
> +
> +#
> +# Paths and names
> +#
> +SDL2_VERSION := 2.0.8
> +SDL2_MD5 := 3800d705cef742c6a634f202c37f263f
> +SDL2 := SDL2-$(SDL2_VERSION)
> +SDL2_SUFFIX := tar.gz
> +SDL2_URL := https://www.libsdl.org/release/$(SDL2).$(SDL2_SUFFIX)
> +SDL2_SOURCE := $(SRCDIR)/$(SDL2).$(SDL2_SUFFIX)
> +SDL2_DIR := $(BUILDDIR)/$(SDL2)
> +SDL2_LICENSE := zlib
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/sdl2.extract.post:
> + @$(call targetinfo)
> + cd $(SDL2_DIR) && \
> + $(SDL2_PATH) $(SDL2_ENV) \
> + ./autogen.sh
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#
> +# autoconf
> +#
> +SDL2_CONF_TOOL := autoconf
> +SDL2_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR) \
> + --enable-shared \
> + --disable-static \
> + --enable-libtool-lock \
> + --enable-assertions=auto \
> + --enable-dependency-tracking \
> + --enable-libc \
> + --enable-gcc-atomics \
> + --enable-atomic \
> + --$(call ptx/endis,PTXCONF_SDL2_AUDIO)-audio \
> + --$(call ptx/endis,PTXCONF_SDL2_VIDEO)-video \
> + --disable-render \
> + --$(call ptx/endis,PTXCONF_SDL2_EVENT)-events \
> + --$(call ptx/endis,PTXCONF_SDL2_JOYSTICK)-joystick \
> + --disable-haptic \
> + --disable-power \
> + --disable-filesystem \
> + --$(call ptx/endis,PTXCONF_SDL2_THREADS)-threads \
> + --$(call ptx/endis,PTXCONF_SDL2_TIMERS)-timers \
> + --$(call ptx/endis,PTXCONF_SDL2_FILE)-file \
> + --enable-loadso \
> + --$(call ptx/endis,PTXCONF_SDL2_CPUINFO)-cpuinfo \
> + --enable-assembly \
> + --disable-ssemath \
> + --disable-mmx \
> + --disable-3dnow \
> + --disable-sse \
> + --disable-sse2 \
> + --disable-sse3 \
> + --disable-jack \
> + --disable-jack-shared \
> + --disable-sndio \
> + --disable-sndio-shared \
> + --disable-fusionsound \
> + --disable-fusionsound-shared \
> + --$(call ptx/endis,PTXCONF_SDL2_OSS)-oss \
> + --$(call ptx/endis,PTXCONF_SDL2_ALSA)-alsa \
> + --disable-alsatest \
> + --disable-alsa-shared \
> + --disable-esd \
> + --disable-esdtest \
> + --disable-esd-shared \
> + --$(call ptx/endis,PTXCONF_SDL2_PULSEAUDIO)-pulseaudio \
> + --$(call ptx/endis,PTXCONF_SDL2_PULSEAUDIO)-pulseaudio-shared \
> + --disable-arts \
> + --disable-arts-shared \
> + --disable-nas \
> + --disable-nas-shared \
> + --disable-diskaudio \
> + --disable-dummyaudio \
> + --disable-libsamplerate \
> + --disable-libsamplerate-shared \
> + --$(call ptx/endis,PTXCONF_SDL2_WAYLAND)-video-wayland \
> + --disable-video-wayland-qt-touch \
> + --$(call ptx/endis,PTXCONF_SDL2_WAYLAND)-wayland-shared \
> + --disable-video-mir \
> + --disable-mir-shared \
> + --disable-video-rpi \
> + --disable-altivec \
> + --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11 \
> + --disable-x11-shared \
> + --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-vm \
> + --disable-video-vivante \
> + --disable-video-x11-xinerama \
> + --disable-video-x11-xrandr \
> + --disable-video-x11-xcursor \
> + --disable-video-x11-xdbe \
> + --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xinput \
> + --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-scrnsaver \
> + --$(call ptx/endis,PTXCONF_SDL2_XORG)-video-x11-xshape \
> + --disable-video-cocoa \
> + --disable-render-metal \
> + --$(call ptx/endis,PTXCONF_SDL2_DIRECTFB)-video-directfb \
> + --$(call ptx/endis,PTXCONF_SDL2_DIRECTFB)-directfb-shared \
> + --$(call ptx/endis,PTXCONF_SDL2_KMS)-video-kmsdrm \
> + --$(call ptx/endis,PTXCONF_SDL2_KMS)-kmsdrm-shared \
> + --enable-video-dummy \
> + --$(call ptx/endis,PTXCONF_SDL2_OPENGL)-video-opengl \
> + --$(call ptx/endis,PTXCONF_SDL2_OPENGLES)-video-opengles \
> + --$(call ptx/endis,PTXCONF_SDL2_OPENGLES1)-video-opengles1 \
> + --$(call ptx/endis,PTXCONF_SDL2_OPENGLES2)-video-opengles2 \
> + --disable-video-vulkan \
> + --$(call ptx/endis,PTXCONF_SDL2_UDEV)-libudev \
> + --$(call ptx/endis,PTXCONF_SDL2_DBUS)-dbus \
> + --disable-ime \
> + --disable-ibus \
> + --disable-fcitx \
> + --$(call ptx/endis,PTXCONF_SDL2_TSLIB)-input-tslib \
> + --enable-pthreads \
> + --enable-pthread-sem \
> + --disable-directx \
> + --enable-sdl-dlopen \
> + --enable-clock_gettime \
> + --disable-rpath \
> + --disable-render-d3d \
> + --$(call ptx/wwo,PTXCONF_SDL2_XORG)-x
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/sdl2.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, sdl2)
> + @$(call install_fixup, sdl2,PRIORITY,optional)
> + @$(call install_fixup, sdl2,SECTION,base)
> + @$(call install_fixup, sdl2,AUTHOR,"Sergey Zhuravlevich <zhurxx@gmail.com>")
> + @$(call install_fixup, sdl2,DESCRIPTION,missing)
> +
> + @$(call install_lib, sdl2, 0, 0, 0644, libSDL2-2.0)
> +
> + @$(call install_finish, sdl2)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 2.18.0
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2018-07-16 13:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 14:35 [ptxdist] [PATCH v2 0/6] sdl2: add support for new packages Michael Grzeschik
2018-07-13 14:35 ` [ptxdist] [PATCH v2 1/6] sdl2: add new package Michael Grzeschik
2018-07-16 12:54 ` [ptxdist] [PATCH v3] " Michael Grzeschik
2018-07-16 13:07 ` Michael Olbrich
2018-07-16 13:13 ` Michael Olbrich [this message]
2018-07-13 14:35 ` [ptxdist] [PATCH v2 2/6] sdl2-test: " Michael Grzeschik
2018-07-13 14:35 ` [ptxdist] [PATCH v2 3/6] sdl2-image: " Michael Grzeschik
2018-07-13 14:35 ` [ptxdist] [PATCH v2 4/6] sdl2-net: " Michael Grzeschik
2018-07-13 14:35 ` [ptxdist] [PATCH v2 5/6] sdl2-ttf: " Michael Grzeschik
2018-07-13 14:35 ` [ptxdist] [PATCH v2 6/6] sdl2-mixer: " Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180716131331.lzjin2iwcy3k6ynt@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox