From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 1/5] iptables: bump version to 1.6.0 and update compile switches
Date: Thu, 7 Apr 2016 12:55:23 +0200 [thread overview]
Message-ID: <20160407105523.GD31935@pengutronix.de> (raw)
In-Reply-To: <1459956027-887-1-git-send-email-Andreas.Geisenhainer@atsonline.de>
On Wed, Apr 06, 2016 at 05:20:23PM +0200, Andreas Geisenhainer wrote:
> - since iptables 1.6.0 depends on libnftnl, this patchset adds support
> for nftables, too.
> nftables should be used on sufficient new kernel, somewhere around 4.2
> should be ok.
> - new libraries to resolv dependencies are
> - libnftnl
> - libmnl
>
> Signed-off-by: Andreas Geisenhainer <Andreas.Geisenhainer@atsonline.de>
> ---
> rules/iptables.in | 18 ++++++++++++++++++
> rules/iptables.make | 47 +++++++++++++++++++++++++++++++++++++++++------
> 2 files changed, 59 insertions(+), 6 deletions(-)
>
> diff --git a/rules/iptables.in b/rules/iptables.in
> index e6f3699..6e4bc91 100644
> --- a/rules/iptables.in
> +++ b/rules/iptables.in
> @@ -7,6 +7,7 @@ menuconfig IPTABLES
> select LIBC_M
> select LIBC_DL
> select GCCLIBS_GCC_S
> + select LIBNFTNL
Please reorder your patches so libnftnl is actually available.
> select LIBNFNETLINK if IPTABLES_LIBNFNETLINK
> help
> Iptables is used to set up, maintain, and inspect the
> @@ -32,6 +33,16 @@ config IPTABLES_LIBIPQ
> Builds and installs libipq (the iptables userspace packet
> queuing library).
>
> +config IPTABLES_BPF_COMPILE
> + bool
> + prompt "install BPF_compile"
Maybe we could enable this unconditionally? I guessing the binary will be
rather small and this doesn't introduce any new external dependencies.
> + help
> + Enable for the Berkeley Packet Filter(BPF) compile helper program.
> +
> +config IPTABLES_NFSYNPROXY
> + bool
> + prompt "install nfsynproxy"
Same here. What's this for anyways?
> +
> config IPTABLES_INSTALL_TOOLS
> bool "install executables"
> help
> @@ -61,4 +72,11 @@ config IPTABLES_LIBNFNETLINK
> help
> Select if iptables should be build against libnfnetlink
>
> +config IPTABLES_NFTABLES_COMPAT
> + bool
> + select NFTABLES
> + prompt "nftables compat"
> + help
> + build with nftables compability support
> +
> endif
> diff --git a/rules/iptables.make b/rules/iptables.make
> index 8a1ea66..90df197 100644
> --- a/rules/iptables.make
> +++ b/rules/iptables.make
> @@ -4,6 +4,8 @@
> # 2007 by Carsten Schlote, konzeptpark
> # 2008 by Juergen Beisert
> # 2009 by Marc Kleine-Budde <mkl@pengutronix.de>
> +# 2016 by Andreas Geisenhainer <andreas.geisenhainer@atsonline.de>
> +#
> #
> # See CREDITS for details about who has contributed to this project.
> #
> @@ -19,8 +21,8 @@ PACKAGES-$(PTXCONF_IPTABLES) += iptables
> #
> # Paths and names
> #
> -IPTABLES_VERSION := 1.4.21
> -IPTABLES_MD5 := 536d048c8e8eeebcd9757d0863ebb0c0
> +IPTABLES_VERSION := 1.6.0
> +IPTABLES_MD5 := 27ba3451cb622467fc9267a176f19a31
> IPTABLES := iptables-$(IPTABLES_VERSION)
> IPTABLES_SUFFIX := tar.bz2
> IPTABLES_URL := http://ftp.netfilter.org/pub/iptables/$(IPTABLES).$(IPTABLES_SUFFIX)
> @@ -43,12 +45,15 @@ IPTABLES_CONF_OPT := \
> $(GLOBAL_LARGE_FILE_OPTION) \
> --enable-devel \
> --$(call ptx/endis, PTXCONF_IPTABLES_LIBIPQ)-libipq \
> + --$(call ptx/endis, PTXCONF_IPTABLES_BPF_COMPILE)-bpf-compiler \
> + --$(call ptx/endis, PTXCONF_IPTABLES_NFTABLES_COMPAT)-nftables \
> + --$(call ptx/endis, PTXCONF_IPTABLES_NFSYNPROXY)-nfsynproxy \
Make sure --disable-* works correctly now. Otherwise you need to use:
$(call ptx/ifdef, PTXCONF_IPTABLES_...,--enable-...)
> --with-kernel=$(KERNEL_HEADERS_DIR) \
> --with-xtlibdir=/usr/lib
>
> -## broken configure.ac, so setting these would _enable_ the options:
> -# --disable-bpf-compiler
> -# --disable-nfsynproxy
> +# static build is possible, but probably not useful. expand with:
> +# --enable-static --disable-shared
No need to comment on shared/static options. It's the same for everything.
Michael
> +
>
> # ----------------------------------------------------------------------------
> # Install
> @@ -110,8 +115,8 @@ endif
>
> ifdef PTXCONF_IPTABLES_INSTALL_TOOLS
> @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/xtables-multi)
> -
> @$(call install_link, iptables, ../sbin/xtables-multi, /usr/bin/iptables-xml)
> + @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/nfnl_osf)
>
> ifdef PTXCONF_IPTABLES_IPV6
> # # IPv6 part
> @@ -132,6 +137,36 @@ ifdef PTXCONF_IPTABLES_INSTALL_IPTABLES_APPLY
> @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/iptables-apply)
> endif
>
> +# # nftables compability layer
> +ifdef PTXCONF_IPTABLES_NFTABLES_COMPAT
> + @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/xtables-compat-multi)
> +
> +ifdef PTXCONF_IPTABLES_IPV4
> +# # IPv4 part
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/iptables-compat)
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/iptables-compat-save)
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/iptables-compat-restore)
> +endif
> +
> +ifdef PTXCONF_IPTABLES_IPV6
> +# # IPv6 part
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/ip6tables-compat)
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/ip6tables-compat-save)
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/ip6tables-compat-restore)
> +endif
> +
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/arptables-compat)
> + @$(call install_link, iptables, xtables-compat-multi, /usr/sbin/ebtables-compat)
> +endif
> +
> +ifdef PTXCONF_IPTABLES_NFSYNPROXY
> + @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/nfsynproxy)
> +endif
> +
> +ifdef PTXCONF_IPTABLES_BPF_COMPILE
> + @$(call install_copy, iptables, 0, 0, 0755, -, /usr/sbin/nfbpf_compile)
> +endif
> +
> @$(call install_finish, iptables)
>
> @$(call touch)
> --
> 2.8.0.rc3
>
> ____________
> Virus checked by G Data MailSecurity
> Version: AVA 25.6071 dated 06.04.2016
> Virus news: www.antiviruslab.com.
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2016-04-07 10:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 15:20 Andreas Geisenhainer
2016-04-06 15:20 ` [ptxdist] [PATCH 2/5] libnfnetlink: bump version to 1.01 Andreas Geisenhainer
2016-04-06 15:20 ` [ptxdist] [PATCH 3/5] libnftnl: resolves new dependency on libnftnl by iptables Andreas Geisenhainer
2016-04-07 10:59 ` Michael Olbrich
2016-04-06 15:20 ` [ptxdist] [PATCH 4/5] nftables: adds new package nftables in version 0.5 Andreas Geisenhainer
2016-04-07 11:17 ` Michael Olbrich
2016-04-06 15:20 ` [ptxdist] [PATCH 5/5] libmnl: resolvs dependency to libmnl by nftables by adding libmnl-package Andreas Geisenhainer
2016-04-07 10:55 ` Michael Olbrich [this message]
2016-04-07 14:23 ` [ptxdist] [PATCH 1/5] iptables: bump version to 1.6.0 and updatecompile switches Andreas Geisenhainer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160407105523.GD31935@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox