* [ptxdist] [PATCH] vrrpd: add vrrpd as specified in rfc2338 to ptxdist
@ 2015-12-10 8:44 Oliver Graute
2015-12-17 10:12 ` Michael Olbrich
0 siblings, 1 reply; 2+ messages in thread
From: Oliver Graute @ 2015-12-10 8:44 UTC (permalink / raw)
To: ptxdist; +Cc: Oliver Graute
VRRPd is an implementation of VRRPv2 as specified in rfc2338.
Signed-off-by: Oliver Graute <oliver.graute@neuhaus.de>
---
...-fix-undefined-reference-to-clock_gettime.patch | 21 +++++
patches/Vrrpd-1.13/series | 1 +
rules/vrrpd.in | 9 ++
rules/vrrpd.make | 88 ++++++++++++++++++++
4 files changed, 119 insertions(+)
create mode 100644 patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
create mode 100644 patches/Vrrpd-1.13/series
create mode 100644 rules/vrrpd.in
create mode 100644 rules/vrrpd.make
diff --git a/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch b/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
new file mode 100644
index 0000000..f99a08f
--- /dev/null
+++ b/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
@@ -0,0 +1,21 @@
+From: Oliver Graute <oliver.graute@neuhaus.de>
+Date: Thu, 9 Jul 2015 11:12:41 +0200
+Subject: [PATCH] fix undefined reference to clock_gettime
+
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 9278378..c57bd71 100644
+--- a/Makefile
++++ b/Makefile
+@@ -26,7 +26,7 @@ vrrpd : $(VRRPD_OBJS)
+ $(CC) $(PROF_OPT) -o $@ $^ -lrt $(LINKLIB)
+
+ atropos:$(ATROPOS_OBJS)
+- $(CC) $(PROF_OPT) -o $@ -lrt $^
++ $(CC) $(PROF_OPT) -o $@ $^ -lrt
+
+ vrrpd.o: vrrpd.h
+ libnetlink.o: libnetlink.h
diff --git a/patches/Vrrpd-1.13/series b/patches/Vrrpd-1.13/series
new file mode 100644
index 0000000..7970a7a
--- /dev/null
+++ b/patches/Vrrpd-1.13/series
@@ -0,0 +1 @@
+0001-fix-undefined-reference-to-clock_gettime.patch
diff --git a/rules/vrrpd.in b/rules/vrrpd.in
new file mode 100644
index 0000000..e94111b
--- /dev/null
+++ b/rules/vrrpd.in
@@ -0,0 +1,9 @@
+## SECTION=networking
+
+config VRRPD
+ tristate
+ prompt "vrrpd"
+ help
+ VRRPd is an implementation of VRRPv2 as specified in rfc2338. It run
+ in userspace for linux. In short, VRRP is a protocol which elects a
+ master server on a LAN. If the master fails, a backup server takes over.
diff --git a/rules/vrrpd.make b/rules/vrrpd.make
new file mode 100644
index 0000000..aa97970
--- /dev/null
+++ b/rules/vrrpd.make
@@ -0,0 +1,88 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2015 Dr. Neuhaus Telekommunikation GmbH, Hamburg Germany, Oliver Graute <oliver.graute@neuhaus.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_VRRPD) += vrrpd
+
+#
+# Paths and names
+#
+VRRPD_VERSION := 1.13
+VRRPD_MD5 := c77e5424407e9a40abfd7d95c16336d6
+VRRPD := Vrrpd-$(VRRPD_VERSION)
+VRRPD_SUFFIX := tar.gz
+VRRPD_URL := https://github.com/fredbcode/Vrrpd/archive/v$(VRRPD_VERSION).$(VRRPD_SUFFIX)
+VRRPD_SOURCE := $(SRCDIR)/$(VRRPD).$(VRRPD_SUFFIX)
+VRRPD_DIR := $(BUILDDIR)/$(VRRPD)
+VRRPD_LICENSE := GPLv2
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+VRRPD_CONF_ENV := $(CROSS_ENV)
+
+VRRPD_CONF_TOOL := NO
+VRRPD_MAKE_OPT := \
+ $(CROSS_ENV_CC) \
+ PREFIX=/usr
+VRRPD_INSTALL_OPT := \
+ $(DHCP_HELPER_MAKE_OPT) \
+ install
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/vrrpd.compile:
+ @$(call targetinfo)
+ @$(call world/compile, VRRPD)
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/vrrpd.install:
+# @$(call targetinfo)
+# @$(call world/install, VRRPD)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/vrrpd.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, vrrpd)
+ @$(call install_fixup, vrrpd,PRIORITY,optional)
+ @$(call install_fixup, vrrpd,SECTION,base)
+ @$(call install_fixup, vrrpd,AUTHOR,"oliver.graute@neuhaus.de")
+ @$(call install_fixup, vrrpd,DESCRIPTION,missing)
+
+ @$(call install_copy, vrrpd, 0, 0, 0755, $(VRRPD_DIR)/vrrpd, /usr/sbin/vrrpd)
+ @$(call install_copy, vrrpd, 0, 0, 0755, $(VRRPD_DIR)/atropos, /usr/sbin/atropos)
+
+ @$(call install_finish, vrrpd)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/vrrpd.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, VRRPD)
+
+# vim: syntax=make
--
1.7.9.5
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ptxdist] [PATCH] vrrpd: add vrrpd as specified in rfc2338 to ptxdist
2015-12-10 8:44 [ptxdist] [PATCH] vrrpd: add vrrpd as specified in rfc2338 to ptxdist Oliver Graute
@ 2015-12-17 10:12 ` Michael Olbrich
0 siblings, 0 replies; 2+ messages in thread
From: Michael Olbrich @ 2015-12-17 10:12 UTC (permalink / raw)
To: ptxdist
On Thu, Dec 10, 2015 at 09:44:54AM +0100, Oliver Graute wrote:
> VRRPd is an implementation of VRRPv2 as specified in rfc2338.
>
> Signed-off-by: Oliver Graute <oliver.graute@neuhaus.de>
> ---
> ...-fix-undefined-reference-to-clock_gettime.patch | 21 +++++
> patches/Vrrpd-1.13/series | 1 +
> rules/vrrpd.in | 9 ++
> rules/vrrpd.make | 88 ++++++++++++++++++++
> 4 files changed, 119 insertions(+)
> create mode 100644 patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
> create mode 100644 patches/Vrrpd-1.13/series
> create mode 100644 rules/vrrpd.in
> create mode 100644 rules/vrrpd.make
>
> diff --git a/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch b/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
Add a proper patch header
> new file mode 100644
> index 0000000..f99a08f
> --- /dev/null
> +++ b/patches/Vrrpd-1.13/0001-fix-undefined-reference-to-clock_gettime.patch
> @@ -0,0 +1,21 @@
> +From: Oliver Graute <oliver.graute@neuhaus.de>
> +Date: Thu, 9 Jul 2015 11:12:41 +0200
> +Subject: [PATCH] fix undefined reference to clock_gettime
> +
> +---
> + Makefile | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/Makefile b/Makefile
> +index 9278378..c57bd71 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -26,7 +26,7 @@ vrrpd : $(VRRPD_OBJS)
> + $(CC) $(PROF_OPT) -o $@ $^ -lrt $(LINKLIB)
> +
> + atropos:$(ATROPOS_OBJS)
> +- $(CC) $(PROF_OPT) -o $@ -lrt $^
> ++ $(CC) $(PROF_OPT) -o $@ $^ -lrt
> +
> + vrrpd.o: vrrpd.h
> + libnetlink.o: libnetlink.h
> diff --git a/patches/Vrrpd-1.13/series b/patches/Vrrpd-1.13/series
> new file mode 100644
> index 0000000..7970a7a
> --- /dev/null
> +++ b/patches/Vrrpd-1.13/series
> @@ -0,0 +1 @@
> +0001-fix-undefined-reference-to-clock_gettime.patch
> diff --git a/rules/vrrpd.in b/rules/vrrpd.in
> new file mode 100644
> index 0000000..e94111b
> --- /dev/null
> +++ b/rules/vrrpd.in
> @@ -0,0 +1,9 @@
> +## SECTION=networking
> +
> +config VRRPD
> + tristate
> + prompt "vrrpd"
> + help
> + VRRPd is an implementation of VRRPv2 as specified in rfc2338. It run
> + in userspace for linux. In short, VRRP is a protocol which elects a
> + master server on a LAN. If the master fails, a backup server takes over.
> diff --git a/rules/vrrpd.make b/rules/vrrpd.make
> new file mode 100644
> index 0000000..aa97970
> --- /dev/null
> +++ b/rules/vrrpd.make
> @@ -0,0 +1,88 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2015 Dr. Neuhaus Telekommunikation GmbH, Hamburg Germany, Oliver Graute <oliver.graute@neuhaus.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_VRRPD) += vrrpd
> +
> +#
> +# Paths and names
> +#
> +VRRPD_VERSION := 1.13
> +VRRPD_MD5 := c77e5424407e9a40abfd7d95c16336d6
> +VRRPD := Vrrpd-$(VRRPD_VERSION)
> +VRRPD_SUFFIX := tar.gz
> +VRRPD_URL := https://github.com/fredbcode/Vrrpd/archive/v$(VRRPD_VERSION).$(VRRPD_SUFFIX)
> +VRRPD_SOURCE := $(SRCDIR)/$(VRRPD).$(VRRPD_SUFFIX)
> +VRRPD_DIR := $(BUILDDIR)/$(VRRPD)
> +VRRPD_LICENSE := GPLv2
GPL-2.0 (we use SPDX license identifiers now)
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +VRRPD_CONF_ENV := $(CROSS_ENV)
> +
> +VRRPD_CONF_TOOL := NO
> +VRRPD_MAKE_OPT := \
> + $(CROSS_ENV_CC) \
> + PREFIX=/usr
> +VRRPD_INSTALL_OPT := \
> + $(DHCP_HELPER_MAKE_OPT) \
This should be VRRPD_MAKE_OPT right?
See my comments to the other patches for the rest.
Michael
> + install
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/vrrpd.compile:
> + @$(call targetinfo)
> + @$(call world/compile, VRRPD)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/vrrpd.install:
> +# @$(call targetinfo)
> +# @$(call world/install, VRRPD)
> +# @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/vrrpd.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, vrrpd)
> + @$(call install_fixup, vrrpd,PRIORITY,optional)
> + @$(call install_fixup, vrrpd,SECTION,base)
> + @$(call install_fixup, vrrpd,AUTHOR,"oliver.graute@neuhaus.de")
> + @$(call install_fixup, vrrpd,DESCRIPTION,missing)
> +
> + @$(call install_copy, vrrpd, 0, 0, 0755, $(VRRPD_DIR)/vrrpd, /usr/sbin/vrrpd)
> + @$(call install_copy, vrrpd, 0, 0, 0755, $(VRRPD_DIR)/atropos, /usr/sbin/atropos)
> +
> + @$(call install_finish, vrrpd)
> +
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/vrrpd.clean:
> +# @$(call targetinfo)
> +# @$(call clean_pkg, VRRPD)
> +
> +# vim: syntax=make
> --
> 1.7.9.5
>
>
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-12-17 10:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-10 8:44 [ptxdist] [PATCH] vrrpd: add vrrpd as specified in rfc2338 to ptxdist Oliver Graute
2015-12-17 10:12 ` Michael Olbrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox