mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] linuxptp: Update package and configs
Date: Mon, 11 Sep 2017 11:48:43 +0200	[thread overview]
Message-ID: <20170911094843.23394-1-m.grzeschik@pengutronix.de> (raw)

Usualy we can not ensure only to use transparent clock switches.
Therefor we setup the fix option -P to the commandline to enable
the P2P mechanism in ptp4l.

The following options are highly depending on the usecase
so we remove them for the defaults.

path_trace_enabled
follow_up_info
tx_timestamp_timeout

With all other options were simple defaults the whole
config can be removed.

We also add some service files to start the ptp4l service on
specific devices. In case the ptp4l daemon is configured
we add the option to install the phc2sys daemon to adjust the
system time by ptp.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 projectroot/etc/gPTP.conf                          | 28 ----------------------
 projectroot/usr/lib/systemd/system/phc2sys.service | 10 ++++++++
 projectroot/usr/lib/systemd/system/ptp4l@.service  | 12 ++++++++++
 rules/linuxptp.in                                  | 17 +++++++++++++
 rules/linuxptp.make                                | 20 ++++++++++++++--
 5 files changed, 57 insertions(+), 30 deletions(-)
 delete mode 100644 projectroot/etc/gPTP.conf
 create mode 100644 projectroot/usr/lib/systemd/system/phc2sys.service
 create mode 100644 projectroot/usr/lib/systemd/system/ptp4l@.service

diff --git a/projectroot/etc/gPTP.conf b/projectroot/etc/gPTP.conf
deleted file mode 100644
index 5bbbaf288..000000000
--- a/projectroot/etc/gPTP.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-[global]
-#
-# Run time options
-#
-assume_two_step         1
-logging_level           6
-path_trace_enabled      1
-follow_up_info          1
-tx_timestamp_timeout    40
-use_syslog              1
-verbose                 0
-summary_interval        0
-#
-# Transport options
-#
-transportSpecific       0x1
-ptp_dst_mac             01:80:C2:00:00:0E
-p2p_dst_mac             01:80:C2:00:00:0E
-uds_address             /var/run/ptp4l
-#
-# Default interface options
-#
-network_transport       L2
-delay_mechanism         P2P
-time_stamping           hardware
-
-[eth0]
-
diff --git a/projectroot/usr/lib/systemd/system/phc2sys.service b/projectroot/usr/lib/systemd/system/phc2sys.service
new file mode 100644
index 000000000..eb8e57037
--- /dev/null
+++ b/projectroot/usr/lib/systemd/system/phc2sys.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=Precision Time Protocol system clock synchronization
+Wants=ptp4l@.service
+
+[Service]
+ExecStart=/usr/sbin/phc2sys -a -r -r
+Restart=always
+
+[Install]
+WantedBy=multi-user.target
diff --git a/projectroot/usr/lib/systemd/system/ptp4l@.service b/projectroot/usr/lib/systemd/system/ptp4l@.service
new file mode 100644
index 000000000..7cd00dc45
--- /dev/null
+++ b/projectroot/usr/lib/systemd/system/ptp4l@.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Precision Time Protocol (PTP) service
+BindsTo = sys-subsystem-net-devices-%i.device
+After = sys-subsystem-net-devices-%i.device
+
+[Service]
+Type=simple
+ExecStart=/usr/sbin/ptp4l -P -i %i
+Restart=always
+
+[Install]
+WantedBy=multi-user.target
diff --git a/rules/linuxptp.in b/rules/linuxptp.in
index 641d844c7..6d1177667 100644
--- a/rules/linuxptp.in
+++ b/rules/linuxptp.in
@@ -7,3 +7,20 @@ config LINUXPTP
 	  The Linux PTP project implements the Precision Time protocol (PTP),
 	  standardized as IEEE1588.
 
+if LINUXPTP
+
+config LINUXPTP_SYSTEMD_SERVICE
+	bool "install ptp4l and phc2sys systemd service files"
+	default y
+
+config LINUXPTP_SYSTEMD_SERVICE_PTP4L_INTF
+	string "Enable ptp4l systemd service file for this interface"
+	default "eth0"
+	depends on LINUXPTP_SYSTEMD_SERVICE
+
+config LINUXPTP_PHC2SYS_SYSTEMD_SERVICE
+	bool "Enable phc2sys systemd service file"
+	default y
+	depends on LINUXPTP_SYSTEMD_SERVICE
+
+endif
diff --git a/rules/linuxptp.make b/rules/linuxptp.make
index 59cbb5123..e7ef5507d 100644
--- a/rules/linuxptp.make
+++ b/rules/linuxptp.make
@@ -17,8 +17,8 @@ PACKAGES-$(PTXCONF_LINUXPTP) += linuxptp
 #
 # Paths and names
 #
-LINUXPTP_VERSION	:= 1.6
-LINUXPTP_MD5		:= 6aa15d83f5a35f1fd076ba9adc4e7285
+LINUXPTP_VERSION	:= 1.8
+LINUXPTP_MD5		:= 5688cdfe57932273e1dbf35b3b97b9a0
 LINUXPTP		:= linuxptp-$(LINUXPTP_VERSION)
 LINUXPTP_SUFFIX		:= tgz
 LINUXPTP_URL		:= $(call ptx/mirror, SF, linuxptp/$(LINUXPTP).$(LINUXPTP_SUFFIX))
@@ -64,8 +64,24 @@ $(STATEDIR)/linuxptp.targetinstall:
 	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/phc2sys)
 	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/pmc)
 	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/hwstamp_ctl)
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/phc_ctl)
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/timemaster)
+
 	@$(call install_alternative, linuxptp, 0, 0, 0644, /etc/gPTP.conf)
 
+ifdef PTXCONF_LINUXPTP_SYSTEMD_SERVICE
+	@$(call install_alternative, linuxptp, 0, 0, 0644, /usr/lib/systemd/system/ptp4l@.service)
+	@$(call install_alternative, linuxptp, 0, 0, 0644, /usr/lib/systemd/system/phc2sys.service)
+ifneq ($(PTXCONF_LINUXPTP_SYSTEMD_SERVICE_PTP4L_INTF),"")
+	@$(call install_link, linuxptp, ../ptp4l@.service, \
+		/usr/lib/systemd/system/multi-user.target.wants/ptp4l@$(PTXCONF_LINUXPTP_SYSTEMD_SERVICE_PTP4L_INTF).service)
+endif
+ifdef PTXCONF_LINUXPTP_PHC2SYS_SYSTEMD_SERVICE
+	@$(call install_link, linuxptp, ../phc2sys.service, \
+		/usr/lib/systemd/system/multi-user.target.wants/phc2sys.service)
+endif
+endif
+
 	@$(call install_finish, linuxptp)
 
 	@$(call touch)
-- 
2.11.0


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

                 reply	other threads:[~2017-09-11  9:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170911094843.23394-1-m.grzeschik@pengutronix.de \
    --to=m.grzeschik@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox