From: Clemens Gruber <clemens.gruber@pqgruber.com>
To: ptxdist@pengutronix.de
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Subject: [ptxdist] [PATCH 7/8] rsyslog: misc improvements and fixes
Date: Tue, 28 Mar 2017 23:47:22 +0200 [thread overview]
Message-ID: <20170328214723.2517-7-clemens.gruber@pqgruber.com> (raw)
In-Reply-To: <20170328214723.2517-1-clemens.gruber@pqgruber.com>
json-c is no longer needed, rsyslog uses libfastjson from now on.
Make imkmsg, mmjsonparse and pmciscoios configurable.
Use --disable-unlimited-select as most other distros do and add missing
configure options.
Replace legacy configuration directives and do not load immark by
default.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
projectroot/etc/rsyslog.conf | 6 +++---
rules/rsyslog.in | 21 +++++++++++++++++----
rules/rsyslog.make | 12 ++++++++----
3 files changed, 28 insertions(+), 11 deletions(-)
diff --git a/projectroot/etc/rsyslog.conf b/projectroot/etc/rsyslog.conf
index 94115e46d..a8c6945d4 100644
--- a/projectroot/etc/rsyslog.conf
+++ b/projectroot/etc/rsyslog.conf
@@ -1,8 +1,8 @@
# Begin /etc/rsyslog.conf
-$ModLoad immark # provides --MARK-- message capability
-$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
-$ModLoad imklog # provides kernel logging support (previously done by rklogd)
+module(load="imuxsock") # provides support for local system logging (e.g. via logger command)
+module(load="imklog") # provides kernel logging support (previously done by rklogd)
+#module(load"immark") # provides --MARK-- message capability
daemon.* -/var/log/daemon.log
kern.* -/var/log/kern.log
diff --git a/rules/rsyslog.in b/rules/rsyslog.in
index 64f1063ea..f99c271eb 100644
--- a/rules/rsyslog.in
+++ b/rules/rsyslog.in
@@ -8,13 +8,13 @@ menuconfig RSYSLOG
select GCCLIBS_GCC_S
select ZLIB
select LIBESTR
- select JSON_C
select LIBFASTJSON
select LIBNET if RSYSLOG_OMUDPSPOOF
select SYSTEMD if RSYSLOG_SYSTEMD
prompt "rsyslog "
help
- FIXME
+ rsyslog is a reliable system and kernel logging daemon with
+ modular design and high speed message processing.
if RSYSLOG
@@ -30,13 +30,13 @@ config RSYSLOG_SYSTEMD_UNIT
config RSYSLOG_REGEXP
bool
- # 8.8.0 fail to build without regex support
+ # 8.25.0 fails to build without regex support
default y
prompt "regular expression support" if BROKEN
config RSYSLOG_INET
bool
- # 8.8.0 fail to run without inet support
+ # 8.25.0 fails to run without inet support
default y
prompt "networking support" if BROKEN
@@ -53,6 +53,11 @@ config RSYSLOG_IMKLOG
default y
prompt "klog input module"
+config RSYSLOG_IMKMSG
+ bool
+ default n
+ prompt "kmsg input module (contrib)"
+
config RSYSLOG_IMMARK
bool
default y
@@ -81,6 +86,10 @@ config RSYSLOG_IMUXSOCK
default y
prompt "unix domain socket input module"
+config RSYSLOG_MMJSONPARSE
+ bool
+ prompt "jsonparse message modification module"
+
config RSYSLOG_OMPROG
bool
prompt "program output module"
@@ -97,6 +106,10 @@ config RSYSLOG_OMUXSOCK
bool
prompt "unix domain socket output module"
+config RSYSLOG_PMCISCOIOS
+ bool
+ prompt "cisco ios parser module"
+
config RSYSLOG_PMLASTMSG
bool
prompt "lastmsg parser module"
diff --git a/rules/rsyslog.make b/rules/rsyslog.make
index c22875dd3..f33046041 100644
--- a/rules/rsyslog.make
+++ b/rules/rsyslog.make
@@ -43,11 +43,11 @@ RSYSLOG_CONF_OPT := \
--$(call ptx/endis, PTXCONF_RSYSLOG_REGEXP)-regexp \
--disable-gssapi-krb5 \
--$(call ptx/endis, PTXCONF_RSYSLOG_IMKLOG)-klog \
- --enable-kmsg \
+ --$(call ptx/endis, PTXCONF_RSYSLOG_IMKMSG)-kmsg \
--$(call ptx/endis, PTXCONF_RSYSLOG_SYSTEMD)-imjournal \
--$(call ptx/endis, PTXCONF_RSYSLOG_INET)-inet \
--disable-jemalloc \
- --enable-unlimited-select \
+ --disable-unlimited-select \
--disable-debug \
--disable-debug-symbols \
--disable-rtinst \
@@ -62,6 +62,7 @@ RSYSLOG_CONF_OPT := \
--disable-snmp \
--disable-uuid \
--disable-elasticsearch \
+ --disable-elasticsearch-tests \
--disable-gnutls \
--disable-libgcrypt \
--enable-rsyslogrt \
@@ -72,7 +73,7 @@ RSYSLOG_CONF_OPT := \
--disable-mail \
--$(call ptx/endis, PTXCONF_RSYSLOG_IMDIAG)-imdiag \
--disable-mmnormalize \
- --disable-mmjsonparse \
+ --$(call ptx/endis, PTXCONF_RSYSLOG_MMJSONPARSE)-mmjsonparse \
--disable-mmgrok \
--disable-mmaudit \
--disable-mmanon \
@@ -100,7 +101,7 @@ RSYSLOG_CONF_OPT := \
--$(call ptx/endis, PTXCONF_RSYSLOG_SYSTEMD)-omjournal \
--$(call ptx/endis, PTXCONF_RSYSLOG_PMLASTMSG)-pmlastmsg \
--disable-pmcisconames \
- --disable-pmciscoios \
+ --$(call ptx/endis, PTXCONF_RSYSLOG_PMCISCOIOS)-pmciscoios \
--disable-pmnull \
--disable-pmaixforwardedfrom \
--disable-pmsnare \
@@ -133,6 +134,7 @@ endif
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMDIAG) += imdiag
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMFILE) += imfile
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMKLOG) += imklog
+RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMKMSG) += imkmsg
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_SYSTEMD) += imjournal
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMMARK) += immark
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_IMPSTATS) += impstats
@@ -148,11 +150,13 @@ RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_INET) += lmstrmsrv
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_INET) += lmtcpclt
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_INET) += lmtcpsrv
RSYSLOG_PLUGINS-y += lmzlibw
+RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_MMJSONPARSE) += mmjsonparse
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_OMPROG) += omprog
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_OMSTDOUT) += omstdout
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_SYSTEMD) += omjournal
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_OMUDPSPOOF) += omudpspoof
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_OMUXSOCK) += omuxsock
+RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_PMCISCOIOS) += pmciscoios
RSYSLOG_PLUGINS-$(PTXCONF_RSYSLOG_PMLASTMSG) += pmlastmsg
# ----------------------------------------------------------------------------
--
2.12.1
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2017-03-28 21:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 21:47 [ptxdist] [PATCH 1/8] file: version bump 5.29 -> 5.30 Clemens Gruber
2017-03-28 21:47 ` [ptxdist] [PATCH 2/8] flex: update 2.5.39 -> 2.6.3 Clemens Gruber
2017-03-29 9:49 ` Michael Olbrich
2017-03-28 21:47 ` [ptxdist] [PATCH 3/8] iproute2: version bump 4.9.0 -> 4.10.0 Clemens Gruber
2017-03-29 10:02 ` Michael Olbrich
2017-03-28 21:47 ` [ptxdist] [PATCH 4/8] libgpg-error: version bump 1.24 -> 1.26 Clemens Gruber
2017-04-03 8:28 ` Michael Olbrich
2017-03-28 21:47 ` [ptxdist] [PATCH 5/8] mosh: version bump 1.2.6 -> 1.3.0 Clemens Gruber
2017-04-03 8:28 ` Michael Olbrich
2017-03-28 21:47 ` [ptxdist] [PATCH 6/8] openssh: update 7.3p1 -> 7.5p1 Clemens Gruber
2017-03-28 21:47 ` Clemens Gruber [this message]
2017-04-03 8:28 ` [ptxdist] [PATCH 7/8] rsyslog: misc improvements and fixes Michael Olbrich
2017-03-28 21:47 ` [ptxdist] [PATCH 8/8] util-linux-ng: version bump 2.29 -> 2.29.2 Clemens Gruber
2017-04-03 8:28 ` Michael Olbrich
2017-04-03 8:28 ` [ptxdist] [PATCH 1/8] file: version bump 5.29 -> 5.30 Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170328214723.2517-7-clemens.gruber@pqgruber.com \
--to=clemens.gruber@pqgruber.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox