From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 2/2] iputils: update to version s20161105
Date: Fri, 16 Dec 2016 15:35:30 +0100 [thread overview]
Message-ID: <20161216143530.cnmyluws2gonrx64@pengutronix.de> (raw)
In-Reply-To: <20161215135038.16524-2-clemens.gruber@pqgruber.com>
On Thu, Dec 15, 2016 at 02:50:38PM +0100, Clemens Gruber wrote:
> The current version of iputils ping can handle IPv4 and IPv6 and does
> not need the big GnuTLS/libgcrypt/.. dependency.
> tracepath can also handle both v4 and v6.
>
> Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
> ---
> rules/iputils.in | 41 +++++++++++------------------------------
> rules/iputils.make | 12 +++++-------
> 2 files changed, 16 insertions(+), 37 deletions(-)
>
> diff --git a/rules/iputils.in b/rules/iputils.in
> index 99105f7..4a842a6 100644
> --- a/rules/iputils.in
> +++ b/rules/iputils.in
> @@ -3,10 +3,9 @@
> menuconfig IPUTILS
> tristate
> prompt "iputils "
> - select LIBC_RESOLV if IPUTILS_PING6
> - select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_PING6 || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF
> - select GNUTLS if IPUTILS_PING6
> - select GNUTLS_OPENSSL if IPUTILS_PING6
> + select LIBC_RESOLV if IPUTILS_PING
> + select LIBCAP if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_TRACEROUTE6 || IPUTILS_CLOCKDIFF
> + select NETTLE if IPUTILS_PING
> help
> The iputils package is set of small useful utilities for Linux
> networking.
> @@ -35,12 +34,12 @@ config IPUTILS_PING
> bool
> depends on (!BUSYBOX_PING && !INETUTILS_PING) || ALLYES
> prompt "ping"
> + depends on GLOBAL_IPV6
> help
> - The ping command uses the ICMP protocol's mandatory ECHO_REQUEST datagram
> - to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST
> - datagrams pings have an IP and ICMP header, followed by a struct
> - timeval and then an arbitrary number of pad bytes used to fill out
> - the packet.
> + ping uses the ICMP protocols mandatory ECHO_REQUEST datagram to elicit
> + an ICMP ECHO_RESPONSE from a host or gateway.
> + It works with both IPv4 and IPv6. Using only one of them explicitly can
> + be enforced by specifying -4 or -6.
>
> comment "inetutils' ping is selected!"
> depends on INETUTILS_PING
> @@ -48,22 +47,6 @@ comment "inetutils' ping is selected!"
> comment "BusyBox' ping is selected!"
> depends on BUSYBOX_PING
>
> -config IPUTILS_PING6
> - bool
> - depends on (!BUSYBOX_PING6 && !INETUTILS_PING6) || ALLYES
> - prompt "ping6"
> - depends on GLOBAL_IPV6
> - help
> - The ping6 command is IPv6 version of ping, and can also send Node
> - Information Queries (RFC4620). Intermediate hops may not be allowed,
> - because IPv6 source routing was deprecated (RFC5095).
> -
> -comment "inetutils' ping6 is selected!"
> - depends on INETUTILS_PING6
> -
> -comment "BusyBox' ping6 is selected!"
> - depends on BUSYBOX_PING6
> -
> config IPUTILS_RARPD
> bool
> prompt "rarpd"
> @@ -97,13 +80,10 @@ comment "BusyBox' tftpd is selected!"
> config IPUTILS_TRACEPATH
> bool
> prompt "tracepath"
> - help
> -
> -config IPUTILS_TRACEPATH6
> - bool
> - prompt "tracepath6"
> depends on GLOBAL_IPV6
> help
> + tracepath traces the path to a network host discovering the MTU along
> + this path.
>
> config IPUTILS_TRACEROUTE6
> bool
> @@ -111,6 +91,7 @@ config IPUTILS_TRACEROUTE6
> prompt "traceroute6"
> depends on GLOBAL_IPV6
> help
> + traceroute6 prints the route packets trace to network hosts.
>
> comment "BusyBox' traceroute6 is selected!"
> depends on BUSYBOX_TRACEROUTE6
> diff --git a/rules/iputils.make b/rules/iputils.make
> index dc93d5c..f07e325 100644
> --- a/rules/iputils.make
> +++ b/rules/iputils.make
> @@ -16,11 +16,11 @@ PACKAGES-$(PTXCONF_IPUTILS) += iputils
> #
> # Paths and names
> #
> -IPUTILS_VERSION := s20121221
> -IPUTILS_MD5 := 6072aef64205720dd1893b375e184171
> +IPUTILS_VERSION := s20161105
> +IPUTILS_MD5 := 06f0be2dabe10dc80fdb328073230e69
> IPUTILS := iputils-$(IPUTILS_VERSION)
> -IPUTILS_SUFFIX := tar.bz2
> -IPUTILS_URL := http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX)
> +IPUTILS_SUFFIX := tar.gz
> +IPUTILS_URL := http://codeload.github.com/iputils/iputils/$(IPUTILS_SUFFIX)/$(IPUTILS_VERSION)
This URL is broken.
Michael
> IPUTILS_SOURCE := $(SRCDIR)/$(IPUTILS).$(IPUTILS_SUFFIX)
> IPUTILS_DIR := $(BUILDDIR)/$(IPUTILS)
> IPUTILS_LICENSE := GPL-2.0
> @@ -34,16 +34,14 @@ IPUTILS_TOOLS-y :=
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_ARPING) += arping
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_CLOCKDIFF) += clockdiff
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING) += ping
> -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_PING6) += ping6
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RARPD) += rarpd
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_RDISC) += rdisc
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TFTPD) += tftpd
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH) += tracepath
> -IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEPATH6) += tracepath6
> IPUTILS_TOOLS-$(PTXCONF_IPUTILS_TRACEROUTE6) += traceroute6
>
> IPUTILS_CONF_TOOL := NO
> -IPUTILS_MAKEVARS := $(CROSS_ENV) TARGETS="$(IPUTILS_TOOLS-y)"
> +IPUTILS_MAKEVARS := $(CROSS_ENV) USE_IDN=no TARGETS="$(IPUTILS_TOOLS-y)"
>
> # ----------------------------------------------------------------------------
> # Install
> --
> 2.10.2
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2016-12-16 14:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-15 13:50 [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Clemens Gruber
2016-12-15 13:50 ` [ptxdist] [PATCH 2/2] iputils: update to version s20161105 Clemens Gruber
2016-12-16 14:35 ` Michael Olbrich [this message]
2016-12-16 14:43 ` Clemens Gruber
2016-12-16 14:50 ` Michael Olbrich
2016-12-16 15:00 ` [ptxdist] [PATCH 1/2] nettle: update to version 3.3 Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161216143530.cnmyluws2gonrx64@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox