* [ptxdist] [PATCH 1/2] nettle: update to version 3.3 @ 2016-12-15 13:50 Clemens Gruber 2016-12-15 13:50 ` [ptxdist] [PATCH 2/2] iputils: update to version s20161105 Clemens Gruber 2016-12-16 15:00 ` [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Michael Olbrich 0 siblings, 2 replies; 6+ messages in thread From: Clemens Gruber @ 2016-12-15 13:50 UTC (permalink / raw) To: ptxdist; +Cc: Clemens Gruber Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> --- rules/nettle.in | 1 - rules/nettle.make | 5 +++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/rules/nettle.in b/rules/nettle.in index 9ec8429..fcacb96 100644 --- a/rules/nettle.in +++ b/rules/nettle.in @@ -2,7 +2,6 @@ config NETTLE tristate - select LIBGMP prompt "nettle" help Nettle is a cryptographic library. diff --git a/rules/nettle.make b/rules/nettle.make index dae19bd..5bc3088 100644 --- a/rules/nettle.make +++ b/rules/nettle.make @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_NETTLE) += nettle # # Paths and names # -NETTLE_VERSION := 2.7.1 -NETTLE_MD5 := 003d5147911317931dd453520eb234a5 +NETTLE_VERSION := 3.3 +NETTLE_MD5 := 10f969f78a463704ae73529978148dbe NETTLE := nettle-$(NETTLE_VERSION) NETTLE_SUFFIX := tar.gz NETTLE_URL := http://www.lysator.liu.se/~nisse/archive/$(NETTLE).$(NETTLE_SUFFIX) @@ -39,6 +39,7 @@ NETTLE_CONF_OPT := \ --enable-static \ --enable-public-key \ --enable-assembler \ + --enable-mini-gmp \ --disable-openssl \ --disable-gcov \ --disable-documentation \ -- 2.10.2 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
* [ptxdist] [PATCH 2/2] iputils: update to version s20161105 2016-12-15 13:50 [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Clemens Gruber @ 2016-12-15 13:50 ` Clemens Gruber 2016-12-16 14:35 ` Michael Olbrich 2016-12-16 15:00 ` [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Michael Olbrich 1 sibling, 1 reply; 6+ messages in thread From: Clemens Gruber @ 2016-12-15 13:50 UTC (permalink / raw) To: ptxdist; +Cc: Clemens Gruber The current version of iputils ping can handle IPv4 and IPv6 and does not need the big GnuTLS/libgcrypt/.. dependency. tracepath can also handle both v4 and v6. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> --- rules/iputils.in | 41 +++++++++++------------------------------ rules/iputils.make | 12 +++++------- 2 files changed, 16 insertions(+), 37 deletions(-) diff --git a/rules/iputils.in b/rules/iputils.in index 99105f7..4a842a6 100644 --- a/rules/iputils.in +++ b/rules/iputils.in @@ -3,10 +3,9 @@ menuconfig IPUTILS tristate prompt "iputils " - select LIBC_RESOLV if IPUTILS_PING6 - select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_PING6 || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF - select GNUTLS if IPUTILS_PING6 - select GNUTLS_OPENSSL if IPUTILS_PING6 + select LIBC_RESOLV if IPUTILS_PING + select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF + select NETTLE if IPUTILS_PING help The iputils package is set of small useful utilities for Linux networking. @@ -35,12 +34,12 @@ config IPUTILS_PING bool depends on (!BUSYBOX_PING && !INETUTILS_PING) || ALLYES prompt "ping" + depends on GLOBAL_IPV6 help - The ping command uses the ICMP protocol's mandatory ECHO_REQUEST datagram - to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST - datagrams pings have an IP and ICMP header, followed by a struct - timeval and then an arbitrary number of pad bytes used to fill out - the packet. + ping uses the ICMP protocols mandatory ECHO_REQUEST datagram to elicit + an ICMP ECHO_RESPONSE from a host or gateway. + It works with both IPv4 and IPv6. Using only one of them explicitly can + be enforced by specifying -4 or -6. comment "inetutils' ping is selected!" depends on INETUTILS_PING @@ -48,22 +47,6 @@ comment "inetutils' ping is selected!" comment "BusyBox' ping is selected!" depends on BUSYBOX_PING -config IPUTILS_PING6 - bool - depends on (!BUSYBOX_PING6 && !INETUTILS_PING6) || ALLYES - prompt "ping6" - depends on GLOBAL_IPV6 - help - The ping6 command is IPv6 version of ping, and can also send Node - Information Queries (RFC4620). Intermediate hops may not be allowed, - because IPv6 source routing was deprecated (RFC5095). - -comment "inetutils' ping6 is selected!" - depends on INETUTILS_PING6 - -comment "BusyBox' ping6 is selected!" - depends on BUSYBOX_PING6 - config IPUTILS_RARPD bool prompt "rarpd" @@ -97,13 +80,10 @@ comment "BusyBox' tftpd is selected!" config IPUTILS_TRACEPATH bool prompt "tracepath" - help - -config IPUTILS_TRACEPATH6 - bool - prompt "tracepath6" depends on GLOBAL_IPV6 help + tracepath traces the path to a network host discovering the MTU along + this path. config IPUTILS_TRACEROUTE6 bool @@ -111,6 +91,7 @@ config IPUTILS_TRACEROUTE6 prompt "traceroute6" depends on GLOBAL_IPV6 help + traceroute6 prints the route packets trace to network hosts. comment "BusyBox' traceroute6 is selected!" depends on BUSYBOX_TRACEROUTE6 diff --git a/rules/iputils.make b/rules/iputils.make index dc93d5c..f07e325 100644 --- a/rules/iputils.make +++ b/rules/iputils.make @@ -16,11 +16,11 @@ PACKAGES-$(PTXCONF_IPUTILS) += iputils # # Paths and names # -IPUTILS_VERSION := s20121221 -IPUTILS_MD5 := 6072aef64205720dd1893b375e184171 +IPUTILS_VERSION := s20161105 +IPUTILS_MD5 := 06f0be2dabe10dc80fdb328073230e69 IPUTILS := iputils-$(IPUTILS_VERSION) -IPUTILS_SUFFIX := tar.bz2 -IPUTILS_URL := http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX) +IPUTILS_SUFFIX := tar.gz +IPUTILS_URL := http://codeload.github.com/iputils/iputils/$(IPUTILS_SUFFIX)/$(IPUTILS_VERSION) IPUTILS_SOURCE := $(SRCDIR)/$(IPUTILS).$(IPUTILS_SUFFIX) IPUTILS_DIR := $(BUILDDIR)/$(IPUTILS) IPUTILS_LICENSE := GPL-2.0 @@ -34,16 +34,14 @@ IPUTILS_TOOLS-y := IPUTILS_TOOLS-$(PTXCONF_IPUTILS_ARPING) += arping IPUTILS_TOOLS-$(PTXCONF_IPUTILS_CLOCKDIFF) += clockdiff IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING) += ping -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING6) += ping6 IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RARPD) += rarpd IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RDISC) += rdisc IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TFTPD) += tftpd IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH) += tracepath -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH6) += tracepath6 IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEROUTE6) += traceroute6 IPUTILS_CONF_TOOL := NO -IPUTILS_MAKEVARS := $(CROSS_ENV) TARGETS="$(IPUTILS_TOOLS-y)" +IPUTILS_MAKEVARS := $(CROSS_ENV) USE_IDN=no TARGETS="$(IPUTILS_TOOLS-y)" # ---------------------------------------------------------------------------- # Install -- 2.10.2 _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [PATCH 2/2] iputils: update to version s20161105 2016-12-15 13:50 ` [ptxdist] [PATCH 2/2] iputils: update to version s20161105 Clemens Gruber @ 2016-12-16 14:35 ` Michael Olbrich 2016-12-16 14:43 ` Clemens Gruber 0 siblings, 1 reply; 6+ messages in thread From: Michael Olbrich @ 2016-12-16 14:35 UTC (permalink / raw) To: ptxdist On Thu, Dec 15, 2016 at 02:50:38PM +0100, Clemens Gruber wrote: > The current version of iputils ping can handle IPv4 and IPv6 and does > not need the big GnuTLS/libgcrypt/.. dependency. > tracepath can also handle both v4 and v6. > > Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> > --- > rules/iputils.in | 41 +++++++++++------------------------------ > rules/iputils.make | 12 +++++------- > 2 files changed, 16 insertions(+), 37 deletions(-) > > diff --git a/rules/iputils.in b/rules/iputils.in > index 99105f7..4a842a6 100644 > --- a/rules/iputils.in > +++ b/rules/iputils.in > @@ -3,10 +3,9 @@ > menuconfig IPUTILS > tristate > prompt "iputils " > - select LIBC_RESOLV if IPUTILS_PING6 > - select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_PING6 || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF > - select GNUTLS if IPUTILS_PING6 > - select GNUTLS_OPENSSL if IPUTILS_PING6 > + select LIBC_RESOLV if IPUTILS_PING > + select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF > + select NETTLE if IPUTILS_PING > help > The iputils package is set of small useful utilities for Linux > networking. > @@ -35,12 +34,12 @@ config IPUTILS_PING > bool > depends on (!BUSYBOX_PING && !INETUTILS_PING) || ALLYES > prompt "ping" > + depends on GLOBAL_IPV6 > help > - The ping command uses the ICMP protocol's mandatory ECHO_REQUEST datagram > - to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST > - datagrams pings have an IP and ICMP header, followed by a struct > - timeval and then an arbitrary number of pad bytes used to fill out > - the packet. > + ping uses the ICMP protocols mandatory ECHO_REQUEST datagram to elicit > + an ICMP ECHO_RESPONSE from a host or gateway. > + It works with both IPv4 and IPv6. Using only one of them explicitly can > + be enforced by specifying -4 or -6. > > comment "inetutils' ping is selected!" > depends on INETUTILS_PING > @@ -48,22 +47,6 @@ comment "inetutils' ping is selected!" > comment "BusyBox' ping is selected!" > depends on BUSYBOX_PING > > -config IPUTILS_PING6 > - bool > - depends on (!BUSYBOX_PING6 && !INETUTILS_PING6) || ALLYES > - prompt "ping6" > - depends on GLOBAL_IPV6 > - help > - The ping6 command is IPv6 version of ping, and can also send Node > - Information Queries (RFC4620). Intermediate hops may not be allowed, > - because IPv6 source routing was deprecated (RFC5095). > - > -comment "inetutils' ping6 is selected!" > - depends on INETUTILS_PING6 > - > -comment "BusyBox' ping6 is selected!" > - depends on BUSYBOX_PING6 > - > config IPUTILS_RARPD > bool > prompt "rarpd" > @@ -97,13 +80,10 @@ comment "BusyBox' tftpd is selected!" > config IPUTILS_TRACEPATH > bool > prompt "tracepath" > - help > - > -config IPUTILS_TRACEPATH6 > - bool > - prompt "tracepath6" > depends on GLOBAL_IPV6 > help > + tracepath traces the path to a network host discovering the MTU along > + this path. > > config IPUTILS_TRACEROUTE6 > bool > @@ -111,6 +91,7 @@ config IPUTILS_TRACEROUTE6 > prompt "traceroute6" > depends on GLOBAL_IPV6 > help > + traceroute6 prints the route packets trace to network hosts. > > comment "BusyBox' traceroute6 is selected!" > depends on BUSYBOX_TRACEROUTE6 > diff --git a/rules/iputils.make b/rules/iputils.make > index dc93d5c..f07e325 100644 > --- a/rules/iputils.make > +++ b/rules/iputils.make > @@ -16,11 +16,11 @@ PACKAGES-$(PTXCONF_IPUTILS) += iputils > # > # Paths and names > # > -IPUTILS_VERSION := s20121221 > -IPUTILS_MD5 := 6072aef64205720dd1893b375e184171 > +IPUTILS_VERSION := s20161105 > +IPUTILS_MD5 := 06f0be2dabe10dc80fdb328073230e69 > IPUTILS := iputils-$(IPUTILS_VERSION) > -IPUTILS_SUFFIX := tar.bz2 > -IPUTILS_URL := http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX) > +IPUTILS_SUFFIX := tar.gz > +IPUTILS_URL := http://codeload.github.com/iputils/iputils/$(IPUTILS_SUFFIX)/$(IPUTILS_VERSION) This URL is broken. Michael > IPUTILS_SOURCE := $(SRCDIR)/$(IPUTILS).$(IPUTILS_SUFFIX) > IPUTILS_DIR := $(BUILDDIR)/$(IPUTILS) > IPUTILS_LICENSE := GPL-2.0 > @@ -34,16 +34,14 @@ IPUTILS_TOOLS-y := > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_ARPING) += arping > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_CLOCKDIFF) += clockdiff > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING) += ping > -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING6) += ping6 > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RARPD) += rarpd > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RDISC) += rdisc > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TFTPD) += tftpd > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH) += tracepath > -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH6) += tracepath6 > IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEROUTE6) += traceroute6 > > IPUTILS_CONF_TOOL := NO > -IPUTILS_MAKEVARS := $(CROSS_ENV) TARGETS="$(IPUTILS_TOOLS-y)" > +IPUTILS_MAKEVARS := $(CROSS_ENV) USE_IDN=no TARGETS="$(IPUTILS_TOOLS-y)" > > # ---------------------------------------------------------------------------- > # Install > -- > 2.10.2 > > > _______________________________________________ > ptxdist mailing list > ptxdist@pengutronix.de -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [PATCH 2/2] iputils: update to version s20161105 2016-12-16 14:35 ` Michael Olbrich @ 2016-12-16 14:43 ` Clemens Gruber 2016-12-16 14:50 ` Michael Olbrich 0 siblings, 1 reply; 6+ messages in thread From: Clemens Gruber @ 2016-12-16 14:43 UTC (permalink / raw) To: ptxdist On Fri, Dec 16, 2016 at 03:35:30PM +0100, Michael Olbrich wrote: > On Thu, Dec 15, 2016 at 02:50:38PM +0100, Clemens Gruber wrote: > > IPUTILS := iputils-$(IPUTILS_VERSION) > > -IPUTILS_SUFFIX := tar.bz2 > > -IPUTILS_URL := http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX) > > +IPUTILS_SUFFIX := tar.gz > > +IPUTILS_URL := http://codeload.github.com/iputils/iputils/$(IPUTILS_SUFFIX)/$(IPUTILS_VERSION) > > This URL is broken. Hi, do you mean, because there is no suffix at the end or because the download fails? I just redownloaded it from that URL via ptxdist get. (works!) But I can replace it with the https://github.com/iputils/iputils/archive/s20161105.tar.gz instead of the codeload.github.com URL if that is preferred. If so, I should probably also replace the URL in libfastjson.make? Thanks, Clemens _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [PATCH 2/2] iputils: update to version s20161105 2016-12-16 14:43 ` Clemens Gruber @ 2016-12-16 14:50 ` Michael Olbrich 0 siblings, 0 replies; 6+ messages in thread From: Michael Olbrich @ 2016-12-16 14:50 UTC (permalink / raw) To: ptxdist On Fri, Dec 16, 2016 at 03:43:16PM +0100, Clemens Gruber wrote: > On Fri, Dec 16, 2016 at 03:35:30PM +0100, Michael Olbrich wrote: > > On Thu, Dec 15, 2016 at 02:50:38PM +0100, Clemens Gruber wrote: > > > IPUTILS := iputils-$(IPUTILS_VERSION) > > > -IPUTILS_SUFFIX := tar.bz2 > > > -IPUTILS_URL := http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX) > > > +IPUTILS_SUFFIX := tar.gz > > > +IPUTILS_URL := http://codeload.github.com/iputils/iputils/$(IPUTILS_SUFFIX)/$(IPUTILS_VERSION) > > > > This URL is broken. > > Hi, > > do you mean, because there is no suffix at the end or because the > download fails? > I just redownloaded it from that URL via ptxdist get. (works!) > > But I can replace it with the > https://github.com/iputils/iputils/archive/s20161105.tar.gz > instead of the codeload.github.com URL if that is preferred. Hmm, strange, I got timeouts before, but now it works. So no need to change anything. > If so, I should probably also replace the URL in libfastjson.make? Michael -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ptxdist] [PATCH 1/2] nettle: update to version 3.3 2016-12-15 13:50 [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Clemens Gruber 2016-12-15 13:50 ` [ptxdist] [PATCH 2/2] iputils: update to version s20161105 Clemens Gruber @ 2016-12-16 15:00 ` Michael Olbrich 1 sibling, 0 replies; 6+ messages in thread From: Michael Olbrich @ 2016-12-16 15:00 UTC (permalink / raw) To: ptxdist On Thu, Dec 15, 2016 at 02:50:37PM +0100, Clemens Gruber wrote: > Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> > --- > rules/nettle.in | 1 - > rules/nettle.make | 5 +++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/rules/nettle.in b/rules/nettle.in > index 9ec8429..fcacb96 100644 > --- a/rules/nettle.in > +++ b/rules/nettle.in > @@ -2,7 +2,6 @@ > > config NETTLE > tristate > - select LIBGMP > prompt "nettle" > help > Nettle is a cryptographic library. > diff --git a/rules/nettle.make b/rules/nettle.make > index dae19bd..5bc3088 100644 > --- a/rules/nettle.make > +++ b/rules/nettle.make > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_NETTLE) += nettle > # > # Paths and names > # > -NETTLE_VERSION := 2.7.1 > -NETTLE_MD5 := 003d5147911317931dd453520eb234a5 > +NETTLE_VERSION := 3.3 > +NETTLE_MD5 := 10f969f78a463704ae73529978148dbe > NETTLE := nettle-$(NETTLE_VERSION) > NETTLE_SUFFIX := tar.gz > NETTLE_URL := http://www.lysator.liu.se/~nisse/archive/$(NETTLE).$(NETTLE_SUFFIX) > @@ -39,6 +39,7 @@ NETTLE_CONF_OPT := \ > --enable-static \ > --enable-public-key \ > --enable-assembler \ > + --enable-mini-gmp \ Please keep this in the order of the --help output. And add the fat/aes options (disabled for now). Michael > --disable-openssl \ > --disable-gcov \ > --disable-documentation \ > -- > 2.10.2 > > > _______________________________________________ > ptxdist mailing list > ptxdist@pengutronix.de -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-12-16 15:00 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-12-15 13:50 [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Clemens Gruber 2016-12-15 13:50 ` [ptxdist] [PATCH 2/2] iputils: update to version s20161105 Clemens Gruber 2016-12-16 14:35 ` Michael Olbrich 2016-12-16 14:43 ` Clemens Gruber 2016-12-16 14:50 ` Michael Olbrich 2016-12-16 15:00 ` [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Michael Olbrich
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox