[ptxdist] fwd: DistroKit not working for BeagleCore

[Robert Schwebel <r.schwebel@pengutronix.de>]

----- Forwarded message from ptxdist-bounces@pengutronix.de -----

Date: Thu, 22 Mar 2018 15:12:24 +0100
From: ptxdist-bounces@pengutronix.de
To: ptxdist-owner@pengutronix.de
Subject: Auto-discard notification
Message-ID: <mailman.49.1521727944.758.ptxdist@pengutronix.de>

The attached message has been automatically discarded.

Date: Thu, 22 Mar 2018 14:12:21 +0000
From: Benedikt.Wiesnet@rehau.com
To: ptxdist@pengutronix.de
Subject: DistroKit not working for BeagleCore
Message-ID: <24378802-ADF9-4060-9ACF-10CEF12E1C82@rehau.com>
X-Mailer: Lotus Notes Release 8.5.1FP1 January 05, 2010

Hi *,

 

I wanted to feel the power of ptxdist and tried to build an image for
beaglecore (which is a beaglebone black) with DistroKit-2018.03.0 and
OSELAS.Toolchain-2016.06.1/arm-v7a-linux-gnueabihf Toolchain.

 

Unfortunately nothing is really working. The Boot Process is stopping here:

 

barebox 2018.01.0-20180128-1 #1 Thu Mar 22 13:13:28 UTC 2018

Board: TI AM335x BeagleBone black

detected 'BeagleBone Black'

cpsw 4a100000.ethernet: detected phy mask 0x1

mdio_bus: miibus0: probed

eth0: got preset MAC address: b0:d5:cc:cb:83:00

cpsw 4a100000.ethernet: Failed to setup slave 1: I/O error

am335x-phy-driver 47401300.usb-phy: am_usbphy 8ffa9528 enabled

musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO
Rx, HB-ISO Tx, SoftConn)

musb-hdrc: MHDRC RTL version 2.0

musb-hdrc: setup fifo_mode 4

musb-hdrc: 28/31 max ep, 16384/16384 memory

am335x-phy-driver 47401b00.usb-phy: am_usbphy 8ffaaa88 enabled

musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO
Rx, HB-ISO Tx, SoftConn)

musb-hdrc: MHDRC RTL version 2.0

musb-hdrc: setup fifo_mode 4

musb-hdrc: 28/31 max ep, 16384/16384 memory

i2c-omap 44e0b000.i2c: bus 0 rev0.11 at 400 kHz

omap-hsmmc 48060000.mmc: registered as 48060000.mmc

mmc0: detected SD card version 2.0

mmc0: registered mmc0

omap-hsmmc 481d8000.mmc: registered as 481d8000.mmc

mmc1: detected MMC card version 4.5

mmc1: registered mmc1

netconsole: registered as netconsole-1

malloc space: 0x8fefeee0 -> 0x9fdfddbf (size 255 MiB)

environment load /mnt/mmc0.0/barebox.env: No such file or directory

Maybe you have to create the partition.

running /env/bin/init...

[?25hchanging USB current limit to 1300 mA... done

 

Hit m for menu or any other key to stop autoboot:    3       2       1       0

bootchooser: Target list $global.bootchooser.targets is empty

Nothing bootable found on 'bootchooser'

booting 'net'

ip_route_get: No such file or directory

could not open /mnt/tftp/none-linux-generic: No route to host

Booting 'net' failed: No route to host

booting 'net' failed: No route to host

boot: No route to host

 

type exit to get to the menu

[1;32mbarebox@[1;36mTI AM335x BeagleBone black:

 

 

When trying to boot manually with (global.bootm.image=/mnt/mmc0.1/boot/zImage,
global.bootm.oftree=/mnt/mmc0.1/boot/am335x-boneblack.dtb):

 

Loading ARM Linux zImage '/mnt/mmc0.1/boot/zImage'

Loading devicetree from '/mnt/mmc0.1/boot/am335x-boneblack.dtb'

commandline: console=ttyO0,115200 console=ttyO0,115200n8  root=/dev/nfs nfsroot
=/home/none/nfsroot/generic,v3,tcp loglevel=5 systemd.log_level=warning
systemd.show_status=auto

[    0.003601] timer_probe: no matching timers found

[    0.245969] omap_hwmod: debugss: _wait_target_disable failed

[    0.533505] hw perfevents: no interrupt-affinity property for /pmu,
guessing.

[    0.836376] omap_voltage_late_init: Voltage driver support not added

[    0.871536] mmc0: host does not support reading read-only switch, assuming
write-enable

[    0.915997] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000
KHz

[    0.924074] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency
changed to: 600000 KHz

[    0.935105] Root-NFS: no NFS server address

[    0.940012] VFS: Unable to mount root fs via NFS, trying floppy.

[    0.949346] VFS: Cannot open root device "nfs" or unknown-block(2,0): error
-6

[    0.956876] Please append a correct "root=" boot option; here are the
available partitions:

[    0.965846] b300        15558144 mmcblk0

[    0.965855]  driver: mmcblk

[    0.973123]   b301           32768 mmcblk0p1 abe26147-01

[    0.973130]

[    0.980386]   b302          524288 mmcblk0p2 abe26147-02

[    0.980392]

[    0.987474]   b303          524288 mmcblk0p3 abe26147-03

[    0.987479]

[    0.994764] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)

 

Does anybody know how to get this DEMO Case working?

 

Regards

 

Benedikt

 


━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

_______________________________________________________________________

REHAU AG + Co, Kommanditgesellschaft;
Persoenlich haftende Gesellschafterin: Helmut Wagner AG 3074 Muri b. Bern,
Schweiz;
Praesident des Verwaltungsrats: Helmut Wagner, HR Bern CHE-107.882.879;
Sitz der Gesellschaft: Rehau;
Registergericht: Hof, HRA 2232


----- End forwarded message -----

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de