mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
* [ptxdist] [PATCH 01/19] busybox: version bump 1.26.2 -> 1.27.2
@ 2017-09-01 16:39 Clemens Gruber
  2017-09-01 16:39 ` [ptxdist] [PATCH 02/19] dbus: version bump 1.10.18 -> 1.10.22 Clemens Gruber
                   ` (18 more replies)
  0 siblings, 19 replies; 28+ messages in thread
From: Clemens Gruber @ 2017-09-01 16:39 UTC (permalink / raw)
  To: ptxdist; +Cc: Clemens Gruber

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
 config/busybox/Config.in                           |  47 ++--
 config/busybox/archival/Config.in                  | 113 +++++----
 config/busybox/console-tools/Config.in             |  10 +-
 config/busybox/coreutils/Config.in                 | 144 ++++++------
 config/busybox/debianutils/Config.in               |  20 +-
 config/busybox/editors/Config.in                   |  37 ++-
 config/busybox/findutils/Config.in                 |  18 +-
 config/busybox/init/Config.in                      |  34 +--
 config/busybox/libbb/Config.in                     |  17 +-
 config/busybox/loginutils/Config.in                |  36 +--
 config/busybox/miscutils/Config.in                 | 112 ++-------
 config/busybox/modutils/Config.in                  | 108 ++++-----
 config/busybox/networking/Config.in                | 142 ++++++-----
 config/busybox/networking/udhcp/Config.in          |  80 ++++---
 config/busybox/procps/Config.in                    |  52 +++--
 config/busybox/selinux/Config.in                   |   4 -
 config/busybox/shell/Config.in                     | 259 +++++++++++++--------
 config/busybox/sysklogd/Config.in                  |   2 +-
 config/busybox/util-linux/Config.in                | 146 +++++++++++-
 config/busybox/util-linux/volume_id/Config.in      | 134 -----------
 .../0200-reactivate-check-for-tty.patch            |   0
 ...mat-warning-when-building-applets-usage_p.patch |   0
 ...ystem-only-pass-real-libs-to-SELINUX_LIBS.patch |   0
 ...link-honour-SKIP_STRIP-and-don-t-strip-if.patch |   0
 patches/{busybox-1.26.2 => busybox-1.27.2}/series  |   2 +-
 rules/busybox.make                                 |   4 +-
 26 files changed, 766 insertions(+), 755 deletions(-)
 rename patches/{busybox-1.26.2 => busybox-1.27.2}/0200-reactivate-check-for-tty.patch (100%)
 rename patches/{busybox-1.26.2 => busybox-1.27.2}/0201-Fix-the-format-warning-when-building-applets-usage_p.patch (100%)
 rename patches/{busybox-1.26.2 => busybox-1.27.2}/0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch (100%)
 rename patches/{busybox-1.26.2 => busybox-1.27.2}/0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch (100%)
 rename patches/{busybox-1.26.2 => busybox-1.27.2}/series (86%)

diff --git a/config/busybox/Config.in b/config/busybox/Config.in
index b8a4d795c..a15c05cce 100644
--- a/config/busybox/Config.in
+++ b/config/busybox/Config.in
@@ -22,7 +22,7 @@ config BUSYBOX_DESKTOP
 
 	  If you are preparing your build to be used on an embedded box
 	  where you have tighter control over the entire set of userspace
-	  tools, you can unselect this option for smaller code size. 
+	  tools, you can unselect this option for smaller code size.
 
 config BUSYBOX_EXTRA_COMPAT
 	bool "Provide compatible behavior for rare corner cases (bigger code)"
@@ -33,6 +33,19 @@ config BUSYBOX_EXTRA_COMPAT
 	  some GNU extensions in libc. You probably only need this option
 	  if you plan to run busybox on desktop.
 
+config BUSYBOX_FEDORA_COMPAT
+	bool "Building for Fedora distribution"
+	default n
+	help
+	This option makes some tools behave like they do on Fedora.
+
+	At the time of this writing (2017-08) this only affects uname:
+	normally, uname -p (processor) and uname -i (platform)
+	are shown as "unknown", but with this option uname -p
+	shows the same string as uname -m (machine type),
+	and so does uname -i unless machine type is i486/i586/i686 -
+	then uname -i shows "i386".
+
 config BUSYBOX_INCLUDE_SUSv2
 	bool "Enable obsolete features removed before SUSv3"
 	default y
@@ -50,17 +63,6 @@ config BUSYBOX_USE_PORTABLE_CODE
 	  compiler other than gcc.
 	  If you do use gcc, this option may needlessly increase code size.
 
-config BUSYBOX_PLATFORM_LINUX
-	bool "Enable Linux-specific applets and features"
-	default y
-	help
-	  For the most part, busybox requires only POSIX compatibility
-	  from the target system, but some applets and features use
-	  Linux-specific interfaces.
-
-	  Answering 'N' here will disable such applets and hide the
-	  corresponding configuration options.
-
 config BUSYBOX_SHOW_USAGE
 	bool "Show applet usage messages"
 	default y
@@ -124,14 +126,14 @@ config BUSYBOX_INSTALL_NO_USR
 	  never to /usr/bin or /usr/sbin.
 
 config BUSYBOX_PAM
-	bool "Support for PAM (Pluggable Authentication Modules)"
+	bool "Support PAM (Pluggable Authentication Modules)"
 	default n
 	help
 	  Use PAM in some busybox applets (currently login and httpd) instead
 	  of direct access to password database.
 
 config BUSYBOX_LONG_OPTS
-	bool "Support for --long-options"
+	bool "Support --long-options"
 	default y
 	help
 	  Enable this if you want busybox applets to use the gnu --long-option
@@ -198,7 +200,7 @@ config BUSYBOX_PID_FILE_PATH
 	  specify a pidfile path.
 
 config BUSYBOX_FEATURE_SUID
-	bool "Support for SUID/SGID handling"
+	bool "Support SUID/SGID handling"
 	default y
 	help
 	  With this option you can install the busybox binary belonging
@@ -338,6 +340,17 @@ config BUSYBOX_FEATURE_HAVE_RPC
 	#  This is automatically selected if any of enabled applets need it.
 	#  You do not need to select it manually.
 
+config BUSYBOX_PLATFORM_LINUX
+	bool #No description makes it a hidden option
+	default n
+	#help
+	#  For the most part, busybox requires only POSIX compatibility
+	#  from the target system, but some applets and features use
+	#  Linux-specific interfaces.
+	#
+	#  This is automatically selected if any applet or feature requires
+	#  Linux-specific interfaces. You do not need to select it manually.
+
 comment 'Build Options'
 
 config BUSYBOX_STATIC
@@ -611,6 +624,8 @@ config BUSYBOX_DEBUG_SANITIZE
 	  catch bad memory accesses (e.g. buffer overflows), but will make
 	  the executable larger and slow down runtime a bit.
 
+	  This adds -fsanitize=foo options to gcc command line.
+
 	  If you aren't developing/testing busybox, say N here.
 
 config BUSYBOX_UNIT_TEST
@@ -625,7 +640,7 @@ config BUSYBOX_WERROR
 	bool "Abort compilation on any warning"
 	default n
 	help
-	  Selecting this will add -Werror to gcc command line.
+	  This adds -Werror to gcc command line.
 
 	  Most people should answer N.
 
diff --git a/config/busybox/archival/Config.in b/config/busybox/archival/Config.in
index 92abf98c9..750df33c7 100644
--- a/config/busybox/archival/Config.in
+++ b/config/busybox/archival/Config.in
@@ -9,32 +9,22 @@ menu "Archival Utilities"
 config BUSYBOX_FEATURE_SEAMLESS_XZ
 	bool "Make tar, rpm, modprobe etc understand .xz data"
 	default y
-	help
-	  Make tar, rpm, modprobe etc understand .xz data.
 
 config BUSYBOX_FEATURE_SEAMLESS_LZMA
 	bool "Make tar, rpm, modprobe etc understand .lzma data"
 	default y
-	help
-	  Make tar, rpm, modprobe etc understand .lzma data.
 
 config BUSYBOX_FEATURE_SEAMLESS_BZ2
 	bool "Make tar, rpm, modprobe etc understand .bz2 data"
 	default y
-	help
-	  Make tar, rpm, modprobe etc understand .bz2 data.
 
 config BUSYBOX_FEATURE_SEAMLESS_GZ
 	bool "Make tar, rpm, modprobe etc understand .gz data"
 	default y
-	help
-	  Make tar, rpm, modprobe etc understand .gz data.
 
 config BUSYBOX_FEATURE_SEAMLESS_Z
 	bool "Make tar, rpm, modprobe etc understand .Z data"
 	default n  # it is ancient
-	help
-	  Make tar, rpm, modprobe etc understand .Z data.
 
 config BUSYBOX_AR
 	bool "ar"
@@ -50,7 +40,7 @@ config BUSYBOX_AR
 	  probably say N here: most compilers come with their own ar utility.
 
 config BUSYBOX_FEATURE_AR_LONG_FILENAMES
-	bool "Support for long filenames (not needed for debs)"
+	bool "Support long filenames (not needed for debs)"
 	default y
 	depends on BUSYBOX_AR
 	help
@@ -74,6 +64,7 @@ config BUSYBOX_UNCOMPRESS
 config BUSYBOX_GUNZIP
 	bool "gunzip"
 	default y
+	select BUSYBOX_FEATURE_GZIP_DECOMPRESS
 	help
 	  gunzip is used to decompress archives created by gzip.
 	  You can use the `-t' option to test the integrity of
@@ -82,6 +73,7 @@ config BUSYBOX_GUNZIP
 config BUSYBOX_ZCAT
 	bool "zcat"
 	default y
+	select BUSYBOX_FEATURE_GZIP_DECOMPRESS
 	help
 	  Alias to "gunzip -c".
 
@@ -89,11 +81,10 @@ config BUSYBOX_FEATURE_GUNZIP_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on (BUSYBOX_GUNZIP || BUSYBOX_ZCAT) && BUSYBOX_LONG_OPTS
-	help
-	  Enable use of long options.
 config BUSYBOX_BUNZIP2
 	bool "bunzip2"
 	default y
+	select BUSYBOX_FEATURE_BZIP2_DECOMPRESS
 	help
 	  bunzip2 is a compression utility using the Burrows-Wheeler block
 	  sorting text compression algorithm, and Huffman coding. Compression
@@ -107,6 +98,7 @@ config BUSYBOX_BUNZIP2
 config BUSYBOX_BZCAT
 	bool "bzcat"
 	default y
+	select BUSYBOX_FEATURE_BZIP2_DECOMPRESS
 	help
 	  Alias to "bunzip2 -c".
 config BUSYBOX_UNLZMA
@@ -141,7 +133,7 @@ config BUSYBOX_LZMA
 	  IOW: you'll get lzma applet, but it will always require -d option.
 
 config BUSYBOX_FEATURE_LZMA_FAST
-	bool "Optimize unlzma for speed"
+	bool "Optimize for speed"
 	default n
 	depends on BUSYBOX_UNLZMA || BUSYBOX_LZCAT || BUSYBOX_LZMA
 	help
@@ -177,6 +169,15 @@ config BUSYBOX_BZIP2
 
 	  Unless you have a specific application which requires bzip2, you
 	  should probably say N here.
+
+config BUSYBOX_FEATURE_BZIP2_DECOMPRESS
+	bool "Enable decompression"
+	default y
+	depends on BUSYBOX_BZIP2 || BUSYBOX_BUNZIP2 || BUSYBOX_BZCAT
+	help
+	  Enable -d (--decompress) and -t (--test) options for bzip2.
+	  This will be automatically selected if bunzip2 or bzcat is
+	  enabled.
 config BUSYBOX_CPIO
 	bool "cpio"
 	default y
@@ -192,7 +193,7 @@ config BUSYBOX_CPIO
 	  should probably say N here.
 
 config BUSYBOX_FEATURE_CPIO_O
-	bool "Support for archive creation"
+	bool "Support archive creation"
 	default y
 	depends on BUSYBOX_CPIO
 	help
@@ -200,7 +201,7 @@ config BUSYBOX_FEATURE_CPIO_O
 	  format only.
 
 config BUSYBOX_FEATURE_CPIO_P
-	bool "Support for passthrough mode"
+	bool "Support passthrough mode"
 	default y
 	depends on BUSYBOX_FEATURE_CPIO_O
 	help
@@ -237,11 +238,9 @@ config BUSYBOX_FEATURE_GZIP_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_GZIP && BUSYBOX_LONG_OPTS
-	help
-	  Enable use of long options, increases size by about 106 Bytes
 
 config BUSYBOX_GZIP_FAST
-	int "Trade memory for gzip speed (0:small,slow - 2:fast,big)"
+	int "Trade memory for speed (0:small,slow - 2:fast,big)"
 	default 0
 	range 0 2
 	depends on BUSYBOX_GZIP
@@ -261,6 +260,15 @@ config BUSYBOX_FEATURE_GZIP_LEVELS
 	  is 6. If levels 1-3 are specified, 4 is used.
 	  If this option is not selected, -N options are ignored and -9
 	  is used.
+
+config BUSYBOX_FEATURE_GZIP_DECOMPRESS
+	bool "Enable decompression"
+	default y
+	depends on BUSYBOX_GZIP || BUSYBOX_GUNZIP || BUSYBOX_ZCAT
+	help
+	  Enable -d (--decompress) and -t (--test) options for gzip.
+	  This will be automatically selected if gunzip or zcat is
+	  enabled.
 config BUSYBOX_LZOP
 	bool "lzop"
 	default y
@@ -269,13 +277,13 @@ config BUSYBOX_LZOP
 
 config BUSYBOX_UNLZOP
 	bool "unlzop"
-	default y
+	default n  # INCOMPAT: upstream lzop does not provide such tool
 	help
 	  Lzop decompresion.
 
 config BUSYBOX_LZOPCAT
 	bool "lzopcat"
-	default y
+	default n  # INCOMPAT: upstream lzop does not provide such tool
 	help
 	  Alias to "unlzop -c".
 
@@ -305,13 +313,15 @@ config BUSYBOX_TAR
 	  create compressed archives. It's probably the most widely used
 	  UNIX archive program.
 
+config BUSYBOX_FEATURE_TAR_LONG_OPTIONS
+	bool "Enable long options"
+	default y
+	depends on BUSYBOX_TAR && BUSYBOX_LONG_OPTS
+
 config BUSYBOX_FEATURE_TAR_CREATE
-	bool "Enable archive creation"
+	bool "Enable -c (archive creation)"
 	default y
 	depends on BUSYBOX_TAR
-	help
-	  If you enable this option you'll be able to create
-	  tar archives using the `-c' option.
 
 config BUSYBOX_FEATURE_TAR_AUTODETECT
 	bool "Autodetect compressed tarballs"
@@ -330,7 +340,7 @@ config BUSYBOX_FEATURE_TAR_FROM
 	  a list of files to include or exclude from an archive.
 
 config BUSYBOX_FEATURE_TAR_OLDGNU_COMPATIBILITY
-	bool "Support for old tar header format"
+	bool "Support old tar header format"
 	default y
 	depends on BUSYBOX_TAR || BUSYBOX_DPKG
 	help
@@ -349,22 +359,12 @@ config BUSYBOX_FEATURE_TAR_OLDSUN_COMPATIBILITY
 	  tarballs still exist.
 
 config BUSYBOX_FEATURE_TAR_GNU_EXTENSIONS
-	bool "Support for GNU tar extensions (long filenames)"
+	bool "Support GNU tar extensions (long filenames)"
 	default y
 	depends on BUSYBOX_TAR || BUSYBOX_DPKG
-	help
-	  With this option busybox supports GNU long filenames and
-	  linknames.
-
-config BUSYBOX_FEATURE_TAR_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on BUSYBOX_TAR && BUSYBOX_LONG_OPTS
-	help
-	  Enable use of long options, increases size by about 400 Bytes
 
 config BUSYBOX_FEATURE_TAR_TO_COMMAND
-	bool "Support for writing to an external program"
+	bool "Support writing to an external program (--to-command)"
 	default y
 	depends on BUSYBOX_TAR && BUSYBOX_FEATURE_TAR_LONG_OPTIONS
 	help
@@ -377,20 +377,17 @@ config BUSYBOX_FEATURE_TAR_UNAME_GNAME
 	default y
 	depends on BUSYBOX_TAR
 	help
-	  Enables use of user and group names in tar. This affects contents
+	  Enable use of user and group names in tar. This affects contents
 	  listings (-t) and preserving permissions when unpacking (-p).
 	  +200 bytes.
 
 config BUSYBOX_FEATURE_TAR_NOPRESERVE_TIME
-	bool "Enable -m (do not preserve time) option"
+	bool "Enable -m (do not preserve time) GNU option"
 	default y
 	depends on BUSYBOX_TAR
-	help
-	  With this option busybox supports GNU tar -m
-	  (do not preserve time) option.
 
 config BUSYBOX_FEATURE_TAR_SELINUX
-	bool "Support for extracting SELinux labels"
+	bool "Support extracting SELinux labels"
 	default n
 	depends on BUSYBOX_TAR && BUSYBOX_SELINUX
 	help
@@ -403,7 +400,31 @@ config BUSYBOX_UNZIP
 	  unzip will list or extract files from a ZIP archive,
 	  commonly found on DOS/WIN systems. The default behavior
 	  (with no options) is to extract the archive into the
-	  current directory. Use the `-d' option to extract to a
-	  directory of your choice.
+	  current directory.
+
+config BUSYBOX_FEATURE_UNZIP_CDF
+	bool "Read and use Central Directory data"
+	default y
+	depends on BUSYBOX_UNZIP
+	help
+	  If you know that you only need to deal with simple
+	  ZIP files without deleted/updated files, SFX archives etc,
+	  you can reduce code size by unselecting this option.
+	  To support less trivial ZIPs, say Y.
+
+config BUSYBOX_FEATURE_UNZIP_BZIP2
+	bool "Support compression method 12 (bzip2)"
+	default y
+	depends on BUSYBOX_FEATURE_UNZIP_CDF && BUSYBOX_DESKTOP
+
+config BUSYBOX_FEATURE_UNZIP_LZMA
+	bool "Support compression method 14 (lzma)"
+	default y
+	depends on BUSYBOX_FEATURE_UNZIP_CDF && BUSYBOX_DESKTOP
+
+config BUSYBOX_FEATURE_UNZIP_XZ
+	bool "Support compression method 95 (xz)"
+	default y
+	depends on BUSYBOX_FEATURE_UNZIP_CDF && BUSYBOX_DESKTOP
 
 endmenu
diff --git a/config/busybox/console-tools/Config.in b/config/busybox/console-tools/Config.in
index ea2e77255..331a09af0 100644
--- a/config/busybox/console-tools/Config.in
+++ b/config/busybox/console-tools/Config.in
@@ -76,18 +76,14 @@ comment "Common options for loadfont and setfont"
 	depends on BUSYBOX_LOADFONT || BUSYBOX_SETFONT
 
 config BUSYBOX_FEATURE_LOADFONT_PSF2
-	bool "Support for PSF2 console fonts"
+	bool "Support PSF2 console fonts"
 	default y
 	depends on BUSYBOX_LOADFONT || BUSYBOX_SETFONT
-	help
-	  Support PSF2 console fonts.
 
 config BUSYBOX_FEATURE_LOADFONT_RAW
-	bool "Support for old (raw) console fonts"
+	bool "Support old (raw) console fonts"
 	default y
 	depends on BUSYBOX_LOADFONT || BUSYBOX_SETFONT
-	help
-	  Support old (raw) console fonts.
 config BUSYBOX_LOADKMAP
 	bool "loadkmap"
 	default y
@@ -136,8 +132,6 @@ config BUSYBOX_FEATURE_SETCONSOLE_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_SETCONSOLE && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the setconsole applet.
 config BUSYBOX_SETKEYCODES
 	bool "setkeycodes"
 	default y
diff --git a/config/busybox/coreutils/Config.in b/config/busybox/coreutils/Config.in
index 91bfc115f..f8dd7b0aa 100644
--- a/config/busybox/coreutils/Config.in
+++ b/config/busybox/coreutils/Config.in
@@ -13,23 +13,19 @@ config BUSYBOX_BASENAME
 	  basename is used to strip the directory and suffix from filenames,
 	  leaving just the filename itself. Enable this option if you wish
 	  to enable the 'basename' utility.
-config BUSYBOX_CAL
-	bool "cal"
-	default y
-	help
-	  cal is used to display a monthly calendar.
 config BUSYBOX_CAT
 	bool "cat"
 	default y
 	help
 	  cat is used to concatenate files and print them to the standard
 	  output. Enable this option if you wish to enable the 'cat' utility.
-config BUSYBOX_CATV
-	bool "catv"
+
+config BUSYBOX_FEATURE_CATV
+	bool "cat -v[etA]"
 	default y
+	depends on BUSYBOX_CAT
 	help
-	  Display nonprinting characters as escape sequences (like some
-	  implementations' cat -v option).
+	  Display nonprinting characters as escape sequences
 config BUSYBOX_CHGRP
 	bool "chgrp"
 	default y
@@ -51,8 +47,6 @@ config BUSYBOX_FEATURE_CHOWN_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_CHOWN && BUSYBOX_LONG_OPTS
-	help
-	  Enable use of long options
 config BUSYBOX_CHROOT
 	bool "chroot"
 	default y
@@ -77,11 +71,11 @@ config BUSYBOX_CP
 	  cp is used to copy files and directories.
 
 config BUSYBOX_FEATURE_CP_LONG_OPTIONS
-	bool "Enable long options for cp"
+	bool "Enable long options"
 	default y
 	depends on BUSYBOX_CP && BUSYBOX_LONG_OPTS
 	help
-	  Enable long options for cp.
+	  Enable long options.
 	  Also add support for --parents option.
 config BUSYBOX_CUT
 	bool "cut"
@@ -163,7 +157,7 @@ config BUSYBOX_FEATURE_DD_IBS_OBS
 	default y
 	depends on BUSYBOX_DD
 	help
-	  Enables support for writing a certain number of bytes in and out,
+	  Enable support for writing a certain number of bytes in and out,
 	  at a time, and performing conversions on the data stream.
 
 config BUSYBOX_FEATURE_DD_STATUS
@@ -171,7 +165,7 @@ config BUSYBOX_FEATURE_DD_STATUS
 	default y
 	depends on BUSYBOX_DD
 	help
-	  Enables support for status=noxfer/none option.
+	  Enable support for status=noxfer/none option.
 config BUSYBOX_DF
 	bool "df"
 	default y
@@ -184,11 +178,9 @@ config BUSYBOX_FEATURE_DF_FANCY
 	default y
 	depends on BUSYBOX_DF
 	help
-	  This option enables -a, -i and -B.
-
-	    -a Show all filesystems
-	    -i Inodes
-	    -B <SIZE> Blocksize
+	  -a Show all filesystems
+	  -i Inodes
+	  -B <SIZE> Blocksize
 config BUSYBOX_DIRNAME
 	bool "dirname"
 	default y
@@ -229,11 +221,9 @@ config BUSYBOX_ECHO
 
 # this entry also appears in shell/Config.in, next to the echo builtin
 config BUSYBOX_FEATURE_FANCY_ECHO
-	bool "Enable echo options (-n and -e)"
+	bool "Enable -n and -e options"
 	default y
-	depends on BUSYBOX_ECHO || BUSYBOX_ASH_BUILTIN_ECHO || BUSYBOX_HUSH
-	help
-	  This adds options (-n and -e) to echo.
+	depends on BUSYBOX_ECHO || BUSYBOX_ASH_ECHO || BUSYBOX_HUSH_ECHO
 config BUSYBOX_ENV
 	bool "env"
 	default y
@@ -246,8 +236,6 @@ config BUSYBOX_FEATURE_ENV_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_ENV && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the env applet.
 config BUSYBOX_EXPAND
 	bool "expand"
 	default y
@@ -258,8 +246,6 @@ config BUSYBOX_FEATURE_EXPAND_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_EXPAND && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the expand applet.
 
 config BUSYBOX_UNEXPAND
 	bool "unexpand"
@@ -271,8 +257,6 @@ config BUSYBOX_FEATURE_UNEXPAND_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_UNEXPAND && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the unexpand applet.
 config BUSYBOX_EXPR
 	bool "expr"
 	default y
@@ -288,6 +272,11 @@ config BUSYBOX_EXPR_MATH_SUPPORT_64
 	  Enable 64-bit math support in the expr applet. This will make
 	  the applet slightly larger, but will allow computation with very
 	  large numbers.
+config BUSYBOX_FACTOR
+	bool "factor"
+	default y
+	help
+	  factor factorizes integers
 config BUSYBOX_FALSE
 	bool "false"
 	default y
@@ -311,11 +300,9 @@ config BUSYBOX_HEAD
 	  from files.
 
 config BUSYBOX_FEATURE_FANCY_HEAD
-	bool "Enable head options (-c, -q, and -v)"
+	bool "Enable -c, -q, and -v"
 	default y
 	depends on BUSYBOX_HEAD
-	help
-	  This enables the head options (-c, -q, and -v).
 config BUSYBOX_HOSTID
 	bool "hostid"
 	default y
@@ -343,8 +330,11 @@ config BUSYBOX_FEATURE_INSTALL_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_INSTALL && BUSYBOX_LONG_OPTS
+config BUSYBOX_LINK
+	bool "link"
+	default y
 	help
-	  Support long options for the install applet.
+	  link creates hard links between files.
 config BUSYBOX_LN
 	bool "ln"
 	default y
@@ -365,22 +355,21 @@ config BUSYBOX_FEATURE_LS_FILETYPES
 	bool "Enable filetyping options (-p and -F)"
 	default y
 	depends on BUSYBOX_LS
-	help
-	  Enable the ls options (-p and -F).
 
 config BUSYBOX_FEATURE_LS_FOLLOWLINKS
 	bool "Enable symlinks dereferencing (-L)"
 	default y
 	depends on BUSYBOX_LS
-	help
-	  Enable the ls option (-L).
 
 config BUSYBOX_FEATURE_LS_RECURSIVE
 	bool "Enable recursion (-R)"
 	default y
 	depends on BUSYBOX_LS
-	help
-	  Enable the ls option (-R).
+
+config BUSYBOX_FEATURE_LS_WIDTH
+	bool "Enable -w WIDTH and window size autodetection"
+	default y
+	depends on BUSYBOX_LS
 
 config BUSYBOX_FEATURE_LS_SORTFILES
 	bool "Sort the file names"
@@ -460,7 +449,6 @@ config BUSYBOX_FEATURE_MD5_SHA1_SUM_CHECK
 	help
 	  Enabling the -c options allows files to be checked
 	  against pre-calculated hash values.
-
 	  -s and -w are useful options when verifying checksums.
 config BUSYBOX_MKDIR
 	bool "mkdir"
@@ -472,8 +460,6 @@ config BUSYBOX_FEATURE_MKDIR_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_MKDIR && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the mkdir applet.
 config BUSYBOX_MKFIFO
 	bool "mkfifo"
 	default y
@@ -486,6 +472,11 @@ config BUSYBOX_MKNOD
 	help
 	  mknod is used to create FIFOs or block/character special
 	  files with the specified names.
+config BUSYBOX_MKTEMP
+	bool "mktemp"
+	default y
+	help
+	  mktemp is used to create unique temporary files
 config BUSYBOX_MV
 	bool "mv"
 	default y
@@ -496,23 +487,37 @@ config BUSYBOX_FEATURE_MV_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_MV && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the mv applet.
 config BUSYBOX_NICE
 	bool "nice"
 	default y
 	help
 	  nice runs a program with modified scheduling priority.
+config BUSYBOX_NL
+	bool "nl"
+	default y
+	help
+	  nl is used to number lines of files.
 config BUSYBOX_NOHUP
 	bool "nohup"
 	default y
 	help
 	  run a command immune to hangups, with output to a non-tty.
+config BUSYBOX_NPROC
+	bool "nproc"
+	default y
+	help
+	  Print number of CPUs
 config BUSYBOX_OD
 	bool "od"
 	default y
 	help
 	  od is used to dump binary files in octal and other formats.
+config BUSYBOX_PASTE
+	bool "paste"
+	default y
+	help
+	  paste is used to paste lines of different files together
+	  and write the result to stdout
 config BUSYBOX_PRINTENV
 	bool "printenv"
 	default y
@@ -571,6 +576,11 @@ config BUSYBOX_SEQ
 	default y
 	help
 	  print a sequence of numbers
+config BUSYBOX_SHRED
+	bool "shred"
+	default y
+	help
+	  Overwrite a file to hide its contents, and optionally delete it
 config BUSYBOX_SHUF
 	bool "shuf"
 	default y
@@ -624,7 +634,7 @@ config BUSYBOX_SPLIT
 	bool "split"
 	default y
 	help
-	  split a file into pieces.
+	  Split a file into pieces.
 
 config BUSYBOX_FEATURE_SPLIT_FANCY
 	bool "Fancy extensions"
@@ -692,13 +702,12 @@ config BUSYBOX_TAIL
 	  from files.
 
 config BUSYBOX_FEATURE_FANCY_TAIL
-	bool "Enable extra tail options (-q, -s, -v, and -F)"
+	bool "Enable -q, -s, -v, and -F options"
 	default y
 	depends on BUSYBOX_TAIL
 	help
-	  The options (-q, -s, -v and -F) are provided by GNU tail, but
-	  are not specific in the SUSv3 standard.
-
+	  These options are provided by GNU tail, but
+	  are not specific in the SUSv3 standard:
 	    -q      Never output headers giving file names
 	    -s SEC  Wait SEC seconds between reads with -f
 	    -v      Always output headers giving file names
@@ -739,9 +748,15 @@ config BUSYBOX_TEST2
 config BUSYBOX_FEATURE_TEST_64
 	bool "Extend test to 64 bit"
 	default y
-	depends on BUSYBOX_TEST || BUSYBOX_TEST1 || BUSYBOX_TEST2 || BUSYBOX_ASH_BUILTIN_TEST || BUSYBOX_HUSH
+	depends on BUSYBOX_TEST || BUSYBOX_TEST1 || BUSYBOX_TEST2 || BUSYBOX_ASH_TEST || BUSYBOX_HUSH_TEST
 	help
 	  Enable 64-bit support in test.
+config BUSYBOX_TIMEOUT
+	bool "timeout"
+	default y
+	help
+	  Runs a program and watches it. If it does not terminate in
+	  specified number of seconds, it is sent a signal.
 config BUSYBOX_TOUCH
 	bool "touch"
 	default y
@@ -856,11 +871,11 @@ config BUSYBOX_WC
 	  in specified files.
 
 config BUSYBOX_FEATURE_WC_LARGE
-	bool "Support very large files in wc"
+	bool "Support very large counts"
 	default y
 	depends on BUSYBOX_WC
 	help
-	  Use "unsigned long long" in wc for counter variables.
+	  Use "unsigned long long" for counter variables.
 config BUSYBOX_WHO
       bool "who"
       default y
@@ -868,6 +883,13 @@ config BUSYBOX_WHO
       help
         who is used to show who is logged on.
 
+config BUSYBOX_W
+      bool "w"
+      default y
+      depends on BUSYBOX_FEATURE_UTMP
+      help
+        w is used to show who is logged on.
+
 config BUSYBOX_USERS
       bool "users"
       default y
@@ -907,25 +929,11 @@ config BUSYBOX_FEATURE_PRESERVE_HARDLINKS
 	help
 	  Allow cp and mv to preserve hard links.
 
-comment "Common options for ls, more and telnet"
-	depends on BUSYBOX_LS || BUSYBOX_MORE || BUSYBOX_TELNET
-
-config BUSYBOX_FEATURE_AUTOWIDTH
-	bool "Calculate terminal & column widths"
-	default y
-	depends on BUSYBOX_LS || BUSYBOX_MORE || BUSYBOX_TELNET
-	help
-	  This option allows utilities such as 'ls', 'more' and 'telnet'
-	  to determine the width of the screen, which can allow them to
-	  display additional text or avoid wrapping text onto the next line.
-	  If you leave this disabled, your utilities will be especially
-	  primitive and will be unable to determine the current screen width.
-
 comment "Common options for df, du, ls"
 	depends on BUSYBOX_DF || BUSYBOX_DU || BUSYBOX_LS
 
 config BUSYBOX_FEATURE_HUMAN_READABLE
-	bool "Support for human readable output (example 13k, 23M, 235G)"
+	bool "Support human readable output (example 13k, 23M, 235G)"
 	default y
 	depends on BUSYBOX_DF || BUSYBOX_DU || BUSYBOX_LS
 	help
diff --git a/config/busybox/debianutils/Config.in b/config/busybox/debianutils/Config.in
index 632c36e25..12015e095 100644
--- a/config/busybox/debianutils/Config.in
+++ b/config/busybox/debianutils/Config.in
@@ -6,11 +6,6 @@
 
 menu "Debian Utilities"
 
-config BUSYBOX_MKTEMP
-	bool "mktemp"
-	default y
-	help
-	  mktemp is used to create unique temporary files
 config BUSYBOX_PIPE_PROGRESS
 	bool "pipe_progress"
 	default y
@@ -35,8 +30,6 @@ config BUSYBOX_FEATURE_RUN_PARTS_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_RUN_PARTS && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the run-parts applet.
 
 config BUSYBOX_FEATURE_RUN_PARTS_FANCY
 	bool "Support additional arguments"
@@ -54,22 +47,19 @@ config BUSYBOX_START_STOP_DAEMON
 	  termination of system-level processes, usually the ones
 	  started during the startup of the system.
 
+config BUSYBOX_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
+	bool "Enable long options"
+	default y
+	depends on BUSYBOX_START_STOP_DAEMON && BUSYBOX_LONG_OPTS
+
 config BUSYBOX_FEATURE_START_STOP_DAEMON_FANCY
 	bool "Support additional arguments"
 	default y
 	depends on BUSYBOX_START_STOP_DAEMON
 	help
-	  Support additional arguments.
 	  -o|--oknodo ignored since we exit with 0 anyway
 	  -v|--verbose
 	  -N|--nicelevel N
-
-config BUSYBOX_FEATURE_START_STOP_DAEMON_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on BUSYBOX_START_STOP_DAEMON && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the start-stop-daemon applet.
 config BUSYBOX_WHICH
 	bool "which"
 	default y
diff --git a/config/busybox/editors/Config.in b/config/busybox/editors/Config.in
index 510cca5b1..30da5d05e 100644
--- a/config/busybox/editors/Config.in
+++ b/config/busybox/editors/Config.in
@@ -49,8 +49,6 @@ config BUSYBOX_FEATURE_DIFF_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_DIFF && BUSYBOX_LONG_OPTS
-	help
-	  Enable use of long options.
 
 config BUSYBOX_FEATURE_DIFF_DIR
 	bool "Enable directory support"
@@ -87,7 +85,7 @@ config BUSYBOX_VI
 	  you may wish to use something else.
 
 config BUSYBOX_FEATURE_VI_MAX_LEN
-	int "Maximum screen width in vi"
+	int "Maximum screen width"
 	range 256 16384
 	default 4096
 	depends on BUSYBOX_VI
@@ -96,7 +94,7 @@ config BUSYBOX_FEATURE_VI_MAX_LEN
 	  Make it smaller than 4k only if you are very limited on memory.
 
 config BUSYBOX_FEATURE_VI_8BIT
-	bool "Allow vi to display 8-bit chars (otherwise shows dots)"
+	bool "Allow to display 8-bit chars (otherwise shows dots)"
 	default n
 	depends on BUSYBOX_VI
 	help
@@ -110,7 +108,7 @@ config BUSYBOX_FEATURE_VI_COLON
 	default y
 	depends on BUSYBOX_VI
 	help
-	  Enable a limited set of colon commands for vi. This does not
+	  Enable a limited set of colon commands. This does not
 	  provide an "ex" mode.
 
 config BUSYBOX_FEATURE_VI_YANKMARK
@@ -118,16 +116,14 @@ config BUSYBOX_FEATURE_VI_YANKMARK
 	default y
 	depends on BUSYBOX_VI
 	help
-	  This will enable you to use yank and put, as well as mark in
-	  busybox vi.
+	  This will enable you to use yank and put, as well as mark.
 
 config BUSYBOX_FEATURE_VI_SEARCH
 	bool "Enable search and replace cmds"
 	default y
 	depends on BUSYBOX_VI
 	help
-	  Select this if you wish to be able to do search and replace in
-	  busybox vi.
+	  Select this if you wish to be able to do search and replace.
 
 config BUSYBOX_FEATURE_VI_REGEX_SEARCH
 	bool "Enable regex in search and replace"
@@ -141,16 +137,15 @@ config BUSYBOX_FEATURE_VI_USE_SIGNALS
 	default y
 	depends on BUSYBOX_VI
 	help
-	  Selecting this option will make busybox vi signal aware. This will
-	  make busybox vi support SIGWINCH to deal with Window Changes, catch
-	  Ctrl-Z and Ctrl-C and alarms.
+	  Selecting this option will make vi signal aware. This will support
+	  SIGWINCH to deal with Window Changes, catch ^Z and ^C and alarms.
 
 config BUSYBOX_FEATURE_VI_DOT_CMD
 	bool "Remember previous cmd and \".\" cmd"
 	default y
 	depends on BUSYBOX_VI
 	help
-	  Make busybox vi remember the last command and be able to repeat it.
+	  Make vi remember the last command and be able to repeat it.
 
 config BUSYBOX_FEATURE_VI_READONLY
 	bool "Enable -R option and \"view\" mode"
@@ -161,25 +156,23 @@ config BUSYBOX_FEATURE_VI_READONLY
 	  open a file in read-only mode.
 
 config BUSYBOX_FEATURE_VI_SETOPTS
-	bool "Enable set-able options, ai ic showmatch"
+	bool "Enable settable options, ai ic showmatch"
 	default y
 	depends on BUSYBOX_VI
 	help
 	  Enable the editor to set some (ai, ic, showmatch) options.
 
 config BUSYBOX_FEATURE_VI_SET
-	bool "Support for :set"
+	bool "Support :set"
 	default y
 	depends on BUSYBOX_VI
-	help
-	  Support for ":set".
 
 config BUSYBOX_FEATURE_VI_WIN_RESIZE
 	bool "Handle window resize"
 	default y
 	depends on BUSYBOX_VI
 	help
-	  Make busybox vi behave nicely with terminals that get resized.
+	  Behave nicely with terminals that get resized.
 
 config BUSYBOX_FEATURE_VI_ASK_TERMINAL
 	bool "Use 'tell me cursor position' ESC sequence to measure window"
@@ -190,15 +183,16 @@ config BUSYBOX_FEATURE_VI_ASK_TERMINAL
 	  this option makes vi perform a last-ditch effort to find it:
 	  position cursor to 999,999 and ask terminal to report real
 	  cursor position using "ESC [ 6 n" escape sequence, then read stdin.
-
 	  This is not clean but helps a lot on serial lines and such.
+
 config BUSYBOX_FEATURE_VI_UNDO
-	bool "Support undo command 'u'"
+	bool "Support undo command \"u\""
 	default y
 	depends on BUSYBOX_VI
 	help
 	  Support the 'u' command to undo insertion, deletion, and replacement
 	  of text.
+
 config BUSYBOX_FEATURE_VI_UNDO_QUEUE
 	bool "Enable undo operation queuing"
 	default y
@@ -209,6 +203,7 @@ config BUSYBOX_FEATURE_VI_UNDO_QUEUE
 	  reached, the contents of the queue are committed to the undo stack.
 	  This increases the size of the undo code and allows some undo
 	  operations (especially un-typing/backspacing) to be far more useful.
+
 config BUSYBOX_FEATURE_VI_UNDO_QUEUE_MAX
 	int "Maximum undo character queue size"
 	default 256
@@ -228,7 +223,7 @@ config BUSYBOX_FEATURE_ALLOW_EXEC
 	default y
 	depends on BUSYBOX_VI || BUSYBOX_AWK
 	help
-	  Enables vi and awk features which allows user to execute
+	  Enables vi and awk features which allow user to execute
 	  shell commands (using system() C call).
 
 endmenu
diff --git a/config/busybox/findutils/Config.in b/config/busybox/findutils/Config.in
index 26de6c83f..1a6a5d343 100644
--- a/config/busybox/findutils/Config.in
+++ b/config/busybox/findutils/Config.in
@@ -42,8 +42,6 @@ config BUSYBOX_FEATURE_FIND_PERM
 	bool "Enable -perm: permissions matching"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  Enable searching based on file permissions.
 
 config BUSYBOX_FEATURE_FIND_TYPE
 	bool "Enable -type: file type matching (file/dir/link/...)"
@@ -57,15 +55,11 @@ config BUSYBOX_FEATURE_FIND_XDEV
 	bool "Enable -xdev: 'stay in filesystem'"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  This option allows find to restrict searches to a single filesystem.
 
 config BUSYBOX_FEATURE_FIND_MAXDEPTH
 	bool "Enable -mindepth N and -maxdepth N"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  This option enables -mindepth N and -maxdepth N option.
 
 config BUSYBOX_FEATURE_FIND_NEWER
 	bool "Enable -newer: compare file modification times"
@@ -79,8 +73,6 @@ config BUSYBOX_FEATURE_FIND_INUM
 	bool "Enable -inum: inode number matching"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  Support the 'find -inum' option for searching by inode number.
 
 config BUSYBOX_FEATURE_FIND_EXEC
 	bool "Enable -exec: execute commands"
@@ -104,15 +96,11 @@ config BUSYBOX_FEATURE_FIND_USER
 	bool "Enable -user: username/uid matching"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  Support the 'find -user' option for searching by username or uid.
 
 config BUSYBOX_FEATURE_FIND_GROUP
 	bool "Enable -group: group/gid matching"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  Support the 'find -group' option for searching by group name or gid.
 
 config BUSYBOX_FEATURE_FIND_NOT
 	bool "Enable the 'not' (!) operator"
@@ -141,15 +129,13 @@ config BUSYBOX_FEATURE_FIND_SIZE
 	bool "Enable -size: file size matching"
 	default y
 	depends on BUSYBOX_FIND
-	help
-	  Support the 'find -size' option for searching by file size.
 
 config BUSYBOX_FEATURE_FIND_PRUNE
 	bool "Enable -prune: exclude subdirectories"
 	default y
 	depends on BUSYBOX_FIND
 	help
-	  If the file is a directory, dont descend into it. Useful for
+	  If the file is a directory, don't descend into it. Useful for
 	  exclusion .svn and CVS directories.
 
 config BUSYBOX_FEATURE_FIND_DELETE
@@ -209,7 +195,7 @@ config BUSYBOX_FGREP
 config BUSYBOX_FEATURE_GREP_CONTEXT
 	bool "Enable before and after context flags (-A, -B and -C)"
 	default y
-	depends on BUSYBOX_GREP || BUSYBOX_EGREP
+	depends on BUSYBOX_GREP || BUSYBOX_EGREP || BUSYBOX_FGREP
 	help
 	  Print the specified number of leading (-B) and/or trailing (-A)
 	  context surrounding our matching lines.
diff --git a/config/busybox/init/Config.in b/config/busybox/init/Config.in
index 70bac7d4d..4c9e13671 100644
--- a/config/busybox/init/Config.in
+++ b/config/busybox/init/Config.in
@@ -89,7 +89,7 @@ config BUSYBOX_INIT
 	  init is the first program run when the system boots.
 
 config BUSYBOX_LINUXRC
-	bool "Support running init from within an initrd (not initramfs)"
+	bool "linuxrc: support running init from initrd (not initramfs)"
 	default y
 	select BUSYBOX_FEATURE_SYSLOG
 	help
@@ -145,13 +145,15 @@ config BUSYBOX_FEATURE_INIT_SYSLOG
 	bool "Enable init to write to syslog"
 	default y
 	depends on BUSYBOX_INIT || BUSYBOX_LINUXRC
+	help
+	  If selected, some init messages are sent to syslog.
+	  Otherwise, they are sent to VT #5 if linux virtual tty is detected
+	  (if not, no separate logging is done).
 
-config BUSYBOX_FEATURE_EXTRA_QUIET
-	bool "Be _extra_ quiet on boot"
+config BUSYBOX_FEATURE_INIT_QUIET
+	bool "Be quiet on boot (no 'init started:' message)"
 	default y
 	depends on BUSYBOX_INIT || BUSYBOX_LINUXRC
-	help
-	  Prevent init from logging some messages to the console during boot.
 
 config BUSYBOX_FEATURE_INIT_COREDUMPS
 	bool "Support dumping core for child processes (debugging only)"
@@ -176,36 +178,18 @@ config BUSYBOX_INIT_TERMINAL_TYPE
 	  sets TERM to "vt102" if one is found.
 
 config BUSYBOX_FEATURE_INIT_MODIFY_CMDLINE
-	bool "Modify the command-line to \"init\""
+	bool "Clear init's command line"
 	default y
 	depends on BUSYBOX_INIT || BUSYBOX_LINUXRC
 	help
 	  When launched as PID 1 and after parsing its arguments, init
 	  wipes all the arguments but argv[0] and rewrites argv[0] to
-	  contain only "init", so that its command-line appears solely as
+	  contain only "init", so that its command line appears solely as
 	  "init" in tools such as ps.
 	  If this option is set to Y, init will keep its original behavior,
 	  otherwise, all the arguments including argv[0] will be preserved,
 	  be they parsed or ignored by init.
 	  The original command-line used to launch init can then be
 	  retrieved in /proc/1/cmdline on Linux, for example.
-config BUSYBOX_MESG
-	bool "mesg"
-	default y
-	help
-	  Mesg controls access to your terminal by others. It is typically
-	  used to allow or disallow other users to write to your terminal
-
-config BUSYBOX_FEATURE_MESG_ENABLE_ONLY_GROUP
-	bool "Enable writing to tty only by group, not by everybody"
-	default y
-	depends on BUSYBOX_MESG
-	help
-	  Usually, ttys are owned by group "tty", and "write" tool is
-	  setgid to this group. This way, "mesg y" only needs to enable
-	  "write by owning group" bit in tty mode.
-
-	  If you set this option to N, "mesg y" will enable writing
-	  by anybody at all. This is not recommended.
 
 endmenu
diff --git a/config/busybox/libbb/Config.in b/config/busybox/libbb/Config.in
index 967442436..600f089ef 100644
--- a/config/busybox/libbb/Config.in
+++ b/config/busybox/libbb/Config.in
@@ -108,24 +108,13 @@ config BUSYBOX_FEATURE_FAST_TOP
 	  but code size is slightly bigger.
 
 config BUSYBOX_FEATURE_ETC_NETWORKS
-	bool "Support for /etc/networks"
+	bool "Support /etc/networks"
 	default n
 	help
 	  Enable support for network names in /etc/networks. This is
 	  a rarely used feature which allows you to use names
 	  instead of IP/mask pairs in route command.
 
-config BUSYBOX_FEATURE_USE_TERMIOS
-	bool "Use termios to manipulate the screen"
-	default y
-	depends on BUSYBOX_MORE || BUSYBOX_TOP || BUSYBOX_POWERTOP
-	help
-	  This option allows utilities such as 'more' and 'top' to determine
-	  the size of the screen. If you leave this disabled, your utilities
-	  that display things on the screen will be especially primitive and
-	  will be unable to determine the current screen size, and will be
-	  unable to move the cursor.
-
 config BUSYBOX_FEATURE_EDITING
 	bool "Command line editing"
 	default y
@@ -185,15 +174,11 @@ config BUSYBOX_FEATURE_TAB_COMPLETION
 	bool "Tab completion"
 	default y
 	depends on BUSYBOX_FEATURE_EDITING
-	help
-	  Enable tab completion.
 
 config BUSYBOX_FEATURE_USERNAME_COMPLETION
 	bool "Username completion"
 	default y
 	depends on BUSYBOX_FEATURE_TAB_COMPLETION
-	help
-	  Enable username completion.
 
 config BUSYBOX_FEATURE_EDITING_FANCY_PROMPT
 	bool "Fancy shell prompts"
diff --git a/config/busybox/loginutils/Config.in b/config/busybox/loginutils/Config.in
index fb3edd1d4..11dd33b1b 100644
--- a/config/busybox/loginutils/Config.in
+++ b/config/busybox/loginutils/Config.in
@@ -7,7 +7,7 @@
 menu "Login/Password Management Utilities"
 
 config BUSYBOX_FEATURE_SHADOWPASSWDS
-	bool "Support for shadow passwords"
+	bool "Support shadow passwords"
 	default y
 	help
 	  Build support for shadow password in /etc/shadow. This file is only
@@ -113,15 +113,13 @@ config BUSYBOX_FEATURE_ADDGROUP_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_ADDGROUP && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the addgroup applet.
 
 config BUSYBOX_FEATURE_ADDUSER_TO_GROUP
-	bool "Support for adding users to groups"
+	bool "Support adding users to groups"
 	default y
 	depends on BUSYBOX_ADDGROUP
 	help
-	  If  called  with two non-option arguments,
+	  If called with two non-option arguments,
 	  addgroup will add an existing user to an
 	  existing group.
 config BUSYBOX_ADDUSER
@@ -134,8 +132,6 @@ config BUSYBOX_FEATURE_ADDUSER_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_ADDUSER && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the adduser applet.
 
 config BUSYBOX_FEATURE_CHECK_NAMES
 	bool "Enable sanity check on user/group names in adduser and addgroup"
@@ -179,9 +175,9 @@ config BUSYBOX_CHPASSWD
 	  and uses this information to update a group of existing users.
 
 config BUSYBOX_FEATURE_DEFAULT_PASSWD_ALGO
-	string "Default password encryption method (passwd -a, cryptpw -m parameter)"
+	string "Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG)"
 	default "des"
-	depends on BUSYBOX_PASSWD || BUSYBOX_CRYPTPW
+	depends on BUSYBOX_PASSWD || BUSYBOX_CRYPTPW || BUSYBOX_CHPASSWD
 	help
 	  Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
 config BUSYBOX_CRYPTPW
@@ -211,7 +207,7 @@ config BUSYBOX_DELGROUP
 	  Utility for deleting a group account.
 
 config BUSYBOX_FEATURE_DEL_USER_FROM_GROUP
-	bool "Support for removing users from groups"
+	bool "Support removing users from groups"
 	default y
 	depends on BUSYBOX_DELGROUP
 	help
@@ -257,7 +253,7 @@ config BUSYBOX_LOGIN_SESSION_AS_CHILD
 	  will not be cleaned up.
 
 config BUSYBOX_LOGIN_SCRIPTS
-	bool "Support for login scripts"
+	bool "Support login scripts"
 	depends on BUSYBOX_LOGIN
 	default y
 	help
@@ -265,7 +261,7 @@ config BUSYBOX_LOGIN_SCRIPTS
 	  just prior to switching from root to logged-in user.
 
 config BUSYBOX_FEATURE_NOLOGIN
-	bool "Support for /etc/nologin"
+	bool "Support /etc/nologin"
 	default y
 	depends on BUSYBOX_LOGIN
 	help
@@ -273,7 +269,7 @@ config BUSYBOX_FEATURE_NOLOGIN
 	  If it exists, non-root logins are prohibited.
 
 config BUSYBOX_FEATURE_SECURETTY
-	bool "Support for /etc/securetty"
+	bool "Support /etc/securetty"
 	default y
 	depends on BUSYBOX_LOGIN
 	help
@@ -306,19 +302,23 @@ config BUSYBOX_SU
 	help
 	  su is used to become another user during a login session.
 	  Invoked without a username, su defaults to becoming the super user.
-
-	  Note that Busybox binary must be setuid root for this applet to
+	  Note that busybox binary must be setuid root for this applet to
 	  work properly.
 
 config BUSYBOX_FEATURE_SU_SYSLOG
-	bool "Enable su to write to syslog"
+	bool "Log to syslog all attempts to use su"
 	default y
 	depends on BUSYBOX_SU
 
 config BUSYBOX_FEATURE_SU_CHECKS_SHELLS
-	bool "Enable su to check user's shell to be listed in /etc/shells"
-	depends on BUSYBOX_SU
+	bool "If user's shell is not in /etc/shells, disallow -s PROG"
 	default y
+	depends on BUSYBOX_SU
+
+config BUSYBOX_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY
+	bool "Allow blank passwords only on TTYs in /etc/securetty"
+	default n
+	depends on BUSYBOX_SU
 config BUSYBOX_SULOGIN
 	bool "sulogin"
 	default y
diff --git a/config/busybox/miscutils/Config.in b/config/busybox/miscutils/Config.in
index 311003f8e..6255c42f3 100644
--- a/config/busybox/miscutils/Config.in
+++ b/config/busybox/miscutils/Config.in
@@ -42,7 +42,7 @@ config BUSYBOX_BEEP
 
 config BUSYBOX_FEATURE_BEEP_FREQ
 	int "default frequency"
-	range 0 2147483647
+	range 20 50000	# allowing 0 here breaks the build
 	default 4000
 	depends on BUSYBOX_BEEP
 	help
@@ -121,12 +121,6 @@ config BUSYBOX_FEATURE_CHAT_CLR_ABORT
 	default y
 	help
 	  Support CLR_ABORT directive.
-config BUSYBOX_CHRT
-	bool "chrt"
-	default y
-	help
-	  manipulate real-time attributes of a process.
-	  This requires sched_{g,s}etparam support in your libc.
 config BUSYBOX_CONSPY
 	bool "conspy"
 	default y
@@ -220,7 +214,7 @@ config BUSYBOX_DEVFSD_MODLOAD
 	  the external modutils.
 
 config BUSYBOX_DEVFSD_FG_NP
-	bool "Enables the -fg and -np options"
+	bool "Enable the -fg and -np options"
 	default y
 	depends on BUSYBOX_DEVFSD
 	help
@@ -253,20 +247,6 @@ config BUSYBOX_DEVMEM
 	help
 	  devmem is a small program that reads and writes from physical
 	  memory using /dev/mem.
-config BUSYBOX_EJECT
-	bool "eject"
-	default y
-	select BUSYBOX_PLATFORM_LINUX
-	help
-	  Used to eject cdroms. (defaults to /dev/cdrom)
-
-config BUSYBOX_FEATURE_EJECT_SCSI
-	bool "SCSI support"
-	default y
-	depends on BUSYBOX_EJECT
-	help
-	  Add the -s option to eject, this allows to eject SCSI-Devices and
-	  usb-storage devices.
 config BUSYBOX_FBSPLASH
 	bool "fbsplash"
 	default y
@@ -327,7 +307,7 @@ config BUSYBOX_FEATURE_HDPARM_GET_IDENTITY
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the -I and -i options to obtain detailed information
+	  Enable the -I and -i options to obtain detailed information
 	  directly from drives about their capabilities and supported ATA
 	  feature set. If no device name is specified, hdparm will read
 	  identify data from stdin. Enabling this option will add about 16k...
@@ -337,7 +317,7 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_SCAN_HWIF
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the 'hdparm -R' option to register an IDE interface.
+	  Enable the 'hdparm -R' option to register an IDE interface.
 	  This is dangerous stuff, so you should probably say N.
 
 config BUSYBOX_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
@@ -345,7 +325,7 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the 'hdparm -U' option to un-register an IDE interface.
+	  Enable the 'hdparm -U' option to un-register an IDE interface.
 	  This is dangerous stuff, so you should probably say N.
 
 config BUSYBOX_FEATURE_HDPARM_HDIO_DRIVE_RESET
@@ -353,7 +333,7 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_DRIVE_RESET
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the 'hdparm -w' option to perform a device reset.
+	  Enable the 'hdparm -w' option to perform a device reset.
 	  This is dangerous stuff, so you should probably say N.
 
 config BUSYBOX_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
@@ -361,7 +341,7 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the 'hdparm -x' option to tristate device for hotswap,
+	  Enable the 'hdparm -x' option to tristate device for hotswap,
 	  and the '-b' option to get/set bus state. This is dangerous
 	  stuff, so you should probably say N.
 
@@ -370,7 +350,7 @@ config BUSYBOX_FEATURE_HDPARM_HDIO_GETSET_DMA
 	default y
 	depends on BUSYBOX_HDPARM
 	help
-	  Enables the 'hdparm -d' option to get/set using_dma flag.
+	  Enable the 'hdparm -d' option to get/set using_dma flag.
 config BUSYBOX_I2CGET
 	bool "i2cget"
 	default y
@@ -405,27 +385,6 @@ config BUSYBOX_INOTIFYD
 	help
 	  Simple inotify daemon. Reports filesystem changes. Requires
 	  kernel >= 2.6.13
-config BUSYBOX_IONICE
-	bool "ionice"
-	default y
-	select BUSYBOX_PLATFORM_LINUX
-	help
-	  Set/set program io scheduling class and priority
-	  Requires kernel >= 2.6.13
-config BUSYBOX_LAST
-	bool "last"
-	default y
-	depends on BUSYBOX_FEATURE_WTMP
-	help
-	  'last' displays a list of the last users that logged into the system.
-
-config BUSYBOX_FEATURE_LAST_FANCY
-	bool "Turn on output of extra information"
-	default y
-	depends on BUSYBOX_LAST
-	help
-	  'last' displays detailed information about the last users that
-	  logged into the system (mimics sysvinit last). +900 bytes.
 config BUSYBOX_LESS
 	bool "less"
 	default y
@@ -492,7 +451,6 @@ config BUSYBOX_FEATURE_LESS_ASK_TERMINAL
 	  this option makes less perform a last-ditch effort to find it:
 	  position cursor to 999,999 and ask terminal to report real
 	  cursor position using "ESC [ 6 n" escape sequence, then read stdin.
-
 	  This is not clean but helps a lot on serial lines and such.
 
 config BUSYBOX_FEATURE_LESS_DASHCMD
@@ -504,11 +462,18 @@ config BUSYBOX_FEATURE_LESS_DASHCMD
 	  less itself ('-' keyboard command).
 
 config BUSYBOX_FEATURE_LESS_LINENUMS
-	bool "Enable dynamic switching of line numbers"
+	bool "Enable -N (dynamic switching of line numbers)"
 	default y
 	depends on BUSYBOX_FEATURE_LESS_DASHCMD
+config BUSYBOX_LSSCSI
+	bool "lsscsi"
+	default y
+	#select PLATFORM_LINUX
 	help
-	  Enables "-N" command.
+	  lsscsi is a utility for displaying information about SCSI buses in the
+	  system and devices connected to them.
+
+	  This version uses sysfs (/sys/bus/scsi/devices) only.
 config BUSYBOX_MAKEDEVS
 	bool "makedevs"
 	default y
@@ -550,11 +515,6 @@ config BUSYBOX_MICROCOM
 	default y
 	help
 	  The poor man's minicom utility for chatting with serial port devices.
-config BUSYBOX_MOUNTPOINT
-	bool "mountpoint"
-	default y
-	help
-	  mountpoint checks if the directory is a mountpoint.
 config BUSYBOX_MT
 	bool "mt"
 	default y
@@ -575,6 +535,12 @@ config BUSYBOX_NANDDUMP
 	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Dump the content of raw NAND chip
+config BUSYBOX_PARTPROBE
+	bool "partprobe"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	help
+	  Ask kernel to rescan partition table.
 config BUSYBOX_RAIDAUTORUN
 	bool "raidautorun"
 	default y
@@ -632,32 +598,12 @@ config BUSYBOX_SETSERIAL
 	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Retrieve or set Linux serial port.
-config BUSYBOX_SETSID
-	bool "setsid"
-	default y
-	help
-	  setsid runs a program in a new session
 config BUSYBOX_STRINGS
 	bool "strings"
 	default y
 	help
 	  strings prints the printable character sequences for each file
 	  specified.
-config BUSYBOX_TASKSET
-	bool "taskset"
-	default n  # doesn't build on some non-x86 targets (m68k)
-	help
-	  Retrieve or set a processes's CPU affinity.
-	  This requires sched_{g,s}etaffinity support in your libc.
-
-config BUSYBOX_FEATURE_TASKSET_FANCY
-	bool "Fancy output"
-	default y
-	depends on BUSYBOX_TASKSET
-	help
-	  Add code for fancy output. This merely silences a compiler-warning
-	  and adds about 135 Bytes. May be needed for machines with alot
-	  of CPUs.
 config BUSYBOX_TIME
 	bool "time"
 	default y
@@ -665,12 +611,6 @@ config BUSYBOX_TIME
 	  The time command runs the specified program with the given arguments.
 	  When the command finishes, time writes a message to standard output
 	  giving timing statistics about this program run.
-config BUSYBOX_TIMEOUT
-	bool "timeout"
-	default y
-	help
-	  Runs a program and watches it. If it does not terminate in
-	  specified number of seconds, it is sent a signal.
 config BUSYBOX_TTYSIZE
 	bool "ttysize"
 	default y
@@ -731,12 +671,6 @@ config BUSYBOX_VOLNAME
 	default y
 	help
 	  Prints a CD-ROM volume name.
-config BUSYBOX_WALL
-	bool "wall"
-	default y
-	depends on BUSYBOX_FEATURE_UTMP
-	help
-	  Write a message to all users that are logged in.
 config BUSYBOX_WATCHDOG
 	bool "watchdog"
 	default y
diff --git a/config/busybox/modutils/Config.in b/config/busybox/modutils/Config.in
index 62e1ee439..98f0e9b05 100644
--- a/config/busybox/modutils/Config.in
+++ b/config/busybox/modutils/Config.in
@@ -9,9 +9,11 @@ menu "Linux Module Utilities"
 config BUSYBOX_MODPROBE_SMALL
 	bool "Simplified modutils"
 	default y
-	select BUSYBOX_PLATFORM_LINUX
 	help
-	  Simplified modutils.
+	  Build smaller (~1.5 kbytes), simplified module tools.
+
+	  This option by itself does not enable any applets -
+	  you need to select applets individually below.
 
 	  With this option modprobe does not require modules.dep file
 	  and does not use /etc/modules.conf file.
@@ -32,11 +34,6 @@ config BUSYBOX_MODPROBE_SMALL
 	  Additional module parameters can be stored in
 	  /etc/modules/$module_name files.
 
-	  Apart from modprobe, other utilities are also provided:
-	  - insmod is an alias to modprobe
-	  - rmmod is an alias to modprobe -r
-	  - depmod generates modules.dep.bb
-
 config BUSYBOX_DEPMOD
 	bool "depmod"
 	default y
@@ -62,7 +59,6 @@ config BUSYBOX_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
 	bool "Pretty output"
 	default y
 	depends on BUSYBOX_LSMOD && !BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  This option makes output format of lsmod adjusted to
 	  the format of module-init-tools for Linux kernel 2.6.
@@ -73,20 +69,6 @@ config BUSYBOX_MODINFO
 	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Show information about a Linux Kernel module
-config BUSYBOX_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE
-	bool "Accept module options on modprobe command line"
-	default y
-	depends on BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
-	help
-	  Allow insmod and modprobe take module options from command line.
-
-config BUSYBOX_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
-	bool "Skip loading of already loaded modules"
-	default y
-	depends on BUSYBOX_MODPROBE_SMALL
-	help
-	  Check if the module is already loaded.
 config BUSYBOX_MODPROBE
 	bool "modprobe"
 	default y
@@ -99,7 +81,6 @@ config BUSYBOX_FEATURE_MODPROBE_BLACKLIST
 	bool "Blacklist support"
 	default y
 	depends on BUSYBOX_MODPROBE && !BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Say 'y' here to enable support for the 'blacklist' command in
 	  modprobe.conf. This prevents the alias resolver to resolve
@@ -115,38 +96,34 @@ config BUSYBOX_RMMOD
 
 comment "Options common to multiple modutils"
 
+config BUSYBOX_FEATURE_CMDLINE_MODULE_OPTIONS
+	bool "Accept module options on modprobe command line"
+	default y
+	depends on BUSYBOX_INSMOD || BUSYBOX_MODPROBE
+	help
+	  Allow insmod and modprobe take module options from the applets'
+	  command line.
+
+config BUSYBOX_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED
+	bool "Skip loading of already loaded modules"
+	default y
+	depends on BUSYBOX_MODPROBE_SMALL && (BUSYBOX_DEPMOD || BUSYBOX_INSMOD || BUSYBOX_MODPROBE)
+	help
+	  Check if the module is already loaded.
+
 config BUSYBOX_FEATURE_2_4_MODULES
 	bool "Support version 2.2/2.4 Linux kernels"
 	default n
-	depends on BUSYBOX_INSMOD || BUSYBOX_RMMOD || BUSYBOX_LSMOD
-	select BUSYBOX_PLATFORM_LINUX
+	depends on (BUSYBOX_INSMOD || BUSYBOX_LSMOD || BUSYBOX_MODPROBE || BUSYBOX_RMMOD) && !BUSYBOX_MODPROBE_SMALL
 	help
 	  Support module loading for 2.2.x and 2.4.x Linux kernels.
 	  This increases size considerably. Say N unless you plan
 	  to run ancient kernels.
 
-config BUSYBOX_FEATURE_INSMOD_TRY_MMAP
-	bool "Try to load module from a mmap'ed area"
-	default n
-	depends on BUSYBOX_INSMOD || BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
-	help
-	  This option causes module loading code to try to mmap
-	  module first. If it does not work (for example,
-	  it does not work for compressed modules), module will be read
-	  (and unpacked if needed) into a memory block allocated by malloc.
-
-	  The only case when mmap works but malloc does not is when
-	  you are trying to load a big module on a very memory-constrained
-	  machine. Malloc will momentarily need 2x as much memory as mmap.
-
-	  Choosing N saves about 250 bytes of code (on 32-bit x86).
-
 config BUSYBOX_FEATURE_INSMOD_VERSION_CHECKING
 	bool "Enable module version checking"
 	default n
 	depends on BUSYBOX_FEATURE_2_4_MODULES && (BUSYBOX_INSMOD || BUSYBOX_MODPROBE)
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Support checking of versions for modules. This is used to
 	  ensure that the kernel and module are made for each other.
@@ -155,10 +132,9 @@ config BUSYBOX_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
 	bool "Add module symbols to kernel symbol table"
 	default n
 	depends on BUSYBOX_FEATURE_2_4_MODULES && (BUSYBOX_INSMOD || BUSYBOX_MODPROBE)
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  By adding module symbols to the kernel symbol table, Oops messages
-	  occuring within kernel modules can be properly debugged. By enabling
+	  occurring within kernel modules can be properly debugged. By enabling
 	  this feature, module symbols will always be added to the kernel symbol
 	  table for proper debugging support. If you are not interested in
 	  Oops messages from kernel modules, say N.
@@ -167,7 +143,6 @@ config BUSYBOX_FEATURE_INSMOD_LOADINKMEM
 	bool "In kernel memory optimization (uClinux only)"
 	default n
 	depends on BUSYBOX_FEATURE_2_4_MODULES && (BUSYBOX_INSMOD || BUSYBOX_MODPROBE)
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  This is a special uClinux only memory optimization that lets insmod
 	  load the specified kernel module directly into kernel space, reducing
@@ -178,7 +153,6 @@ config BUSYBOX_FEATURE_INSMOD_LOAD_MAP
 	bool "Enable insmod load map (-m) option"
 	default n
 	depends on BUSYBOX_FEATURE_2_4_MODULES && BUSYBOX_INSMOD
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Enabling this, one would be able to get a load map
 	  output on stdout. This makes kernel module debugging
@@ -189,8 +163,7 @@ config BUSYBOX_FEATURE_INSMOD_LOAD_MAP
 config BUSYBOX_FEATURE_INSMOD_LOAD_MAP_FULL
 	bool "Symbols in load map"
 	default y
-	depends on BUSYBOX_FEATURE_INSMOD_LOAD_MAP && !BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
+	depends on BUSYBOX_FEATURE_INSMOD_LOAD_MAP
 	help
 	  Without this option, -m will only output section
 	  load map. With this option, -m will also output
@@ -200,18 +173,32 @@ config BUSYBOX_FEATURE_CHECK_TAINTED_MODULE
 	bool "Support tainted module checking with new kernels"
 	default y
 	depends on (BUSYBOX_LSMOD || BUSYBOX_FEATURE_2_4_MODULES) && !BUSYBOX_MODPROBE_SMALL
-	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Support checking for tainted modules. These are usually binary
 	  only modules that will make the linux-kernel list ignore your
 	  support request.
 	  This option is required to support GPLONLY modules.
 
+config BUSYBOX_FEATURE_INSMOD_TRY_MMAP
+	bool "Try to load module from a mmap'ed area"
+	default n
+	depends on (BUSYBOX_INSMOD || BUSYBOX_MODPROBE) && !BUSYBOX_MODPROBE_SMALL
+	help
+	  This option causes module loading code to try to mmap
+	  module first. If it does not work (for example,
+	  it does not work for compressed modules), module will be read
+	  (and unpacked if needed) into a memory block allocated by malloc.
+
+	  The only case when mmap works but malloc does not is when
+	  you are trying to load a big module on a very memory-constrained
+	  machine. Malloc will momentarily need 2x as much memory as mmap.
+
+	  Choosing N saves about 250 bytes of code (on 32-bit x86).
+
 config BUSYBOX_FEATURE_MODUTILS_ALIAS
-	bool "Support for module.aliases file"
+	bool "Support module.aliases file"
 	default y
-	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE
-	select BUSYBOX_PLATFORM_LINUX
+	depends on (BUSYBOX_DEPMOD || BUSYBOX_MODPROBE) && !BUSYBOX_MODPROBE_SMALL
 	help
 	  Generate and parse modules.alias containing aliases for bus
 	  identifiers:
@@ -225,10 +212,9 @@ config BUSYBOX_FEATURE_MODUTILS_ALIAS
 	  Say Y if unsure.
 
 config BUSYBOX_FEATURE_MODUTILS_SYMBOLS
-	bool "Support for module.symbols file"
+	bool "Support module.symbols file"
 	default y
-	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE
-	select BUSYBOX_PLATFORM_LINUX
+	depends on (BUSYBOX_DEPMOD || BUSYBOX_MODPROBE) && !BUSYBOX_MODPROBE_SMALL
 	help
 	  Generate and parse modules.symbols containing aliases for
 	  symbol_request() kernel calls, such as:
@@ -239,7 +225,7 @@ config BUSYBOX_FEATURE_MODUTILS_SYMBOLS
 config BUSYBOX_DEFAULT_MODULES_DIR
 	string "Default directory containing modules"
 	default "/lib/modules"
-	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE || BUSYBOX_MODPROBE_SMALL || BUSYBOX_MODINFO
+	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE || BUSYBOX_MODINFO
 	help
 	  Directory that contains kernel modules.
 	  Defaults to "/lib/modules"
@@ -247,9 +233,13 @@ config BUSYBOX_DEFAULT_MODULES_DIR
 config BUSYBOX_DEFAULT_DEPMOD_FILE
 	string "Default name of modules.dep"
 	default "modules.dep"
-	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE || BUSYBOX_MODPROBE_SMALL || BUSYBOX_MODINFO
+	depends on BUSYBOX_DEPMOD || BUSYBOX_MODPROBE || BUSYBOX_MODINFO
 	help
 	  Filename that contains kernel modules dependencies.
-	  Defaults to "modules.dep"
+	  Defaults to "modules.dep".
+	  If you configured the "simplified modutils" (MODPROBE_SMALL), a
+	  ".bb" suffix will be added after this name. Do not specify ".bb"
+	  here unless you intend your depmod or modprobe to work on
+	  "modules.dep.bb.bb" or such.
 
 endmenu
diff --git a/config/busybox/networking/Config.in b/config/busybox/networking/Config.in
index fa6a318d4..b859cb9f3 100644
--- a/config/busybox/networking/Config.in
+++ b/config/busybox/networking/Config.in
@@ -101,7 +101,7 @@ config BUSYBOX_FTPD
 	bool "ftpd"
 	default y
 	help
-	  simple FTP daemon. You have to run it via inetd.
+	  Simple FTP daemon. You have to run it via inetd.
 
 config BUSYBOX_FEATURE_FTPD_WRITE
 	bool "Enable upload commands"
@@ -143,8 +143,6 @@ config BUSYBOX_FEATURE_FTPGETPUT_LONG_OPTIONS
 	bool "Enable long options in ftpget/ftpput"
 	default y
 	depends on BUSYBOX_LONG_OPTS && (BUSYBOX_FTPGET || BUSYBOX_FTPPUT)
-	help
-	  Support long options for the ftpget/ftpput applet.
 config BUSYBOX_HOSTNAME
 	bool "hostname"
 	default y
@@ -160,7 +158,7 @@ config BUSYBOX_HTTPD
 	bool "httpd"
 	default y
 	help
-	  Serve web pages via an HTTP server.
+	  HTTP server.
 
 config BUSYBOX_FEATURE_HTTPD_RANGES
 	bool "Support 'Ranges:' header"
@@ -214,7 +212,7 @@ config BUSYBOX_FEATURE_HTTPD_CGI
 	  when specific URLs are requested.
 
 config BUSYBOX_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
-	bool "Support for running scripts through an interpreter"
+	bool "Support running scripts through an interpreter"
 	default y
 	depends on BUSYBOX_FEATURE_HTTPD_CGI
 	help
@@ -243,7 +241,7 @@ config BUSYBOX_FEATURE_HTTPD_ENCODE_URL_STR
 	  "&#60Hello&#32World&#62".
 
 config BUSYBOX_FEATURE_HTTPD_ERROR_PAGES
-	bool "Support for custom error pages"
+	bool "Support custom error pages"
 	default y
 	depends on BUSYBOX_HTTPD
 	help
@@ -256,7 +254,7 @@ config BUSYBOX_FEATURE_HTTPD_ERROR_PAGES
 	  message.
 
 config BUSYBOX_FEATURE_HTTPD_PROXY
-	bool "Support for reverse proxy"
+	bool "Support reverse proxy"
 	default y
 	depends on BUSYBOX_HTTPD
 	help
@@ -268,7 +266,7 @@ config BUSYBOX_FEATURE_HTTPD_PROXY
 	  http://hostname[:port]/new/path/myfile.
 
 config BUSYBOX_FEATURE_HTTPD_GZIP
-	bool "Support for GZIP content encoding"
+	bool "Support GZIP content encoding"
 	default y
 	depends on BUSYBOX_HTTPD
 	help
@@ -383,14 +381,14 @@ config BUSYBOX_FEATURE_IFUPDOWN_IP
 	  utilities, or enable these applets in Busybox.
 
 config BUSYBOX_FEATURE_IFUPDOWN_IPV4
-	bool "Support for IPv4"
+	bool "Support IPv4"
 	default y
 	depends on BUSYBOX_IFUP || BUSYBOX_IFDOWN
 	help
 	  If you want ifup/ifdown to talk IPv4, leave this on.
 
 config BUSYBOX_FEATURE_IFUPDOWN_IPV6
-	bool "Support for IPv6"
+	bool "Support IPv6"
 	default y
 	depends on (BUSYBOX_IFUP || BUSYBOX_IFDOWN) && BUSYBOX_FEATURE_IPV6
 	help
@@ -406,7 +404,7 @@ config BUSYBOX_FEATURE_IFUPDOWN_MAPPING
 	  a weird network setup you don't need it.
 
 config BUSYBOX_FEATURE_IFUPDOWN_EXTERNAL_DHCP
-	bool "Support for external dhcp clients"
+	bool "Support external DHCP clients"
 	default n
 	depends on BUSYBOX_IFUP || BUSYBOX_IFDOWN
 	help
@@ -585,6 +583,11 @@ config BUSYBOX_IPCALC
 	  ipcalc takes an IP address and netmask and calculates the
 	  resulting broadcast, network, and host range.
 
+config BUSYBOX_FEATURE_IPCALC_LONG_OPTIONS
+	bool "Enable long options"
+	default y
+	depends on BUSYBOX_IPCALC && BUSYBOX_LONG_OPTS
+
 config BUSYBOX_FEATURE_IPCALC_FANCY
 	bool "Fancy IPCALC, more options, adds 1 kbyte"
 	default y
@@ -592,13 +595,6 @@ config BUSYBOX_FEATURE_IPCALC_FANCY
 	help
 	  Adds the options hostname, prefix and silent to the output of
 	  "ipcalc".
-
-config BUSYBOX_FEATURE_IPCALC_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on BUSYBOX_IPCALC && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the ipcalc applet.
 config BUSYBOX_FAKEIDENTD
 	bool "fakeidentd"
 	default y
@@ -680,7 +676,7 @@ config BUSYBOX_NETSTAT
 	  netstat prints information about the Linux networking subsystem.
 
 config BUSYBOX_FEATURE_NETSTAT_WIDE
-	bool "Enable wide netstat output"
+	bool "Enable wide output"
 	default y
 	depends on BUSYBOX_NETSTAT
 	help
@@ -761,6 +757,12 @@ config BUSYBOX_SLATTACH
 	help
 	  slattach is a small utility to attach network interfaces to serial
 	  lines.
+config BUSYBOX_SSL_CLIENT
+	bool "ssl_client"
+	default y
+	select BUSYBOX_TLS
+	help
+	  This tool pipes data to/from a socket, TLS-encrypting it.
 config BUSYBOX_TCPSVD
 	bool "tcpsvd"
 	default y
@@ -799,6 +801,11 @@ config BUSYBOX_FEATURE_TELNET_AUTOLOGIN
 	  remote host you are connecting to. This is useful when you need to
 	  log into a machine without telling the username (autologin). This
 	  option enables `-a' and `-l USER' arguments.
+
+config BUSYBOX_FEATURE_TELNET_WIDTH
+	bool "Enable window size autodetection"
+	default y
+	depends on BUSYBOX_TELNET
 config BUSYBOX_TELNETD
 	bool "telnetd"
 	default y
@@ -918,11 +925,9 @@ config BUSYBOX_FEATURE_TFTP_BLOCKSIZE
 	  "blksize" and "tsize" options.
 
 config BUSYBOX_FEATURE_TFTP_PROGRESS_BAR
-	bool "Enable tftp progress meter"
+	bool "Enable progress bar"
 	default y
 	depends on BUSYBOX_TFTP && BUSYBOX_FEATURE_TFTP_BLOCKSIZE
-	help
-	  Show progress bar.
 
 config BUSYBOX_TFTP_DEBUG
 	bool "Enable debug"
@@ -931,6 +936,9 @@ config BUSYBOX_TFTP_DEBUG
 	help
 	  Make tftp[d] print debugging messages on stderr.
 	  This is useful if you are diagnosing a bug in tftp[d].
+config BUSYBOX_TLS
+	bool #No description makes it a hidden option
+	default n
 config BUSYBOX_TRACEROUTE
 	bool "traceroute"
 	default y
@@ -957,8 +965,6 @@ config BUSYBOX_FEATURE_TRACEROUTE_USE_ICMP
 	bool "Enable -I option (use ICMP instead of UDP)"
 	default y
 	depends on BUSYBOX_TRACEROUTE || BUSYBOX_TRACEROUTE6
-	help
-	  Add option -I to use ICMP ECHO instead of UDP datagrams.
 config BUSYBOX_TUNCTL
 	bool "tunctl"
 	default y
@@ -986,12 +992,15 @@ config BUSYBOX_WGET
 	  wget is a utility for non-interactive download of files from HTTP
 	  and FTP servers.
 
+config BUSYBOX_FEATURE_WGET_LONG_OPTIONS
+	bool "Enable long options"
+	default y
+	depends on BUSYBOX_WGET && BUSYBOX_LONG_OPTS
+
 config BUSYBOX_FEATURE_WGET_STATUSBAR
-	bool "Enable a nifty process meter (+2k)"
+	bool "Enable progress bar (+2k)"
 	default y
 	depends on BUSYBOX_WGET
-	help
-	  Enable the transfer progress bar for wget transfers.
 
 config BUSYBOX_FEATURE_WGET_AUTHENTICATION
 	bool "Enable HTTP authentication"
@@ -1000,13 +1009,6 @@ config BUSYBOX_FEATURE_WGET_AUTHENTICATION
 	help
 	  Support authenticated HTTP transfers.
 
-config BUSYBOX_FEATURE_WGET_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on BUSYBOX_WGET && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the wget applet.
-
 config BUSYBOX_FEATURE_WGET_TIMEOUT
 	bool "Enable timeout option -T SEC"
 	default y
@@ -1021,18 +1023,59 @@ config BUSYBOX_FEATURE_WGET_TIMEOUT
 	  FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
 	  will work in addition to -T.
 
+config BUSYBOX_FEATURE_WGET_HTTPS
+	bool "Support HTTPS using internal TLS code"
+	default y
+	depends on BUSYBOX_WGET
+	select BUSYBOX_TLS
+	help
+	  wget will use internal TLS code to connect to https:// URLs.
+	  Note:
+	  On NOMMU machines, ssl_helper applet should be available
+	  in the $PATH for this to work. Make sure to select that applet.
+
+	  Note: currently, TLS code only makes TLS I/O work, it
+	  does *not* check that the peer is who it claims to be, etc.
+	  IOW: it uses peer-supplied public keys to establish encryption
+	  and signing keys, then encrypts and signs outgoing data and
+	  decrypts incoming data.
+	  It does not check signature hashes on the incoming data:
+	  this means that attackers manipulating TCP packets can
+	  send altered data and we unknowingly receive garbage.
+	  (This check might be relatively easy to add).
+	  It does not check public key's certificate:
+	  this means that the peer may be an attacker impersonating
+	  the server we think we are talking to.
+
+	  If you think this is unacceptable, consider this. As more and more
+	  servers switch to HTTPS-only operation, without such "crippled"
+	  TLS code it is *impossible* to simply download a kernel source
+	  from kernel.org. Which can in real world translate into
+	  "my small automatic tooling to build cross-compilers from sources
+	  no longer works, I need to additionally keep a local copy
+	  of ~4 megabyte source tarball of a SSL library and ~2 megabyte
+	  source "config/busybox/of wget, need to compile and built both before I can"
+	  download anything. All this despite the fact that the build
+	  is done in a QEMU sandbox on a machine with absolutely nothing
+	  worth stealing, so I don't care if someone would go to a lot
+	  of trouble to intercept my HTTPS download to send me an altered
+	  kernel tarball".
+
+	  If you still think this is unacceptable, send patches.
+
+	  If you still think this is unacceptable, do not want to send
+	  patches, but do want to waste bandwidth expaining how wrong
+	  it is, you will be ignored.
+
 config BUSYBOX_FEATURE_WGET_OPENSSL
 	bool "Try to connect to HTTPS using openssl"
 	default y
 	depends on BUSYBOX_WGET
 	help
-	  Choose how wget establishes SSL connection for https:// URLs.
-
-	  Busybox itself contains no SSL code. wget will spawn
-	  a helper program to talk over HTTPS.
+	  Try to use openssl to handle HTTPS.
 
 	  OpenSSL has a simple SSL client for debug purposes.
-	  If you select "openssl" helper, wget will effectively run:
+	  If you select this option, wget will effectively run:
 	  "openssl s_client -quiet -connect hostname:443
 	  -servername hostname 2>/dev/null" and pipe its data
 	  through it. -servername is not used if hostname is numeric.
@@ -1045,24 +1088,9 @@ config BUSYBOX_FEATURE_WGET_OPENSSL
 	  openssl is also a big binary, often dynamically linked
 	  against ~15 libraries.
 
-config BUSYBOX_FEATURE_WGET_SSL_HELPER
-	bool "Try to connect to HTTPS using ssl_helper"
-	default y
-	depends on BUSYBOX_WGET
-	help
-	  Choose how wget establishes SSL connection for https:// URLs.
-
-	  Busybox itself contains no SSL code. wget will spawn
-	  a helper program to talk over HTTPS.
-
-	  ssl_helper is a tool which can be built statically
-	  from busybox sources against a small embedded SSL library.
-	  Please see networking/ssl_helper/README.
-	  It does not require double host resolution and emits
-	  error messages to stderr.
-
-	  Precompiled static binary may be available at
-	  http://busybox.net/downloads/binaries/
+	  If openssl can't be executed, internal TLS code will be used
+	  (if you enabled it); if openssl can be executed but fails later,
+	  wget can't detect this, and download will fail.
 config BUSYBOX_WHOIS
 	bool "whois"
 	default y
diff --git a/config/busybox/networking/udhcp/Config.in b/config/busybox/networking/udhcp/Config.in
index 4be268aac..75dd99c09 100644
--- a/config/busybox/networking/udhcp/Config.in
+++ b/config/busybox/networking/udhcp/Config.in
@@ -5,35 +5,43 @@
 #
 
 config BUSYBOX_UDHCPC6
-	bool "udhcp client for DHCPv6 (udhcpc6)"
+	bool "udhcpc6 (DHCPv6 client, EXPERIMENTAL)"
 	default n  # not yet ready
 	depends on BUSYBOX_FEATURE_IPV6
 	help
 	  udhcpc6 is a DHCPv6 client
 
-config BUSYBOX_UDHCPD
-	bool "udhcp server (udhcpd)"
+config BUSYBOX_FEATURE_UDHCPC6_RFC3646
+	bool "Support RFC 3646 (DNS server and search list)"
 	default y
-	select BUSYBOX_PLATFORM_LINUX
+	depends on BUSYBOX_UDHCPC6
 	help
-	  udhcpd is a DHCP server geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
+	  List of DNS servers and domain search list can be requested with
+	  "-O dns" and "-O search". If server gives these values,
+	  they will be set in environment variables "dns" and "search".
 
-config BUSYBOX_DHCPRELAY
-	bool "dhcprelay"
+config BUSYBOX_FEATURE_UDHCPC6_RFC4704
+	bool "Support RFC 4704 (Client FQDN)"
 	default y
+	depends on BUSYBOX_UDHCPC6
 	help
-	  dhcprelay listens for dhcp requests on one or more interfaces
-	  and forwards these requests to a different interface or dhcp
-	  server.
+	  You can request FQDN to be given by server using "-O fqdn".
 
-config BUSYBOX_DUMPLEASES
-	bool "Lease display utility (dumpleases)"
+config BUSYBOX_FEATURE_UDHCPC6_RFC4833
+	bool "Support RFC 4833 (Timezones)"
 	default y
+	depends on BUSYBOX_UDHCPC6
 	help
-	  dumpleases displays the leases written out by the udhcpd server.
-	  Lease times are stored in the file by time remaining in lease, or
-	  by the absolute time that it expires in seconds from epoch.
+	  You can request POSIX timezone with "-O tz" and timezone name
+	  with "-O timezone".
+
+config BUSYBOX_UDHCPD
+	bool "udhcpd (DHCP server)"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	help
+	  udhcpd is a DHCP server geared primarily toward embedded systems,
+	  while striving to be fully functional and RFC compliant.
 
 config BUSYBOX_FEATURE_UDHCPD_WRITE_LEASES_EARLY
 	bool "Rewrite the lease file at every new acknowledge"
@@ -67,8 +75,24 @@ config BUSYBOX_DHCPD_LEASES_FILE
 	  udhcpd stores addresses in a lease file. This is the absolute path
 	  of the file. Normally it is safe to leave it untouched.
 
+config BUSYBOX_DUMPLEASES
+	bool "dumpleases"
+	default y
+	help
+	  dumpleases displays the leases written out by the udhcpd.
+	  Lease times are stored in the file by time remaining in lease, or
+	  by the absolute time that it expires in seconds from epoch.
+
+config BUSYBOX_DHCPRELAY
+	bool "dhcprelay"
+	default y
+	help
+	  dhcprelay listens for dhcp requests on one or more interfaces
+	  and forwards these requests to a different interface or dhcp
+	  server.
+
 config BUSYBOX_UDHCPC
-	bool "udhcp client (udhcpc)"
+	bool "udhcpc (DHCP client)"
 	default y
 	select BUSYBOX_PLATFORM_LINUX
 	help
@@ -99,6 +123,15 @@ config BUSYBOX_FEATURE_UDHCPC_SANITIZEOPT
 	  they will be replaced with string "bad" when exporting
 	  to the environment.
 
+config BUSYBOX_UDHCPC_DEFAULT_SCRIPT
+	string "Absolute path to config script"
+	default "/usr/share/udhcpc/default.script"
+	depends on BUSYBOX_UDHCPC
+	help
+	  This script is called after udhcpc receives an answer. See
+	  examples/udhcp for a working example. Normally it is safe
+	  to leave this untouched.
+
 config BUSYBOX_FEATURE_UDHCP_PORT
 	bool "Enable '-P port' option for udhcpd and udhcpc"
 	default n
@@ -120,7 +153,7 @@ config BUSYBOX_UDHCP_DEBUG
 	  are very verbose and useful for debugging only.
 
 config BUSYBOX_FEATURE_UDHCP_RFC3397
-	bool "Support for RFC3397 domain search (experimental)"
+	bool "Support RFC3397 domain search (experimental)"
 	default y
 	depends on BUSYBOX_UDHCPD || BUSYBOX_UDHCPC
 	help
@@ -129,22 +162,13 @@ config BUSYBOX_FEATURE_UDHCP_RFC3397
 	  and SIP servers option 120, specified in RFC 3361.
 
 config BUSYBOX_FEATURE_UDHCP_8021Q
-	bool "Support for 802.1Q VLAN parameters"
+	bool "Support 802.1Q VLAN parameters"
 	default y
 	depends on BUSYBOX_UDHCPD || BUSYBOX_UDHCPC
 	help
 	  If selected, both client and server will support passing of VLAN
 	  ID and priority via options 132 and 133 as per 802.1Q.
 
-config BUSYBOX_UDHCPC_DEFAULT_SCRIPT
-	string "Absolute path to config script"
-	default "/usr/share/udhcpc/default.script"
-	depends on BUSYBOX_UDHCPC
-	help
-	  This script is called after udhcpc receives an answer. See
-	  examples/udhcp for a working example. Normally it is safe
-	  to leave this untouched.
-
 config BUSYBOX_UDHCPC_SLACK_FOR_BUGGY_SERVERS
 	int "DHCP options slack buffer size"
 	default 80
diff --git a/config/busybox/procps/Config.in b/config/busybox/procps/Config.in
index 783d3bfc6..da93002bd 100644
--- a/config/busybox/procps/Config.in
+++ b/config/busybox/procps/Config.in
@@ -85,18 +85,18 @@ config BUSYBOX_PIDOF
 	  those id's on the standard output.
 
 config BUSYBOX_FEATURE_PIDOF_SINGLE
-	bool "Enable argument for single shot (-s)"
+	bool "Enable single shot (-s)"
 	default y
 	depends on BUSYBOX_PIDOF
 	help
-	  Support argument '-s' for returning only the first pid found.
+	  Support '-s' for returning only the first pid found.
 
 config BUSYBOX_FEATURE_PIDOF_OMIT
-	bool "Enable argument for omitting pids (-o)"
+	bool "Enable omitting pids (-o PID)"
 	default y
 	depends on BUSYBOX_PIDOF
 	help
-	  Support argument '-o' for omitting the given pids in output.
+	  Support '-o PID' for omitting the given pid(s) in output.
 	  The special pid %PPID can be used to name the parent process
 	  of the pidof, in other words the calling shell or shell script.
 config BUSYBOX_PMAP
@@ -109,6 +109,14 @@ config BUSYBOX_POWERTOP
 	default y
 	help
 	  Analyze power consumption on Intel-based laptops
+
+config BUSYBOX_FEATURE_POWERTOP_INTERACTIVE
+	bool "Accept keyboard commands"
+	default y
+	depends on BUSYBOX_POWERTOP
+	help
+	  Without this, powertop will only refresh display every 10 seconds.
+	  No keyboard commands will work, only ^C to terminate.
 config BUSYBOX_PS
 	bool "ps"
 	default y
@@ -133,19 +141,10 @@ config BUSYBOX_FEATURE_PS_LONG
 	  Adds fields PPID, RSS, START, TIME & TTY
 
 config BUSYBOX_FEATURE_PS_TIME
-	bool "Enable time and elapsed time output"
+	bool "Support -o time and -o etime output specifiers"
 	default y
 	depends on BUSYBOX_PS && BUSYBOX_DESKTOP
 	select BUSYBOX_PLATFORM_LINUX
-	help
-	  Support -o time and -o etime output specifiers.
-
-config BUSYBOX_FEATURE_PS_ADDITIONAL_COLUMNS
-	bool "Enable additional ps columns"
-	default y
-	depends on BUSYBOX_PS && BUSYBOX_DESKTOP
-	help
-	  Support -o rgroup, -o ruser, -o nice output specifiers.
 
 config BUSYBOX_FEATURE_PS_UNUSUAL_SYSTEMS
 	bool "Support Linux prior to 2.4.0 and non-ELF systems"
@@ -154,6 +153,11 @@ config BUSYBOX_FEATURE_PS_UNUSUAL_SYSTEMS
 	help
 	  Include support for measuring HZ on old kernels and non-ELF systems
 	  (if you are on Linux 2.4.0+ and use ELF, you don't need this)
+
+config BUSYBOX_FEATURE_PS_ADDITIONAL_COLUMNS
+	bool "Support -o rgroup, -o ruser, -o nice specifiers"
+	default y
+	depends on BUSYBOX_PS && BUSYBOX_DESKTOP
 config BUSYBOX_PSTREE
 	bool "pstree"
 	default y
@@ -164,12 +168,6 @@ config BUSYBOX_PWDX
 	default y
 	help
 	  Report current working directory of a process
-config BUSYBOX_RENICE
-	bool "renice"
-	default y
-	help
-	  Renice alters the scheduling priority of one or more running
-	  processes.
 config BUSYBOX_SMEMCAP
 	bool "smemcap"
 	default y
@@ -188,6 +186,14 @@ config BUSYBOX_TOP
 	  The top program provides a dynamic real-time view of a running
 	  system.
 
+config BUSYBOX_FEATURE_TOP_INTERACTIVE
+	bool "Accept keyboard commands"
+	default y
+	depends on BUSYBOX_TOP
+	help
+	  Without this, top will only refresh display every 5 seconds.
+	  No keyboard commands will work, only ^C to terminate.
+
 config BUSYBOX_FEATURE_TOP_CPU_USAGE_PERCENTAGE
 	bool "Show CPU per-process usage percentage"
 	default y
@@ -244,11 +250,11 @@ config BUSYBOX_UPTIME
 	  on, and the system load averages for the past 1, 5, and 15 minutes.
 
 config BUSYBOX_FEATURE_UPTIME_UTMP_SUPPORT
-	bool "Support for showing the number of users"
+	bool "Show the number of users"
 	default y
 	depends on BUSYBOX_UPTIME && BUSYBOX_FEATURE_UTMP
 	help
-	  Makes uptime display the number of users currently logged on.
+	  Display the number of users currently logged on.
 config BUSYBOX_WATCH
 	bool "watch"
 	default y
@@ -257,7 +263,7 @@ config BUSYBOX_WATCH
 	  output to the screen.
 
 config BUSYBOX_FEATURE_SHOW_THREADS
-	bool "Support for showing threads in ps/pstree/top"
+	bool "Support thread display in ps/pstree/top"
 	default y
 	depends on BUSYBOX_PS || BUSYBOX_TOP || BUSYBOX_PSTREE
 	help
diff --git a/config/busybox/selinux/Config.in b/config/busybox/selinux/Config.in
index 6dc3e75ea..9f062a3ed 100644
--- a/config/busybox/selinux/Config.in
+++ b/config/busybox/selinux/Config.in
@@ -18,8 +18,6 @@ config BUSYBOX_FEATURE_CHCON_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_CHCON && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the chcon applet.
 config BUSYBOX_GETENFORCE
 	bool "getenforce"
 	default n
@@ -56,8 +54,6 @@ config BUSYBOX_FEATURE_RUNCON_LONG_OPTIONS
 	bool "Enable long options"
 	default y
 	depends on BUSYBOX_RUNCON && BUSYBOX_LONG_OPTS
-	help
-	  Support long options for the runcon applet.
 config BUSYBOX_SELINUXENABLED
 	bool "selinuxenabled"
 	default n
diff --git a/config/busybox/shell/Config.in b/config/busybox/shell/Config.in
index 3d41fb5f8..201dcfeec 100644
--- a/config/busybox/shell/Config.in
+++ b/config/busybox/shell/Config.in
@@ -18,9 +18,19 @@ choice
 config BUSYBOX_SH_IS_ASH
 	depends on !BUSYBOX_NOMMU
 	bool "ash"
+	help
+	  Choose ash to be the shell executed by 'sh' name.
+	  The ash code will be built into busybox. If you don't select
+	  "ash" choice (CONFIG_ASH), this shell may only be invoked by
+	  the name 'sh' (and not 'ash').
 
 config BUSYBOX_SH_IS_HUSH
 	bool "hush"
+	help
+	  Choose hush to be the shell executed by 'sh' name.
+	  The hush code will be built into busybox. If you don't select
+	  "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+	  the name 'sh' (and not 'hush').
 
 config BUSYBOX_SH_IS_NONE
 	bool "none"
@@ -32,7 +42,8 @@ choice
 	default BUSYBOX_BASH_IS_NONE
 	help
 	  Choose which shell you want to be executed by 'bash' alias.
-	  The ash shell is the most bash compatible and full featured one.
+	  The ash shell is the most bash compatible and full featured one,
+	  although compatibility is far from being complete.
 
 	  Note that selecting this option does not switch on any bash
 	  compatibility code. It merely makes it possible to install
@@ -47,9 +58,19 @@ choice
 config BUSYBOX_BASH_IS_ASH
 	depends on !BUSYBOX_NOMMU
 	bool "ash"
+	help
+	  Choose ash to be the shell executed by 'bash' name.
+	  The ash code will be built into busybox. If you don't select
+	  "ash" choice (CONFIG_ASH), this shell may only be invoked by
+	  the name 'bash' (and not 'ash').
 
 config BUSYBOX_BASH_IS_HUSH
 	bool "hush"
+	help
+	  Choose hush to be the shell executed by 'bash' name.
+	  The hush code will be built into busybox. If you don't select
+	  "hush" choice (CONFIG_HUSH), this shell may only be invoked by
+	  the name 'bash' (and not 'hush').
 
 config BUSYBOX_BASH_IS_NONE
 	bool "none"
@@ -68,12 +89,15 @@ config BUSYBOX_ASH
 	  shell (by Herbert Xu), which was created by porting the 'ash' shell
 	  (written by Kenneth Almquist) from NetBSD.
 
+# ash options
+# note: Don't remove !NOMMU part in the next line; it would break
+# menuconfig's indenting.
+if !BUSYBOX_NOMMU && (BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH)
+
 config BUSYBOX_ASH_OPTIMIZE_FOR_SIZE
 	bool "Optimize for size instead of speed"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Compile ash for reduced size at the price of speed.
 
 config BUSYBOX_ASH_INTERNAL_GLOB
 	bool "Use internal glob() implementation"
@@ -83,6 +107,23 @@ config BUSYBOX_ASH_INTERNAL_GLOB
 	  Do not use glob() function from libc, use internal implementation.
 	  Use this if you are getting "glob.h: No such file or directory"
 	  or similar build errors.
+	  Note that as of now (2017-01), uclibc and musl glob() both have bugs
+	  which would break ash if you select N here.
+
+config BUSYBOX_ASH_BASH_COMPAT
+	bool "bash-compatible extensions"
+	default y
+	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
+
+config BUSYBOX_ASH_JOB_CONTROL
+	bool "Job control"
+	default y
+	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
+
+config BUSYBOX_ASH_ALIAS
+	bool "Alias support"
+	default y
+	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
 
 config BUSYBOX_ASH_RANDOM_SUPPORT
 	bool "Pseudorandom generator and $RANDOM variable"
@@ -100,88 +141,62 @@ config BUSYBOX_ASH_EXPAND_PRMT
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
 	help
-	  "PS#" may contain volatile content, such as backquote commands.
+	  $PS# may contain volatile content, such as backquote commands.
 	  This option recreates the prompt string from the environment
 	  variable each time it is displayed.
 
-config BUSYBOX_ASH_BASH_COMPAT
-	bool "bash-compatible extensions"
-	default y
-	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable bash-compatible extensions.
-
 config BUSYBOX_ASH_IDLE_TIMEOUT
-	bool "Idle timeout variable"
-	default n
-	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enables bash-like auto-logout after $TMOUT seconds of idle time.
-
-config BUSYBOX_ASH_JOB_CONTROL
-	bool "Job control"
+	bool "Idle timeout variable $TMOUT"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
 	help
-	  Enable job control in the ash shell.
+	  Enable bash-like auto-logout after $TMOUT seconds of idle time.
 
-config BUSYBOX_ASH_ALIAS
-	bool "Alias support"
-	default y
-	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable alias support in the ash shell.
-
-config BUSYBOX_ASH_GETOPTS
-	bool "Builtin getopt to parse positional parameters"
+config BUSYBOX_ASH_MAIL
+	bool "Check for new mail in interactive shell"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
 	help
-	  Enable support for getopts builtin in ash.
+	  Enable "check for new mail" function:
+	  if set, $BUSYBOX_MAIL file and $BUSYBOX_MAILPATH list of files
+	  are checked for mtime changes, and "you have mail"
+	  message is printed if change is detected.
 
-config BUSYBOX_ASH_BUILTIN_ECHO
-	bool "Builtin version of 'echo'"
+config BUSYBOX_ASH_ECHO
+	bool "echo builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable support for echo builtin in ash.
 
-config BUSYBOX_ASH_BUILTIN_PRINTF
-	bool "Builtin version of 'printf'"
+config BUSYBOX_ASH_PRINTF
+	bool "printf builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable support for printf builtin in ash.
 
-config BUSYBOX_ASH_BUILTIN_TEST
-	bool "Builtin version of 'test'"
+config BUSYBOX_ASH_TEST
+	bool "test builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable support for test builtin in ash.
 
 config BUSYBOX_ASH_HELP
 	bool "help builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable help builtin in ash.
 
-config BUSYBOX_ASH_CMDCMD
-	bool "'command' command to override shell builtins"
+config BUSYBOX_ASH_GETOPTS
+	bool "getopts builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
-	help
-	  Enable support for the ash 'command' builtin, which allows
-	  you to run the specified command with the specified arguments,
-	  even when there is an ash builtin command with the same name.
 
-config BUSYBOX_ASH_MAIL
-	bool "Check for new mail on interactive shells"
+config BUSYBOX_ASH_CMDCMD
+	bool "command builtin"
 	default y
 	depends on BUSYBOX_ASH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH
 	help
-	  Enable "check for new mail" function in the ash shell.
+	  Enable support for the 'command' builtin, which allows
+	  you to run the specified command or builtin,
+	  even when there is a function with the same name.
+
+endif # ash options
 config BUSYBOX_CTTYHACK
 	bool "cttyhack"
 	default y
@@ -243,8 +258,6 @@ config BUSYBOX_HUSH_BASH_COMPAT
 	bool "bash-compatible extensions"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
-	help
-	  Enable bash-compatible extensions.
 
 config BUSYBOX_HUSH_BRACE_EXPANSION
 	bool "Brace expansion"
@@ -253,13 +266,6 @@ config BUSYBOX_HUSH_BRACE_EXPANSION
 	help
 	  Enable {abc,def} extension.
 
-config BUSYBOX_HUSH_HELP
-	bool "help builtin"
-	default y
-	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
-	help
-	  Enable help builtin in hush. Code size + ~1 kbyte.
-
 config BUSYBOX_HUSH_INTERACTIVE
 	bool "Interactive mode"
 	default y
@@ -274,8 +280,6 @@ config BUSYBOX_HUSH_SAVEHISTORY
 	bool "Save command history to .hush_history"
 	default y
 	depends on BUSYBOX_HUSH_INTERACTIVE && BUSYBOX_FEATURE_EDITING_SAVEHISTORY
-	help
-	  Enable history saving in hush.
 
 config BUSYBOX_HUSH_JOB
 	bool "Job control"
@@ -289,42 +293,38 @@ config BUSYBOX_HUSH_JOB
 	  but no separate process group is formed.
 
 config BUSYBOX_HUSH_TICK
-	bool "Process substitution"
+	bool "Support process substitution"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
 	help
-	  Enable process substitution `command` and $(command) in hush.
+	  Enable `command` and $(command).
 
 config BUSYBOX_HUSH_IF
 	bool "Support if/then/elif/else/fi"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
-	help
-	  Enable if/then/elif/else/fi in hush.
 
 config BUSYBOX_HUSH_LOOPS
 	bool "Support for, while and until loops"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
-	help
-	  Enable for, while and until loops in hush.
 
 config BUSYBOX_HUSH_CASE
 	bool "Support case ... esac statement"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
 	help
-	  Enable case ... esac statement in hush. +400 bytes.
+	  Enable case ... esac statement. +400 bytes.
 
 config BUSYBOX_HUSH_FUNCTIONS
 	bool "Support funcname() { commands; } syntax"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
 	help
-	  Enable support for shell functions in hush. +800 bytes.
+	  Enable support for shell functions. +800 bytes.
 
 config BUSYBOX_HUSH_LOCAL
-	bool "Support local builtin"
+	bool "local builtin"
 	default y
 	depends on BUSYBOX_HUSH_FUNCTIONS
 	help
@@ -338,20 +338,95 @@ config BUSYBOX_HUSH_RANDOM_SUPPORT
 	  Enable pseudorandom generator and dynamic variable "$RANDOM".
 	  Each read of "$RANDOM" will generate a new pseudorandom value.
 
+config BUSYBOX_HUSH_MODE_X
+	bool "Support 'hush -x' option and 'set -x' command"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+	help
+	  This instructs hush to print commands before execution.
+	  Adds ~300 bytes.
+
+config BUSYBOX_HUSH_ECHO
+	bool "echo builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_PRINTF
+	bool "printf builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_TEST
+	bool "test builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_HELP
+	bool "help builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_EXPORT
+	bool "export builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
 config BUSYBOX_HUSH_EXPORT_N
 	bool "Support 'export -n' option"
 	default y
-	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+	depends on BUSYBOX_HUSH_EXPORT
 	help
 	  export -n unexports variables. It is a bash extension.
 
-config BUSYBOX_HUSH_MODE_X
-	bool "Support 'hush -x' option and 'set -x' command"
+config BUSYBOX_HUSH_KILL
+	bool "kill builtin (supports kill %jobspec)"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_WAIT
+	bool "wait builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_TRAP
+	bool "trap builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_TYPE
+	bool "type builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_READ
+	bool "read builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_SET
+	bool "set builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_UNSET
+	bool "unset builtin"
 	default y
 	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
-	help
-	  This instructs hush to print commands before execution.
-	  Adds ~300 bytes.
+
+config BUSYBOX_HUSH_ULIMIT
+	bool "ulimit builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_UMASK
+	bool "umask builtin"
+	default y
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
+config BUSYBOX_HUSH_MEMLEAK
+	bool "memleak builtin (debugging)"
+	default n
+	depends on BUSYBOX_HUSH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
 
 config BUSYBOX_MSH
 	bool "msh (deprecated: aliased to hush)"
@@ -361,6 +436,9 @@ config BUSYBOX_MSH
 	  msh is deprecated and will be removed, please migrate to hush.
 
 
+comment "Options common to all shells"
+if BUSYBOX_ASH || BUSYBOX_HUSH || BUSYBOX_SH_IS_ASH || BUSYBOX_BASH_IS_ASH || BUSYBOX_SH_IS_HUSH || BUSYBOX_BASH_IS_HUSH
+
 config BUSYBOX_FEATURE_SH_MATH
 	bool "POSIX math support"
 	default y
@@ -399,23 +477,11 @@ config BUSYBOX_FEATURE_SH_STANDALONE
 	  for use as a rescue shell, in the event that you screw up your system.
 
 	  This is implemented by re-execing /proc/self/exe (typically)
-	  with right parameters. Some selected applets ("NOFORK" applets)
-	  can even be executed without creating new process.
-	  Instead, busybox will call <applet>_main() internally.
-
-	  However, this causes problems in chroot jails without mounted /proc
-	  and with ps/top (command name can be shown as 'exe' for applets
-	  started this way).
-# untrue?
-#	  Note that this will *also* cause applets to take precedence
-#	  over shell builtins of the same name. So turning this on will
-#	  eliminate any performance gained by turning on the builtin "echo"
-#	  and "test" commands in ash.
-# untrue?
-#	  Note that when using this option, the shell will attempt to directly
-#	  run '/bin/busybox'. If you do not have the busybox binary sitting in
-#	  that exact location with that exact name, this option will not work at
-#	  all.
+	  with right parameters.
+
+	  However, there are drawbacks: it is problematic in chroot jails
+	  without mounted /proc, and ps/top may show command name as 'exe'
+	  for applets started this way.
 
 config BUSYBOX_FEATURE_SH_NOFORK
 	bool "Run 'nofork' applets directly"
@@ -444,5 +510,6 @@ config BUSYBOX_FEATURE_SH_HISTFILESIZE
 	  to set shell history size. Note that its max value is capped
 	  by "History size" setting in library tuning section.
 
+endif # Options common to all shells
 
 endmenu
diff --git a/config/busybox/sysklogd/Config.in b/config/busybox/sysklogd/Config.in
index 6ebb77d06..513adc0f2 100644
--- a/config/busybox/sysklogd/Config.in
+++ b/config/busybox/sysklogd/Config.in
@@ -58,7 +58,7 @@ config BUSYBOX_FEATURE_LOGREAD_REDUCED_LOCKING
 	default y
 	depends on BUSYBOX_LOGREAD
 	help
-	  'logread' ouput to slow serial terminals can have
+	  'logread' output to slow serial terminals can have
 	  side effects on syslog because of the semaphore.
 	  This option make logread to double buffer copy
 	  from circular buffer, minimizing semaphore
diff --git a/config/busybox/util-linux/Config.in b/config/busybox/util-linux/Config.in
index 9968f3489..dc878e670 100644
--- a/config/busybox/util-linux/Config.in
+++ b/config/busybox/util-linux/Config.in
@@ -54,6 +54,17 @@ config BUSYBOX_BLOCKDEV
 	default y
 	help
 	  Performs some ioctls with block devices.
+config BUSYBOX_CAL
+	bool "cal"
+	default y
+	help
+	  cal is used to display a monthly calendar.
+config BUSYBOX_CHRT
+	bool "chrt"
+	default y
+	help
+	  manipulate real-time attributes of a process.
+	  This requires sched_{g,s}etparam support in your libc.
 config BUSYBOX_DMESG
 	bool "dmesg"
 	default y
@@ -68,7 +79,7 @@ config BUSYBOX_DMESG
 	  wish to enable the 'dmesg' utility.
 
 config BUSYBOX_FEATURE_DMESG_PRETTY
-	bool "Pretty dmesg output"
+	bool "Pretty output"
 	default y
 	depends on BUSYBOX_DMESG
 	help
@@ -87,6 +98,25 @@ config BUSYBOX_FEATURE_DMESG_PRETTY
 	    <5>Linux version 2.6.17.4 .....
 	    <6>BIOS-provided physical RAM map:
 	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+config BUSYBOX_EJECT
+	bool "eject"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	help
+	  Used to eject cdroms. (defaults to /dev/cdrom)
+
+config BUSYBOX_FEATURE_EJECT_SCSI
+	bool "SCSI support"
+	default y
+	depends on BUSYBOX_EJECT
+	help
+	  Add the -s option to eject, this allows to eject SCSI-Devices and
+	  usb-storage devices.
+config BUSYBOX_FALLOCATE
+	bool "fallocate"
+	default y
+	help
+	  Preallocate space for files.
 config BUSYBOX_FATATTR
 	bool "fatattr"
 	default y
@@ -104,7 +134,7 @@ config BUSYBOX_FBSET
 	  if you wish to enable the 'fbset' utility.
 
 config BUSYBOX_FEATURE_FBSET_FANCY
-	bool "Turn on extra fbset options"
+	bool "Enable extra options"
 	default y
 	depends on BUSYBOX_FBSET
 	help
@@ -114,7 +144,7 @@ config BUSYBOX_FEATURE_FBSET_FANCY
 	  options.
 
 config BUSYBOX_FEATURE_FBSET_READMODE
-	bool "Turn on fbset readmode support"
+	bool "Enable readmode support"
 	default y
 	depends on BUSYBOX_FBSET
 	help
@@ -142,8 +172,6 @@ config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
 	default y
 	depends on BUSYBOX_FDISK
 	depends on !BUSYBOX_LFS   # with LFS no special code is needed
-	help
-	  Enable this option to support large disks > 4GB.
 
 config BUSYBOX_FEATURE_FDISK_WRITABLE
 	bool "Write support"
@@ -251,6 +279,13 @@ config BUSYBOX_FSCK_MINIX
 	  power goes off in the middle of a write. This utility allows you to
 	  check for and attempt to repair any corruption that occurs to a minix
 	  filesystem.
+config BUSYBOX_FSFREEZE
+	bool "fsfreeze"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	select BUSYBOX_LONG_OPTS
+	help
+	  Halt new accesses and flush writes on a mounted filesystem.
 config BUSYBOX_FSTRIM
 	bool "fstrim"
 	default y
@@ -296,6 +331,12 @@ config BUSYBOX_HD
 	default y
 	help
 	  hd is an alias to hexdump -C.
+config BUSYBOX_XXD
+	bool "xxd"
+	default y
+	help
+	  The xxd utility is used to display binary data in a readable
+	  way that is comparable to the output from most hex editors.
 config BUSYBOX_HWCLOCK
 	bool "hwclock"
 	default y
@@ -310,10 +351,6 @@ config BUSYBOX_FEATURE_HWCLOCK_LONG_OPTIONS
 	bool "Support long options (--hctosys,...)"
 	default y
 	depends on BUSYBOX_HWCLOCK && BUSYBOX_LONG_OPTS
-	help
-	  By default, the hwclock utility only uses short options. If you
-	  are overly fond of its long options, such as --hctosys, --utc, etc)
-	  then enable this option.
 
 config BUSYBOX_FEATURE_HWCLOCK_ADJTIME_FHS
 	bool "Use FHS /var/lib/hwclock/adjtime"
@@ -326,6 +363,13 @@ config BUSYBOX_FEATURE_HWCLOCK_ADJTIME_FHS
 	  classic /etc/adjtime path.
 
 	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+config BUSYBOX_IONICE
+	bool "ionice"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	help
+	  Set/set program io scheduling class and priority
+	  Requires kernel >= 2.6.13
 config BUSYBOX_IPCRM
 	bool "ipcrm"
 	default y
@@ -340,6 +384,20 @@ config BUSYBOX_IPCS
 	help
 	  The ipcs utility is used to provide information on the currently
 	  allocated System V interprocess (IPC) objects in the system.
+config BUSYBOX_LAST
+	bool "last"
+	default y
+	depends on BUSYBOX_FEATURE_WTMP
+	help
+	  'last' displays a list of the last users that logged into the system.
+
+config BUSYBOX_FEATURE_LAST_FANCY
+	bool "Output extra information"
+	default y
+	depends on BUSYBOX_LAST
+	help
+	  'last' displays detailed information about the last users that
+	  logged into the system (mimics sysvinit last). +900 bytes.
 config BUSYBOX_LOSETUP
 	bool "losetup"
 	default y
@@ -423,6 +481,24 @@ config BUSYBOX_FEATURE_MDEV_LOAD_FIRMWARE
 	  These devices will request userspace look up the files in
 	  /lib/firmware/ and if it exists, send it to the kernel for
 	  loading into the hardware.
+config BUSYBOX_MESG
+	bool "mesg"
+	default y
+	help
+	  Mesg controls access to your terminal by others. It is typically
+	  used to allow or disallow other users to write to your terminal
+
+config BUSYBOX_FEATURE_MESG_ENABLE_ONLY_GROUP
+	bool "Enable writing to tty only by group, not by everybody"
+	default y
+	depends on BUSYBOX_MESG
+	help
+	  Usually, ttys are owned by group "tty", and "write" tool is
+	  setgid to this group. This way, "mesg y" only needs to enable
+	  "write by owning group" bit in tty mode.
+
+	  If you set this option to N, "mesg y" will enable writing
+	  by anybody at all. This is not recommended.
 config BUSYBOX_MKE2FS
 	bool "mke2fs"
 	default y
@@ -574,7 +650,7 @@ config BUSYBOX_FEATURE_MOUNT_CIFS
 
 config BUSYBOX_FEATURE_MOUNT_FLAGS
 	depends on BUSYBOX_MOUNT
-	bool "Support lots of -o flags in mount"
+	bool "Support lots of -o flags"
 	default y
 	help
 	  Without this, mount only supports ro/rw/remount. With this, it
@@ -595,6 +671,11 @@ config BUSYBOX_FEATURE_MOUNT_OTHERTAB
 	default y
 	help
 	  Support mount -T (specifying an alternate fstab)
+config BUSYBOX_MOUNTPOINT
+	bool "mountpoint"
+	default y
+	help
+	  mountpoint checks if the directory is a mountpoint.
 config BUSYBOX_NSENTER
 	bool "nsenter"
 	default y
@@ -640,6 +721,12 @@ config BUSYBOX_READPROFILE
 	#select PLATFORM_LINUX
 	help
 	  This allows you to parse /proc/profile for basic profiling.
+config BUSYBOX_RENICE
+	bool "renice"
+	default y
+	help
+	  Renice alters the scheduling priority of one or more running
+	  processes.
 config BUSYBOX_REV
 	bool "rev"
 	default y
@@ -685,6 +772,19 @@ config BUSYBOX_LINUX64
 	select BUSYBOX_PLATFORM_LINUX
 	help
 	  Alias to "setarch linux64".
+config BUSYBOX_SETPRIV
+	bool "setpriv"
+	default y
+	select BUSYBOX_PLATFORM_LINUX
+	select BUSYBOX_LONG_OPTS
+	help
+	  Run a program with different Linux privilege settings.
+	  Requires kernel >= 3.5
+config BUSYBOX_SETSID
+	bool "setsid"
+	default y
+	help
+	  setsid runs a program in a new session
 config BUSYBOX_SWAPON
 	bool "swapon"
 	default y
@@ -738,6 +838,21 @@ config BUSYBOX_SWITCH_ROOT
 	  * Because the Linux kernel uses rootfs internally as the starting
 	  and ending point for searching through the kernel's doubly linked
 	  list of active mount points. That's why.
+config BUSYBOX_TASKSET
+	bool "taskset"
+	default y
+	help
+	  Retrieve or set a processes's CPU affinity.
+	  This requires sched_{g,s}etaffinity support in your libc.
+
+config BUSYBOX_FEATURE_TASKSET_FANCY
+	bool "Fancy output"
+	default y
+	depends on BUSYBOX_TASKSET
+	help
+	  Needed for machines with more than 32-64 CPUs:
+	  affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+	  in this case. Otherwise, it is limited to sizeof(long).
 config BUSYBOX_UEVENT
 	bool "uevent"
 	default y
@@ -764,10 +879,17 @@ config BUSYBOX_FEATURE_UMOUNT_ALL
 config BUSYBOX_UNSHARE
 	bool "unshare"
 	default y
-	depends on BUSYBOX_LONG_OPTS && !BUSYBOX_NOMMU
+	depends on !BUSYBOX_NOMMU
 	select BUSYBOX_PLATFORM_LINUX
+	select BUSYBOX_LONG_OPTS
 	help
 	  Run program with some namespaces unshared from parent.
+config BUSYBOX_WALL
+	bool "wall"
+	default y
+	depends on BUSYBOX_FEATURE_UTMP
+	help
+	  Write a message to all users that are logged in.
 
 comment "Common options for mount/umount"
 	depends on BUSYBOX_MOUNT || BUSYBOX_UMOUNT
@@ -802,7 +924,7 @@ config BUSYBOX_FEATURE_MOUNT_LOOP_CREATE
 	  if it does not find a free one.
 
 config BUSYBOX_FEATURE_MTAB_SUPPORT
-	bool "Support for the old /etc/mtab file"
+	bool "Support old /etc/mtab file"
 	default n
 	depends on BUSYBOX_MOUNT || BUSYBOX_UMOUNT
 	select BUSYBOX_FEATURE_MOUNT_FAKE
diff --git a/config/busybox/util-linux/volume_id/Config.in b/config/busybox/util-linux/volume_id/Config.in
index 3db6b6099..c40f584da 100644
--- a/config/busybox/util-linux/volume_id/Config.in
+++ b/config/busybox/util-linux/volume_id/Config.in
@@ -11,31 +11,18 @@ config BUSYBOX_VOLUMEID
 menu "Filesystem/Volume identification"
 	depends on BUSYBOX_VOLUMEID
 
-
 config BUSYBOX_FEATURE_VOLUMEID_BCACHE
 	bool "bcache filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_BTRFS
 	bool "btrfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_CRAMFS
 	bool "cramfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_EXFAT
 	bool "exFAT filesystem"
 	default y
@@ -44,16 +31,10 @@ config BUSYBOX_FEATURE_VOLUMEID_EXFAT
 	  exFAT (extended FAT) is a proprietary file system designed especially
 	  for flash drives. It has many features from NTFS, but with less
 	  overhead. exFAT is used on most SDXC cards for consumer electronics.
-
-
 config BUSYBOX_FEATURE_VOLUMEID_EXT
 	bool "Ext filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_F2FS
 	bool "f2fs filesystem"
 	default y
@@ -63,64 +44,34 @@ config BUSYBOX_FEATURE_VOLUMEID_F2FS
 	  which is adapted to newer forms of storage. F2FS also remedies some
 	  known issues of the older log structured file systems, such as high
 	  cleaning overhead.
-
-
 config BUSYBOX_FEATURE_VOLUMEID_FAT
 	bool "fat filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_HFS
 	bool "hfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_ISO9660
 	bool "iso9660 filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_JFS
 	bool "jfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_LINUXRAID
 	bool "linuxraid"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_LINUXSWAP
 	bool "linux swap filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_LUKS
 	bool "luks filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_NILFS
 	bool "nilfs filesystem"
 	default y
@@ -136,40 +87,22 @@ config BUSYBOX_FEATURE_VOLUMEID_NILFS
 	  SOX compliance logging, and so forth. It can serve as an alternative
 	  filesystem for Linux desktop environment, or as a basis of advanced
 	  storage appliances.
-
-
 config BUSYBOX_FEATURE_VOLUMEID_NTFS
 	bool "ntfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_OCFS2
 	bool "ocfs2 filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_REISERFS
 	bool "Reiser filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_ROMFS
 	bool "romfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_SQUASHFS
 	bool "SquashFS filesystem"
 	default y
@@ -179,16 +112,10 @@ config BUSYBOX_FEATURE_VOLUMEID_SQUASHFS
 	  intended for general read-only filesystem use and in constrained block
 	  device/memory systems (e.g. embedded systems) where low overhead is
 	  needed.
-
-
 config BUSYBOX_FEATURE_VOLUMEID_SYSV
 	bool "sysv filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_UBIFS
 	bool "UBIFS filesystem"
 	default y
@@ -196,126 +123,65 @@ config BUSYBOX_FEATURE_VOLUMEID_UBIFS
 	help
 	  UBIFS (Unsorted Block Image File System) is a file
 	  system for use with raw flash memory media.
-
-
 config BUSYBOX_FEATURE_VOLUMEID_UDF
 	bool "udf filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
-
 ### config FEATURE_VOLUMEID_HIGHPOINTRAID
 ###	bool "highpoint raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_HPFS
 ###	bool "hpfs filesystem"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_ISWRAID
 ###	bool "intel raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_LSIRAID
 ###	bool "lsi raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_LVM
 ###	bool "lvm"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_MAC
 ###	bool "mac filesystem"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_MINIX
 ###	bool "minix filesystem"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_MSDOS
 ###	bool "msdos filesystem"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_NVIDIARAID
 ###	bool "nvidia raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_PROMISERAID
 ###	bool "promise raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_SILICONRAID
 ###	bool "silicon raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_UFS
 ###	bool "ufs filesystem"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 ### config FEATURE_VOLUMEID_VIARAID
 ###	bool "via raid"
 ###	default y
 ###	depends on VOLUMEID
-###	help
-###	  TODO
-
-
 config BUSYBOX_FEATURE_VOLUMEID_XFS
 	bool "xfs filesystem"
 	default y
 	depends on BUSYBOX_VOLUMEID
-	help
-	  TODO
-
 
 endmenu
diff --git a/patches/busybox-1.26.2/0200-reactivate-check-for-tty.patch b/patches/busybox-1.27.2/0200-reactivate-check-for-tty.patch
similarity index 100%
rename from patches/busybox-1.26.2/0200-reactivate-check-for-tty.patch
rename to patches/busybox-1.27.2/0200-reactivate-check-for-tty.patch
diff --git a/patches/busybox-1.26.2/0201-Fix-the-format-warning-when-building-applets-usage_p.patch b/patches/busybox-1.27.2/0201-Fix-the-format-warning-when-building-applets-usage_p.patch
similarity index 100%
rename from patches/busybox-1.26.2/0201-Fix-the-format-warning-when-building-applets-usage_p.patch
rename to patches/busybox-1.27.2/0201-Fix-the-format-warning-when-building-applets-usage_p.patch
diff --git a/patches/busybox-1.26.2/0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch b/patches/busybox-1.27.2/0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
similarity index 100%
rename from patches/busybox-1.26.2/0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
rename to patches/busybox-1.27.2/0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
diff --git a/patches/busybox-1.26.2/0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch b/patches/busybox-1.27.2/0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
similarity index 100%
rename from patches/busybox-1.26.2/0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
rename to patches/busybox-1.27.2/0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
diff --git a/patches/busybox-1.26.2/series b/patches/busybox-1.27.2/series
similarity index 86%
rename from patches/busybox-1.26.2/series
rename to patches/busybox-1.27.2/series
index bc29762d6..84c80aa6e 100644
--- a/patches/busybox-1.26.2/series
+++ b/patches/busybox-1.27.2/series
@@ -7,4 +7,4 @@
 0201-Fix-the-format-warning-when-building-applets-usage_p.patch
 0202-build-system-only-pass-real-libs-to-SELINUX_LIBS.patch
 0203-scripts-trylink-honour-SKIP_STRIP-and-don-t-strip-if.patch
-# 85c3e49d1a3d51e934d942443f99beba  - git-ptx-patches magic
+# 0036b420b1a49106a872780e90251289  - git-ptx-patches magic
diff --git a/rules/busybox.make b/rules/busybox.make
index 5c661fafd..13db84d11 100644
--- a/rules/busybox.make
+++ b/rules/busybox.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BUSYBOX) += busybox
 #
 # Paths and names
 #
-BUSYBOX_VERSION	:= 1.26.2
-BUSYBOX_MD5	:= bb59d25ee2643db20f212eec539429f1
+BUSYBOX_VERSION	:= 1.27.2
+BUSYBOX_MD5	:= 476186f4bab81781dab2369bfd42734e
 BUSYBOX		:= busybox-$(BUSYBOX_VERSION)
 BUSYBOX_SUFFIX	:= tar.bz2
 BUSYBOX_URL	:= https://www.busybox.net/downloads/$(BUSYBOX).$(BUSYBOX_SUFFIX)
-- 
2.14.1


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2017-09-06 12:42 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-01 16:39 [ptxdist] [PATCH 01/19] busybox: version bump 1.26.2 -> 1.27.2 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 02/19] dbus: version bump 1.10.18 -> 1.10.22 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 03/19] dbus: add upstream patch to avoid blocking at boot time Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 04/19] e2fsprogs: version bump 1.43.4 -> 1.43.6 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 05/19] host-imx-cst: version bump 2.3.1 -> 2.3.2 Clemens Gruber
2017-09-04  6:00   ` Denis OSTERLAND
2017-09-05  6:20     ` Michael Olbrich
2017-09-05  7:13       ` Marc Kleine-Budde
2017-09-05 14:59         ` Clemens Gruber
2017-09-06 12:42         ` Michael Olbrich
2017-09-01 16:39 ` [ptxdist] [PATCH 06/19] keyutils: version bump 1.5.9 -> 1.5.10 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 07/19] libcap-ng: version bump 0.7.7 -> 0.7.8 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 08/19] libgcrypt: version bump 1.7.8 -> 1.8.1 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 09/19] mosh: version bump 1.3.0 -> 1.3.2 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 10/19] mosh: make the crypto library configurable Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 11/19] mpg123: version bump 1.25.2 -> 1.25.6 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 12/19] procps: fix configure flags Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 13/19] postgresql: specify the used license Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 14/19] strace: version bump 4.16 -> 4.18 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 15/19] tcpdump: version bump 4.9.0 -> 4.9.1 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 16/19] trace-cmd: version bump 2.5.2 -> 2.6.1 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 17/19] u-boot-tools: version bump 2017.05.0 -> 2017.07.0 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 18/19] util-linux-ng: version bump 2.30 -> 2.30.1 Clemens Gruber
2017-09-01 16:39 ` [ptxdist] [PATCH 19/19] util-linux-ng: add fsfreeze Clemens Gruber
2017-09-02  5:14 ` [ptxdist] [PATCH 01/19] busybox: version bump 1.26.2 -> 1.27.2 Alexander Dahl
2017-09-02 10:51   ` Clemens Gruber
2017-09-02 19:06     ` Alexander Dahl
2017-09-05 15:11       ` Clemens Gruber

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox