From: Ladislav Michl <ladis@linux-mips.org>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] usb-modeswitch-data: new package
Date: Mon, 18 Jul 2016 13:24:51 +0200 [thread overview]
Message-ID: <20160718112451.GB6594@localhost.localdomain> (raw)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
Note: This package uses ':' in filenames
(this is just a resend of the same patch sent a few months ago)
rules/usb-modeswitch-data.in | 10 ++++++
rules/usb-modeswitch-data.make | 70 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
create mode 100644 rules/usb-modeswitch-data.in
create mode 100644 rules/usb-modeswitch-data.make
diff --git a/rules/usb-modeswitch-data.in b/rules/usb-modeswitch-data.in
new file mode 100644
index 0000000..ffaacda
--- /dev/null
+++ b/rules/usb-modeswitch-data.in
@@ -0,0 +1,10 @@
+## SECTION=shell_and_console
+
+config USB_MODESWITCH_DATA
+ tristate
+ prompt "usb-modeswitch-data"
+ depends on USB_MODESWITCH && UDEV
+ help
+ Device database and udev rules file for USB_ModeSwitch.
+
+# vim: set sw=8 ts=8 noet ft=kconfig:
diff --git a/rules/usb-modeswitch-data.make b/rules/usb-modeswitch-data.make
new file mode 100644
index 0000000..6b12898
--- /dev/null
+++ b/rules/usb-modeswitch-data.make
@@ -0,0 +1,70 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2016 by Ladislav Michl <ladis@linux-mips.org>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_USB_MODESWITCH_DATA) += usb-modeswitch-data
+
+#
+# Paths and names
+#
+USB_MODESWITCH_DATA_VERSION := 20160112
+USB_MODESWITCH_DATA_MD5 := 040d11138fc0a61b980d704ac3b4547f
+USB_MODESWITCH_DATA := usb-modeswitch-data-$(USB_MODESWITCH_DATA_VERSION)
+USB_MODESWITCH_DATA_SUFFIX := tar.bz2
+USB_MODESWITCH_DATA_URL := http://www.draisberghof.de/usb_modeswitch/$(USB_MODESWITCH_DATA).$(USB_MODESWITCH_DATA_SUFFIX)
+USB_MODESWITCH_DATA_SOURCE := $(SRCDIR)/$(USB_MODESWITCH_DATA).$(USB_MODESWITCH_DATA_SUFFIX)
+USB_MODESWITCH_DATA_DIR := $(BUILDDIR)/$(USB_MODESWITCH_DATA)
+USB_MODESWITCH_DATA_LICENSE := GPL-2.0
+
+
+# ----------------------------------------------------------------------------
+# Nothing to Compile
+# ----------------------------------------------------------------------------
+$(STATEDIR)/usb-modeswitch-data.compile:
+ @$(call targetinfo)
+ @$(call touch)
+
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+USB_MODESWITCH_DATA_CONF_TOOL := NO
+USB_MODESWITCH_DATA_MAKE_ENV := $(CROSS_ENV)
+USB_MODESWITCH_DATA_INSTALL_OPT := db-install
+
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+$(STATEDIR)/usb-modeswitch-data.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, usb-modeswitch-data)
+ @$(call install_fixup, usb-modeswitch-data,PRIORITY,optional)
+ @$(call install_fixup, usb-modeswitch-data,SECTION,base)
+ @$(call install_fixup, usb-modeswitch-data,AUTHOR,"Ladislav Michl <ladis@linux-mips.org>")
+ @$(call install_fixup, usb-modeswitch-data,DESCRIPTION,missing)
+
+ @$(call install_copy, usb-modeswitch-data, 0, 0, 0644, -, \
+ /lib/udev/rules.d/40-usb_modeswitch.rules)
+
+ @cd $(USB_MODESWITCH_DATA_PKGDIR) && \
+ for f in `find usr/share/usb_modeswitch/ -type f`; do \
+ $(call install_copy, usb-modeswitch-data, 0, 0, 0644, -, /$$f); \
+ done
+
+ @$(call install_finish, usb-modeswitch-data)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.1.4
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
reply other threads:[~2016-07-18 11:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160718112451.GB6594@localhost.localdomain \
--to=ladis@linux-mips.org \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox