[ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration

mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed

* [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration
@ 2017-10-25 20:57 Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 2/7] qpdf: new package: PDF inspection library and tools Roland Hieber
                   ` (6 more replies)
  0 siblings, 7 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - libpaper.make: ifeq -> ifdef

 patches/libpaper-1.1.24+nmu5/autogen.sh |  2 +
 rules/libpaper.in                       | 38 ++++++++++++++++++
 rules/libpaper.make                     | 69 +++++++++++++++++++++++++++++++++
 3 files changed, 109 insertions(+)
 create mode 100755 patches/libpaper-1.1.24+nmu5/autogen.sh
 create mode 100644 rules/libpaper.in
 create mode 100644 rules/libpaper.make

diff --git a/patches/libpaper-1.1.24+nmu5/autogen.sh b/patches/libpaper-1.1.24+nmu5/autogen.sh
new file mode 100755
index 000000000..5d4c48990
--- /dev/null
+++ b/patches/libpaper-1.1.24+nmu5/autogen.sh
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec autoreconf --install
diff --git a/rules/libpaper.in b/rules/libpaper.in
new file mode 100644
index 000000000..b70c1000b
--- /dev/null
+++ b/rules/libpaper.in
@@ -0,0 +1,38 @@
+## SECTION=multimedia_libs
+
+menuconfig LIBPAPER
+	tristate
+	prompt "libpaper                      "
+	select HOST_AUTOTOOLS_AUTOCONF
+	select HOST_AUTOTOOLS_LIBTOOL
+	help
+	  System-wide paper size configuration
+
+if LIBPAPER
+
+config LIBPAPER_SIZE
+	string "default fallback paper size"
+	default "letter"
+	help
+	  Paper size that is used if nothing else is specified in
+	  /etc/papersize. Currently libpaper knows about the following formats:
+
+	  10x14 11x17 Comm10 DL Monarch a0 a1 a10 a2 a3 a4 a5 a6 a7 a8 a9 archA
+	  archB archC archD archE b0 b1 b10 b2 b3 b4 b5 b6 b7 b8 b9 c2 c3 c4 c5
+	  c6 c7 c8 csheet dsheet esheet executive flsa flse folio halfexecutive
+	  halfletter ledger legal letter note quarto statement tabloid
+
+config LIBPAPER_PAPERCONFIG
+	bool "install paperconfig"
+	help
+	  Install the paperconfig tool which sets the default paper size of the
+	  system
+
+config LIBPAPER_PAPERCONF
+	bool "install paperconf"
+	help
+	  Install the paperconf tool which prints information about a specific
+	  paper size
+
+endif
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/libpaper.make b/rules/libpaper.make
new file mode 100644
index 000000000..c3bf16b0a
--- /dev/null
+++ b/rules/libpaper.make
@@ -0,0 +1,69 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LIBPAPER) += libpaper
+
+#
+# Paths and names
+#
+# libpaper seems to be maintained only as a Debian package, therefore the
+# unusual versioning.
+#
+LIBPAPER_VERSION	:= 1.1.24+nmu5
+LIBPAPER_MD5		:= 38bc55688c0fc5544edaa5a951a45fbd
+LIBPAPER		:= libpaper-$(LIBPAPER_VERSION)
+LIBPAPER_SUFFIX		:= tar.gz
+LIBPAPER_URL		:= http://snapshot.debian.org/archive/debian-debug/20161113T151229Z/pool/main/libp/libpaper/libpaper_$(LIBPAPER_VERSION).$(LIBPAPER_SUFFIX)
+LIBPAPER_SOURCE		:= $(SRCDIR)/$(LIBPAPER).$(LIBPAPER_SUFFIX)
+LIBPAPER_DIR		:= $(BUILDDIR)/$(LIBPAPER)
+LIBPAPER_LICENSE	:= GPL-2.0
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+LIBPAPER_CONF_ENV	:= \
+	$(CROSS_ENV) \
+	PAPERSIZE=$(PTXCONF_LIBPAPER_SIZE)
+#
+# autoconf
+#
+LIBPAPER_CONF_TOOL := autoconf
+#
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/libpaper.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, libpaper)
+	@$(call install_fixup, libpaper,PRIORITY,optional)
+	@$(call install_fixup, libpaper,SECTION,base)
+	@$(call install_fixup, libpaper,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+	@$(call install_fixup, libpaper,DESCRIPTION,missing)
+
+	@$(call install_lib, libpaper, 0, 0, 0755, libpaper)
+
+ifdef PTXCONF_LIBPAPER_PAPERCONFIG
+	@$(call install_copy, libpaper, 0, 0, 755, -, /usr/sbin/paperconfig)
+endif
+ifdef PTXCONF_LIBPAPER_PAPERCONF
+	@$(call install_copy, libpaper, 0, 0, 755, -, /usr/bin/paperconf)
+endif
+
+	@$(call install_finish, libpaper)
+
+	@$(call touch)
+
+# vim: ft=make ts=8 noet tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 2/7] qpdf: new package: PDF inspection library and tools
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 3/7] poppler-data: new package: optional encoding data for poppler Roland Hieber
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - remove unused clean stage template

 ...Remove-libjpeg-dependency-from-pkg-config.patch | 40 ++++++++++
 patches/qpdf-7.0.0/series                          |  4 +
 rules/qpdf.in                                      | 22 ++++++
 rules/qpdf.make                                    | 87 ++++++++++++++++++++++
 4 files changed, 153 insertions(+)
 create mode 100644 patches/qpdf-7.0.0/0001-Remove-libjpeg-dependency-from-pkg-config.patch
 create mode 100644 patches/qpdf-7.0.0/series
 create mode 100644 rules/qpdf.in
 create mode 100644 rules/qpdf.make

diff --git a/patches/qpdf-7.0.0/0001-Remove-libjpeg-dependency-from-pkg-config.patch b/patches/qpdf-7.0.0/0001-Remove-libjpeg-dependency-from-pkg-config.patch
new file mode 100644
index 000000000..7255159a1
--- /dev/null
+++ b/patches/qpdf-7.0.0/0001-Remove-libjpeg-dependency-from-pkg-config.patch
@@ -0,0 +1,40 @@
+From: Roland Hieber <r.hieber@pengutronix.de>
+Date: Mon, 25 Sep 2017 13:01:04 +0200
+Subject: [PATCH] Remove libjpeg dependency from pkg-config
+
+I'm linking QPDF with the original libjpeg-9a from http://ijg.org. This
+works well. But when I then compile cups-filters with QPDF support,
+cups-filters' configure is confused about it, because libjpeg does not
+ship pkg-config definitions:
+
+	[...]
+	checking for ZLIB... yes
+	checking for LIBQPDF... no
+	configure: error: Package requirements (libqpdf >= 3.0.2) were not met:
+
+	Package 'libjpeg', required by 'libqpdf', not found
+
+	Consider adjusting the PKG_CONFIG_PATH environment variable if you
+	installed software in a non-standard prefix.
+
+We cannot solve this problem in QPDF, so just remove the libjpeg
+dependency from the Requires.private variable.
+
+Forwarded: https://github.com/qpdf/qpdf/pull/157
+Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
+---
+ libqpdf.pc.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/libqpdf.pc.in b/libqpdf.pc.in
+index d45df49ed73b..8ece48734941 100644
+--- a/libqpdf.pc.in
++++ b/libqpdf.pc.in
+@@ -6,6 +6,6 @@ includedir=@includedir@
+ Name: libqpdf
+ Description: PDF transformation library
+ Version: @PACKAGE_VERSION@
+-Requires.private: zlib, libjpeg
++Requires.private: zlib
+ Libs: -L${libdir} -lqpdf
+ Cflags: -I${includedir}
diff --git a/patches/qpdf-7.0.0/series b/patches/qpdf-7.0.0/series
new file mode 100644
index 000000000..0de60c199
--- /dev/null
+++ b/patches/qpdf-7.0.0/series
@@ -0,0 +1,4 @@
+# generated by git-ptx-patches
+#tag:base --start-number 1
+0001-Remove-libjpeg-dependency-from-pkg-config.patch
+# c373cfc66b49ecd3549c751d0c0febbe  - git-ptx-patches magic
diff --git a/rules/qpdf.in b/rules/qpdf.in
new file mode 100644
index 000000000..387e49166
--- /dev/null
+++ b/rules/qpdf.in
@@ -0,0 +1,22 @@
+## SECTION=system_libraries
+
+menuconfig QPDF
+	tristate
+	prompt "qpdf                          "
+
+	select LIBJPEG
+	select ZLIB
+
+	help
+	  QPDF is a library that can be used to linearize (web-optimize),
+	  encrypt (password-protect), decrypt, and inspect PDF files.
+
+if QPDF
+
+config QPDF_TOOLS
+	bool "install tools"
+	help
+	  Install the tools. Those include qpdf, zlib-flate, and fix-qdf.
+
+endif
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/qpdf.make b/rules/qpdf.make
new file mode 100644
index 000000000..3d9b4511b
--- /dev/null
+++ b/rules/qpdf.make
@@ -0,0 +1,87 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_QPDF) += qpdf
+
+#
+# Paths and names
+#
+QPDF_VERSION	:= 7.0.0
+QPDF_MD5	:= c3ff408f69b3a6b2b3b4c8b373b2600c
+QPDF		:= qpdf-$(QPDF_VERSION)
+QPDF_SUFFIX	:= tar.gz
+QPDF_URL	:= $(call ptx/mirror, SF, /qpdf/qpdf/$(QPDF_VERSION)/$(QPDF).$(QPDF_SUFFIX))
+QPDF_SOURCE	:= $(SRCDIR)/$(QPDF).$(QPDF_SUFFIX)
+QPDF_DIR	:= $(BUILDDIR)/$(QPDF)
+QPDF_LICENSE	:= Artistic-2.0
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+# We emulate --enable-external-libs as minimally as possible
+QPDF_CONF_ENV	:= \
+	$(CROSS_ENV) \
+	LIBS="-lz -ljpeg"
+
+#
+# autoconf
+#
+# Note: --with-random sets RANDOM_SOURCE, which is not used at all when
+# --enable-insecure-random is given. Nevertheless, autoconf will try to
+# autodetect whether /dev/urandom exists, which fails when cross-compiling.
+QPDF_CONF_TOOL	:= autoconf
+QPDF_CONF_OPT	:= \
+	$(CROSS_AUTOCONF_USR) \
+	--disable-static \
+	--enable-libtool-lock \
+	--disable-insecure-random \
+	--enable-os-secure-random \
+	--disable-external-libs \
+	$(GLOBAL_LARGE_FILE_OPTION) \
+	--disable-werror \
+	--disable-test-compare-images \
+	--disable-show-failed-test-output \
+	--disable-doc-maintenance \
+	--disable-html-doc \
+	--disable-pdf-doc \
+	--disable-validate-doc \
+	--with-random=/dev/urandom \
+	--with-buildrules=libtool
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qpdf.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, qpdf)
+	@$(call install_fixup, qpdf,PRIORITY,optional)
+	@$(call install_fixup, qpdf,SECTION,base)
+	@$(call install_fixup, qpdf,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+	@$(call install_fixup, qpdf,DESCRIPTION,missing)
+
+	@$(call install_lib, qpdf, 0, 0, 0755, libqpdf)
+
+ifdef PTXCONF_QPDF_TOOLS
+	@$(call install_copy, qpdf, 0, 0, 0755, -, /usr/bin/qpdf)
+	@$(call install_copy, qpdf, 0, 0, 0755, -, /usr/bin/fix-qdf)
+	@$(call install_copy, qpdf, 0, 0, 0755, -, /usr/bin/zlib-flate)
+endif
+
+	@$(call install_finish, qpdf)
+
+	@$(call touch)
+
+# vim: ft=make ts=8 tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 3/7] poppler-data: new package: optional encoding data for poppler
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 2/7] qpdf: new package: PDF inspection library and tools Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0 Roland Hieber
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    (no changes in v2 -> v3)

 rules/poppler-data.in   | 10 +++++++++
 rules/poppler-data.make | 58 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+)
 create mode 100644 rules/poppler-data.in
 create mode 100644 rules/poppler-data.make

diff --git a/rules/poppler-data.in b/rules/poppler-data.in
new file mode 100644
index 000000000..61796949e
--- /dev/null
+++ b/rules/poppler-data.in
@@ -0,0 +1,10 @@
+## SECTION=multimedia_gtk
+
+config POPPLER_DATA
+	tristate
+	prompt "poppler-data"
+	help
+	  Encoding data which enables poppler to correctly render CJK and
+	  Cyrillic languages.
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/poppler-data.make b/rules/poppler-data.make
new file mode 100644
index 000000000..93edb7cea
--- /dev/null
+++ b/rules/poppler-data.make
@@ -0,0 +1,58 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_POPPLER_DATA) += poppler-data
+
+#
+# Paths and names
+#
+POPPLER_DATA_VERSION	:= 0.4.8
+POPPLER_DATA_MD5	:= 00f8989c804de84af0ba2ea629949980
+POPPLER_DATA		:= poppler-data-$(POPPLER_DATA_VERSION)
+POPPLER_DATA_SUFFIX	:= tar.gz
+POPPLER_DATA_URL	:= https://poppler.freedesktop.org/$(POPPLER_DATA).$(POPPLER_DATA_SUFFIX)
+POPPLER_DATA_SOURCE	:= $(SRCDIR)/$(POPPLER_DATA).$(POPPLER_DATA_SUFFIX)
+POPPLER_DATA_DIR	:= $(BUILDDIR)/$(POPPLER_DATA)
+POPPLER_DATA_LICENSE	:= GPL-2.0 AND MIT AND BSD-3-Clause
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+POPPLER_DATA_CONF_TOOL	:= NO
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+POPPLER_DATA_INSTALL_OPT := prefix=/usr install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/poppler-data.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, poppler-data)
+	@$(call install_fixup, poppler-data,PRIORITY,optional)
+	@$(call install_fixup, poppler-data,SECTION,base)
+	@$(call install_fixup, poppler-data,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+	@$(call install_fixup, poppler-data,DESCRIPTION,missing)
+
+	@$(call install_tree, poppler-data, 0, 0, -, /usr/share/poppler)
+
+	@$(call install_finish, poppler-data)
+
+	@$(call touch)
+
+# vim: ft=make ts=8 tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 2/7] qpdf: new package: PDF inspection library and tools Roland Hieber
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 3/7] poppler-data: new package: optional encoding data for poppler Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-10-25 21:15   ` Roland Hieber
  2017-10-28  9:46   ` Michael Olbrich
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System Roland Hieber
                   ` (3 subsequent siblings)
  6 siblings, 2 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

This is quite a version bump, spanning six years of poppler development.
Upstream now provides data for rendering cyrillic languages in the
package poppler-data, but this dependency is only detected at compile
time, so we make sure the build order is right.

Some applications require the old xpdf headers, the CPP wrapper or CMYK
support, so make these configure options selectable. Same for the Splash
backend, which can now also be built with single precision or
fixed-point arithmetic. PNG and JPEG support is no longer broken,
poppler now also includes an internal DCT decoder. The GTK dependency
has been dropped (or was it even necessary in the first place?)

Don't wonder about --disable-relocatable, it only applies to Windows.

poppler allows using zlib to uncompress flate streams, but with the
warning that this is "not totally safe", so I disabled it.

Additionally, poppler could benefit from packaging libopenjpeg and
libtiff in ptxdist for parsing JPEG2000 or TIFF embedded in PDFs.
Likewise, libnss could be packaged for PDF signature support.  Also
there is the option to build a Qt5 wrapper, but this is currently only
build-tested and needs to be tested in runtime.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - POPPLER_GLIB also needs HOST_GLIB for sysroot-host/bin/glib-mkenums
     - add optional dependency for gobject-introspection
     - add POPPLER_OPENJPEG, POPPLER_TIFF, POPPLER_NSS with depends on
       BROKEN for future use
     - respect PTXCONF_TARGET_DEBUG_* instead of introducing an extra
       POPPLER_BUILD_DEBUG
     - enable qt5 wrapper (only build-tested)
     - order kconfig options by usage and add section headers for more
       structure

 rules/poppler.in   | 138 ++++++++++++++++++++++++++++++++++++++++++++---------
 rules/poppler.make |  56 ++++++++++++++++------
 2 files changed, 156 insertions(+), 38 deletions(-)

diff --git a/rules/poppler.in b/rules/poppler.in
index b107dc7a5..3a74ead41 100644
--- a/rules/poppler.in
+++ b/rules/poppler.in
@@ -4,23 +4,33 @@ menuconfig POPPLER
 	tristate
 	prompt "poppler                       "
 	select FONTCONFIG
+	select FREETYPE
 	select HOST_GETTEXT
-	select GLIB		if POPPLER_GLIB
-	select LIBPNG		if POPPLER_PNG
-	select LIBJPEG		if POPPLER_JPEG
-	select CAIRO		if POPPLER_CAIRO
-	select GTK		if POPPLER_SPLASH && POPPLER_GLIB
-	select ZLIB		if POPPLER_ZLIB
-	select LIBCURL		if POPPLER_CURL
-	select LCMS		if POPPLER_CMS
-	select QT4		if POPPLER_QT4
-	select QT4_BUILD_GUI	if POPPLER_QT4
-	select QT4_BUILD_XML	if POPPLER_QT4
+	select POPPLER_DATA			if POPPLER_WITH_DATA
+	select GLIB				if POPPLER_GLIB
+	select HOST_GLIB			if POPPLER_GLIB
+	select GOBJECT_INTROSPECTION_HELPER	if POPPLER_GOI
+	select GOBJECT_INTROSPECTION		if POPPLER_GOI
+	select LIBPNG				if POPPLER_PNG
+	select LIBJPEG				if POPPLER_JPEG
+	select CAIRO				if POPPLER_CAIRO
+	select CAIRO_FREETYPE			if POPPLER_CAIRO
+	select ZLIB				if POPPLER_ZLIB
+	select LIBCURL				if POPPLER_CURL
+	select LCMS				if POPPLER_CMS
+	select QT4				if POPPLER_QT4
+	select QT4_BUILD_GUI			if POPPLER_QT4
+	select QT4_BUILD_XML			if POPPLER_QT4
+	select QT4_BUILD_QTESTLIB		if POPPLER_QT4
+	select QT5				if POPPLER_QT5
+	select QT5_MODULE_QTBASE		if POPPLER_QT5
 	help
 	  Poppler is a PDF rendering library based on the xpdf-3.0 code base.
 
 if POPPLER
 
+comment "--- Install components ---"
+
 config POPPLER_BIN
 	bool
 	prompt "install poppler utilities"
@@ -29,6 +39,26 @@ config POPPLER_BIN
 	  pdffonts, pdfimages, pdfinfo, pdftoabw, pdftohtml, pdftoppm, pdftops,
 	  pdftotext.
 
+config POPPLER_XPDF
+	bool
+	prompt "install unsupported xpdf headers"
+	help
+	  Install XPDF headers for software that still depends on them.
+	  Normally, this option should not be needed.
+
+config POPPLER_WITH_DATA
+	bool
+	prompt "install poppler-data"
+	help
+	  poppler-data contains the encoding files which enable poppler to
+	  correctly render CJK and Cyrillic.
+
+comment "--- Wrappers ---"
+
+config POPPLER_CPP
+	bool
+	prompt "enable poppler cpp wrapper"
+
 config POPPLER_GLIB
 	select POPPLER_CAIRO
 	bool
@@ -36,20 +66,37 @@ config POPPLER_GLIB
 	help
 	  build poppler glib wrapper.
 
+config POPPLER_GOI
+	select POPPLER_GLIB
+	bool
+	prompt "enable GObject introspection"
+	help
+	  build GObject introspection data for poppler. You may also want to
+	  select GOBJECT_INTROSPECTION if you want to use that on the target,
+	  but it's not a hard dependency for generating the data for poppler.
+
 config POPPLER_QT4
 	bool
 	prompt "enable poppler Qt4 wrapper"
 	help
 	  build poppler Qt4 wrapper.
 
-comment "least one graphics backend should be selected"
-	depends on !(POPPLER_CAIRO || POPPLER_SPLASH)
+config POPPLER_QT5
+	bool
+	prompt "enable poppler Qt5 wrapper"
+	help
+	  build poppler Qt5 wrapper.
+
+comment "--- Backends ---"
+
+comment "at least one graphics backend should be selected"
+	depends on !(POPPLER_CAIRO || POPPLER_SPLASH || POPPLER_QT4)
 
 config POPPLER_CAIRO
 	bool
 	prompt "enable poppler cairo graphics backend"
 	help
-	  built cairo graphics backend
+	  build cairo graphics backend
 
 config POPPLER_SPLASH
 	bool
@@ -57,37 +104,82 @@ config POPPLER_SPLASH
 	help
 	  build splash graphics backend
 
+config POPPLER_SPLASH_SINGLE
+	bool
+	prompt "use single precision float arithmetic"
+	default n if HAS_HARDFLOAT
+	depends on POPPLER_SPLASH
+	help
+	  Use single precision instead of double precision floating point
+	  arithmetic in Splash backend
+
+config POPPLER_SPLASH_FIXED
+	bool
+	prompt "use fixed point arithmetic"
+	default n if HAS_HARDFLOAT
+	depends on POPPLER_SPLASH
+	depends on !POPPLER_SPLASH_SINGLE
+	help
+	  If enabled, the Splash backend will use floating point operations
+	  instead of fixed-point arithmetic.
+
+comment "--- Features --- "
+
+config POPPLER_CMYK
+	bool
+	prompt "enable poppler CMYK raster support"
+
 config POPPLER_PNG
 	bool
-	# fails to build with the current libpng
-	depends on BROKEN
 	prompt "enable poppler png support"
 	help
-	  compiles poppler with png support.
+	  compile poppler with png support via libpng
 
 config POPPLER_JPEG
 	bool
-	depends on BROKEN
 	prompt "enable poppler jpeg support"
 	help
-	  compiles poppler with jpeg support.
+	  compile poppler with jpeg support via libjpeg
+
+config POPPLER_OPENJPEG
+	bool
+	depends on BROKEN
+	prompt "enable poppler jpeg2000 support"
+	help
+	  compile poppler with jpeg2000 (JPX) support via libopenjpeg
+
+config POPPLER_TIFF
+	bool
+	depends on BROKEN
+	prompt "enable poppler tiff support"
+	help
+	  compile poppler with support for TIFF via libtiff
+
+config POPPLER_NSS
+	bool
+	depends on BROKEN
+	prompt "enable poppler nss support"
+	help
+	  compile poppler with support for signed PDFs via libnss
 
 config POPPLER_ZLIB
 	bool
 	prompt "enable poppler zlib support"
 	help
-	  compiles poppler with zlib support.
+	  compile poppler with zlib support.
 
 config POPPLER_CURL
 	bool
 	prompt "enable poppler curl support"
 	help
-	  compiles poppler with curl support.
+	  compile poppler with libcurl support.
 
 config POPPLER_CMS
 	bool
-	prompt "enable poppler cms support"
+	prompt "enable poppler color management support"
 	help
-	  compiles poppler with color management system support.
+	  compile poppler with color management support via libcms1
 
 endif
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/poppler.make b/rules/poppler.make
index 7ac676bf1..ba55162e5 100644
--- a/rules/poppler.make
+++ b/rules/poppler.make
@@ -2,13 +2,19 @@
 #
 # Copyright (C) 2007 by Luotao Fu <l.fu@pengutronix.de>
 #               2009 by Robert Schwebel
+#               2017 by Roland Hieber <r.hieber@pengutronix.de>
 #
 # See CREDITS for details about who has contributed to this project.
 #
 # For further information about the PTXdist project and license conditions
 # see the README file.
 #
-
+# TODOs for improvement:
+# - package libnss for signature support in PDFs
+# - package libtiff for additional TIFF support
+# - runtime-test the Qt5 backend
+# - package libopenjpeg and build with --enable-libopenjpeg
+# - update lcms to lcms2 and use --enable-cms=lcms2
 #
 # We provide this package
 #
@@ -17,10 +23,10 @@ PACKAGES-$(PTXCONF_POPPLER) += poppler
 #
 # Paths and names
 #
-POPPLER_VERSION	:= 0.18.0
-POPPLER_MD5	:= 4cd3bf2a0a13fa8eaf00d31368915f77
+POPPLER_VERSION	:= 0.59.0
+POPPLER_MD5	:= 6e44408a3b4f4a738f8a6770d0aea8a5
 POPPLER		:= poppler-$(POPPLER_VERSION)
-POPPLER_SUFFIX	:= tar.gz
+POPPLER_SUFFIX	:= tar.xz
 POPPLER_URL	:= http://poppler.freedesktop.org/$(POPPLER).$(POPPLER_SUFFIX)
 POPPLER_SOURCE	:= $(SRCDIR)/$(POPPLER).$(POPPLER_SUFFIX)
 POPPLER_DIR	:= $(BUILDDIR)/$(POPPLER)
@@ -35,34 +41,51 @@ POPPLER_ENV 	:= $(CROSS_ENV)
 #
 # autoconf
 #
-POPPLER_AUTOCONF := \
+POPPLER_CONF_TOOL := autoconf
+POPPLER_CONF_OPT := \
 	$(CROSS_AUTOCONF_USR) \
+	--enable-option-checking \
+	--disable-silent-rules \
+	--disable-dependency-tracking \
+	--enable-shared \
+	--enable-fast-install \
+	--enable-libtool-lock \
+	--$(call ptx/endis, PTXCONF_POPPLER_XPDF)-xpdf-headers \
+	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_OFF,--enable-build-type=release,) \
+	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_KEEP,--enable-build-type=release,) \
+	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_ENABLE,--enable-build-type=debug,) \
+	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_FULL,--enable-build-type=debugfull,) \
+	--$(call ptx/endis, PTXCONF_POPPLER_SINGLE)-single-precision \
+	--$(call ptx/endis, PTXCONF_POPPLER_FIXED)-fixedpoint \
+	--$(call ptx/endis, PTXCONF_POPPLER_CMYK)-cmyk \
+	--disable-relocatable \
+	--enable-libopenjpeg=$(call ptx/ifdef,PTXCONF_POPPLER_OPENJPEG,openjpeg2,none) \
+	--$(call ptx/endis, PTXCONF_POPPLER_NSS)-libnss \
+	--$(call ptx/endis, PTXCONF_POPPLER_TIFF)-libtiff \
 	$(GLOBAL_LARGE_FILE_OPTION) \
-	--disable-xpdf-headers \
-	--$(call ptx/disen, PTXCONF_HAS_HARDFLOAT)-single-precision \
-	--disable-fixedpoint \
-	--disable-libopenjpeg \
-	--disable-libtiff \
 	--$(call ptx/endis, PTXCONF_POPPLER_ZLIB)-zlib \
+	--disable-zlib-uncompress \
 	--$(call ptx/endis, PTXCONF_POPPLER_CURL)-libcurl \
-	--$(call ptx/endis, PTXCONF_POPPLER_JPEG)-libjpeg \
+	--enable-dctdecoder=$(call ptx/ifdef,PTXCONF_POPPLER_JPEG,libjpeg,none) \
 	--$(call ptx/endis, PTXCONF_POPPLER_PNG)-libpng \
 	--$(call ptx/endis, PTXCONF_POPPLER_SPLASH)-splash-output \
 	--$(call ptx/endis, PTXCONF_POPPLER_CAIRO)-cairo-output \
 	--$(call ptx/endis, PTXCONF_POPPLER_GLIB)-poppler-glib \
-	--disable-introspection \
+	--$(call ptx/endis, PTXCONF_POPPLER_GOI)-introspection \
 	--disable-gtk-doc \
 	--disable-gtk-doc-html \
 	--disable-gtk-doc-pdf \
 	--$(call ptx/endis, PTXCONF_POPPLER_QT4)-poppler-qt4 \
-	--disable-poppler-cpp \
+	--disable-poppler-qt5 \
+	--$(call ptx/endis, PTXCONF_POPPLER_CPP)-poppler-cpp \
 	--disable-gtk-test \
 	--$(call ptx/endis, PTXCONF_POPPLER_BIN)-utils \
 	--disable-compile-warnings \
-	--$(call ptx/endis, PTXCONF_POPPLER_CMS)-cms \
+	--enable-cms=$(call ptx/ifdef,PTXCONF_POPPLER_CMS,lcms1,no) \
 	--without-x \
 	--with-font-configuration=fontconfig \
-	--without-libiconv-prefix
+	--without-libiconv-prefix \
+	--with-testdatadir=
 
 # ----------------------------------------------------------------------------
 # Target-Install
@@ -85,6 +108,9 @@ ifdef PTXCONF_POPPLER_BIN
 		$(call install_copy, poppler, 0, 0, 0755, -, /usr/bin/$$i); \
 	done
 endif
+ifdef PTXCONF_POPPLER_CPP
+	@$(call install_lib, poppler, 0, 0, 0644, libpoppler-cpp)
+endif
 ifdef PTXCONF_POPPLER_GLIB
 	@$(call install_lib, poppler, 0, 0, 0644, libpoppler-glib)
 endif
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
                   ` (2 preceding siblings ...)
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0 Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-10-27 17:54   ` Michael Olbrich
  2017-10-28  9:54   ` Michael Olbrich
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools Roland Hieber
                   ` (2 subsequent siblings)
  6 siblings, 2 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

If using systemd, CUPS can be started via socket activation or directly,
in any case it is run as user daemon, group lp. The default spool and
cache locations were moved to /tmp/cups so we don't need to set up a
tmpfs for /var/spool/cups and /var/cache/cups.

sysvinit script is installed from upstream, but untested.

Some config files are only created by cupsd on the first start and not
at install time, so we supply reasonable defaults in projectroot/ in
order to use $(call install_alternative...) on them.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - version bump 2.2.4 -> 2.2.5
     - fix SPDX license identifiers
     - $(PKGDIR)/$(CUPS) -> $(CUPS_PKGDIR)
     - with CROSS_AUTOCONF_USR, --exec-prefix and --libdir is not needed
     - always build multithreaded, remove kconfig option
     - remove debugging options, can easily be enabled by creating a local
       rules/cups-debug.make
     - fix install_copy for /etc/cups/ssl (missing permissions)

 ...llow-explicit-disabling-of-Java-PHP-Perl-.patch |  92 ++++++++
 ...-remove-leftover-check-for-empty-CUPS_PHP.patch |  29 +++
 ...e-make-interpreter-detection-more-verbose.patch |  88 ++++++++
 patches/cups-2.2.4/autogen.sh                      |   7 +
 patches/cups-2.2.4/series                          |   6 +
 projectroot/etc/cups/classes.conf                  |   1 +
 projectroot/etc/cups/client.conf                   |   2 +
 projectroot/etc/cups/cups-files.conf               |  22 ++
 projectroot/etc/cups/mailto.conf                   |   1 +
 projectroot/etc/cups/ppd/.createdirectory          |   0
 projectroot/etc/cups/printers.conf                 |   1 +
 projectroot/etc/cups/ssl/.createdirectory          |   0
 projectroot/etc/printcap                           |   3 +
 projectroot/usr/lib/systemd/system/cups.service    |  15 ++
 projectroot/usr/lib/systemd/system/cups.socket     |  14 ++
 projectroot/usr/lib/tmpfiles.d/cups.conf           |   6 +
 rules/cups-bbinit.in                               |   8 +
 rules/cups.in                                      | 113 ++++++++++
 rules/cups.make                                    | 238 +++++++++++++++++++++
 19 files changed, 646 insertions(+)
 create mode 100644 patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
 create mode 100644 patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
 create mode 100644 patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
 create mode 100755 patches/cups-2.2.4/autogen.sh
 create mode 100644 patches/cups-2.2.4/series
 create mode 100644 projectroot/etc/cups/classes.conf
 create mode 100644 projectroot/etc/cups/client.conf
 create mode 100644 projectroot/etc/cups/cups-files.conf
 create mode 100644 projectroot/etc/cups/mailto.conf
 create mode 100644 projectroot/etc/cups/ppd/.createdirectory
 create mode 100644 projectroot/etc/cups/printers.conf
 create mode 100644 projectroot/etc/cups/ssl/.createdirectory
 create mode 100644 projectroot/etc/printcap
 create mode 100644 projectroot/usr/lib/systemd/system/cups.service
 create mode 100644 projectroot/usr/lib/systemd/system/cups.socket
 create mode 100644 projectroot/usr/lib/tmpfiles.d/cups.conf
 create mode 100644 rules/cups-bbinit.in
 create mode 100644 rules/cups.in
 create mode 100644 rules/cups.make

diff --git a/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
new file mode 100644
index 000000000..f110f5aaa
--- /dev/null
+++ b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
@@ -0,0 +1,92 @@
+From: Roland Hieber <r.hieber@pengutronix.de>
+Date: Mon, 25 Sep 2017 15:00:16 +0200
+Subject: [PATCH] configure: allow explicit disabling of Java/PHP/Perl/Python
+ support
+
+Currently, when configure is called with --with-java or --with-java=,
+auto-detection is performed. When called with --without-java, HAVE_JAVA
+is still being defined. This is unfortunate when cross-compiling for
+embedded systems, we would end up with Java on the host being
+auto-detected (which is not what we have on the target), or with a wrong
+HAVE_JAVA define. We need a way to explicitely disable scripting support
+for all supported languages.
+
+Forwarded: https://github.com/apple/cups/pull/5122
+Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
+---
+ config-scripts/cups-scripting.m4 | 24 ++++++++++++++++--------
+ 1 file changed, 16 insertions(+), 8 deletions(-)
+
+diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
+index bff3e9a0505c..137c3be72cb0 100644
+--- a/config-scripts/cups-scripting.m4
++++ b/config-scripts/cups-scripting.m4
+@@ -14,11 +14,13 @@ dnl
+ dnl Do we have Java?
+ AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interfaces ],
+ 	CUPS_JAVA="$withval",
+-	CUPS_JAVA="")
++	CUPS_JAVA="auto")
+ 
+-if test "x$CUPS_JAVA" = x; then
++if test "x$CUPS_JAVA" = xauto; then
+ 	AC_PATH_PROG(JAVA,java)
+ 	CUPS_JAVA="$JAVA"
++elif test "x$CUPS_JAVA" = xno; then
++	CUPS_JAVA=""
+ fi
+ 
+ AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
+@@ -30,11 +32,13 @@ fi
+ dnl Do we have Perl?
+ AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interfaces ],
+ 	CUPS_PERL="$withval",
+-	CUPS_PERL="")
++	CUPS_PERL="auto")
+ 
+-if test "x$CUPS_PERL" = x; then
++if test "x$CUPS_PERL" = xauto; then
+ 	AC_PATH_PROG(PERL,perl)
+ 	CUPS_PERL="$PERL"
++elif test "x$CUPS_PERL" = xno; then
++	CUPS_PERL=""
+ fi
+ 
+ AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
+@@ -46,9 +50,9 @@ fi
+ dnl Do we have PHP?
+ AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfaces ],
+ 	CUPS_PHP="$withval",
+-	CUPS_PHP="")
++	CUPS_PHP="auto")
+ 
+-if test "x$CUPS_PHP" = x; then
++if test "x$CUPS_PHP" = xauto; then
+ 	AC_PATH_PROG(PHPCGI,php-cgi)
+ 	if test "x$PHPCGI" = x; then
+ 		AC_PATH_PROG(PHP,php)
+@@ -56,6 +60,8 @@ if test "x$CUPS_PHP" = x; then
+ 	else
+ 		CUPS_PHP="$PHPCGI"
+ 	fi
++elif test "x$CUPS_PHP" = xno; then
++	CUPS_PHP=""
+ fi
+ 
+ AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
+@@ -69,11 +75,13 @@ fi
+ dnl Do we have Python?
+ AC_ARG_WITH(python, [  --with-python           set Python interpreter for web interfaces ],
+ 	CUPS_PYTHON="$withval",
+-	CUPS_PYTHON="")
++	CUPS_PYTHON="auto")
+ 
+-if test "x$CUPS_PYTHON" = x; then
++if test "x$CUPS_PYTHON" = xauto; then
+ 	AC_PATH_PROG(PYTHON,python)
+ 	CUPS_PYTHON="$PYTHON"
++elif test "x$CUPS_PYTHON" = xno; then
++	CUPS_PYTHON=""
+ fi
+ 
+ AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
diff --git a/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
new file mode 100644
index 000000000..b0b59a78f
--- /dev/null
+++ b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
@@ -0,0 +1,29 @@
+From: Roland Hieber <r.hieber@pengutronix.de>
+Date: Mon, 25 Sep 2017 17:04:49 +0200
+Subject: [PATCH] configure: remove leftover check for empty CUPS_PHP
+
+After the respective AC_DEFINE_UNQUOTED(CUPS_PHP) call, assigning
+anything to CUPS_PHP is a no-op. Remove it so the surrounding test looks
+like the other tests in the file.
+
+Forwarded: https://github.com/apple/cups/pull/5122
+Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
+---
+ config-scripts/cups-scripting.m4 | 4 +---
+ 1 file changed, 1 insertion(+), 3 deletions(-)
+
+diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
+index 137c3be72cb0..f73d5310a3ae 100644
+--- a/config-scripts/cups-scripting.m4
++++ b/config-scripts/cups-scripting.m4
+@@ -66,9 +66,7 @@ fi
+ 
+ AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
+ 
+-if test "x$CUPS_PHP" = x; then
+-	CUPS_PHP="no"
+-else
++if test "x$CUPS_PHP" != x; then
+ 	AC_DEFINE(HAVE_PHP)
+ fi
+ 
diff --git a/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
new file mode 100644
index 000000000..a1bfc3ade
--- /dev/null
+++ b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
@@ -0,0 +1,88 @@
+From: Roland Hieber <r.hieber@pengutronix.de>
+Date: Mon, 25 Sep 2017 16:17:03 +0200
+Subject: [PATCH] configure: make interpreter detection more verbose
+
+Forwarded: https://github.com/apple/cups/pull/5122
+Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
+---
+ config-scripts/cups-scripting.m4 | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
+index f73d5310a3ae..4b1b6a80c5ac 100644
+--- a/config-scripts/cups-scripting.m4
++++ b/config-scripts/cups-scripting.m4
+@@ -16,6 +16,7 @@ AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interf
+ 	CUPS_JAVA="$withval",
+ 	CUPS_JAVA="auto")
+ 
++AC_MSG_CHECKING([for Java interpreter])
+ if test "x$CUPS_JAVA" = xauto; then
+ 	AC_PATH_PROG(JAVA,java)
+ 	CUPS_JAVA="$JAVA"
+@@ -26,7 +27,10 @@ fi
+ AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
+ 
+ if test "x$CUPS_JAVA" != x; then
++	AC_MSG_RESULT([$CUPS_JAVA])
+ 	AC_DEFINE(HAVE_JAVA)
++else
++	AC_MSG_RESULT([none])
+ fi
+ 
+ dnl Do we have Perl?
+@@ -34,6 +38,7 @@ AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interf
+ 	CUPS_PERL="$withval",
+ 	CUPS_PERL="auto")
+ 
++AC_MSG_CHECKING([for Perl interpreter])
+ if test "x$CUPS_PERL" = xauto; then
+ 	AC_PATH_PROG(PERL,perl)
+ 	CUPS_PERL="$PERL"
+@@ -44,7 +49,10 @@ fi
+ AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
+ 
+ if test "x$CUPS_PERL" != x; then
++	AC_MSG_RESULT([$CUPS_PERL])
+ 	AC_DEFINE(HAVE_PERL)
++else
++	AC_MSG_RESULT([none])
+ fi
+ 
+ dnl Do we have PHP?
+@@ -52,6 +60,7 @@ AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfac
+ 	CUPS_PHP="$withval",
+ 	CUPS_PHP="auto")
+ 
++AC_MSG_CHECKING([for PHP interpreter])
+ if test "x$CUPS_PHP" = xauto; then
+ 	AC_PATH_PROG(PHPCGI,php-cgi)
+ 	if test "x$PHPCGI" = x; then
+@@ -67,7 +76,10 @@ fi
+ AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
+ 
+ if test "x$CUPS_PHP" != x; then
++	AC_MSG_RESULT([$CUPS_PHP])
+ 	AC_DEFINE(HAVE_PHP)
++else
++	AC_MSG_RESULT([none])
+ fi
+ 
+ dnl Do we have Python?
+@@ -75,6 +87,7 @@ AC_ARG_WITH(python, [  --with-python           set Python interpreter for web in
+ 	CUPS_PYTHON="$withval",
+ 	CUPS_PYTHON="auto")
+ 
++AC_MSG_CHECKING([for Python interpreter])
+ if test "x$CUPS_PYTHON" = xauto; then
+ 	AC_PATH_PROG(PYTHON,python)
+ 	CUPS_PYTHON="$PYTHON"
+@@ -85,5 +98,8 @@ fi
+ AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
+ 
+ if test "x$CUPS_PYTHON" != x; then
++	AC_MSG_RESULT([$CUPS_PYTHON])
+ 	AC_DEFINE(HAVE_PYTHON)
++else
++	AC_MSG_RESULT([none])
+ fi
diff --git a/patches/cups-2.2.4/autogen.sh b/patches/cups-2.2.4/autogen.sh
new file mode 100755
index 000000000..1c70286be
--- /dev/null
+++ b/patches/cups-2.2.4/autogen.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+autoconf \
+        --force \
+        --warnings=cross \
+        --warnings=syntax \
+        --warnings=obsolete \
+        --warnings=unsupported
diff --git a/patches/cups-2.2.4/series b/patches/cups-2.2.4/series
new file mode 100644
index 000000000..8ed7533f1
--- /dev/null
+++ b/patches/cups-2.2.4/series
@@ -0,0 +1,6 @@
+# generated by git-ptx-patches
+#tag:base --start-number 1
+0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
+0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
+0003-configure-make-interpreter-detection-more-verbose.patch
+# c7ecb5f5cc92f09bc09802d57507070b  - git-ptx-patches magic
diff --git a/projectroot/etc/cups/classes.conf b/projectroot/etc/cups/classes.conf
new file mode 100644
index 000000000..dea737751
--- /dev/null
+++ b/projectroot/etc/cups/classes.conf
@@ -0,0 +1 @@
+# classes.conf - class configuration file for cups
diff --git a/projectroot/etc/cups/client.conf b/projectroot/etc/cups/client.conf
new file mode 100644
index 000000000..f8f0b6832
--- /dev/null
+++ b/projectroot/etc/cups/client.conf
@@ -0,0 +1,2 @@
+# CUPS client configuration
+ServerName localhost
diff --git a/projectroot/etc/cups/cups-files.conf b/projectroot/etc/cups/cups-files.conf
new file mode 100644
index 000000000..2cc2d5a5b
--- /dev/null
+++ b/projectroot/etc/cups/cups-files.conf
@@ -0,0 +1,22 @@
+# File/directory/user/group configuration file for the CUPS scheduler.
+User daemon
+Group lp
+SystemGroup root
+
+AccessLog /var/log/cups/access_log
+ErrorLog /var/log/cups/error_log
+PageLog /var/log/cups/page_log
+
+CacheDir /tmp/cups/cache
+DataDir /usr/share/cups
+DocumentRoot /usr/share/doc/cups
+RequestRoot /tmp/cups/spool
+ServerBin /usr/lib/cups
+ServerRoot /etc/cups
+StateDir /var/run/cups
+
+Printcap /etc/printcap
+PrintcapFormat bsd
+
+# SSL/TLS keychain for the scheduler...
+#ServerKeychain ssl
diff --git a/projectroot/etc/cups/mailto.conf b/projectroot/etc/cups/mailto.conf
new file mode 100644
index 000000000..4502adaee
--- /dev/null
+++ b/projectroot/etc/cups/mailto.conf
@@ -0,0 +1 @@
+# mailto.conf - configuration file for cups email notifier
diff --git a/projectroot/etc/cups/ppd/.createdirectory b/projectroot/etc/cups/ppd/.createdirectory
new file mode 100644
index 000000000..e69de29bb
diff --git a/projectroot/etc/cups/printers.conf b/projectroot/etc/cups/printers.conf
new file mode 100644
index 000000000..bf9879904
--- /dev/null
+++ b/projectroot/etc/cups/printers.conf
@@ -0,0 +1 @@
+# printers.conf - printer configuration file for cups
diff --git a/projectroot/etc/cups/ssl/.createdirectory b/projectroot/etc/cups/ssl/.createdirectory
new file mode 100644
index 000000000..e69de29bb
diff --git a/projectroot/etc/printcap b/projectroot/etc/printcap
new file mode 100644
index 000000000..e74f358e1
--- /dev/null
+++ b/projectroot/etc/printcap
@@ -0,0 +1,3 @@
+# This file was automatically generated by cupsd(8) from the
+# /etc/cups/printers.conf file.  All changes to this file
+# will be lost.
diff --git a/projectroot/usr/lib/systemd/system/cups.service b/projectroot/usr/lib/systemd/system/cups.service
new file mode 100644
index 000000000..ff94f69d2
--- /dev/null
+++ b/projectroot/usr/lib/systemd/system/cups.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=CUPS Scheduler service
+Documentation=man:cupsd(8)
+Requires=systemd-tmpfiles-setup.service
+Requires=cups.socket
+
+[Service]
+User=daemon
+Group=lp
+ExecStart=/usr/sbin/cupsd -l -c /etc/cups/cupsd.conf -s /etc/cups/cups-files.conf
+Type=simple
+
+[Install]
+Also=cups.socket
+WantedBy=printer.target
diff --git a/projectroot/usr/lib/systemd/system/cups.socket b/projectroot/usr/lib/systemd/system/cups.socket
new file mode 100644
index 000000000..de9f43b6b
--- /dev/null
+++ b/projectroot/usr/lib/systemd/system/cups.socket
@@ -0,0 +1,14 @@
+[Unit]
+Description=CUPS Scheduler socket
+PartOf=cups.service
+
+[Socket]
+ListenStream=/run/cups.sock
+ListenStream=[::1]:631
+ListenStream=127.0.0.1:631
+BindIPv6Only=No
+SocketUser=daemon
+SocketGroup=lp
+
+[Install]
+WantedBy=sockets.target
diff --git a/projectroot/usr/lib/tmpfiles.d/cups.conf b/projectroot/usr/lib/tmpfiles.d/cups.conf
new file mode 100644
index 000000000..c000cf255
--- /dev/null
+++ b/projectroot/usr/lib/tmpfiles.d/cups.conf
@@ -0,0 +1,6 @@
+#Type	Path			Mode	UID	GID	Age	Argument
+d	/var/log/cups		750	daemon	lp	-
+d	/tmp/cups/cache/	750	daemon	lp	-
+d	/tmp/cups/spool/	750	daemon	lp	-
+d	/tmp/cups/spool/tmp/	750	daemon	lp	-
+d	/var/run/cups		750	daemon	lp	-
diff --git a/rules/cups-bbinit.in b/rules/cups-bbinit.in
new file mode 100644
index 000000000..86b6f649a
--- /dev/null
+++ b/rules/cups-bbinit.in
@@ -0,0 +1,8 @@
+## SECTION=initmethod_bbinit
+
+config CUPS_BBINIT_LINK
+        string "cups"
+        depends on CUPS_STARTSCRIPT
+        default "S90cups"
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/cups.in b/rules/cups.in
new file mode 100644
index 000000000..13b7142d6
--- /dev/null
+++ b/rules/cups.in
@@ -0,0 +1,113 @@
+## SECTION=applications
+
+menuconfig CUPS
+	tristate
+	prompt "cups                          "
+
+	select ROOTFS_VAR_LOG
+	select ROOTFS_VAR_RUN
+	select LIBC_M
+	select LIBC_CRYPT
+	select ZLIB
+
+	select LIBC_PTHREAD		if CUPS_THREADING
+	select SYSTEMD			if CUPS_SYSTEMD_UNIT
+	select LIBPAPER			if CUPS_LIBPAPER
+	select LIBUSB			if CUPS_LIBUSB
+	select DBUS			if CUPS_DBUS
+	select GNUTLS			if CUPS_SSL
+	select AVAHI			if CUPS_AVAHI
+	select AVAHI_LIBAVAHI_CLIENT	if CUPS_AVAHI
+	select ORACLE_JAVA7_JRE		if CUPS_JAVA
+	select PERL			if CUPS_PERL
+	select PHP5			if CUPS_PHP
+	select PYTHON			if CUPS_PYTHON
+
+	help
+	  CUPS is the standards-based, open source printing system. It uses the
+	  Internet Printing Protocol (IPP) to support printing to local and
+	  network printers.
+
+if CUPS
+
+comment "--- CUPS Features ---"
+
+config CUPS_WEBINTERFACE
+	bool "enable web interface"
+	help
+	   Enable CUPS printer management via HTTP(S). Only required for hosts
+	   which should act as a printing server.
+
+	   If you overwrite the config files for CUPS, be sure to have
+	   "WebInterface Yes" in your projectroot/etc/cups/cupsd.conf.
+
+config CUPS_SYSTEMD_UNIT
+	bool "install systemd unit file"
+	default y
+	depends on INITMETHOD_SYSTEMD
+	help
+	  Installs a systemd service file so that CUPS can be started as a
+	  systemd service.
+
+config CUPS_STARTSCRIPT
+	bool "install init.d script"
+	depends on INITMETHOD_BBINIT
+	help
+	  Install /etc/init.d/cups
+
+config CUPS_TEST_TOOLS
+	bool "install cupstest* tools"
+	default n
+	help
+	  Install cupstestdsc and cupstestppd on the target.
+
+comment "--- External Libraries ---"
+
+config CUPS_LIBPAPER
+	bool "libpaper support"
+	help
+	  Build with support for libpaper's collection of paper sizes
+
+config CUPS_LIBUSB
+	bool "libusb support"
+	help
+	  Build with libusb support. This is needed for the usb backend in order
+	  to use USB printers.
+
+config CUPS_DBUS
+	bool "DBus support"
+	help
+	  Builds CUPS with support for sending event notifications over DBUS
+
+config CUPS_SSL
+	bool "enable TLS support"
+	help
+	  Enables SSL support over IPP and HTTP, also for the web interface.
+
+config CUPS_AVAHI
+	bool "enable Avahi support"
+	help
+	  Enables support for discovery of network printers over Avahi/zeroconf.
+
+config CUPS_JAVA
+	bool "enable Java support for web interface"
+	depends on CUPS_WEBINTERFACE
+
+config CUPS_PERL
+	bool "enable Perl support for web interface"
+	depends on CUPS_WEBINTERFACE
+
+config CUPS_PHP
+	bool "enable PHP support for web interface"
+	depends on CUPS_WEBINTERFACE
+
+if CUPS_PHP && !PHP5_SAPI_CLI && !PHP5_SAPI_CGI
+	comment "Please also select PHP5_SAPI_CLI or PHP5_SAPI_CGI!"
+endif
+
+config CUPS_PYTHON
+	bool "enable Python support for web interface"
+	depends on CUPS_WEBINTERFACE
+
+endif
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/cups.make b/rules/cups.make
new file mode 100644
index 000000000..023e93ea3
--- /dev/null
+++ b/rules/cups.make
@@ -0,0 +1,238 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_CUPS) += cups
+
+#
+# Paths and names
+#
+CUPS_VERSION	:= 2.2.5
+CUPS		:= cups-$(CUPS_VERSION)
+CUPS_MD5	:= 76294dff74c3baf3fdf7c626cd48b873
+CUPS_SUFFIX	:= tar.gz
+CUPS_URL	:= https://github.com/apple/cups/releases/download/v$(CUPS_VERSION)/$(CUPS)-source.$(CUPS_SUFFIX)
+CUPS_SOURCE	:= $(SRCDIR)/$(CUPS)-source.$(CUPS_SUFFIX)
+CUPS_DIR	:= $(BUILDDIR)/cups-$(CUPS_VERSION)
+CUPS_LICENSE	:= LGPL-2.0 AND GPL-2.0
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+CUPS_CONF_ENV	:= \
+	$(CROSS_ENV) \
+	DSTROOT=$(CUPS_PKGDIR)
+
+#
+# autoconf
+#
+# The --with-* options are only used to specify strings, --without-* does
+# mostly nothing. So we're omitting them here.
+#
+# --enable-mallinfo is currently broken, see
+#  https://github.com/apple/cups/issues/5051
+#
+# libtool support is unsupported upstream. Don't enable it, it will break
+# things, until https://github.com/apple/cups/pull/5062 is merged.
+#
+# --disable-dnssd only refers to Apple's mDNSResponder, not Avahi.
+#
+# Java, PHP, Perl and Python support for the webinterface is only a runtime
+# option, there are no real bindings for it except calling the interpreters.
+#
+CUPS_CONF_TOOL	:= autoconf
+CUPS_CONF_OPT	:= \
+	$(CROSS_AUTOCONF_USR) \
+	--disable-static \
+	--disable-mallinfo \
+	--$(call ptx/endis,PTXCONF_CUPS_LIBPAPER)-libpaper \
+	--$(call ptx/endis,PTXCONF_CUPS_LIBUSB)-libusb \
+	--disable-tcp-wrappers \
+	--disable-acl \
+	--$(call ptx/endis,PTXCONF_CUPS_DBUS)-dbus \
+	--enable-shared \
+	--disable-libtool-unsupported \
+	--disable-debug \
+	--disable-debug-guards \
+	--disable-debug-printfs \
+	--disable-unit-tests \
+	--$(call ptx/endis,PTXCONF_TARGET_HARDEN_RELRO)-relro \
+	--disable-gssapi \
+	--enable-threads \
+	--$(call ptx/endis,PTXCONF_CUPS_SSL)-ssl \
+	--disable-cdsassl \
+	--$(call ptx/endis,PTXCONF_CUPS_SSL)-gnutls \
+	--disable-pam \
+	$(GLOBAL_LARGE_FILE_OPTION) \
+	--$(call ptx/endis,PTXCONF_CUPS_AVAHI)-avahi \
+	--disable-dnssd \
+	--disable-launchd \
+	--$(call ptx/endis,PTXCONF_CUPS_SYSTEMD_UNIT)-systemd \
+	--disable-upstart
+
+# Default config file settings (probably overwritten via projectroot anyways...)
+CUPS_CONF_OPT	+= \
+	--disable-page-logging \
+	--disable-browsing \
+	--disable-default-shared \
+	--disable-raw-printing \
+	--$(call ptx/endis,PTXCONF_CUPS_WEBINTERFACE)-webif \
+	--with-components=all \
+	--with-cachedir=/var/cache \
+	--with-logdir=/var/log \
+	--with-rundir=/run \
+	--with-rcdir=/etc \
+	--with-languages=none \
+	--with-cups-user=daemon \
+	--with-cups-group=lp
+
+# scripting integrations
+CUPS_PHP_PATH	:= \
+	$(if PTXCONF_PHP5_SAPI_CLI,/usr/bin/php5, \
+	$(if PTXCONF_PHP5_SAPI_CGI,/usr/bin/php-cgi))
+
+CUPS_CONF_OPT	+= \
+	$(call ptx/ifdef,PTXCONF_CUPS_JAVA,--with-java=/usr/bin/java,--without-java) \
+	$(call ptx/ifdef,PTXCONF_CUPS_PERL,--with-perl=/usr/bin/perl,--without-perl) \
+	$(call ptx/ifdef,PTXCONF_CUPS_PHP,--with-php=$(CUPS_PHP_PATH),--without-php) \
+	$(call ptx/ifdef,PTXCONF_CUPS_PYTHON,--with-python=/usr/bin/python,--without-python)
+
+# ----------------------------------------------------------------------------
+# Compile & Install
+# ----------------------------------------------------------------------------
+
+CUPS_MAKE_ENV	:= \
+	DSTROOT=$(CUPS_PKGDIR)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+# CUPS drops many files into its PKGDIR, but instead of patching the build
+# system, be explicitly picky about what to install.
+
+$(STATEDIR)/cups.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, cups)
+	@$(call install_fixup, cups,PRIORITY,optional)
+	@$(call install_fixup, cups,SECTION,base)
+	@$(call install_fixup, cups,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+	@$(call install_fixup, cups,DESCRIPTION,missing)
+
+# ----- config files, install as daemon:lp
+	@$(call install_copy, cups, daemon, lp, 750, /etc/cups)
+	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cups-files.conf)
+	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cupsd.conf)
+	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/classes.conf)
+	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/client.conf)
+	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/mailto.conf)
+	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ppd/)
+	@$(call install_alternative_tree, cups, daemon, lp,  /etc/cups/ppd/)
+	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/printers.conf)
+	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/snmp.conf)
+	@$(call install_alternative, cups, daemon, lp, 0640, /etc/printcap)
+	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.convs)
+	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.types)
+
+ifdef PTXCONF_CUPS_SSL
+	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ssl/)
+	@$(call install_alternative_tree, cups, daemon, lp, /etc/cups/ssl/)
+endif
+
+ifdef PTXCONF_CUPS_DBUS
+	@$(call install_alternative, cups, root, root, 0644, /etc/dbus-1/system.d/cups.conf)
+endif
+
+# ----- libraries
+	@$(call install_lib, cups, root, root, 0755, libcups)
+	@$(call install_lib, cups, root, root, 0755, libcupsimage)
+	@$(call install_lib, cups, root, root, 0755, libcupsmime)
+	@$(call install_lib, cups, root, root, 0755, libcupsppdc)
+
+# ----- user and system binaries, with the correct access rights
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cancel)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cups-config)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/ipptool)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lp)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpoptions)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpq)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpr)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lprm)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpstat)
+
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaccept)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaddsmb)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsctl)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsd)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsfilter)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpadmin)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpc)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpinfo)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpmove)
+
+	@$(call install_link, cups, cupsaccept, /usr/sbin/accept)
+	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsdisable)
+	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsenable)
+	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsreject)
+	@$(call install_link, cups, cupsaccept, /usr/sbin/reject)
+
+ifdef PTXCONF_CUPS_TEST_TOOLS
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestdsc)
+	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestppd)
+endif
+
+# ----- backends, filters, cgi-bin (if enabled), etc.
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/backend)
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/daemon)
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/filter)
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/monitor)
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/notifier)
+
+ifdef PTXCONF_CUPS_LIBUSB
+	@$(call install_alternative, cups, root, root, 0644, \
+		/usr/share/cups/usb/org.cups.usb-quirks)
+endif
+
+ifdef PTXCONF_CUPS_WEBINTERFACE
+	@$(call install_lib, cups, root, root, 0755, libcupscgi)
+	@$(call install_tree, cups, root, root, -, /usr/lib/cups/cgi-bin)
+	@$(call install_tree, cups, root, root, -, /usr/share/cups/templates)
+	@$(call install_tree, cups, root, root, -, /usr/share/doc/cups)
+endif
+
+# ----- startup files
+ifdef PTXCONF_CUPS_SYSTEMD_UNIT
+	@$(call install_alternative, cups, root, root, 0644, \
+		/usr/lib/tmpfiles.d/cups.conf)
+	@$(call install_alternative, cups, root, root, 0644, \
+		/usr/lib/systemd/system/cups.service)
+	@$(call install_alternative, cups, root, root, 0644, \
+		/usr/lib/systemd/system/cups.socket)
+	@$(call install_link, cups, ../cups.service, \
+		/usr/lib/systemd/system/printer.target.wants/cups.service)
+	@$(call install_link, cups, ../cups.socket, \
+		/usr/lib/systemd/system/sockets.target.wants/cups.socket)
+endif
+
+ifdef PTXCONF_CUPS_STARTSCRIPT
+	@$(call install_alternative, cups, root, root, 0755, /etc/init.d/cups)
+	@$(call install_link, cups, ../init.d/cups, \
+		/etc/rc.d/$(PTXCONF_CUPS_BBINIT_LINK))
+endif
+
+	@$(call install_finish, cups)
+
+	@$(call touch)
+
+# vim: ft=make ts=8 tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
                   ` (3 preceding siblings ...)
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-10-28  9:57   ` Michael Olbrich
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 7/7] cups-filters: new package: additional filters and backends for CUPS Roland Hieber
  2017-11-01 10:51 ` [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Michael Olbrich
  6 siblings, 1 reply; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

Most printer drivers compile model-specific PPDs from a generic schema
during the build process, using ppdc, the PPD compiler. ppdc must be
able to find CUPS' internal include files, which are architecture-
independent and can be used from sysroot-host.

Unfortunately, the CUPS build system is rather inflexible, so we have to
build the whole core distribution to get a working ppdc.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - version bump 2.2.4 -> 2.2.5 (no further config changes needed)
     - does no longer build without multithreading (see CUPS issue #5154)
     - configure: --libdir=/ is enough (but still needed), drop --exec-prefix
     - $(call install) seems to delete already installed files, instead use
       $(call compile) with additional argument "install"
     - make targetinstall stage more silent

 rules/host-cups.in   |   7 ++++
 rules/host-cups.make | 113 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 120 insertions(+)
 create mode 100644 rules/host-cups.in
 create mode 100644 rules/host-cups.make

diff --git a/rules/host-cups.in b/rules/host-cups.in
new file mode 100644
index 000000000..45edccada
--- /dev/null
+++ b/rules/host-cups.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_CUPS
+	tristate
+	default ALLYES
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/host-cups.make b/rules/host-cups.make
new file mode 100644
index 000000000..894c47e41
--- /dev/null
+++ b/rules/host-cups.make
@@ -0,0 +1,113 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_CUPS) += host-cups
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#
+# autoconf
+#
+# The --with-* options are only used to specify strings, --without-* does
+# nothing. So we're omitting them here. The only exception is
+# --with-components=core, which we are setting to only builds libcups* (which is
+# needed by ppdc).
+#
+# --libdir has to end with a /, otherwise due to broken autoconf magic, the libs
+# end up in ${prefix}/lib64, which is not what we want.
+#
+HOST_CUPS_CONF_TOOL	:= autoconf
+HOST_CUPS_CONF_OPT	:= \
+	$(HOST_AUTOCONF) \
+	--libdir=/lib/ \
+	--disable-mallinfo \
+	--disable-libpaper \
+	--disable-libusb \
+	--disable-tcp-wrappers \
+	--disable-acl \
+	--disable-dbus \
+	--disable-libtool-unsupported \
+	--disable-debug \
+	--disable-debug-guards \
+	--disable-debug-printfs \
+	--disable-unit-tests \
+	--disable-relro \
+	--disable-gssapi \
+	--enable-threads \
+	--disable-ssl \
+	--disable-cdsassl \
+	--disable-gnutls \
+	--disable-pam \
+	--disable-largefile \
+	--disable-avahi \
+	--disable-dnssd \
+	--disable-launchd \
+	--disable-systemd \
+	--disable-upstart \
+	--disable-page-logging \
+	--disable-browsing \
+	--disable-default-shared \
+	--disable-raw-printing \
+	--disable-webif \
+	--with-components=core
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/host-cups.compile:
+	@$(call targetinfo)
+	@$(call world/compile, HOST_CUPS)
+	@# ppdc isn't built by --with-components=core
+	@$(call compile, HOST_CUPS, -C ${HOST_CUPS_DIR}/ppdc)
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+HOST_CUPS_MAKE_ENV := \
+	DSTROOT=$(HOST_CUPS_PKGDIR)
+
+$(STATEDIR)/host-cups.install:
+	@$(call targetinfo)
+	@$(call world/install, HOST_CUPS)
+	@# ppdc isn't included in --with-components=core
+	@$(call compile, HOST_CUPS, -C ${HOST_CUPS_DIR}/ppdc install)
+	@$(call touch)
+
+CROSS_PPDC = $(PTXDIST_SYSROOT_CROSS)/bin/ppdc
+$(STATEDIR)/host-cups.install.post:
+	@$(call targetinfo)
+	@$(call world/install.post, HOST_CUPS)
+
+	@( \
+		echo '#!/bin/sh'; \
+		echo 'CUPS_DATADIR=$(PTXDIST_SYSROOT_HOST)/share/cups $(PTXDIST_SYSROOT_HOST)/bin/ppdc "$$@"'; \
+	) > $(CROSS_PPDC)
+	@chmod +x $(CROSS_PPDC)
+
+	@$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/host-cups.clean:
+	@$(call targetinfo)
+	@$(call clean_pkg, HOST_CUPS)
+	@rm -vf $(CROSS_PPDC)
+
+# vim: ft=make ts=8 tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [ptxdist] [PATCH v3 7/7] cups-filters: new package: additional filters and backends for CUPS
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
                   ` (4 preceding siblings ...)
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools Roland Hieber
@ 2017-10-25 20:57 ` Roland Hieber
  2017-11-01 10:51 ` [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Michael Olbrich
  6 siblings, 0 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 20:57 UTC (permalink / raw)
  To: ptxdist; +Cc: Roland Hieber

Filters for a PDF-based printing workflow, and more backends for widely
available printing protocols. No PostScript and Foomatic support (yet)
because we are missing the respective dependencies in PTXdist.

Release frequency is high, with mostly small changes per release.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---

Notes:
    changes in v2 -> v3:
     - version bump 1.17.7 -> 1.17.9
     - with CROSS_AUTOCONF_USR, setting --exec-prefix and --libdir is not
       needed
     - add new kconfig option for PCLm support (since 1.17.0)
     - improved commit message

 rules/cups-filters.in   | 73 +++++++++++++++++++++++++++++++++++++++
 rules/cups-filters.make | 90 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 163 insertions(+)
 create mode 100644 rules/cups-filters.in
 create mode 100644 rules/cups-filters.make

diff --git a/rules/cups-filters.in b/rules/cups-filters.in
new file mode 100644
index 000000000..b385d60cf
--- /dev/null
+++ b/rules/cups-filters.in
@@ -0,0 +1,73 @@
+## SECTION=applications
+
+menuconfig CUPS_FILTERS
+	tristate
+	prompt "cups-filters                  "
+
+	select LIBC_DL
+	select HOST_CUPS
+	select CUPS
+	select GLIB
+	select ZLIB
+	select LCMS
+	select FREETYPE
+	select FONTCONFIG
+	select QPDF
+
+	# Note: configure does not check for these poppler options:
+	select POPPLER			if CUPS_FILTERS_POPPLER
+	select POPPLER_BIN		if CUPS_FILTERS_POPPLER # for pdftops
+	select POPPLER_CPP		if CUPS_FILTERS_POPPLER
+	select POPPLER_CMS		if CUPS_FILTERS_POPPLER
+	select POPPLER_SPLASH		if CUPS_FILTERS_POPPLER
+	select POPPLER_XPDF		if CUPS_FILTERS_POPPLER
+
+	select LIBJPEG			if CUPS_FILTERS_JPEG
+	select LIBPNG			if CUPS_FILTERS_PNG
+
+	help
+	  cups-filters contains backends, filters, and other software that
+	  was once part of the core CUPS distribution but is no longer
+	  maintained by Apple Inc. In addition it contains additional filters
+	  and software developed independently of Apple, especially filters for
+	  the PDF-centric printing workflow introduced by OpenPrinting and a
+	  daemon to browse Bonjour broadcasts of remote CUPS printers and makes
+	  these printers available locally.
+
+if CUPS_FILTERS
+
+config CUPS_FILTERS_POPPLER
+	bool "build with poppler support"
+	help
+	  Build with poppler support, needed for pdfto* filters and banners.
+
+comment "poppler support will not build with POPPLER_SPLASH_FIXED!"
+	depends on (POPPLER_SPLASH_FIXED && CUPS_FILTERS_POPPLER)
+
+config CUPS_FILTERS_IMAGEFILTERS
+	bool "build image filters"
+	help
+	  Build imagetopdf and imagetoraster filters
+
+config CUPS_FILTERS_PCLM
+	bool "with PCLm support"
+	help
+	  Enable PCLm support for printing on Wi-Fi Direct printers via
+	  rastertopclm filter
+
+config CUPS_FILTERS_JPEG
+	bool "with JPEG support"
+	depends on CUPS_FILTERS_IMAGEFILTERS
+	default y
+	help
+	  Enable JPEG support in image filters
+
+config CUPS_FILTERS_PNG
+	bool "with PNG support"
+	depends on CUPS_FILTERS_IMAGEFILTERS
+	default y
+	help
+	  Enable PNG support in image filters
+
+endif
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/cups-filters.make b/rules/cups-filters.make
new file mode 100644
index 000000000..8de4a950d
--- /dev/null
+++ b/rules/cups-filters.make
@@ -0,0 +1,90 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_CUPS_FILTERS) += cups-filters
+
+#
+# Paths and names
+#
+CUPS_FILTERS_VERSION	:= 1.17.9
+CUPS_FILTERS_MD5	:= 2ef5f2b902bcdcb963c5ef5858976bbc
+CUPS_FILTERS		:= cups-filters-$(CUPS_FILTERS_VERSION)
+CUPS_FILTERS_SUFFIX	:= tar.xz
+CUPS_FILTERS_URL	:= http://openprinting.org/download/cups-filters/$(CUPS_FILTERS).$(CUPS_FILTERS_SUFFIX)
+CUPS_FILTERS_SOURCE	:= $(SRCDIR)/$(CUPS_FILTERS).$(CUPS_FILTERS_SUFFIX)
+CUPS_FILTERS_DIR	:= $(BUILDDIR)/$(CUPS_FILTERS)
+CUPS_FILTERS_LICENSE	:= GPL-2.0 AND GPL-2.0+ AND GPL-3.0 AND GPL-3.0+ AND LGPL-2 AND LGPL-2.1+ AND MIT AND BSD-4-clause
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#
+# autoconf
+#
+CUPS_FILTERS_CONF_TOOL	:= autoconf
+CUPS_FILTERS_CONF_OPT	:= \
+	$(CROSS_AUTOCONF_USR) \
+	--disable-silent-rules \
+	--disable-driverless \
+	--disable-auto-setup-driverless \
+	--$(call ptx/endis,PTXCONF_CUPS_FILTERS_IMAGEFILTERS)-imagefilters \
+	--disable-avahi \
+	--disable-ldap \
+	--$(call ptx/endis,PTXCONF_CUPS_FILTERS_PCLM)-pclm \
+	--$(call ptx/endis,PTXCONF_CUPS_FILTERS_POPPLER)-poppler \
+	--disable-dbus \
+	$(GLOBAL_LARGE_FILE_OPTION) \
+	--disable-mutool \
+	--disable-ghostscript \
+	--disable-ijs \
+	--disable-gs-ps2write \
+	--disable-foomatic \
+	--disable-werror \
+	--disable-braille \
+	--with-gnu-ld \
+	--with-cups-config=$(PTXDIST_SYSROOT_CROSS)/bin/cups-config \
+	--with-apple-raster-filter=rastertopdf \
+	--with-cups-rundir=/run \
+	--with-cups-domainsocket=/run/cups.sock \
+	--$(call ptx/wwo,PTXCONF_CUPS_FILTERS_JPEG)-jpeg \
+	--$(call ptx/wwo,PTXCONF_CUPS_FILTERS_PNG)-png \
+	--without-tiff \
+	--with-browseremoteprotocols="dnssd cups" \
+	--with-pdftops=pdftops
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/cups-filters.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, cups-filters)
+	@$(call install_fixup, cups-filters,PRIORITY,optional)
+	@$(call install_fixup, cups-filters,SECTION,base)
+	@$(call install_fixup, cups-filters,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+	@$(call install_fixup, cups-filters,DESCRIPTION,missing)
+
+	@$(call install_lib, cups-filters, 0, 0, 0755, libcupsfilters)
+	@$(call install_lib, cups-filters, 0, 0, 0755, libfontembed)
+	@$(call install_tree, cups-filters, 0, 0, -, /usr/lib/cups/filter)
+	@$(call install_tree, cups-filters, 0, 0, -, /usr/lib/cups/backend)
+	@$(call install_tree, cups-filters, 0, 0, -, /usr/share/cups)
+	@$(call install_tree, cups-filters, 0, 0, -, /usr/share/ppd)
+
+	@$(call install_finish, cups-filters)
+
+	@$(call touch)
+
+# vim: ft=make ts=8 tw=80
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0 Roland Hieber
@ 2017-10-25 21:15   ` Roland Hieber
  2017-10-28  9:46   ` Michael Olbrich
  1 sibling, 0 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-25 21:15 UTC (permalink / raw)
  To: ptxdist

On 25.10.2017 22:57, Roland Hieber wrote:

> -POPPLER_VERSION	:= 0.18.0
> -POPPLER_MD5	:= 4cd3bf2a0a13fa8eaf00d31368915f77
> +POPPLER_VERSION	:= 0.59.0
> +POPPLER_MD5	:= 6e44408a3b4f4a738f8a6770d0aea8a5

Oh, I forgot to check for a new version here. They released 0.60 two
weeks ago, which changes the build system from autotools to CMake... I
guess I'll get to work and send v4 then.

 - Roland

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System Roland Hieber
@ 2017-10-27 17:54   ` Michael Olbrich
  2017-10-31 22:31     ` Roland Hieber
  2017-10-28  9:54   ` Michael Olbrich
  1 sibling, 1 reply; 16+ messages in thread
From: Michael Olbrich @ 2017-10-27 17:54 UTC (permalink / raw)
  To: ptxdist

On Wed, Oct 25, 2017 at 10:57:49PM +0200, Roland Hieber wrote:
> If using systemd, CUPS can be started via socket activation or directly,
> in any case it is run as user daemon, group lp. The default spool and
> cache locations were moved to /tmp/cups so we don't need to set up a
> tmpfs for /var/spool/cups and /var/cache/cups.
> 
> sysvinit script is installed from upstream, but untested.
> 
> Some config files are only created by cupsd on the first start and not
> at install time, so we supply reasonable defaults in projectroot/ in
> order to use $(call install_alternative...) on them.
> 
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> 
> Notes:
>     changes in v2 -> v3:
>      - version bump 2.2.4 -> 2.2.5
>      - fix SPDX license identifiers
>      - $(PKGDIR)/$(CUPS) -> $(CUPS_PKGDIR)
>      - with CROSS_AUTOCONF_USR, --exec-prefix and --libdir is not needed
>      - always build multithreaded, remove kconfig option
>      - remove debugging options, can easily be enabled by creating a local
>        rules/cups-debug.make
>      - fix install_copy for /etc/cups/ssl (missing permissions)
> 
>  ...llow-explicit-disabling-of-Java-PHP-Perl-.patch |  92 ++++++++
>  ...-remove-leftover-check-for-empty-CUPS_PHP.patch |  29 +++
>  ...e-make-interpreter-detection-more-verbose.patch |  88 ++++++++
>  patches/cups-2.2.4/autogen.sh                      |   7 +
>  patches/cups-2.2.4/series                          |   6 +
>  projectroot/etc/cups/classes.conf                  |   1 +
>  projectroot/etc/cups/client.conf                   |   2 +
>  projectroot/etc/cups/cups-files.conf               |  22 ++
>  projectroot/etc/cups/mailto.conf                   |   1 +
>  projectroot/etc/cups/ppd/.createdirectory          |   0
>  projectroot/etc/cups/printers.conf                 |   1 +
>  projectroot/etc/cups/ssl/.createdirectory          |   0
>  projectroot/etc/printcap                           |   3 +
>  projectroot/usr/lib/systemd/system/cups.service    |  15 ++
>  projectroot/usr/lib/systemd/system/cups.socket     |  14 ++
>  projectroot/usr/lib/tmpfiles.d/cups.conf           |   6 +
>  rules/cups-bbinit.in                               |   8 +
>  rules/cups.in                                      | 113 ++++++++++
>  rules/cups.make                                    | 238 +++++++++++++++++++++
>  19 files changed, 646 insertions(+)
>  create mode 100644 patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
>  create mode 100644 patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
>  create mode 100644 patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
>  create mode 100755 patches/cups-2.2.4/autogen.sh
>  create mode 100644 patches/cups-2.2.4/series
>  create mode 100644 projectroot/etc/cups/classes.conf
>  create mode 100644 projectroot/etc/cups/client.conf
>  create mode 100644 projectroot/etc/cups/cups-files.conf
>  create mode 100644 projectroot/etc/cups/mailto.conf
>  create mode 100644 projectroot/etc/cups/ppd/.createdirectory
>  create mode 100644 projectroot/etc/cups/printers.conf
>  create mode 100644 projectroot/etc/cups/ssl/.createdirectory
>  create mode 100644 projectroot/etc/printcap
>  create mode 100644 projectroot/usr/lib/systemd/system/cups.service
>  create mode 100644 projectroot/usr/lib/systemd/system/cups.socket
>  create mode 100644 projectroot/usr/lib/tmpfiles.d/cups.conf
>  create mode 100644 rules/cups-bbinit.in
>  create mode 100644 rules/cups.in
>  create mode 100644 rules/cups.make
> 
> diff --git a/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> new file mode 100644
> index 000000000..f110f5aaa
> --- /dev/null
> +++ b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> @@ -0,0 +1,92 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 15:00:16 +0200
> +Subject: [PATCH] configure: allow explicit disabling of Java/PHP/Perl/Python
> + support
> +
> +Currently, when configure is called with --with-java or --with-java=,
> +auto-detection is performed. When called with --without-java, HAVE_JAVA
> +is still being defined. This is unfortunate when cross-compiling for
> +embedded systems, we would end up with Java on the host being
> +auto-detected (which is not what we have on the target), or with a wrong
> +HAVE_JAVA define. We need a way to explicitely disable scripting support
> +for all supported languages.
> +
> +Forwarded: https://github.com/apple/cups/pull/5122
> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 24 ++++++++++++++++--------
> + 1 file changed, 16 insertions(+), 8 deletions(-)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index bff3e9a0505c..137c3be72cb0 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -14,11 +14,13 @@ dnl
> + dnl Do we have Java?
> + AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interfaces ],
> + 	CUPS_JAVA="$withval",
> +-	CUPS_JAVA="")
> ++	CUPS_JAVA="auto")
> + 
> +-if test "x$CUPS_JAVA" = x; then
> ++if test "x$CUPS_JAVA" = xauto; then
> + 	AC_PATH_PROG(JAVA,java)
> + 	CUPS_JAVA="$JAVA"
> ++elif test "x$CUPS_JAVA" = xno; then
> ++	CUPS_JAVA=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
> +@@ -30,11 +32,13 @@ fi
> + dnl Do we have Perl?
> + AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interfaces ],
> + 	CUPS_PERL="$withval",
> +-	CUPS_PERL="")
> ++	CUPS_PERL="auto")
> + 
> +-if test "x$CUPS_PERL" = x; then
> ++if test "x$CUPS_PERL" = xauto; then
> + 	AC_PATH_PROG(PERL,perl)
> + 	CUPS_PERL="$PERL"
> ++elif test "x$CUPS_PERL" = xno; then
> ++	CUPS_PERL=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
> +@@ -46,9 +50,9 @@ fi
> + dnl Do we have PHP?
> + AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfaces ],
> + 	CUPS_PHP="$withval",
> +-	CUPS_PHP="")
> ++	CUPS_PHP="auto")
> + 
> +-if test "x$CUPS_PHP" = x; then
> ++if test "x$CUPS_PHP" = xauto; then
> + 	AC_PATH_PROG(PHPCGI,php-cgi)
> + 	if test "x$PHPCGI" = x; then
> + 		AC_PATH_PROG(PHP,php)
> +@@ -56,6 +60,8 @@ if test "x$CUPS_PHP" = x; then
> + 	else
> + 		CUPS_PHP="$PHPCGI"
> + 	fi
> ++elif test "x$CUPS_PHP" = xno; then
> ++	CUPS_PHP=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> +@@ -69,11 +75,13 @@ fi
> + dnl Do we have Python?
> + AC_ARG_WITH(python, [  --with-python           set Python interpreter for web interfaces ],
> + 	CUPS_PYTHON="$withval",
> +-	CUPS_PYTHON="")
> ++	CUPS_PYTHON="auto")
> + 
> +-if test "x$CUPS_PYTHON" = x; then
> ++if test "x$CUPS_PYTHON" = xauto; then
> + 	AC_PATH_PROG(PYTHON,python)
> + 	CUPS_PYTHON="$PYTHON"
> ++elif test "x$CUPS_PYTHON" = xno; then
> ++	CUPS_PYTHON=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
> diff --git a/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> new file mode 100644
> index 000000000..b0b59a78f
> --- /dev/null
> +++ b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> @@ -0,0 +1,29 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 17:04:49 +0200
> +Subject: [PATCH] configure: remove leftover check for empty CUPS_PHP
> +
> +After the respective AC_DEFINE_UNQUOTED(CUPS_PHP) call, assigning
> +anything to CUPS_PHP is a no-op. Remove it so the surrounding test looks
> +like the other tests in the file.
> +
> +Forwarded: https://github.com/apple/cups/pull/5122
> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 4 +---
> + 1 file changed, 1 insertion(+), 3 deletions(-)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index 137c3be72cb0..f73d5310a3ae 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -66,9 +66,7 @@ fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> + 
> +-if test "x$CUPS_PHP" = x; then
> +-	CUPS_PHP="no"
> +-else
> ++if test "x$CUPS_PHP" != x; then
> + 	AC_DEFINE(HAVE_PHP)
> + fi
> + 
> diff --git a/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
> new file mode 100644
> index 000000000..a1bfc3ade
> --- /dev/null
> +++ b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
> @@ -0,0 +1,88 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 16:17:03 +0200
> +Subject: [PATCH] configure: make interpreter detection more verbose
> +
> +Forwarded: https://github.com/apple/cups/pull/5122
> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 16 ++++++++++++++++
> + 1 file changed, 16 insertions(+)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index f73d5310a3ae..4b1b6a80c5ac 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -16,6 +16,7 @@ AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interf
> + 	CUPS_JAVA="$withval",
> + 	CUPS_JAVA="auto")
> + 
> ++AC_MSG_CHECKING([for Java interpreter])
> + if test "x$CUPS_JAVA" = xauto; then
> + 	AC_PATH_PROG(JAVA,java)
> + 	CUPS_JAVA="$JAVA"
> +@@ -26,7 +27,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
> + 
> + if test "x$CUPS_JAVA" != x; then
> ++	AC_MSG_RESULT([$CUPS_JAVA])
> + 	AC_DEFINE(HAVE_JAVA)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have Perl?
> +@@ -34,6 +38,7 @@ AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interf
> + 	CUPS_PERL="$withval",
> + 	CUPS_PERL="auto")
> + 
> ++AC_MSG_CHECKING([for Perl interpreter])
> + if test "x$CUPS_PERL" = xauto; then
> + 	AC_PATH_PROG(PERL,perl)
> + 	CUPS_PERL="$PERL"
> +@@ -44,7 +49,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
> + 
> + if test "x$CUPS_PERL" != x; then
> ++	AC_MSG_RESULT([$CUPS_PERL])
> + 	AC_DEFINE(HAVE_PERL)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have PHP?
> +@@ -52,6 +60,7 @@ AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfac
> + 	CUPS_PHP="$withval",
> + 	CUPS_PHP="auto")
> + 
> ++AC_MSG_CHECKING([for PHP interpreter])
> + if test "x$CUPS_PHP" = xauto; then
> + 	AC_PATH_PROG(PHPCGI,php-cgi)
> + 	if test "x$PHPCGI" = x; then
> +@@ -67,7 +76,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> + 
> + if test "x$CUPS_PHP" != x; then
> ++	AC_MSG_RESULT([$CUPS_PHP])
> + 	AC_DEFINE(HAVE_PHP)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have Python?
> +@@ -75,6 +87,7 @@ AC_ARG_WITH(python, [  --with-python           set Python interpreter for web in
> + 	CUPS_PYTHON="$withval",
> + 	CUPS_PYTHON="auto")
> + 
> ++AC_MSG_CHECKING([for Python interpreter])
> + if test "x$CUPS_PYTHON" = xauto; then
> + 	AC_PATH_PROG(PYTHON,python)
> + 	CUPS_PYTHON="$PYTHON"
> +@@ -85,5 +98,8 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
> + 
> + if test "x$CUPS_PYTHON" != x; then
> ++	AC_MSG_RESULT([$CUPS_PYTHON])
> + 	AC_DEFINE(HAVE_PYTHON)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> diff --git a/patches/cups-2.2.4/autogen.sh b/patches/cups-2.2.4/autogen.sh
> new file mode 100755
> index 000000000..1c70286be
> --- /dev/null
> +++ b/patches/cups-2.2.4/autogen.sh
> @@ -0,0 +1,7 @@
> +#!/bin/bash
> +autoconf \
> +        --force \
> +        --warnings=cross \
> +        --warnings=syntax \
> +        --warnings=obsolete \
> +        --warnings=unsupported
> diff --git a/patches/cups-2.2.4/series b/patches/cups-2.2.4/series
> new file mode 100644
> index 000000000..8ed7533f1
> --- /dev/null
> +++ b/patches/cups-2.2.4/series
> @@ -0,0 +1,6 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> +0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> +0003-configure-make-interpreter-detection-more-verbose.patch
> +# c7ecb5f5cc92f09bc09802d57507070b  - git-ptx-patches magic
> diff --git a/projectroot/etc/cups/classes.conf b/projectroot/etc/cups/classes.conf
> new file mode 100644
> index 000000000..dea737751
> --- /dev/null
> +++ b/projectroot/etc/cups/classes.conf
> @@ -0,0 +1 @@
> +# classes.conf - class configuration file for cups
> diff --git a/projectroot/etc/cups/client.conf b/projectroot/etc/cups/client.conf
> new file mode 100644
> index 000000000..f8f0b6832
> --- /dev/null
> +++ b/projectroot/etc/cups/client.conf
> @@ -0,0 +1,2 @@
> +# CUPS client configuration
> +ServerName localhost
> diff --git a/projectroot/etc/cups/cups-files.conf b/projectroot/etc/cups/cups-files.conf
> new file mode 100644
> index 000000000..2cc2d5a5b
> --- /dev/null
> +++ b/projectroot/etc/cups/cups-files.conf
> @@ -0,0 +1,22 @@
> +# File/directory/user/group configuration file for the CUPS scheduler.
> +User daemon
> +Group lp
> +SystemGroup root
> +
> +AccessLog /var/log/cups/access_log
> +ErrorLog /var/log/cups/error_log
> +PageLog /var/log/cups/page_log
> +
> +CacheDir /tmp/cups/cache
> +DataDir /usr/share/cups
> +DocumentRoot /usr/share/doc/cups
> +RequestRoot /tmp/cups/spool
> +ServerBin /usr/lib/cups
> +ServerRoot /etc/cups
> +StateDir /var/run/cups
> +
> +Printcap /etc/printcap
> +PrintcapFormat bsd
> +
> +# SSL/TLS keychain for the scheduler...
> +#ServerKeychain ssl
> diff --git a/projectroot/etc/cups/mailto.conf b/projectroot/etc/cups/mailto.conf
> new file mode 100644
> index 000000000..4502adaee
> --- /dev/null
> +++ b/projectroot/etc/cups/mailto.conf
> @@ -0,0 +1 @@
> +# mailto.conf - configuration file for cups email notifier
> diff --git a/projectroot/etc/cups/ppd/.createdirectory b/projectroot/etc/cups/ppd/.createdirectory
> new file mode 100644
> index 000000000..e69de29bb
> diff --git a/projectroot/etc/cups/printers.conf b/projectroot/etc/cups/printers.conf
> new file mode 100644
> index 000000000..bf9879904
> --- /dev/null
> +++ b/projectroot/etc/cups/printers.conf
> @@ -0,0 +1 @@
> +# printers.conf - printer configuration file for cups
> diff --git a/projectroot/etc/cups/ssl/.createdirectory b/projectroot/etc/cups/ssl/.createdirectory
> new file mode 100644
> index 000000000..e69de29bb
> diff --git a/projectroot/etc/printcap b/projectroot/etc/printcap
> new file mode 100644
> index 000000000..e74f358e1
> --- /dev/null
> +++ b/projectroot/etc/printcap
> @@ -0,0 +1,3 @@
> +# This file was automatically generated by cupsd(8) from the
> +# /etc/cups/printers.conf file.  All changes to this file
> +# will be lost.
> diff --git a/projectroot/usr/lib/systemd/system/cups.service b/projectroot/usr/lib/systemd/system/cups.service
> new file mode 100644
> index 000000000..ff94f69d2
> --- /dev/null
> +++ b/projectroot/usr/lib/systemd/system/cups.service
> @@ -0,0 +1,15 @@
> +[Unit]
> +Description=CUPS Scheduler service
> +Documentation=man:cupsd(8)
> +Requires=systemd-tmpfiles-setup.service
> +Requires=cups.socket
> +
> +[Service]
> +User=daemon
> +Group=lp
> +ExecStart=/usr/sbin/cupsd -l -c /etc/cups/cupsd.conf -s /etc/cups/cups-files.conf
> +Type=simple
> +
> +[Install]
> +Also=cups.socket
> +WantedBy=printer.target
> diff --git a/projectroot/usr/lib/systemd/system/cups.socket b/projectroot/usr/lib/systemd/system/cups.socket
> new file mode 100644
> index 000000000..de9f43b6b
> --- /dev/null
> +++ b/projectroot/usr/lib/systemd/system/cups.socket
> @@ -0,0 +1,14 @@
> +[Unit]
> +Description=CUPS Scheduler socket
> +PartOf=cups.service
> +
> +[Socket]
> +ListenStream=/run/cups.sock
> +ListenStream=[::1]:631
> +ListenStream=127.0.0.1:631
> +BindIPv6Only=No
> +SocketUser=daemon
> +SocketGroup=lp
> +
> +[Install]
> +WantedBy=sockets.target
> diff --git a/projectroot/usr/lib/tmpfiles.d/cups.conf b/projectroot/usr/lib/tmpfiles.d/cups.conf
> new file mode 100644
> index 000000000..c000cf255
> --- /dev/null
> +++ b/projectroot/usr/lib/tmpfiles.d/cups.conf
> @@ -0,0 +1,6 @@
> +#Type	Path			Mode	UID	GID	Age	Argument
> +d	/var/log/cups		750	daemon	lp	-
> +d	/tmp/cups/cache/	750	daemon	lp	-
> +d	/tmp/cups/spool/	750	daemon	lp	-
> +d	/tmp/cups/spool/tmp/	750	daemon	lp	-
> +d	/var/run/cups		750	daemon	lp	-
> diff --git a/rules/cups-bbinit.in b/rules/cups-bbinit.in
> new file mode 100644
> index 000000000..86b6f649a
> --- /dev/null
> +++ b/rules/cups-bbinit.in
> @@ -0,0 +1,8 @@
> +## SECTION=initmethod_bbinit
> +
> +config CUPS_BBINIT_LINK
> +        string "cups"
> +        depends on CUPS_STARTSCRIPT
> +        default "S90cups"
> +
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/cups.in b/rules/cups.in
> new file mode 100644
> index 000000000..13b7142d6
> --- /dev/null
> +++ b/rules/cups.in
> @@ -0,0 +1,113 @@
> +## SECTION=applications
> +
> +menuconfig CUPS
> +	tristate
> +	prompt "cups                          "
> +
> +	select ROOTFS_VAR_LOG
> +	select ROOTFS_VAR_RUN
> +	select LIBC_M
> +	select LIBC_CRYPT
> +	select ZLIB
> +
> +	select LIBC_PTHREAD		if CUPS_THREADING
> +	select SYSTEMD			if CUPS_SYSTEMD_UNIT
> +	select LIBPAPER			if CUPS_LIBPAPER
> +	select LIBUSB			if CUPS_LIBUSB
> +	select DBUS			if CUPS_DBUS
> +	select GNUTLS			if CUPS_SSL
> +	select AVAHI			if CUPS_AVAHI
> +	select AVAHI_LIBAVAHI_CLIENT	if CUPS_AVAHI
> +	select ORACLE_JAVA7_JRE		if CUPS_JAVA

This is not good. ORACLE_JAVA7_JRE is the x86-only binary packages.
Just add a comment to the help text, that some java is needed.

> +	select PERL			if CUPS_PERL
> +	select PHP5			if CUPS_PHP
> +	select PYTHON			if CUPS_PYTHON

Is python2 the only option or could python3 be used as well?
Also, for all of these: There is no build-time dependency, right? So this
should be 'if CUPS_??? && RUNTIME'.

> +
> +	help
> +	  CUPS is the standards-based, open source printing system. It uses the
> +	  Internet Printing Protocol (IPP) to support printing to local and
> +	  network printers.
> +
> +if CUPS
> +
> +comment "--- CUPS Features ---"
> +
> +config CUPS_WEBINTERFACE
> +	bool "enable web interface"
> +	help
> +	   Enable CUPS printer management via HTTP(S). Only required for hosts
> +	   which should act as a printing server.
> +
> +	   If you overwrite the config files for CUPS, be sure to have
> +	   "WebInterface Yes" in your projectroot/etc/cups/cupsd.conf.
> +
> +config CUPS_SYSTEMD_UNIT
> +	bool "install systemd unit file"
> +	default y
> +	depends on INITMETHOD_SYSTEMD
> +	help
> +	  Installs a systemd service file so that CUPS can be started as a
> +	  systemd service.
> +
> +config CUPS_STARTSCRIPT
> +	bool "install init.d script"
> +	depends on INITMETHOD_BBINIT
> +	help
> +	  Install /etc/init.d/cups
> +
> +config CUPS_TEST_TOOLS
> +	bool "install cupstest* tools"
> +	default n
> +	help
> +	  Install cupstestdsc and cupstestppd on the target.
> +
> +comment "--- External Libraries ---"
> +
> +config CUPS_LIBPAPER
> +	bool "libpaper support"
> +	help
> +	  Build with support for libpaper's collection of paper sizes
> +
> +config CUPS_LIBUSB
> +	bool "libusb support"
> +	help
> +	  Build with libusb support. This is needed for the usb backend in order
> +	  to use USB printers.
> +
> +config CUPS_DBUS
> +	bool "DBus support"
> +	help
> +	  Builds CUPS with support for sending event notifications over DBUS
> +
> +config CUPS_SSL
> +	bool "enable TLS support"
> +	help
> +	  Enables SSL support over IPP and HTTP, also for the web interface.
> +
> +config CUPS_AVAHI
> +	bool "enable Avahi support"
> +	help
> +	  Enables support for discovery of network printers over Avahi/zeroconf.
> +

if CUPS_WEBINTERFACE

is simpler.

Michael

> +config CUPS_JAVA
> +	bool "enable Java support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +config CUPS_PERL
> +	bool "enable Perl support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +config CUPS_PHP
> +	bool "enable PHP support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +if CUPS_PHP && !PHP5_SAPI_CLI && !PHP5_SAPI_CGI
> +	comment "Please also select PHP5_SAPI_CLI or PHP5_SAPI_CGI!"
> +endif
> +
> +config CUPS_PYTHON
> +	bool "enable Python support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +endif
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/cups.make b/rules/cups.make
> new file mode 100644
> index 000000000..023e93ea3
> --- /dev/null
> +++ b/rules/cups.make
> @@ -0,0 +1,238 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_CUPS) += cups
> +
> +#
> +# Paths and names
> +#
> +CUPS_VERSION	:= 2.2.5
> +CUPS		:= cups-$(CUPS_VERSION)
> +CUPS_MD5	:= 76294dff74c3baf3fdf7c626cd48b873
> +CUPS_SUFFIX	:= tar.gz
> +CUPS_URL	:= https://github.com/apple/cups/releases/download/v$(CUPS_VERSION)/$(CUPS)-source.$(CUPS_SUFFIX)
> +CUPS_SOURCE	:= $(SRCDIR)/$(CUPS)-source.$(CUPS_SUFFIX)
> +CUPS_DIR	:= $(BUILDDIR)/cups-$(CUPS_VERSION)
> +CUPS_LICENSE	:= LGPL-2.0 AND GPL-2.0
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +CUPS_CONF_ENV	:= \
> +	$(CROSS_ENV) \
> +	DSTROOT=$(CUPS_PKGDIR)
> +
> +#
> +# autoconf
> +#
> +# The --with-* options are only used to specify strings, --without-* does
> +# mostly nothing. So we're omitting them here.
> +#
> +# --enable-mallinfo is currently broken, see
> +#  https://github.com/apple/cups/issues/5051
> +#
> +# libtool support is unsupported upstream. Don't enable it, it will break
> +# things, until https://github.com/apple/cups/pull/5062 is merged.
> +#
> +# --disable-dnssd only refers to Apple's mDNSResponder, not Avahi.
> +#
> +# Java, PHP, Perl and Python support for the webinterface is only a runtime
> +# option, there are no real bindings for it except calling the interpreters.
> +#
> +CUPS_CONF_TOOL	:= autoconf
> +CUPS_CONF_OPT	:= \
> +	$(CROSS_AUTOCONF_USR) \
> +	--disable-static \
> +	--disable-mallinfo \
> +	--$(call ptx/endis,PTXCONF_CUPS_LIBPAPER)-libpaper \
> +	--$(call ptx/endis,PTXCONF_CUPS_LIBUSB)-libusb \
> +	--disable-tcp-wrappers \
> +	--disable-acl \
> +	--$(call ptx/endis,PTXCONF_CUPS_DBUS)-dbus \
> +	--enable-shared \
> +	--disable-libtool-unsupported \
> +	--disable-debug \
> +	--disable-debug-guards \
> +	--disable-debug-printfs \
> +	--disable-unit-tests \
> +	--$(call ptx/endis,PTXCONF_TARGET_HARDEN_RELRO)-relro \
> +	--disable-gssapi \
> +	--enable-threads \
> +	--$(call ptx/endis,PTXCONF_CUPS_SSL)-ssl \
> +	--disable-cdsassl \
> +	--$(call ptx/endis,PTXCONF_CUPS_SSL)-gnutls \
> +	--disable-pam \
> +	$(GLOBAL_LARGE_FILE_OPTION) \
> +	--$(call ptx/endis,PTXCONF_CUPS_AVAHI)-avahi \
> +	--disable-dnssd \
> +	--disable-launchd \
> +	--$(call ptx/endis,PTXCONF_CUPS_SYSTEMD_UNIT)-systemd \
> +	--disable-upstart
> +
> +# Default config file settings (probably overwritten via projectroot anyways...)
> +CUPS_CONF_OPT	+= \
> +	--disable-page-logging \
> +	--disable-browsing \
> +	--disable-default-shared \
> +	--disable-raw-printing \
> +	--$(call ptx/endis,PTXCONF_CUPS_WEBINTERFACE)-webif \
> +	--with-components=all \
> +	--with-cachedir=/var/cache \
> +	--with-logdir=/var/log \
> +	--with-rundir=/run \
> +	--with-rcdir=/etc \
> +	--with-languages=none \
> +	--with-cups-user=daemon \
> +	--with-cups-group=lp
> +
> +# scripting integrations
> +CUPS_PHP_PATH	:= \
> +	$(if PTXCONF_PHP5_SAPI_CLI,/usr/bin/php5, \
> +	$(if PTXCONF_PHP5_SAPI_CGI,/usr/bin/php-cgi))
> +
> +CUPS_CONF_OPT	+= \
> +	$(call ptx/ifdef,PTXCONF_CUPS_JAVA,--with-java=/usr/bin/java,--without-java) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PERL,--with-perl=/usr/bin/perl,--without-perl) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PHP,--with-php=$(CUPS_PHP_PATH),--without-php) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PYTHON,--with-python=/usr/bin/python,--without-python)
> +
> +# ----------------------------------------------------------------------------
> +# Compile & Install
> +# ----------------------------------------------------------------------------
> +
> +CUPS_MAKE_ENV	:= \
> +	DSTROOT=$(CUPS_PKGDIR)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +# CUPS drops many files into its PKGDIR, but instead of patching the build
> +# system, be explicitly picky about what to install.
> +
> +$(STATEDIR)/cups.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, cups)
> +	@$(call install_fixup, cups,PRIORITY,optional)
> +	@$(call install_fixup, cups,SECTION,base)
> +	@$(call install_fixup, cups,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
> +	@$(call install_fixup, cups,DESCRIPTION,missing)
> +
> +# ----- config files, install as daemon:lp
> +	@$(call install_copy, cups, daemon, lp, 750, /etc/cups)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cups-files.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cupsd.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/classes.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/client.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/mailto.conf)
> +	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ppd/)
> +	@$(call install_alternative_tree, cups, daemon, lp,  /etc/cups/ppd/)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/printers.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/snmp.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/printcap)
> +	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.convs)
> +	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.types)
> +
> +ifdef PTXCONF_CUPS_SSL
> +	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ssl/)
> +	@$(call install_alternative_tree, cups, daemon, lp, /etc/cups/ssl/)
> +endif
> +
> +ifdef PTXCONF_CUPS_DBUS
> +	@$(call install_alternative, cups, root, root, 0644, /etc/dbus-1/system.d/cups.conf)
> +endif
> +
> +# ----- libraries
> +	@$(call install_lib, cups, root, root, 0755, libcups)
> +	@$(call install_lib, cups, root, root, 0755, libcupsimage)
> +	@$(call install_lib, cups, root, root, 0755, libcupsmime)
> +	@$(call install_lib, cups, root, root, 0755, libcupsppdc)
> +
> +# ----- user and system binaries, with the correct access rights
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cancel)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cups-config)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/ipptool)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lp)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpoptions)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpq)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpr)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lprm)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpstat)
> +
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaccept)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaddsmb)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsctl)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsd)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsfilter)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpadmin)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpc)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpinfo)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpmove)
> +
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/accept)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsdisable)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsenable)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsreject)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/reject)
> +
> +ifdef PTXCONF_CUPS_TEST_TOOLS
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestdsc)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestppd)
> +endif
> +
> +# ----- backends, filters, cgi-bin (if enabled), etc.
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/backend)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/daemon)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/filter)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/monitor)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/notifier)
> +
> +ifdef PTXCONF_CUPS_LIBUSB
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/share/cups/usb/org.cups.usb-quirks)
> +endif
> +
> +ifdef PTXCONF_CUPS_WEBINTERFACE
> +	@$(call install_lib, cups, root, root, 0755, libcupscgi)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/cgi-bin)
> +	@$(call install_tree, cups, root, root, -, /usr/share/cups/templates)
> +	@$(call install_tree, cups, root, root, -, /usr/share/doc/cups)
> +endif
> +
> +# ----- startup files
> +ifdef PTXCONF_CUPS_SYSTEMD_UNIT
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/tmpfiles.d/cups.conf)
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/systemd/system/cups.service)
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/systemd/system/cups.socket)
> +	@$(call install_link, cups, ../cups.service, \
> +		/usr/lib/systemd/system/printer.target.wants/cups.service)
> +	@$(call install_link, cups, ../cups.socket, \
> +		/usr/lib/systemd/system/sockets.target.wants/cups.socket)
> +endif
> +
> +ifdef PTXCONF_CUPS_STARTSCRIPT
> +	@$(call install_alternative, cups, root, root, 0755, /etc/init.d/cups)
> +	@$(call install_link, cups, ../init.d/cups, \
> +		/etc/rc.d/$(PTXCONF_CUPS_BBINIT_LINK))
> +endif
> +
> +	@$(call install_finish, cups)
> +
> +	@$(call touch)
> +
> +# vim: ft=make ts=8 tw=80
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0 Roland Hieber
  2017-10-25 21:15   ` Roland Hieber
@ 2017-10-28  9:46   ` Michael Olbrich
  1 sibling, 0 replies; 16+ messages in thread
From: Michael Olbrich @ 2017-10-28  9:46 UTC (permalink / raw)
  To: ptxdist

On Wed, Oct 25, 2017 at 10:57:48PM +0200, Roland Hieber wrote:
> This is quite a version bump, spanning six years of poppler development.
> Upstream now provides data for rendering cyrillic languages in the
> package poppler-data, but this dependency is only detected at compile
> time, so we make sure the build order is right.
> 
> Some applications require the old xpdf headers, the CPP wrapper or CMYK
> support, so make these configure options selectable. Same for the Splash
> backend, which can now also be built with single precision or
> fixed-point arithmetic. PNG and JPEG support is no longer broken,
> poppler now also includes an internal DCT decoder. The GTK dependency
> has been dropped (or was it even necessary in the first place?)
> 
> Don't wonder about --disable-relocatable, it only applies to Windows.
> 
> poppler allows using zlib to uncompress flate streams, but with the
> warning that this is "not totally safe", so I disabled it.
> 
> Additionally, poppler could benefit from packaging libopenjpeg and
> libtiff in ptxdist for parsing JPEG2000 or TIFF embedded in PDFs.
> Likewise, libnss could be packaged for PDF signature support.  Also
> there is the option to build a Qt5 wrapper, but this is currently only
> build-tested and needs to be tested in runtime.
> 
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> 
> Notes:
>     changes in v2 -> v3:
>      - POPPLER_GLIB also needs HOST_GLIB for sysroot-host/bin/glib-mkenums
>      - add optional dependency for gobject-introspection
>      - add POPPLER_OPENJPEG, POPPLER_TIFF, POPPLER_NSS with depends on
>        BROKEN for future use
>      - respect PTXCONF_TARGET_DEBUG_* instead of introducing an extra
>        POPPLER_BUILD_DEBUG
>      - enable qt5 wrapper (only build-tested)
>      - order kconfig options by usage and add section headers for more
>        structure
> 
>  rules/poppler.in   | 138 ++++++++++++++++++++++++++++++++++++++++++++---------
>  rules/poppler.make |  56 ++++++++++++++++------
>  2 files changed, 156 insertions(+), 38 deletions(-)
> 
> diff --git a/rules/poppler.in b/rules/poppler.in
> index b107dc7a5..3a74ead41 100644
> --- a/rules/poppler.in
> +++ b/rules/poppler.in
> @@ -4,23 +4,33 @@ menuconfig POPPLER
>  	tristate
>  	prompt "poppler                       "
>  	select FONTCONFIG
> +	select FREETYPE
>  	select HOST_GETTEXT
> -	select GLIB		if POPPLER_GLIB
> -	select LIBPNG		if POPPLER_PNG
> -	select LIBJPEG		if POPPLER_JPEG
> -	select CAIRO		if POPPLER_CAIRO
> -	select GTK		if POPPLER_SPLASH && POPPLER_GLIB
> -	select ZLIB		if POPPLER_ZLIB
> -	select LIBCURL		if POPPLER_CURL
> -	select LCMS		if POPPLER_CMS
> -	select QT4		if POPPLER_QT4
> -	select QT4_BUILD_GUI	if POPPLER_QT4
> -	select QT4_BUILD_XML	if POPPLER_QT4
> +	select POPPLER_DATA			if POPPLER_WITH_DATA
> +	select GLIB				if POPPLER_GLIB
> +	select HOST_GLIB			if POPPLER_GLIB
> +	select GOBJECT_INTROSPECTION_HELPER	if POPPLER_GOI
> +	select GOBJECT_INTROSPECTION		if POPPLER_GOI
> +	select LIBPNG				if POPPLER_PNG
> +	select LIBJPEG				if POPPLER_JPEG
> +	select CAIRO				if POPPLER_CAIRO
> +	select CAIRO_FREETYPE			if POPPLER_CAIRO
> +	select ZLIB				if POPPLER_ZLIB
> +	select LIBCURL				if POPPLER_CURL
> +	select LCMS				if POPPLER_CMS
> +	select QT4				if POPPLER_QT4
> +	select QT4_BUILD_GUI			if POPPLER_QT4
> +	select QT4_BUILD_XML			if POPPLER_QT4
> +	select QT4_BUILD_QTESTLIB		if POPPLER_QT4
> +	select QT5				if POPPLER_QT5
> +	select QT5_MODULE_QTBASE		if POPPLER_QT5
>  	help
>  	  Poppler is a PDF rendering library based on the xpdf-3.0 code base.
>  
>  if POPPLER
>  
> +comment "--- Install components ---"
> +
>  config POPPLER_BIN
>  	bool
>  	prompt "install poppler utilities"
> @@ -29,6 +39,26 @@ config POPPLER_BIN
>  	  pdffonts, pdfimages, pdfinfo, pdftoabw, pdftohtml, pdftoppm, pdftops,
>  	  pdftotext.
>  
> +config POPPLER_XPDF
> +	bool
> +	prompt "install unsupported xpdf headers"
> +	help
> +	  Install XPDF headers for software that still depends on them.
> +	  Normally, this option should not be needed.
> +
> +config POPPLER_WITH_DATA
> +	bool
> +	prompt "install poppler-data"
> +	help
> +	  poppler-data contains the encoding files which enable poppler to
> +	  correctly render CJK and Cyrillic.
> +
> +comment "--- Wrappers ---"
> +
> +config POPPLER_CPP
> +	bool
> +	prompt "enable poppler cpp wrapper"
> +
>  config POPPLER_GLIB
>  	select POPPLER_CAIRO
>  	bool
> @@ -36,20 +66,37 @@ config POPPLER_GLIB
>  	help
>  	  build poppler glib wrapper.
>  
> +config POPPLER_GOI
> +	select POPPLER_GLIB
> +	bool
> +	prompt "enable GObject introspection"
> +	help
> +	  build GObject introspection data for poppler. You may also want to
> +	  select GOBJECT_INTROSPECTION if you want to use that on the target,
> +	  but it's not a hard dependency for generating the data for poppler.

Please handle this like we do elsewhere: No prompt and name the option
POPPLER_INTROSPECTION.

> +
>  config POPPLER_QT4
>  	bool
>  	prompt "enable poppler Qt4 wrapper"
>  	help
>  	  build poppler Qt4 wrapper.
>  
> -comment "least one graphics backend should be selected"
> -	depends on !(POPPLER_CAIRO || POPPLER_SPLASH)
> +config POPPLER_QT5
> +	bool
> +	prompt "enable poppler Qt5 wrapper"
> +	help
> +	  build poppler Qt5 wrapper.
> +
> +comment "--- Backends ---"
> +
> +comment "at least one graphics backend should be selected"
> +	depends on !(POPPLER_CAIRO || POPPLER_SPLASH || POPPLER_QT4)
>  
>  config POPPLER_CAIRO
>  	bool
>  	prompt "enable poppler cairo graphics backend"
>  	help
> -	  built cairo graphics backend
> +	  build cairo graphics backend
>  
>  config POPPLER_SPLASH
>  	bool
> @@ -57,37 +104,82 @@ config POPPLER_SPLASH
>  	help
>  	  build splash graphics backend
>  
> +config POPPLER_SPLASH_SINGLE
> +	bool
> +	prompt "use single precision float arithmetic"
> +	default n if HAS_HARDFLOAT

This makes no sense. 'n' is the default if nothing is given and
HAS_HARDFLOAT is never defined for the ptxconfig.

> +	depends on POPPLER_SPLASH
> +	help
> +	  Use single precision instead of double precision floating point
> +	  arithmetic in Splash backend
> +
> +config POPPLER_SPLASH_FIXED
> +	bool
> +	prompt "use fixed point arithmetic"
> +	default n if HAS_HARDFLOAT

same here.

> +	depends on POPPLER_SPLASH
> +	depends on !POPPLER_SPLASH_SINGLE
> +	help
> +	  If enabled, the Splash backend will use floating point operations
> +	  instead of fixed-point arithmetic.
> +
> +comment "--- Features --- "
> +
> +config POPPLER_CMYK
> +	bool
> +	prompt "enable poppler CMYK raster support"
> +
>  config POPPLER_PNG
>  	bool
> -	# fails to build with the current libpng
> -	depends on BROKEN
>  	prompt "enable poppler png support"
>  	help
> -	  compiles poppler with png support.
> +	  compile poppler with png support via libpng
>  
>  config POPPLER_JPEG
>  	bool
> -	depends on BROKEN
>  	prompt "enable poppler jpeg support"
>  	help
> -	  compiles poppler with jpeg support.
> +	  compile poppler with jpeg support via libjpeg
> +
> +config POPPLER_OPENJPEG
> +	bool
> +	depends on BROKEN
> +	prompt "enable poppler jpeg2000 support"
> +	help
> +	  compile poppler with jpeg2000 (JPX) support via libopenjpeg
> +
> +config POPPLER_TIFF
> +	bool
> +	depends on BROKEN
> +	prompt "enable poppler tiff support"
> +	help
> +	  compile poppler with support for TIFF via libtiff
> +
> +config POPPLER_NSS
> +	bool
> +	depends on BROKEN
> +	prompt "enable poppler nss support"
> +	help
> +	  compile poppler with support for signed PDFs via libnss
>  
>  config POPPLER_ZLIB
>  	bool
>  	prompt "enable poppler zlib support"
>  	help
> -	  compiles poppler with zlib support.
> +	  compile poppler with zlib support.
>  
>  config POPPLER_CURL
>  	bool
>  	prompt "enable poppler curl support"
>  	help
> -	  compiles poppler with curl support.
> +	  compile poppler with libcurl support.
>  
>  config POPPLER_CMS
>  	bool
> -	prompt "enable poppler cms support"
> +	prompt "enable poppler color management support"
>  	help
> -	  compiles poppler with color management system support.
> +	  compile poppler with color management support via libcms1
>  
>  endif
> +
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/poppler.make b/rules/poppler.make
> index 7ac676bf1..ba55162e5 100644
> --- a/rules/poppler.make
> +++ b/rules/poppler.make
> @@ -2,13 +2,19 @@
>  #
>  # Copyright (C) 2007 by Luotao Fu <l.fu@pengutronix.de>
>  #               2009 by Robert Schwebel
> +#               2017 by Roland Hieber <r.hieber@pengutronix.de>
>  #
>  # See CREDITS for details about who has contributed to this project.
>  #
>  # For further information about the PTXdist project and license conditions
>  # see the README file.
>  #
> -
> +# TODOs for improvement:
> +# - package libnss for signature support in PDFs
> +# - package libtiff for additional TIFF support
> +# - runtime-test the Qt5 backend
> +# - package libopenjpeg and build with --enable-libopenjpeg
> +# - update lcms to lcms2 and use --enable-cms=lcms2
>  #
>  # We provide this package
>  #
> @@ -17,10 +23,10 @@ PACKAGES-$(PTXCONF_POPPLER) += poppler
>  #
>  # Paths and names
>  #
> -POPPLER_VERSION	:= 0.18.0
> -POPPLER_MD5	:= 4cd3bf2a0a13fa8eaf00d31368915f77
> +POPPLER_VERSION	:= 0.59.0
> +POPPLER_MD5	:= 6e44408a3b4f4a738f8a6770d0aea8a5
>  POPPLER		:= poppler-$(POPPLER_VERSION)
> -POPPLER_SUFFIX	:= tar.gz
> +POPPLER_SUFFIX	:= tar.xz
>  POPPLER_URL	:= http://poppler.freedesktop.org/$(POPPLER).$(POPPLER_SUFFIX)
>  POPPLER_SOURCE	:= $(SRCDIR)/$(POPPLER).$(POPPLER_SUFFIX)
>  POPPLER_DIR	:= $(BUILDDIR)/$(POPPLER)
> @@ -35,34 +41,51 @@ POPPLER_ENV 	:= $(CROSS_ENV)
>  #
>  # autoconf
>  #
> -POPPLER_AUTOCONF := \
> +POPPLER_CONF_TOOL := autoconf
> +POPPLER_CONF_OPT := \
>  	$(CROSS_AUTOCONF_USR) \
> +	--enable-option-checking \
> +	--disable-silent-rules \
> +	--disable-dependency-tracking \

Don't add these 3 options.

> +	--enable-shared \

> +	--enable-fast-install \
> +	--enable-libtool-lock \

same here.

> +	--$(call ptx/endis, PTXCONF_POPPLER_XPDF)-xpdf-headers \
> +	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_OFF,--enable-build-type=release,) \
> +	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_KEEP,--enable-build-type=release,) \
> +	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_ENABLE,--enable-build-type=debug,) \
> +	$(call ptx/ifdef,PTXCONF_TARGET_DEBUG_FULL,--enable-build-type=debugfull,) \

The PTXCONF_TARGET_DEBUG_* options should be used in a way that ensures,
that the stripped binaries are identical regardless of the selected option.
I don't think this is the case here.

> +	--$(call ptx/endis, PTXCONF_POPPLER_SINGLE)-single-precision \
> +	--$(call ptx/endis, PTXCONF_POPPLER_FIXED)-fixedpoint \
> +	--$(call ptx/endis, PTXCONF_POPPLER_CMYK)-cmyk \
> +	--disable-relocatable \
> +	--enable-libopenjpeg=$(call ptx/ifdef,PTXCONF_POPPLER_OPENJPEG,openjpeg2,none) \
> +	--$(call ptx/endis, PTXCONF_POPPLER_NSS)-libnss \
> +	--$(call ptx/endis, PTXCONF_POPPLER_TIFF)-libtiff \
>  	$(GLOBAL_LARGE_FILE_OPTION) \
> -	--disable-xpdf-headers \
> -	--$(call ptx/disen, PTXCONF_HAS_HARDFLOAT)-single-precision \
> -	--disable-fixedpoint \
> -	--disable-libopenjpeg \
> -	--disable-libtiff \
>  	--$(call ptx/endis, PTXCONF_POPPLER_ZLIB)-zlib \
> +	--disable-zlib-uncompress \
>  	--$(call ptx/endis, PTXCONF_POPPLER_CURL)-libcurl \
> -	--$(call ptx/endis, PTXCONF_POPPLER_JPEG)-libjpeg \
> +	--enable-dctdecoder=$(call ptx/ifdef,PTXCONF_POPPLER_JPEG,libjpeg,none) \
>  	--$(call ptx/endis, PTXCONF_POPPLER_PNG)-libpng \
>  	--$(call ptx/endis, PTXCONF_POPPLER_SPLASH)-splash-output \
>  	--$(call ptx/endis, PTXCONF_POPPLER_CAIRO)-cairo-output \
>  	--$(call ptx/endis, PTXCONF_POPPLER_GLIB)-poppler-glib \
> -	--disable-introspection \
> +	--$(call ptx/endis, PTXCONF_POPPLER_GOI)-introspection \
>  	--disable-gtk-doc \
>  	--disable-gtk-doc-html \
>  	--disable-gtk-doc-pdf \
>  	--$(call ptx/endis, PTXCONF_POPPLER_QT4)-poppler-qt4 \
> -	--disable-poppler-cpp \
> +	--disable-poppler-qt5 \
> +	--$(call ptx/endis, PTXCONF_POPPLER_CPP)-poppler-cpp \
>  	--disable-gtk-test \
>  	--$(call ptx/endis, PTXCONF_POPPLER_BIN)-utils \
>  	--disable-compile-warnings \
> -	--$(call ptx/endis, PTXCONF_POPPLER_CMS)-cms \
> +	--enable-cms=$(call ptx/ifdef,PTXCONF_POPPLER_CMS,lcms1,no) \
>  	--without-x \
>  	--with-font-configuration=fontconfig \
> -	--without-libiconv-prefix
> +	--without-libiconv-prefix \
> +	--with-testdatadir=
>  
>  # ----------------------------------------------------------------------------
>  # Target-Install
> @@ -85,6 +108,9 @@ ifdef PTXCONF_POPPLER_BIN
>  		$(call install_copy, poppler, 0, 0, 0755, -, /usr/bin/$$i); \
>  	done
>  endif
> +ifdef PTXCONF_POPPLER_CPP
> +	@$(call install_lib, poppler, 0, 0, 0644, libpoppler-cpp)
> +endif
>  ifdef PTXCONF_POPPLER_GLIB
>  	@$(call install_lib, poppler, 0, 0, 0644, libpoppler-glib)
>  endif

The introspection files should be installed, right?

Michael

> -- 
> 2.11.0
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System Roland Hieber
  2017-10-27 17:54   ` Michael Olbrich
@ 2017-10-28  9:54   ` Michael Olbrich
  2017-10-31 21:17     ` Roland Hieber
  1 sibling, 1 reply; 16+ messages in thread
From: Michael Olbrich @ 2017-10-28  9:54 UTC (permalink / raw)
  To: ptxdist

On Wed, Oct 25, 2017 at 10:57:49PM +0200, Roland Hieber wrote:
> If using systemd, CUPS can be started via socket activation or directly,
> in any case it is run as user daemon, group lp. The default spool and
> cache locations were moved to /tmp/cups so we don't need to set up a
> tmpfs for /var/spool/cups and /var/cache/cups.
> 
> sysvinit script is installed from upstream, but untested.
> 
> Some config files are only created by cupsd on the first start and not
> at install time, so we supply reasonable defaults in projectroot/ in
> order to use $(call install_alternative...) on them.
> 
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> 
> Notes:
>     changes in v2 -> v3:
>      - version bump 2.2.4 -> 2.2.5
>      - fix SPDX license identifiers
>      - $(PKGDIR)/$(CUPS) -> $(CUPS_PKGDIR)
>      - with CROSS_AUTOCONF_USR, --exec-prefix and --libdir is not needed
>      - always build multithreaded, remove kconfig option
>      - remove debugging options, can easily be enabled by creating a local
>        rules/cups-debug.make
>      - fix install_copy for /etc/cups/ssl (missing permissions)
> 
>  ...llow-explicit-disabling-of-Java-PHP-Perl-.patch |  92 ++++++++
>  ...-remove-leftover-check-for-empty-CUPS_PHP.patch |  29 +++
>  ...e-make-interpreter-detection-more-verbose.patch |  88 ++++++++
>  patches/cups-2.2.4/autogen.sh                      |   7 +
>  patches/cups-2.2.4/series                          |   6 +
>  projectroot/etc/cups/classes.conf                  |   1 +
>  projectroot/etc/cups/client.conf                   |   2 +
>  projectroot/etc/cups/cups-files.conf               |  22 ++
>  projectroot/etc/cups/mailto.conf                   |   1 +
>  projectroot/etc/cups/ppd/.createdirectory          |   0
>  projectroot/etc/cups/printers.conf                 |   1 +
>  projectroot/etc/cups/ssl/.createdirectory          |   0
>  projectroot/etc/printcap                           |   3 +
>  projectroot/usr/lib/systemd/system/cups.service    |  15 ++
>  projectroot/usr/lib/systemd/system/cups.socket     |  14 ++
>  projectroot/usr/lib/tmpfiles.d/cups.conf           |   6 +
>  rules/cups-bbinit.in                               |   8 +
>  rules/cups.in                                      | 113 ++++++++++
>  rules/cups.make                                    | 238 +++++++++++++++++++++
>  19 files changed, 646 insertions(+)
>  create mode 100644 patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
>  create mode 100644 patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
>  create mode 100644 patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
>  create mode 100755 patches/cups-2.2.4/autogen.sh
>  create mode 100644 patches/cups-2.2.4/series
>  create mode 100644 projectroot/etc/cups/classes.conf
>  create mode 100644 projectroot/etc/cups/client.conf
>  create mode 100644 projectroot/etc/cups/cups-files.conf
>  create mode 100644 projectroot/etc/cups/mailto.conf
>  create mode 100644 projectroot/etc/cups/ppd/.createdirectory
>  create mode 100644 projectroot/etc/cups/printers.conf
>  create mode 100644 projectroot/etc/cups/ssl/.createdirectory
>  create mode 100644 projectroot/etc/printcap
>  create mode 100644 projectroot/usr/lib/systemd/system/cups.service
>  create mode 100644 projectroot/usr/lib/systemd/system/cups.socket
>  create mode 100644 projectroot/usr/lib/tmpfiles.d/cups.conf
>  create mode 100644 rules/cups-bbinit.in
>  create mode 100644 rules/cups.in
>  create mode 100644 rules/cups.make
> 
> diff --git a/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> new file mode 100644
> index 000000000..f110f5aaa
> --- /dev/null
> +++ b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> @@ -0,0 +1,92 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 15:00:16 +0200
> +Subject: [PATCH] configure: allow explicit disabling of Java/PHP/Perl/Python
> + support
> +
> +Currently, when configure is called with --with-java or --with-java=,
> +auto-detection is performed. When called with --without-java, HAVE_JAVA
> +is still being defined. This is unfortunate when cross-compiling for
> +embedded systems, we would end up with Java on the host being
> +auto-detected (which is not what we have on the target), or with a wrong
> +HAVE_JAVA define. We need a way to explicitely disable scripting support
> +for all supported languages.
> +
> +Forwarded: https://github.com/apple/cups/pull/5122

It seems something was done upstream. Can you cherry-pick those commits
instead. That will simplify updating later on.

Michael

> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 24 ++++++++++++++++--------
> + 1 file changed, 16 insertions(+), 8 deletions(-)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index bff3e9a0505c..137c3be72cb0 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -14,11 +14,13 @@ dnl
> + dnl Do we have Java?
> + AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interfaces ],
> + 	CUPS_JAVA="$withval",
> +-	CUPS_JAVA="")
> ++	CUPS_JAVA="auto")
> + 
> +-if test "x$CUPS_JAVA" = x; then
> ++if test "x$CUPS_JAVA" = xauto; then
> + 	AC_PATH_PROG(JAVA,java)
> + 	CUPS_JAVA="$JAVA"
> ++elif test "x$CUPS_JAVA" = xno; then
> ++	CUPS_JAVA=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
> +@@ -30,11 +32,13 @@ fi
> + dnl Do we have Perl?
> + AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interfaces ],
> + 	CUPS_PERL="$withval",
> +-	CUPS_PERL="")
> ++	CUPS_PERL="auto")
> + 
> +-if test "x$CUPS_PERL" = x; then
> ++if test "x$CUPS_PERL" = xauto; then
> + 	AC_PATH_PROG(PERL,perl)
> + 	CUPS_PERL="$PERL"
> ++elif test "x$CUPS_PERL" = xno; then
> ++	CUPS_PERL=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
> +@@ -46,9 +50,9 @@ fi
> + dnl Do we have PHP?
> + AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfaces ],
> + 	CUPS_PHP="$withval",
> +-	CUPS_PHP="")
> ++	CUPS_PHP="auto")
> + 
> +-if test "x$CUPS_PHP" = x; then
> ++if test "x$CUPS_PHP" = xauto; then
> + 	AC_PATH_PROG(PHPCGI,php-cgi)
> + 	if test "x$PHPCGI" = x; then
> + 		AC_PATH_PROG(PHP,php)
> +@@ -56,6 +60,8 @@ if test "x$CUPS_PHP" = x; then
> + 	else
> + 		CUPS_PHP="$PHPCGI"
> + 	fi
> ++elif test "x$CUPS_PHP" = xno; then
> ++	CUPS_PHP=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> +@@ -69,11 +75,13 @@ fi
> + dnl Do we have Python?
> + AC_ARG_WITH(python, [  --with-python           set Python interpreter for web interfaces ],
> + 	CUPS_PYTHON="$withval",
> +-	CUPS_PYTHON="")
> ++	CUPS_PYTHON="auto")
> + 
> +-if test "x$CUPS_PYTHON" = x; then
> ++if test "x$CUPS_PYTHON" = xauto; then
> + 	AC_PATH_PROG(PYTHON,python)
> + 	CUPS_PYTHON="$PYTHON"
> ++elif test "x$CUPS_PYTHON" = xno; then
> ++	CUPS_PYTHON=""
> + fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
> diff --git a/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> new file mode 100644
> index 000000000..b0b59a78f
> --- /dev/null
> +++ b/patches/cups-2.2.4/0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> @@ -0,0 +1,29 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 17:04:49 +0200
> +Subject: [PATCH] configure: remove leftover check for empty CUPS_PHP
> +
> +After the respective AC_DEFINE_UNQUOTED(CUPS_PHP) call, assigning
> +anything to CUPS_PHP is a no-op. Remove it so the surrounding test looks
> +like the other tests in the file.
> +
> +Forwarded: https://github.com/apple/cups/pull/5122
> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 4 +---
> + 1 file changed, 1 insertion(+), 3 deletions(-)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index 137c3be72cb0..f73d5310a3ae 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -66,9 +66,7 @@ fi
> + 
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> + 
> +-if test "x$CUPS_PHP" = x; then
> +-	CUPS_PHP="no"
> +-else
> ++if test "x$CUPS_PHP" != x; then
> + 	AC_DEFINE(HAVE_PHP)
> + fi
> + 
> diff --git a/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
> new file mode 100644
> index 000000000..a1bfc3ade
> --- /dev/null
> +++ b/patches/cups-2.2.4/0003-configure-make-interpreter-detection-more-verbose.patch
> @@ -0,0 +1,88 @@
> +From: Roland Hieber <r.hieber@pengutronix.de>
> +Date: Mon, 25 Sep 2017 16:17:03 +0200
> +Subject: [PATCH] configure: make interpreter detection more verbose
> +
> +Forwarded: https://github.com/apple/cups/pull/5122
> +Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> +---
> + config-scripts/cups-scripting.m4 | 16 ++++++++++++++++
> + 1 file changed, 16 insertions(+)
> +
> +diff --git a/config-scripts/cups-scripting.m4 b/config-scripts/cups-scripting.m4
> +index f73d5310a3ae..4b1b6a80c5ac 100644
> +--- a/config-scripts/cups-scripting.m4
> ++++ b/config-scripts/cups-scripting.m4
> +@@ -16,6 +16,7 @@ AC_ARG_WITH(java, [  --with-java             set Java interpreter for web interf
> + 	CUPS_JAVA="$withval",
> + 	CUPS_JAVA="auto")
> + 
> ++AC_MSG_CHECKING([for Java interpreter])
> + if test "x$CUPS_JAVA" = xauto; then
> + 	AC_PATH_PROG(JAVA,java)
> + 	CUPS_JAVA="$JAVA"
> +@@ -26,7 +27,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_JAVA, "$CUPS_JAVA")
> + 
> + if test "x$CUPS_JAVA" != x; then
> ++	AC_MSG_RESULT([$CUPS_JAVA])
> + 	AC_DEFINE(HAVE_JAVA)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have Perl?
> +@@ -34,6 +38,7 @@ AC_ARG_WITH(perl, [  --with-perl             set Perl interpreter for web interf
> + 	CUPS_PERL="$withval",
> + 	CUPS_PERL="auto")
> + 
> ++AC_MSG_CHECKING([for Perl interpreter])
> + if test "x$CUPS_PERL" = xauto; then
> + 	AC_PATH_PROG(PERL,perl)
> + 	CUPS_PERL="$PERL"
> +@@ -44,7 +49,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PERL, "$CUPS_PERL")
> + 
> + if test "x$CUPS_PERL" != x; then
> ++	AC_MSG_RESULT([$CUPS_PERL])
> + 	AC_DEFINE(HAVE_PERL)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have PHP?
> +@@ -52,6 +60,7 @@ AC_ARG_WITH(php, [  --with-php              set PHP interpreter for web interfac
> + 	CUPS_PHP="$withval",
> + 	CUPS_PHP="auto")
> + 
> ++AC_MSG_CHECKING([for PHP interpreter])
> + if test "x$CUPS_PHP" = xauto; then
> + 	AC_PATH_PROG(PHPCGI,php-cgi)
> + 	if test "x$PHPCGI" = x; then
> +@@ -67,7 +76,10 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PHP, "$CUPS_PHP")
> + 
> + if test "x$CUPS_PHP" != x; then
> ++	AC_MSG_RESULT([$CUPS_PHP])
> + 	AC_DEFINE(HAVE_PHP)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> + 
> + dnl Do we have Python?
> +@@ -75,6 +87,7 @@ AC_ARG_WITH(python, [  --with-python           set Python interpreter for web in
> + 	CUPS_PYTHON="$withval",
> + 	CUPS_PYTHON="auto")
> + 
> ++AC_MSG_CHECKING([for Python interpreter])
> + if test "x$CUPS_PYTHON" = xauto; then
> + 	AC_PATH_PROG(PYTHON,python)
> + 	CUPS_PYTHON="$PYTHON"
> +@@ -85,5 +98,8 @@ fi
> + AC_DEFINE_UNQUOTED(CUPS_PYTHON, "$CUPS_PYTHON")
> + 
> + if test "x$CUPS_PYTHON" != x; then
> ++	AC_MSG_RESULT([$CUPS_PYTHON])
> + 	AC_DEFINE(HAVE_PYTHON)
> ++else
> ++	AC_MSG_RESULT([none])
> + fi
> diff --git a/patches/cups-2.2.4/autogen.sh b/patches/cups-2.2.4/autogen.sh
> new file mode 100755
> index 000000000..1c70286be
> --- /dev/null
> +++ b/patches/cups-2.2.4/autogen.sh
> @@ -0,0 +1,7 @@
> +#!/bin/bash
> +autoconf \
> +        --force \
> +        --warnings=cross \
> +        --warnings=syntax \
> +        --warnings=obsolete \
> +        --warnings=unsupported
> diff --git a/patches/cups-2.2.4/series b/patches/cups-2.2.4/series
> new file mode 100644
> index 000000000..8ed7533f1
> --- /dev/null
> +++ b/patches/cups-2.2.4/series
> @@ -0,0 +1,6 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
> +0002-configure-remove-leftover-check-for-empty-CUPS_PHP.patch
> +0003-configure-make-interpreter-detection-more-verbose.patch
> +# c7ecb5f5cc92f09bc09802d57507070b  - git-ptx-patches magic
> diff --git a/projectroot/etc/cups/classes.conf b/projectroot/etc/cups/classes.conf
> new file mode 100644
> index 000000000..dea737751
> --- /dev/null
> +++ b/projectroot/etc/cups/classes.conf
> @@ -0,0 +1 @@
> +# classes.conf - class configuration file for cups
> diff --git a/projectroot/etc/cups/client.conf b/projectroot/etc/cups/client.conf
> new file mode 100644
> index 000000000..f8f0b6832
> --- /dev/null
> +++ b/projectroot/etc/cups/client.conf
> @@ -0,0 +1,2 @@
> +# CUPS client configuration
> +ServerName localhost
> diff --git a/projectroot/etc/cups/cups-files.conf b/projectroot/etc/cups/cups-files.conf
> new file mode 100644
> index 000000000..2cc2d5a5b
> --- /dev/null
> +++ b/projectroot/etc/cups/cups-files.conf
> @@ -0,0 +1,22 @@
> +# File/directory/user/group configuration file for the CUPS scheduler.
> +User daemon
> +Group lp
> +SystemGroup root
> +
> +AccessLog /var/log/cups/access_log
> +ErrorLog /var/log/cups/error_log
> +PageLog /var/log/cups/page_log
> +
> +CacheDir /tmp/cups/cache
> +DataDir /usr/share/cups
> +DocumentRoot /usr/share/doc/cups
> +RequestRoot /tmp/cups/spool
> +ServerBin /usr/lib/cups
> +ServerRoot /etc/cups
> +StateDir /var/run/cups
> +
> +Printcap /etc/printcap
> +PrintcapFormat bsd
> +
> +# SSL/TLS keychain for the scheduler...
> +#ServerKeychain ssl
> diff --git a/projectroot/etc/cups/mailto.conf b/projectroot/etc/cups/mailto.conf
> new file mode 100644
> index 000000000..4502adaee
> --- /dev/null
> +++ b/projectroot/etc/cups/mailto.conf
> @@ -0,0 +1 @@
> +# mailto.conf - configuration file for cups email notifier
> diff --git a/projectroot/etc/cups/ppd/.createdirectory b/projectroot/etc/cups/ppd/.createdirectory
> new file mode 100644
> index 000000000..e69de29bb
> diff --git a/projectroot/etc/cups/printers.conf b/projectroot/etc/cups/printers.conf
> new file mode 100644
> index 000000000..bf9879904
> --- /dev/null
> +++ b/projectroot/etc/cups/printers.conf
> @@ -0,0 +1 @@
> +# printers.conf - printer configuration file for cups
> diff --git a/projectroot/etc/cups/ssl/.createdirectory b/projectroot/etc/cups/ssl/.createdirectory
> new file mode 100644
> index 000000000..e69de29bb
> diff --git a/projectroot/etc/printcap b/projectroot/etc/printcap
> new file mode 100644
> index 000000000..e74f358e1
> --- /dev/null
> +++ b/projectroot/etc/printcap
> @@ -0,0 +1,3 @@
> +# This file was automatically generated by cupsd(8) from the
> +# /etc/cups/printers.conf file.  All changes to this file
> +# will be lost.
> diff --git a/projectroot/usr/lib/systemd/system/cups.service b/projectroot/usr/lib/systemd/system/cups.service
> new file mode 100644
> index 000000000..ff94f69d2
> --- /dev/null
> +++ b/projectroot/usr/lib/systemd/system/cups.service
> @@ -0,0 +1,15 @@
> +[Unit]
> +Description=CUPS Scheduler service
> +Documentation=man:cupsd(8)
> +Requires=systemd-tmpfiles-setup.service
> +Requires=cups.socket
> +
> +[Service]
> +User=daemon
> +Group=lp
> +ExecStart=/usr/sbin/cupsd -l -c /etc/cups/cupsd.conf -s /etc/cups/cups-files.conf
> +Type=simple
> +
> +[Install]
> +Also=cups.socket
> +WantedBy=printer.target
> diff --git a/projectroot/usr/lib/systemd/system/cups.socket b/projectroot/usr/lib/systemd/system/cups.socket
> new file mode 100644
> index 000000000..de9f43b6b
> --- /dev/null
> +++ b/projectroot/usr/lib/systemd/system/cups.socket
> @@ -0,0 +1,14 @@
> +[Unit]
> +Description=CUPS Scheduler socket
> +PartOf=cups.service
> +
> +[Socket]
> +ListenStream=/run/cups.sock
> +ListenStream=[::1]:631
> +ListenStream=127.0.0.1:631
> +BindIPv6Only=No
> +SocketUser=daemon
> +SocketGroup=lp
> +
> +[Install]
> +WantedBy=sockets.target
> diff --git a/projectroot/usr/lib/tmpfiles.d/cups.conf b/projectroot/usr/lib/tmpfiles.d/cups.conf
> new file mode 100644
> index 000000000..c000cf255
> --- /dev/null
> +++ b/projectroot/usr/lib/tmpfiles.d/cups.conf
> @@ -0,0 +1,6 @@
> +#Type	Path			Mode	UID	GID	Age	Argument
> +d	/var/log/cups		750	daemon	lp	-
> +d	/tmp/cups/cache/	750	daemon	lp	-
> +d	/tmp/cups/spool/	750	daemon	lp	-
> +d	/tmp/cups/spool/tmp/	750	daemon	lp	-
> +d	/var/run/cups		750	daemon	lp	-
> diff --git a/rules/cups-bbinit.in b/rules/cups-bbinit.in
> new file mode 100644
> index 000000000..86b6f649a
> --- /dev/null
> +++ b/rules/cups-bbinit.in
> @@ -0,0 +1,8 @@
> +## SECTION=initmethod_bbinit
> +
> +config CUPS_BBINIT_LINK
> +        string "cups"
> +        depends on CUPS_STARTSCRIPT
> +        default "S90cups"
> +
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/cups.in b/rules/cups.in
> new file mode 100644
> index 000000000..13b7142d6
> --- /dev/null
> +++ b/rules/cups.in
> @@ -0,0 +1,113 @@
> +## SECTION=applications
> +
> +menuconfig CUPS
> +	tristate
> +	prompt "cups                          "
> +
> +	select ROOTFS_VAR_LOG
> +	select ROOTFS_VAR_RUN
> +	select LIBC_M
> +	select LIBC_CRYPT
> +	select ZLIB
> +
> +	select LIBC_PTHREAD		if CUPS_THREADING
> +	select SYSTEMD			if CUPS_SYSTEMD_UNIT
> +	select LIBPAPER			if CUPS_LIBPAPER
> +	select LIBUSB			if CUPS_LIBUSB
> +	select DBUS			if CUPS_DBUS
> +	select GNUTLS			if CUPS_SSL
> +	select AVAHI			if CUPS_AVAHI
> +	select AVAHI_LIBAVAHI_CLIENT	if CUPS_AVAHI
> +	select ORACLE_JAVA7_JRE		if CUPS_JAVA
> +	select PERL			if CUPS_PERL
> +	select PHP5			if CUPS_PHP
> +	select PYTHON			if CUPS_PYTHON
> +
> +	help
> +	  CUPS is the standards-based, open source printing system. It uses the
> +	  Internet Printing Protocol (IPP) to support printing to local and
> +	  network printers.
> +
> +if CUPS
> +
> +comment "--- CUPS Features ---"
> +
> +config CUPS_WEBINTERFACE
> +	bool "enable web interface"
> +	help
> +	   Enable CUPS printer management via HTTP(S). Only required for hosts
> +	   which should act as a printing server.
> +
> +	   If you overwrite the config files for CUPS, be sure to have
> +	   "WebInterface Yes" in your projectroot/etc/cups/cupsd.conf.
> +
> +config CUPS_SYSTEMD_UNIT
> +	bool "install systemd unit file"
> +	default y
> +	depends on INITMETHOD_SYSTEMD
> +	help
> +	  Installs a systemd service file so that CUPS can be started as a
> +	  systemd service.
> +
> +config CUPS_STARTSCRIPT
> +	bool "install init.d script"
> +	depends on INITMETHOD_BBINIT
> +	help
> +	  Install /etc/init.d/cups
> +
> +config CUPS_TEST_TOOLS
> +	bool "install cupstest* tools"
> +	default n
> +	help
> +	  Install cupstestdsc and cupstestppd on the target.
> +
> +comment "--- External Libraries ---"
> +
> +config CUPS_LIBPAPER
> +	bool "libpaper support"
> +	help
> +	  Build with support for libpaper's collection of paper sizes
> +
> +config CUPS_LIBUSB
> +	bool "libusb support"
> +	help
> +	  Build with libusb support. This is needed for the usb backend in order
> +	  to use USB printers.
> +
> +config CUPS_DBUS
> +	bool "DBus support"
> +	help
> +	  Builds CUPS with support for sending event notifications over DBUS
> +
> +config CUPS_SSL
> +	bool "enable TLS support"
> +	help
> +	  Enables SSL support over IPP and HTTP, also for the web interface.
> +
> +config CUPS_AVAHI
> +	bool "enable Avahi support"
> +	help
> +	  Enables support for discovery of network printers over Avahi/zeroconf.
> +
> +config CUPS_JAVA
> +	bool "enable Java support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +config CUPS_PERL
> +	bool "enable Perl support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +config CUPS_PHP
> +	bool "enable PHP support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +if CUPS_PHP && !PHP5_SAPI_CLI && !PHP5_SAPI_CGI
> +	comment "Please also select PHP5_SAPI_CLI or PHP5_SAPI_CGI!"
> +endif
> +
> +config CUPS_PYTHON
> +	bool "enable Python support for web interface"
> +	depends on CUPS_WEBINTERFACE
> +
> +endif
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/cups.make b/rules/cups.make
> new file mode 100644
> index 000000000..023e93ea3
> --- /dev/null
> +++ b/rules/cups.make
> @@ -0,0 +1,238 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_CUPS) += cups
> +
> +#
> +# Paths and names
> +#
> +CUPS_VERSION	:= 2.2.5
> +CUPS		:= cups-$(CUPS_VERSION)
> +CUPS_MD5	:= 76294dff74c3baf3fdf7c626cd48b873
> +CUPS_SUFFIX	:= tar.gz
> +CUPS_URL	:= https://github.com/apple/cups/releases/download/v$(CUPS_VERSION)/$(CUPS)-source.$(CUPS_SUFFIX)
> +CUPS_SOURCE	:= $(SRCDIR)/$(CUPS)-source.$(CUPS_SUFFIX)
> +CUPS_DIR	:= $(BUILDDIR)/cups-$(CUPS_VERSION)
> +CUPS_LICENSE	:= LGPL-2.0 AND GPL-2.0
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +CUPS_CONF_ENV	:= \
> +	$(CROSS_ENV) \
> +	DSTROOT=$(CUPS_PKGDIR)
> +
> +#
> +# autoconf
> +#
> +# The --with-* options are only used to specify strings, --without-* does
> +# mostly nothing. So we're omitting them here.
> +#
> +# --enable-mallinfo is currently broken, see
> +#  https://github.com/apple/cups/issues/5051
> +#
> +# libtool support is unsupported upstream. Don't enable it, it will break
> +# things, until https://github.com/apple/cups/pull/5062 is merged.
> +#
> +# --disable-dnssd only refers to Apple's mDNSResponder, not Avahi.
> +#
> +# Java, PHP, Perl and Python support for the webinterface is only a runtime
> +# option, there are no real bindings for it except calling the interpreters.
> +#
> +CUPS_CONF_TOOL	:= autoconf
> +CUPS_CONF_OPT	:= \
> +	$(CROSS_AUTOCONF_USR) \
> +	--disable-static \
> +	--disable-mallinfo \
> +	--$(call ptx/endis,PTXCONF_CUPS_LIBPAPER)-libpaper \
> +	--$(call ptx/endis,PTXCONF_CUPS_LIBUSB)-libusb \
> +	--disable-tcp-wrappers \
> +	--disable-acl \
> +	--$(call ptx/endis,PTXCONF_CUPS_DBUS)-dbus \
> +	--enable-shared \
> +	--disable-libtool-unsupported \
> +	--disable-debug \
> +	--disable-debug-guards \
> +	--disable-debug-printfs \
> +	--disable-unit-tests \
> +	--$(call ptx/endis,PTXCONF_TARGET_HARDEN_RELRO)-relro \
> +	--disable-gssapi \
> +	--enable-threads \
> +	--$(call ptx/endis,PTXCONF_CUPS_SSL)-ssl \
> +	--disable-cdsassl \
> +	--$(call ptx/endis,PTXCONF_CUPS_SSL)-gnutls \
> +	--disable-pam \
> +	$(GLOBAL_LARGE_FILE_OPTION) \
> +	--$(call ptx/endis,PTXCONF_CUPS_AVAHI)-avahi \
> +	--disable-dnssd \
> +	--disable-launchd \
> +	--$(call ptx/endis,PTXCONF_CUPS_SYSTEMD_UNIT)-systemd \
> +	--disable-upstart
> +
> +# Default config file settings (probably overwritten via projectroot anyways...)
> +CUPS_CONF_OPT	+= \
> +	--disable-page-logging \
> +	--disable-browsing \
> +	--disable-default-shared \
> +	--disable-raw-printing \
> +	--$(call ptx/endis,PTXCONF_CUPS_WEBINTERFACE)-webif \
> +	--with-components=all \
> +	--with-cachedir=/var/cache \
> +	--with-logdir=/var/log \
> +	--with-rundir=/run \
> +	--with-rcdir=/etc \
> +	--with-languages=none \
> +	--with-cups-user=daemon \
> +	--with-cups-group=lp
> +
> +# scripting integrations
> +CUPS_PHP_PATH	:= \
> +	$(if PTXCONF_PHP5_SAPI_CLI,/usr/bin/php5, \
> +	$(if PTXCONF_PHP5_SAPI_CGI,/usr/bin/php-cgi))
> +
> +CUPS_CONF_OPT	+= \
> +	$(call ptx/ifdef,PTXCONF_CUPS_JAVA,--with-java=/usr/bin/java,--without-java) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PERL,--with-perl=/usr/bin/perl,--without-perl) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PHP,--with-php=$(CUPS_PHP_PATH),--without-php) \
> +	$(call ptx/ifdef,PTXCONF_CUPS_PYTHON,--with-python=/usr/bin/python,--without-python)
> +
> +# ----------------------------------------------------------------------------
> +# Compile & Install
> +# ----------------------------------------------------------------------------
> +
> +CUPS_MAKE_ENV	:= \
> +	DSTROOT=$(CUPS_PKGDIR)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +# CUPS drops many files into its PKGDIR, but instead of patching the build
> +# system, be explicitly picky about what to install.
> +
> +$(STATEDIR)/cups.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, cups)
> +	@$(call install_fixup, cups,PRIORITY,optional)
> +	@$(call install_fixup, cups,SECTION,base)
> +	@$(call install_fixup, cups,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
> +	@$(call install_fixup, cups,DESCRIPTION,missing)
> +
> +# ----- config files, install as daemon:lp
> +	@$(call install_copy, cups, daemon, lp, 750, /etc/cups)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cups-files.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/cupsd.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/classes.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/client.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/mailto.conf)
> +	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ppd/)
> +	@$(call install_alternative_tree, cups, daemon, lp,  /etc/cups/ppd/)
> +	@$(call install_alternative, cups, daemon, lp, 0600, /etc/cups/printers.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/cups/snmp.conf)
> +	@$(call install_alternative, cups, daemon, lp, 0640, /etc/printcap)
> +	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.convs)
> +	@$(call install_alternative, cups, root, root, 0644, /usr/share/cups/mime/mime.types)
> +
> +ifdef PTXCONF_CUPS_SSL
> +	@$(call install_copy, cups, daemon, lp, 0750, /etc/cups/ssl/)
> +	@$(call install_alternative_tree, cups, daemon, lp, /etc/cups/ssl/)
> +endif
> +
> +ifdef PTXCONF_CUPS_DBUS
> +	@$(call install_alternative, cups, root, root, 0644, /etc/dbus-1/system.d/cups.conf)
> +endif
> +
> +# ----- libraries
> +	@$(call install_lib, cups, root, root, 0755, libcups)
> +	@$(call install_lib, cups, root, root, 0755, libcupsimage)
> +	@$(call install_lib, cups, root, root, 0755, libcupsmime)
> +	@$(call install_lib, cups, root, root, 0755, libcupsppdc)
> +
> +# ----- user and system binaries, with the correct access rights
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cancel)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cups-config)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/ipptool)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lp)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpoptions)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpq)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpr)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lprm)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/lpstat)
> +
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaccept)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsaddsmb)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsctl)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsd)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/cupsfilter)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpadmin)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpc)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpinfo)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/sbin/lpmove)
> +
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/accept)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsdisable)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsenable)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/cupsreject)
> +	@$(call install_link, cups, cupsaccept, /usr/sbin/reject)
> +
> +ifdef PTXCONF_CUPS_TEST_TOOLS
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestdsc)
> +	@$(call install_copy, cups, root, root, 0755, -, /usr/bin/cupstestppd)
> +endif
> +
> +# ----- backends, filters, cgi-bin (if enabled), etc.
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/backend)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/daemon)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/filter)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/monitor)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/notifier)
> +
> +ifdef PTXCONF_CUPS_LIBUSB
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/share/cups/usb/org.cups.usb-quirks)
> +endif
> +
> +ifdef PTXCONF_CUPS_WEBINTERFACE
> +	@$(call install_lib, cups, root, root, 0755, libcupscgi)
> +	@$(call install_tree, cups, root, root, -, /usr/lib/cups/cgi-bin)
> +	@$(call install_tree, cups, root, root, -, /usr/share/cups/templates)
> +	@$(call install_tree, cups, root, root, -, /usr/share/doc/cups)
> +endif
> +
> +# ----- startup files
> +ifdef PTXCONF_CUPS_SYSTEMD_UNIT
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/tmpfiles.d/cups.conf)
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/systemd/system/cups.service)
> +	@$(call install_alternative, cups, root, root, 0644, \
> +		/usr/lib/systemd/system/cups.socket)
> +	@$(call install_link, cups, ../cups.service, \
> +		/usr/lib/systemd/system/printer.target.wants/cups.service)
> +	@$(call install_link, cups, ../cups.socket, \
> +		/usr/lib/systemd/system/sockets.target.wants/cups.socket)
> +endif
> +
> +ifdef PTXCONF_CUPS_STARTSCRIPT
> +	@$(call install_alternative, cups, root, root, 0755, /etc/init.d/cups)
> +	@$(call install_link, cups, ../init.d/cups, \
> +		/etc/rc.d/$(PTXCONF_CUPS_BBINIT_LINK))
> +endif
> +
> +	@$(call install_finish, cups)
> +
> +	@$(call touch)
> +
> +# vim: ft=make ts=8 tw=80
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools Roland Hieber
@ 2017-10-28  9:57   ` Michael Olbrich
  0 siblings, 0 replies; 16+ messages in thread
From: Michael Olbrich @ 2017-10-28  9:57 UTC (permalink / raw)
  To: ptxdist

On Wed, Oct 25, 2017 at 10:57:50PM +0200, Roland Hieber wrote:
> Most printer drivers compile model-specific PPDs from a generic schema
> during the build process, using ppdc, the PPD compiler. ppdc must be
> able to find CUPS' internal include files, which are architecture-
> independent and can be used from sysroot-host.
> 
> Unfortunately, the CUPS build system is rather inflexible, so we have to
> build the whole core distribution to get a working ppdc.
> 
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> 
> Notes:
>     changes in v2 -> v3:
>      - version bump 2.2.4 -> 2.2.5 (no further config changes needed)
>      - does no longer build without multithreading (see CUPS issue #5154)
>      - configure: --libdir=/ is enough (but still needed), drop --exec-prefix
>      - $(call install) seems to delete already installed files, instead use
>        $(call compile) with additional argument "install"
>      - make targetinstall stage more silent
> 
>  rules/host-cups.in   |   7 ++++
>  rules/host-cups.make | 113 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 120 insertions(+)
>  create mode 100644 rules/host-cups.in
>  create mode 100644 rules/host-cups.make
> 
> diff --git a/rules/host-cups.in b/rules/host-cups.in
> new file mode 100644
> index 000000000..45edccada
> --- /dev/null
> +++ b/rules/host-cups.in
> @@ -0,0 +1,7 @@
> +## SECTION=hosttools_noprompt
> +
> +config HOST_CUPS
> +	tristate
> +	default ALLYES
> +
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/host-cups.make b/rules/host-cups.make
> new file mode 100644
> index 000000000..894c47e41
> --- /dev/null
> +++ b/rules/host-cups.make
> @@ -0,0 +1,113 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_CUPS) += host-cups
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#
> +# autoconf
> +#
> +# The --with-* options are only used to specify strings, --without-* does
> +# nothing. So we're omitting them here. The only exception is
> +# --with-components=core, which we are setting to only builds libcups* (which is
> +# needed by ppdc).
> +#
> +# --libdir has to end with a /, otherwise due to broken autoconf magic, the libs
> +# end up in ${prefix}/lib64, which is not what we want.
> +#
> +HOST_CUPS_CONF_TOOL	:= autoconf
> +HOST_CUPS_CONF_OPT	:= \
> +	$(HOST_AUTOCONF) \
> +	--libdir=/lib/ \
> +	--disable-mallinfo \
> +	--disable-libpaper \
> +	--disable-libusb \
> +	--disable-tcp-wrappers \
> +	--disable-acl \
> +	--disable-dbus \
> +	--disable-libtool-unsupported \
> +	--disable-debug \
> +	--disable-debug-guards \
> +	--disable-debug-printfs \
> +	--disable-unit-tests \
> +	--disable-relro \
> +	--disable-gssapi \
> +	--enable-threads \
> +	--disable-ssl \
> +	--disable-cdsassl \
> +	--disable-gnutls \
> +	--disable-pam \
> +	--disable-largefile \
> +	--disable-avahi \
> +	--disable-dnssd \
> +	--disable-launchd \
> +	--disable-systemd \
> +	--disable-upstart \
> +	--disable-page-logging \
> +	--disable-browsing \
> +	--disable-default-shared \
> +	--disable-raw-printing \
> +	--disable-webif \
> +	--with-components=core
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/host-cups.compile:
> +	@$(call targetinfo)
> +	@$(call world/compile, HOST_CUPS)
> +	@# ppdc isn't built by --with-components=core
> +	@$(call compile, HOST_CUPS, -C ${HOST_CUPS_DIR}/ppdc)
> +	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +HOST_CUPS_MAKE_ENV := \
> +	DSTROOT=$(HOST_CUPS_PKGDIR)
> +
> +$(STATEDIR)/host-cups.install:
> +	@$(call targetinfo)
> +	@$(call world/install, HOST_CUPS)
> +	@# ppdc isn't included in --with-components=core
> +	@$(call compile, HOST_CUPS, -C ${HOST_CUPS_DIR}/ppdc install)
> +	@$(call touch)
> +
> +CROSS_PPDC = $(PTXDIST_SYSROOT_CROSS)/bin/ppdc

add empty line here and use ':='.

Michael

> +$(STATEDIR)/host-cups.install.post:
> +	@$(call targetinfo)
> +	@$(call world/install.post, HOST_CUPS)
> +
> +	@( \
> +		echo '#!/bin/sh'; \
> +		echo 'CUPS_DATADIR=$(PTXDIST_SYSROOT_HOST)/share/cups $(PTXDIST_SYSROOT_HOST)/bin/ppdc "$$@"'; \
> +	) > $(CROSS_PPDC)
> +	@chmod +x $(CROSS_PPDC)
> +
> +	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/host-cups.clean:
> +	@$(call targetinfo)
> +	@$(call clean_pkg, HOST_CUPS)
> +	@rm -vf $(CROSS_PPDC)
> +
> +# vim: ft=make ts=8 tw=80
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-28  9:54   ` Michael Olbrich
@ 2017-10-31 21:17     ` Roland Hieber
  0 siblings, 0 replies; 16+ messages in thread
From: Roland Hieber @ 2017-10-31 21:17 UTC (permalink / raw)
  To: ptxdist

On 28.10.2017 11:54, Michael Olbrich wrote:
> On Wed, Oct 25, 2017 at 10:57:49PM +0200, Roland Hieber wrote:
[...]
>>
>> Notes:
>>     changes in v2 -> v3:
>>      - version bump 2.2.4 -> 2.2.5
[...]
>>
>> diff --git a/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
>> new file mode 100644
>> index 000000000..f110f5aaa
>> --- /dev/null
>> +++ b/patches/cups-2.2.4/0001-configure-allow-explicit-disabling-of-Java-PHP-Perl-.patch
>> @@ -0,0 +1,92 @@
>> +From: Roland Hieber <r.hieber@pengutronix.de>
>> +Date: Mon, 25 Sep 2017 15:00:16 +0200
>> +Subject: [PATCH] configure: allow explicit disabling of Java/PHP/Perl/Python
>> + support
>> +
>> +Currently, when configure is called with --with-java or --with-java=,
>> +auto-detection is performed. When called with --without-java, HAVE_JAVA
>> +is still being defined. This is unfortunate when cross-compiling for
>> +embedded systems, we would end up with Java on the host being
>> +auto-detected (which is not what we have on the target), or with a wrong
>> +HAVE_JAVA define. We need a way to explicitely disable scripting support
>> +for all supported languages.
>> +
>> +Forwarded: https://github.com/apple/cups/pull/5122
> 
> It seems something was done upstream. Can you cherry-pick those commits
> instead. That will simplify updating later on.

Ah, that was a leftover from 2.2.4, which is already (somehow) included
in 2.2.5 and no longer relevant.

 - Roland

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-27 17:54   ` Michael Olbrich
@ 2017-10-31 22:31     ` Roland Hieber
  2017-11-01 10:45       ` Michael Olbrich
  0 siblings, 1 reply; 16+ messages in thread
From: Roland Hieber @ 2017-10-31 22:31 UTC (permalink / raw)
  To: ptxdist

On 27.10.2017 19:54, Michael Olbrich wrote:
> On Wed, Oct 25, 2017 at 10:57:49PM +0200, Roland Hieber wrote:
>> diff --git a/rules/cups.in b/rules/cups.in
>> new file mode 100644
>> index 000000000..13b7142d6
>> --- /dev/null
>> +++ b/rules/cups.in
>> @@ -0,0 +1,113 @@
>> +## SECTION=applications
>> +
>> +menuconfig CUPS
>> +	tristate
>> +	prompt "cups                          "
>> +
>> +	select ROOTFS_VAR_LOG
>> +	select ROOTFS_VAR_RUN
>> +	select LIBC_M
>> +	select LIBC_CRYPT
>> +	select ZLIB
>> +
>> +	select LIBC_PTHREAD		if CUPS_THREADING
>> +	select SYSTEMD			if CUPS_SYSTEMD_UNIT
>> +	select LIBPAPER			if CUPS_LIBPAPER
>> +	select LIBUSB			if CUPS_LIBUSB
>> +	select DBUS			if CUPS_DBUS
>> +	select GNUTLS			if CUPS_SSL
>> +	select AVAHI			if CUPS_AVAHI
>> +	select AVAHI_LIBAVAHI_CLIENT	if CUPS_AVAHI
>> +	select ORACLE_JAVA7_JRE		if CUPS_JAVA
> 
> This is not good. ORACLE_JAVA7_JRE is the x86-only binary packages.
> Just add a comment to the help text, that some java is needed.
> 
>> +	select PERL			if CUPS_PERL
>> +	select PHP5			if CUPS_PHP
>> +	select PYTHON			if CUPS_PYTHON
> 
> Is python2 the only option or could python3 be used as well?

Python 3 is possible. But I have to pass the path to the executable to
CUPS' configure, so I would need to reconfigure CUPS if anything of
PYTHON || PYTHON3 || PYTHON3_SYMLINK changes. Is there a way to ensure
this? Same for PHP5_CGI || PHP5_CLI.

> Also, for all of these: There is no build-time dependency, right? So this
> should be 'if CUPS_??? && RUNTIME'.

Yes. Thanks for the hint.

 - Roland

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System
  2017-10-31 22:31     ` Roland Hieber
@ 2017-11-01 10:45       ` Michael Olbrich
  0 siblings, 0 replies; 16+ messages in thread
From: Michael Olbrich @ 2017-11-01 10:45 UTC (permalink / raw)
  To: ptxdist

On Tue, Oct 31, 2017 at 11:31:45PM +0100, Roland Hieber wrote:
> On 27.10.2017 19:54, Michael Olbrich wrote:
> > On Wed, Oct 25, 2017 at 10:57:49PM +0200, Roland Hieber wrote:
> >> diff --git a/rules/cups.in b/rules/cups.in
> >> new file mode 100644
> >> index 000000000..13b7142d6
> >> --- /dev/null
> >> +++ b/rules/cups.in
> >> @@ -0,0 +1,113 @@
> >> +## SECTION=applications
> >> +
> >> +menuconfig CUPS
> >> +	tristate
> >> +	prompt "cups                          "
> >> +
> >> +	select ROOTFS_VAR_LOG
> >> +	select ROOTFS_VAR_RUN
> >> +	select LIBC_M
> >> +	select LIBC_CRYPT
> >> +	select ZLIB
> >> +
> >> +	select LIBC_PTHREAD		if CUPS_THREADING
> >> +	select SYSTEMD			if CUPS_SYSTEMD_UNIT
> >> +	select LIBPAPER			if CUPS_LIBPAPER
> >> +	select LIBUSB			if CUPS_LIBUSB
> >> +	select DBUS			if CUPS_DBUS
> >> +	select GNUTLS			if CUPS_SSL
> >> +	select AVAHI			if CUPS_AVAHI
> >> +	select AVAHI_LIBAVAHI_CLIENT	if CUPS_AVAHI
> >> +	select ORACLE_JAVA7_JRE		if CUPS_JAVA
> > 
> > This is not good. ORACLE_JAVA7_JRE is the x86-only binary packages.
> > Just add a comment to the help text, that some java is needed.
> > 
> >> +	select PERL			if CUPS_PERL
> >> +	select PHP5			if CUPS_PHP
> >> +	select PYTHON			if CUPS_PYTHON
> > 
> > Is python2 the only option or could python3 be used as well?
> 
> Python 3 is possible. But I have to pass the path to the executable to
> CUPS' configure, so I would need to reconfigure CUPS if anything of
> PYTHON || PYTHON3 || PYTHON3_SYMLINK changes. Is there a way to ensure
> this? Same for PHP5_CGI || PHP5_CLI.

If really works with both, then I'd say, make it a choice (2/3/no) and
/usr/bin/python{2,3} explicitly.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration
  2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
                   ` (5 preceding siblings ...)
  2017-10-25 20:57 ` [ptxdist] [PATCH v3 7/7] cups-filters: new package: additional filters and backends for CUPS Roland Hieber
@ 2017-11-01 10:51 ` Michael Olbrich
  6 siblings, 0 replies; 16+ messages in thread
From: Michael Olbrich @ 2017-11-01 10:51 UTC (permalink / raw)
  To: ptxdist

On Wed, Oct 25, 2017 at 10:57:45PM +0200, Roland Hieber wrote:
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> 
> Notes:
>     changes in v2 -> v3:
>      - libpaper.make: ifeq -> ifdef
> 
>  patches/libpaper-1.1.24+nmu5/autogen.sh |  2 +
>  rules/libpaper.in                       | 38 ++++++++++++++++++
>  rules/libpaper.make                     | 69 +++++++++++++++++++++++++++++++++
>  3 files changed, 109 insertions(+)
>  create mode 100755 patches/libpaper-1.1.24+nmu5/autogen.sh
>  create mode 100644 rules/libpaper.in
>  create mode 100644 rules/libpaper.make
> 
> diff --git a/patches/libpaper-1.1.24+nmu5/autogen.sh b/patches/libpaper-1.1.24+nmu5/autogen.sh
> new file mode 100755
> index 000000000..5d4c48990
> --- /dev/null
> +++ b/patches/libpaper-1.1.24+nmu5/autogen.sh
> @@ -0,0 +1,2 @@
> +#!/bin/sh
> +exec autoreconf --install
> diff --git a/rules/libpaper.in b/rules/libpaper.in
> new file mode 100644
> index 000000000..b70c1000b
> --- /dev/null
> +++ b/rules/libpaper.in
> @@ -0,0 +1,38 @@
> +## SECTION=multimedia_libs
> +
> +menuconfig LIBPAPER
> +	tristate
> +	prompt "libpaper                      "
> +	select HOST_AUTOTOOLS_AUTOCONF
> +	select HOST_AUTOTOOLS_LIBTOOL

These dependencies are not necessary. The fact that autogen.sh exist
handles this implicitly.

Michael

> +	help
> +	  System-wide paper size configuration
> +
> +if LIBPAPER
> +
> +config LIBPAPER_SIZE
> +	string "default fallback paper size"
> +	default "letter"
> +	help
> +	  Paper size that is used if nothing else is specified in
> +	  /etc/papersize. Currently libpaper knows about the following formats:
> +
> +	  10x14 11x17 Comm10 DL Monarch a0 a1 a10 a2 a3 a4 a5 a6 a7 a8 a9 archA
> +	  archB archC archD archE b0 b1 b10 b2 b3 b4 b5 b6 b7 b8 b9 c2 c3 c4 c5
> +	  c6 c7 c8 csheet dsheet esheet executive flsa flse folio halfexecutive
> +	  halfletter ledger legal letter note quarto statement tabloid
> +
> +config LIBPAPER_PAPERCONFIG
> +	bool "install paperconfig"
> +	help
> +	  Install the paperconfig tool which sets the default paper size of the
> +	  system
> +
> +config LIBPAPER_PAPERCONF
> +	bool "install paperconf"
> +	help
> +	  Install the paperconf tool which prints information about a specific
> +	  paper size
> +
> +endif
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/libpaper.make b/rules/libpaper.make
> new file mode 100644
> index 000000000..c3bf16b0a
> --- /dev/null
> +++ b/rules/libpaper.make
> @@ -0,0 +1,69 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_LIBPAPER) += libpaper
> +
> +#
> +# Paths and names
> +#
> +# libpaper seems to be maintained only as a Debian package, therefore the
> +# unusual versioning.
> +#
> +LIBPAPER_VERSION	:= 1.1.24+nmu5
> +LIBPAPER_MD5		:= 38bc55688c0fc5544edaa5a951a45fbd
> +LIBPAPER		:= libpaper-$(LIBPAPER_VERSION)
> +LIBPAPER_SUFFIX		:= tar.gz
> +LIBPAPER_URL		:= http://snapshot.debian.org/archive/debian-debug/20161113T151229Z/pool/main/libp/libpaper/libpaper_$(LIBPAPER_VERSION).$(LIBPAPER_SUFFIX)
> +LIBPAPER_SOURCE		:= $(SRCDIR)/$(LIBPAPER).$(LIBPAPER_SUFFIX)
> +LIBPAPER_DIR		:= $(BUILDDIR)/$(LIBPAPER)
> +LIBPAPER_LICENSE	:= GPL-2.0
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +LIBPAPER_CONF_ENV	:= \
> +	$(CROSS_ENV) \
> +	PAPERSIZE=$(PTXCONF_LIBPAPER_SIZE)
> +#
> +# autoconf
> +#
> +LIBPAPER_CONF_TOOL := autoconf
> +#
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/libpaper.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, libpaper)
> +	@$(call install_fixup, libpaper,PRIORITY,optional)
> +	@$(call install_fixup, libpaper,SECTION,base)
> +	@$(call install_fixup, libpaper,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
> +	@$(call install_fixup, libpaper,DESCRIPTION,missing)
> +
> +	@$(call install_lib, libpaper, 0, 0, 0755, libpaper)
> +
> +ifdef PTXCONF_LIBPAPER_PAPERCONFIG
> +	@$(call install_copy, libpaper, 0, 0, 755, -, /usr/sbin/paperconfig)
> +endif
> +ifdef PTXCONF_LIBPAPER_PAPERCONF
> +	@$(call install_copy, libpaper, 0, 0, 755, -, /usr/bin/paperconf)
> +endif
> +
> +	@$(call install_finish, libpaper)
> +
> +	@$(call touch)
> +
> +# vim: ft=make ts=8 noet tw=80
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2017-11-01 10:51 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-25 20:57 [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Roland Hieber
2017-10-25 20:57 ` [ptxdist] [PATCH v3 2/7] qpdf: new package: PDF inspection library and tools Roland Hieber
2017-10-25 20:57 ` [ptxdist] [PATCH v3 3/7] poppler-data: new package: optional encoding data for poppler Roland Hieber
2017-10-25 20:57 ` [ptxdist] [PATCH v3 4/7] poppler: version bump 0.18.0 -> 0.59.0 Roland Hieber
2017-10-25 21:15   ` Roland Hieber
2017-10-28  9:46   ` Michael Olbrich
2017-10-25 20:57 ` [ptxdist] [PATCH v3 5/7] cups: new package: Common Unix Printing System Roland Hieber
2017-10-27 17:54   ` Michael Olbrich
2017-10-31 22:31     ` Roland Hieber
2017-11-01 10:45       ` Michael Olbrich
2017-10-28  9:54   ` Michael Olbrich
2017-10-31 21:17     ` Roland Hieber
2017-10-25 20:57 ` [ptxdist] [PATCH v3 6/7] host-cups: new package: CUPS host tools Roland Hieber
2017-10-28  9:57   ` Michael Olbrich
2017-10-25 20:57 ` [ptxdist] [PATCH v3 7/7] cups-filters: new package: additional filters and backends for CUPS Roland Hieber
2017-11-01 10:51 ` [ptxdist] [PATCH v3 1/7] libpaper: new package: system-wide papersize configuration Michael Olbrich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox