* [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes
@ 2017-08-11 10:44 Roland Hieber
2017-08-11 12:38 ` Roland Hieber
2017-08-23 22:52 ` Roland Hieber
0 siblings, 2 replies; 4+ messages in thread
From: Roland Hieber @ 2017-08-11 10:44 UTC (permalink / raw)
To: ptxdist; +Cc: Roland Hieber
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
rules/qrencode.in | 31 +++++++++++++++++++++++++
rules/qrencode.make | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+)
create mode 100644 rules/qrencode.in
create mode 100644 rules/qrencode.make
diff --git a/rules/qrencode.in b/rules/qrencode.in
new file mode 100644
index 00000000..70308ba7
--- /dev/null
+++ b/rules/qrencode.in
@@ -0,0 +1,31 @@
+## SECTION=system_libraries
+
+menuconfig QRENCODE
+ tristate
+ prompt "qrencode "
+ select LIBPNG if QRENCODE_TOOLS
+ select LIBC_PTHREAD if QRENCODE_PTHREAD
+ help
+ Libqrencode is a C library for encoding data in a QR Code symbol, a
+ kind of 2D symbology that can be scanned by handy terminals such as a
+ mobile phone with CCD.
+
+if QRENCODE
+
+config QRENCODE_TOOLS
+ bool
+ default y
+ prompt "build tools"
+ help
+ Enable this option to build the qrencode tool to build QR codes from
+ the command line.
+
+config QRENCODE_PTHREAD
+ bool
+ default y
+ prompt "make library thread-safe"
+
+endif
+
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/qrencode.make b/rules/qrencode.make
new file mode 100644
index 00000000..bd4b5cd4
--- /dev/null
+++ b/rules/qrencode.make
@@ -0,0 +1,67 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_QRENCODE) += qrencode
+
+#
+# Paths and names
+#
+QRENCODE_VERSION := 3.4.4
+QRENCODE_MD5 := be545f3ce36ea8fbb58612d72c4222de
+QRENCODE := qrencode-$(QRENCODE_VERSION)
+QRENCODE_SUFFIX := tar.gz
+QRENCODE_URL := https://fukuchi.org/works/qrencode/$(QRENCODE).$(QRENCODE_SUFFIX)
+QRENCODE_SOURCE := $(SRCDIR)/$(QRENCODE).$(QRENCODE_SUFFIX)
+QRENCODE_DIR := $(BUILDDIR)/$(QRENCODE)
+QRENCODE_LICENSE := LGPL-2.1+
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+QRENCODE_CONF_TOOL := autoconf
+QRENCODE_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ --$(call ptx/endis,PTXCONF_QRENCODE_PTHREAD)-thread-safety \
+ --disable-sdltest \
+ --disable-rpath \
+ --disable-gprof \
+ --disable-gcov \
+ --disable-mudflap \
+ --$(call ptx/wwo,PTXCONF_QRENCODE_TOOLS)-tools \
+ --without-tests
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qrencode.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, qrencode)
+ @$(call install_fixup, qrencode,PRIORITY,optional)
+ @$(call install_fixup, qrencode,SECTION,base)
+ @$(call install_fixup, qrencode,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+ @$(call install_fixup, qrencode,DESCRIPTION,missing)
+
+ @$(call install_lib, qrencode, 0, 0, 0644, libqrencode)
+
+ifdef PTXCONF_QRENCODE_TOOLS
+ @$(call install_copy, qrencode, 0, 0, 0755, -, /usr/bin/qrencode)
+endif
+
+ @$(call install_finish, qrencode)
+
+ @$(call touch)
+
+# vim: ft=make ts=8 noet tw=80
--
2.11.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes
2017-08-11 10:44 [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes Roland Hieber
@ 2017-08-11 12:38 ` Roland Hieber
2017-08-23 9:46 ` Michael Olbrich
2017-08-23 22:52 ` Roland Hieber
1 sibling, 1 reply; 4+ messages in thread
From: Roland Hieber @ 2017-08-11 12:38 UTC (permalink / raw)
To: ptxdist
On 11.08.2017 12:44, Roland Hieber wrote:
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> rules/qrencode.in | 31 +++++++++++++++++++++++++
> rules/qrencode.make | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 98 insertions(+)
> create mode 100644 rules/qrencode.in
> create mode 100644 rules/qrencode.make
>
> diff --git a/rules/qrencode.in b/rules/qrencode.in
> new file mode 100644
> index 00000000..70308ba7
> --- /dev/null
> +++ b/rules/qrencode.in
> @@ -0,0 +1,31 @@
> +## SECTION=system_libraries
Hmmm, thinking about this, it could also fit into
SECTION=multimedia_libs or multimedia_tools. Thoughts?
- Roland
> +
> +menuconfig QRENCODE
> + tristate
> + prompt "qrencode "
> + select LIBPNG if QRENCODE_TOOLS
> + select LIBC_PTHREAD if QRENCODE_PTHREAD
> + help
> + Libqrencode is a C library for encoding data in a QR Code symbol, a
> + kind of 2D symbology that can be scanned by handy terminals such as a
> + mobile phone with CCD.
> +
> +if QRENCODE
> +
> +config QRENCODE_TOOLS
> + bool
> + default y
> + prompt "build tools"
> + help
> + Enable this option to build the qrencode tool to build QR codes from
> + the command line.
> +
> +config QRENCODE_PTHREAD
> + bool
> + default y
> + prompt "make library thread-safe"
> +
> +endif
> +
> +
> +# vim: ft=kconfig ts=8 noet tw=80
> diff --git a/rules/qrencode.make b/rules/qrencode.make
> new file mode 100644
> index 00000000..bd4b5cd4
> --- /dev/null
> +++ b/rules/qrencode.make
> @@ -0,0 +1,67 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_QRENCODE) += qrencode
> +
> +#
> +# Paths and names
> +#
> +QRENCODE_VERSION := 3.4.4
> +QRENCODE_MD5 := be545f3ce36ea8fbb58612d72c4222de
> +QRENCODE := qrencode-$(QRENCODE_VERSION)
> +QRENCODE_SUFFIX := tar.gz
> +QRENCODE_URL := https://fukuchi.org/works/qrencode/$(QRENCODE).$(QRENCODE_SUFFIX)
> +QRENCODE_SOURCE := $(SRCDIR)/$(QRENCODE).$(QRENCODE_SUFFIX)
> +QRENCODE_DIR := $(BUILDDIR)/$(QRENCODE)
> +QRENCODE_LICENSE := LGPL-2.1+
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +QRENCODE_CONF_TOOL := autoconf
> +QRENCODE_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR) \
> + --$(call ptx/endis,PTXCONF_QRENCODE_PTHREAD)-thread-safety \
> + --disable-sdltest \
> + --disable-rpath \
> + --disable-gprof \
> + --disable-gcov \
> + --disable-mudflap \
> + --$(call ptx/wwo,PTXCONF_QRENCODE_TOOLS)-tools \
> + --without-tests
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/qrencode.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, qrencode)
> + @$(call install_fixup, qrencode,PRIORITY,optional)
> + @$(call install_fixup, qrencode,SECTION,base)
> + @$(call install_fixup, qrencode,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
> + @$(call install_fixup, qrencode,DESCRIPTION,missing)
> +
> + @$(call install_lib, qrencode, 0, 0, 0644, libqrencode)
> +
> +ifdef PTXCONF_QRENCODE_TOOLS
> + @$(call install_copy, qrencode, 0, 0, 0755, -, /usr/bin/qrencode)
> +endif
> +
> + @$(call install_finish, qrencode)
> +
> + @$(call touch)
> +
> +# vim: ft=make ts=8 noet tw=80
>
--
Pengutronix e.K. | Roland Hieber |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes
2017-08-11 12:38 ` Roland Hieber
@ 2017-08-23 9:46 ` Michael Olbrich
0 siblings, 0 replies; 4+ messages in thread
From: Michael Olbrich @ 2017-08-23 9:46 UTC (permalink / raw)
To: ptxdist
On Fri, Aug 11, 2017 at 02:38:37PM +0200, Roland Hieber wrote:
>
>
> On 11.08.2017 12:44, Roland Hieber wrote:
> > Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> > ---
> > rules/qrencode.in | 31 +++++++++++++++++++++++++
> > rules/qrencode.make | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 98 insertions(+)
> > create mode 100644 rules/qrencode.in
> > create mode 100644 rules/qrencode.make
> >
> > diff --git a/rules/qrencode.in b/rules/qrencode.in
> > new file mode 100644
> > index 00000000..70308ba7
> > --- /dev/null
> > +++ b/rules/qrencode.in
> > @@ -0,0 +1,31 @@
> > +## SECTION=system_libraries
>
> Hmmm, thinking about this, it could also fit into SECTION=multimedia_libs or
> multimedia_tools. Thoughts?
use multimedia_tools.
> > +
> > +menuconfig QRENCODE
> > + tristate
> > + prompt "qrencode "
> > + select LIBPNG if QRENCODE_TOOLS
> > + select LIBC_PTHREAD if QRENCODE_PTHREAD
> > + help
> > + Libqrencode is a C library for encoding data in a QR Code symbol, a
> > + kind of 2D symbology that can be scanned by handy terminals such as a
> > + mobile phone with CCD.
> > +
> > +if QRENCODE
> > +
> > +config QRENCODE_TOOLS
> > + bool
> > + default y
> > + prompt "build tools"
> > + help
> > + Enable this option to build the qrencode tool to build QR codes from
> > + the command line.
> > +
> > +config QRENCODE_PTHREAD
> > + bool
> > + default y
> > + prompt "make library thread-safe"
Is there a reason to make this optional? I'd just enable it
unconditionally.
Michael
> > +
> > +endif
> > +
> > +
> > +# vim: ft=kconfig ts=8 noet tw=80
> > diff --git a/rules/qrencode.make b/rules/qrencode.make
> > new file mode 100644
> > index 00000000..bd4b5cd4
> > --- /dev/null
> > +++ b/rules/qrencode.make
> > @@ -0,0 +1,67 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_QRENCODE) += qrencode
> > +
> > +#
> > +# Paths and names
> > +#
> > +QRENCODE_VERSION := 3.4.4
> > +QRENCODE_MD5 := be545f3ce36ea8fbb58612d72c4222de
> > +QRENCODE := qrencode-$(QRENCODE_VERSION)
> > +QRENCODE_SUFFIX := tar.gz
> > +QRENCODE_URL := https://fukuchi.org/works/qrencode/$(QRENCODE).$(QRENCODE_SUFFIX)
> > +QRENCODE_SOURCE := $(SRCDIR)/$(QRENCODE).$(QRENCODE_SUFFIX)
> > +QRENCODE_DIR := $(BUILDDIR)/$(QRENCODE)
> > +QRENCODE_LICENSE := LGPL-2.1+
> > +
> > +# ----------------------------------------------------------------------------
> > +# Prepare
> > +# ----------------------------------------------------------------------------
> > +
> > +QRENCODE_CONF_TOOL := autoconf
> > +QRENCODE_CONF_OPT := \
> > + $(CROSS_AUTOCONF_USR) \
> > + --$(call ptx/endis,PTXCONF_QRENCODE_PTHREAD)-thread-safety \
> > + --disable-sdltest \
> > + --disable-rpath \
> > + --disable-gprof \
> > + --disable-gcov \
> > + --disable-mudflap \
> > + --$(call ptx/wwo,PTXCONF_QRENCODE_TOOLS)-tools \
> > + --without-tests
> > +
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/qrencode.targetinstall:
> > + @$(call targetinfo)
> > +
> > + @$(call install_init, qrencode)
> > + @$(call install_fixup, qrencode,PRIORITY,optional)
> > + @$(call install_fixup, qrencode,SECTION,base)
> > + @$(call install_fixup, qrencode,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
> > + @$(call install_fixup, qrencode,DESCRIPTION,missing)
> > +
> > + @$(call install_lib, qrencode, 0, 0, 0644, libqrencode)
> > +
> > +ifdef PTXCONF_QRENCODE_TOOLS
> > + @$(call install_copy, qrencode, 0, 0, 0755, -, /usr/bin/qrencode)
> > +endif
> > +
> > + @$(call install_finish, qrencode)
> > +
> > + @$(call touch)
> > +
> > +# vim: ft=make ts=8 noet tw=80
> >
>
> --
> Pengutronix e.K. | Roland Hieber |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes
2017-08-11 10:44 [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes Roland Hieber
2017-08-11 12:38 ` Roland Hieber
@ 2017-08-23 22:52 ` Roland Hieber
1 sibling, 0 replies; 4+ messages in thread
From: Roland Hieber @ 2017-08-23 22:52 UTC (permalink / raw)
To: ptxdist
Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
---
changes in v2:
- use SECTION=multimedia_tools
- always enable thread safety
---
rules/qrencode.in | 25 ++++++++++++++++++++
rules/qrencode.make | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+)
create mode 100644 rules/qrencode.in
create mode 100644 rules/qrencode.make
diff --git a/rules/qrencode.in b/rules/qrencode.in
new file mode 100644
index 000000000..e53f561b3
--- /dev/null
+++ b/rules/qrencode.in
@@ -0,0 +1,25 @@
+## SECTION=multimedia_tools
+
+menuconfig QRENCODE
+ tristate
+ prompt "qrencode "
+ select LIBPNG if QRENCODE_TOOLS
+ select LIBC_PTHREAD
+ help
+ Libqrencode is a C library for encoding data in a QR Code symbol, a
+ kind of 2D symbology that can be scanned by handy terminals such as a
+ mobile phone with CCD.
+
+if QRENCODE
+
+config QRENCODE_TOOLS
+ bool
+ default y
+ prompt "build tools"
+ help
+ Enable this option to build the qrencode tool to build QR codes from
+ the command line.
+
+endif
+
+# vim: ft=kconfig ts=8 noet tw=80
diff --git a/rules/qrencode.make b/rules/qrencode.make
new file mode 100644
index 000000000..d072e3622
--- /dev/null
+++ b/rules/qrencode.make
@@ -0,0 +1,67 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Roland Hieber <r.hieber@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_QRENCODE) += qrencode
+
+#
+# Paths and names
+#
+QRENCODE_VERSION := 3.4.4
+QRENCODE_MD5 := be545f3ce36ea8fbb58612d72c4222de
+QRENCODE := qrencode-$(QRENCODE_VERSION)
+QRENCODE_SUFFIX := tar.gz
+QRENCODE_URL := https://fukuchi.org/works/qrencode/$(QRENCODE).$(QRENCODE_SUFFIX)
+QRENCODE_SOURCE := $(SRCDIR)/$(QRENCODE).$(QRENCODE_SUFFIX)
+QRENCODE_DIR := $(BUILDDIR)/$(QRENCODE)
+QRENCODE_LICENSE := LGPL-2.1+
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+QRENCODE_CONF_TOOL := autoconf
+QRENCODE_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ --enable-thread-safety \
+ --disable-sdltest \
+ --disable-rpath \
+ --disable-gprof \
+ --disable-gcov \
+ --disable-mudflap \
+ --$(call ptx/wwo,PTXCONF_QRENCODE_TOOLS)-tools \
+ --without-tests
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/qrencode.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, qrencode)
+ @$(call install_fixup, qrencode,PRIORITY,optional)
+ @$(call install_fixup, qrencode,SECTION,base)
+ @$(call install_fixup, qrencode,AUTHOR,"Roland Hieber <r.hieber@pengutronix.de>")
+ @$(call install_fixup, qrencode,DESCRIPTION,missing)
+
+ @$(call install_lib, qrencode, 0, 0, 0644, libqrencode)
+
+ifdef PTXCONF_QRENCODE_TOOLS
+ @$(call install_copy, qrencode, 0, 0, 0755, -, /usr/bin/qrencode)
+endif
+
+ @$(call install_finish, qrencode)
+
+ @$(call touch)
+
+# vim: ft=make ts=8 noet tw=80
--
2.11.0
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-08-23 22:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-11 10:44 [ptxdist] [PATCH] qrencode: new package: library and tools for encoding QR codes Roland Hieber
2017-08-11 12:38 ` Roland Hieber
2017-08-23 9:46 ` Michael Olbrich
2017-08-23 22:52 ` Roland Hieber
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox