From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] smcroute: new package
Date: Thu, 17 May 2018 12:06:57 +0200 [thread overview]
Message-ID: <20180517100656.xwmb4clbshv3zcch@pengutronix.de> (raw)
In-Reply-To: <20180508120222.b2zp6uatuyoqpxta@pengutronix.de>
On Tue, May 08, 2018 at 02:02:22PM +0200, Michael Olbrich wrote:
> On Mon, May 07, 2018 at 06:47:04PM +0200, Ladislav Michl wrote:
> > Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
>
> configure_helper.py gives me:
>
> --- rules/smcroute.make
> +++ smcroute-2.4.0
> @@ -2,5 +2,9 @@
> --sysconfdir=/etc
> --localstatedir=/var
> --libdir=/usr/lib
> - --build=x86_64-host-linux-gnu
> - --host=arm-v5te-linux-gnueabi
>
> This can be ignored.
>
> + --enable-mrdisc
> + --disable-ipv6
> + --disable-client
> + --disable-config
> + --without-libcap
> + --with-systemd=DIR
>
> I think all of those should be set as appropriate.
>
> Michael
>
> > ---
> > rules/smcroute.in | 12 ++++++++++
> > rules/smcroute.make | 53 +++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 65 insertions(+)
> > create mode 100644 rules/smcroute.in
> > create mode 100644 rules/smcroute.make
> >
> > diff --git a/rules/smcroute.in b/rules/smcroute.in
> > new file mode 100644
> > index 000000000..8d3a29752
> > --- /dev/null
> > +++ b/rules/smcroute.in
> > @@ -0,0 +1,12 @@
> > +## SECTION=networking
> > +
> > +config SMCROUTE
> > + tristate
> > + prompt "smcroute "
> > + help
> > + SMCRoute is a daemon and command line tool to manipulate
> > + the multicast routing table in the UNIX kernel.
> > + SMCRoute can be used as an alternative to dynamic multicast
> > + routing daemons like mrouted or pimd when (only) static
> > + multicast routes should be maintained and/or no proper
> > + IGMP signalling exists.
> > diff --git a/rules/smcroute.make b/rules/smcroute.make
> > new file mode 100644
> > index 000000000..11f9dd335
> > --- /dev/null
> > +++ b/rules/smcroute.make
> > @@ -0,0 +1,53 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2018 by Ladislav Michl <ladis@linux-mips.org>
> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_SMCROUTE) += smcroute
> > +
> > +#
> > +# Paths and names
> > +#
> > +SMCROUTE_VERSION := 2.4.0
> > +SMCROUTE_MD5 := 6b4cd5ceb0476c0fbe5c1da093234f13
> > +SMCROUTE := smcroute-$(SMCROUTE_VERSION)
> > +SMCROUTE_SUFFIX := tar.xz
> > +SMCROUTE_URL := \
> > + https://github.com/troglobit/smcroute/releases/download/$(SMCROUTE_VERSION)/$(SMCROUTE).$(SMCROUTE_SUFFIX)
> > +SMCROUTE_SOURCE := $(SRCDIR)/$(SMCROUTE).$(SMCROUTE_SUFFIX)
> > +SMCROUTE_DIR := $(BUILDDIR)/$(SMCROUTE)
> > +SMCROUTE_LICENSE := GPL-2.0+
GPL-2.0-or-later
Michael
> > +
> > +# ----------------------------------------------------------------------------
> > +# Prepare
> > +# ----------------------------------------------------------------------------
> > +
> > +SMCROUTE_CONF_TOOL := autoconf
> > +
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/smcroute.targetinstall:
> > + @$(call targetinfo)
> > +
> > + @$(call install_init, smcroute)
> > + @$(call install_fixup, smcroute,PRIORITY,optional)
> > + @$(call install_fixup, smcroute,SECTION,base)
> > + @$(call install_fixup, smcroute,AUTHOR,"Ladislav Michl <ladis@linux-mips.org>")
> > + @$(call install_fixup, smcroute,DESCRIPTION,missing)
> > +
> > + @$(call install_copy, smcroute, 0, 0, 0755, -, /usr/sbin/smcroutectl)
> > + @$(call install_copy, smcroute, 0, 0, 0755, -, /usr/sbin/smcrouted)
> > +
> > + @$(call install_finish, smcroute)
> > +
> > + @$(call touch)
> > --
> > 2.17.0
> >
> >
> > _______________________________________________
> > ptxdist mailing list
> > ptxdist@pengutronix.de
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
prev parent reply other threads:[~2018-05-17 10:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 16:47 Ladislav Michl
2018-05-08 12:02 ` Michael Olbrich
2018-05-17 10:06 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180517100656.xwmb4clbshv3zcch@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox