* [ptxdist] [PATCH] Dropbear: version bump 2014.65 -> 2015.67
@ 2015-03-16 13:29 Juergen Borleis
0 siblings, 0 replies; 4+ messages in thread
From: Juergen Borleis @ 2015-03-16 13:29 UTC (permalink / raw)
To: ptxdist
And additionally clean up the rule file.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
diff --git a/patches/dropbear-2015.67/0001-dropbear-disabling-ENABLE_CLI_PUBKEY_AUTH-let-the-bu.patch
b/patches/dropbear-2015.67/0001-dropbear-disabling-ENABLE_CLI_PUBKEY_AUTH-let-the-bu.patch
new file mode 100644
index 000000000000..6fc655a95945
--- /dev/null
+++ b/patches/dropbear-2015.67/0001-dropbear-disabling-ENABLE_CLI_PUBKEY_AUTH-let-the-bu.patch
@@ -0,0 +1,45 @@
+From: Juergen Borleis <jbe@pengutronix.de>
+Date: Fri, 13 Mar 2015 10:53:46 +0100
+Subject: [PATCH] dropbear: disabling ENABLE_CLI_PUBKEY_AUTH let the build
+ fail
+
+Function multihop_passthrough_args() fails due to missing 'privkeys' member
+in structure 'cli_runopts'. So lets also disable ENABLE_CLI_MULTIHOP for
+this case.
+And even cli_getopts() fails due to missing loadidentityfile() function
+in this case.
+
+Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
+---
+ options.h | 4 +++-
+ sysoptions.h | 2 +-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/options.h b/options.h
+index 6339b0a4738e..1360b5c6758f 100644
+--- a/options.h
++++ b/options.h
+@@ -218,7 +218,9 @@ much traffic. */
+
+ /* A default argument for dbclient -i <privatekey>.
+ leading "~" is expanded */
+-#define DROPBEAR_DEFAULT_CLI_AUTHKEY "~/.ssh/id_dropbear"
++#ifdef ENABLE_CLI_PUBKEY_AUTH
++# define DROPBEAR_DEFAULT_CLI_AUTHKEY "~/.ssh/id_dropbear"
++#endif
+
+ /* This variable can be used to set a password for client
+ * authentication on the commandline. Beware of platforms
+diff --git a/sysoptions.h b/sysoptions.h
+index bec72461d8e4..eeb78cb129a5 100644
+--- a/sysoptions.h
++++ b/sysoptions.h
+@@ -202,7 +202,7 @@
+ #define USING_LISTENERS
+ #endif
+
+-#if defined(ENABLE_CLI_NETCAT) && defined(ENABLE_CLI_PROXYCMD)
++#if defined(ENABLE_CLI_NETCAT) && defined(ENABLE_CLI_PROXYCMD) && defined(ENABLE_CLI_PUBKEY_AUTH)
+ #define ENABLE_CLI_MULTIHOP
+ #endif
+
diff --git a/patches/dropbear-2015.67/series b/patches/dropbear-2015.67/series
new file mode 100644
index 000000000000..501905e990c5
--- /dev/null
+++ b/patches/dropbear-2015.67/series
@@ -0,0 +1,4 @@
+# generated by git-ptx-patches
+#tag:base --start-number 1
+0001-dropbear-disabling-ENABLE_CLI_PUBKEY_AUTH-let-the-bu.patch
+# 847698d613b5ea08c9504df4ed3f0099 - git-ptx-patches magic
diff --git a/rules/dropbear.make b/rules/dropbear.make
index f03d0fc0df24..2240d556fc8e 100644
--- a/rules/dropbear.make
+++ b/rules/dropbear.make
@@ -18,8 +18,8 @@ PACKAGES-$(PTXCONF_DROPBEAR) += dropbear
#
# Paths and names
#
-DROPBEAR_VERSION := 2014.65
-DROPBEAR_MD5 := 1918604238817385a156840fa2c39490
+DROPBEAR_VERSION := 2015.67
+DROPBEAR_MD5 := e967e320344cd4bfebe321e3ab8514d6
DROPBEAR := dropbear-$(DROPBEAR_VERSION)
DROPBEAR_SUFFIX := tar.bz2
DROPBEAR_URL := http://matt.ucc.asn.au/dropbear/releases/$(DROPBEAR).$(DROPBEAR_SUFFIX)
@@ -33,50 +33,24 @@ DROPBEAR_DIR := $(BUILDDIR)/$(DROPBEAR)
#
# autoconf
#
-DROPBEAR_AUTOCONF := \
- $(CROSS_AUTOCONF_USR)
-
-ifdef PTXCONF_DROPBEAR_ZLIB
-DROPBEAR_AUTOCONF += --enable-zlib
-else
-DROPBEAR_AUTOCONF += --disable-zlib
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_OPENPTY
-DROPBEAR_AUTOCONF += --disable-openpty
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_SYSLOG
-DROPBEAR_AUTOCONF += --disable-syslog
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_LASTLOG
-DROPBEAR_AUTOCONF += --disable-lastlog
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_UTMP
-DROPBEAR_AUTOCONF += --disable-utmp
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_UTMPX
-DROPBEAR_AUTOCONF += --disable-utmpx
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_WTMP
-DROPBEAR_AUTOCONF += --disable-wtmp
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_WTMPX
-DROPBEAR_AUTOCONF += --disable-wtmpx
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_PUTUTLINE
-DROPBEAR_AUTOCONF += --disable-pututline
-endif
-
-ifdef PTXCONF_DROPBEAR_DIS_PUTUTXLINE
-DROPBEAR_AUTOCONF += --disable-pututxline
-endif
+DROPBEAR_CONF_TOOL := autoconf
+DROPBEAR_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ $(GLOBAL_LARGE_FILE_OPTION) \
+ --$(call ptx/endis, PTXCONF_DROPBEAR_ZLIB)-zlib \
+ --disable-pam \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_OPENPTY)-openpty \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_SYSLOG)-syslog \
+ --enable-shadow \
+ --enable-bundled-libtom \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_LASTLOG)-lastlog \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_UTMP)-utmp \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_UTMPX)-utmpx \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_WTMP)-wtmp \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_WTMPX)-wtmpx \
+ --disable-loginfunc \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_PUTUTLINE)-pututline \
+ --$(call ptx/disen, PTXCONF_DROPBEAR_DIS_PUTUTXLINE)-pututxline
$(STATEDIR)/dropbear.prepare:
@$(call targetinfo)
--
Pengutronix e.K. | Juergen Borleis |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ptxdist] [PATCH] dropbear: version bump 2014.65 -> 2015.67
@ 2015-02-16 15:47 Bruno Thomsen
2015-02-19 14:09 ` Michael Olbrich
0 siblings, 1 reply; 4+ messages in thread
From: Bruno Thomsen @ 2015-02-16 15:47 UTC (permalink / raw)
To: ptxdist; +Cc: bth
The new version contain options to enable/disable cipher modes.
Keeping today's default cipher mode.
In a secure solution one would disable CBC and enable CTR.
Signed-off-by: Bruno Thomsen <bth@kamstrup.com>
---
rules/dropbear.in | 15 +++++++++++++++
rules/dropbear.make | 18 ++++++++++++++++--
2 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/rules/dropbear.in b/rules/dropbear.in
index fe2ada3..79aad57 100644
--- a/rules/dropbear.in
+++ b/rules/dropbear.in
@@ -203,6 +203,21 @@ config DROPBEAR_TWOFISH256
bijective f function made by four key-dependent
8x8-bit S-boxes.
+config DROPBEAR_CBC_CIPHERS
+ bool
+ prompt "CBC mode ciphers"
+ default y
+ help
+ Enable CBC mode for ciphers. This has security issues though
+ is the most compatible with older SSH implementations.
+
+config DROPBEAR_CTR_CIPHERS
+ bool
+ prompt "Counter mode ciphers"
+ help
+ Enable "Counter Mode" for ciphers. This is more secure than normal
+ CBC mode against certain attacks. This adds around 1kB to binary
+ size and is recommended for most cases.
comment "Integrity, at least one required --- RFC Draft requires sha1-hmac and recommends sha1-96"
diff --git a/rules/dropbear.make b/rules/dropbear.make
index f03d0fc..ab9da5d 100644
--- a/rules/dropbear.make
+++ b/rules/dropbear.make
@@ -18,8 +18,8 @@ PACKAGES-$(PTXCONF_DROPBEAR) += dropbear
#
# Paths and names
#
-DROPBEAR_VERSION := 2014.65
-DROPBEAR_MD5 := 1918604238817385a156840fa2c39490
+DROPBEAR_VERSION := 2015.67
+DROPBEAR_MD5 := e967e320344cd4bfebe321e3ab8514d6
DROPBEAR := dropbear-$(DROPBEAR_VERSION)
DROPBEAR_SUFFIX := tar.bz2
DROPBEAR_URL := http://matt.ucc.asn.au/dropbear/releases/$(DROPBEAR).$(DROPBEAR_SUFFIX)
@@ -163,7 +163,21 @@ else
@$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_TWOFISH128)
endif
+ifdef PTXCONF_DROPBEAR_CBC_CIPHERS
+ @echo "ptxdist: enabling cbc ciphers"
+ @$(call enable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CBC_MODE)
+else
+ @echo "ptxdist: disabling cbc ciphers"
+ @$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CBC_MODE)
+endif
+ifdef PTXCONF_DROPBEAR_CTR_CIPHERS
+ @echo "ptxdist: enabling ctr ciphers"
+ @$(call enable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CTR_MODE)
+else
+ @echo "ptxdist: disabling ctr ciphers"
+ @$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CTR_MODE)
+endif
ifdef PTXCONF_DROPBEAR_SHA1
@echo "ptxdist: enabling sha1"
--
1.9.1
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] dropbear: version bump 2014.65 -> 2015.67
2015-02-16 15:47 [ptxdist] [PATCH] dropbear: " Bruno Thomsen
@ 2015-02-19 14:09 ` Michael Olbrich
2015-02-19 14:48 ` Bruno Thomsen
0 siblings, 1 reply; 4+ messages in thread
From: Michael Olbrich @ 2015-02-19 14:09 UTC (permalink / raw)
To: ptxdist
On Mon, Feb 16, 2015 at 04:47:09PM +0100, Bruno Thomsen wrote:
> The new version contain options to enable/disable cipher modes.
> Keeping today's default cipher mode.
> In a secure solution one would disable CBC and enable CTR.
>
> Signed-off-by: Bruno Thomsen <bth@kamstrup.com>
> ---
> rules/dropbear.in | 15 +++++++++++++++
> rules/dropbear.make | 18 ++++++++++++++++--
> 2 files changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/rules/dropbear.in b/rules/dropbear.in
> index fe2ada3..79aad57 100644
> --- a/rules/dropbear.in
> +++ b/rules/dropbear.in
> @@ -203,6 +203,21 @@ config DROPBEAR_TWOFISH256
> bijective f function made by four key-dependent
> 8x8-bit S-boxes.
>
> +config DROPBEAR_CBC_CIPHERS
> + bool
> + prompt "CBC mode ciphers"
> + default y
> + help
> + Enable CBC mode for ciphers. This has security issues though
> + is the most compatible with older SSH implementations.
In that case, shouldn't this be off by default? Those that still need it
can enable it.
Michael
> +
> +config DROPBEAR_CTR_CIPHERS
> + bool
> + prompt "Counter mode ciphers"
> + help
> + Enable "Counter Mode" for ciphers. This is more secure than normal
> + CBC mode against certain attacks. This adds around 1kB to binary
> + size and is recommended for most cases.
>
> comment "Integrity, at least one required --- RFC Draft requires sha1-hmac and recommends sha1-96"
>
> diff --git a/rules/dropbear.make b/rules/dropbear.make
> index f03d0fc..ab9da5d 100644
> --- a/rules/dropbear.make
> +++ b/rules/dropbear.make
> @@ -18,8 +18,8 @@ PACKAGES-$(PTXCONF_DROPBEAR) += dropbear
> #
> # Paths and names
> #
> -DROPBEAR_VERSION := 2014.65
> -DROPBEAR_MD5 := 1918604238817385a156840fa2c39490
> +DROPBEAR_VERSION := 2015.67
> +DROPBEAR_MD5 := e967e320344cd4bfebe321e3ab8514d6
> DROPBEAR := dropbear-$(DROPBEAR_VERSION)
> DROPBEAR_SUFFIX := tar.bz2
> DROPBEAR_URL := http://matt.ucc.asn.au/dropbear/releases/$(DROPBEAR).$(DROPBEAR_SUFFIX)
> @@ -163,7 +163,21 @@ else
> @$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_TWOFISH128)
> endif
>
> +ifdef PTXCONF_DROPBEAR_CBC_CIPHERS
> + @echo "ptxdist: enabling cbc ciphers"
> + @$(call enable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CBC_MODE)
> +else
> + @echo "ptxdist: disabling cbc ciphers"
> + @$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CBC_MODE)
> +endif
>
> +ifdef PTXCONF_DROPBEAR_CTR_CIPHERS
> + @echo "ptxdist: enabling ctr ciphers"
> + @$(call enable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CTR_MODE)
> +else
> + @echo "ptxdist: disabling ctr ciphers"
> + @$(call disable_c, $(DROPBEAR_DIR)/options.h,DROPBEAR_ENABLE_CTR_MODE)
> +endif
>
> ifdef PTXCONF_DROPBEAR_SHA1
> @echo "ptxdist: enabling sha1"
> --
> 1.9.1
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ptxdist] [PATCH] dropbear: version bump 2014.65 -> 2015.67
2015-02-19 14:09 ` Michael Olbrich
@ 2015-02-19 14:48 ` Bruno Thomsen
0 siblings, 0 replies; 4+ messages in thread
From: Bruno Thomsen @ 2015-02-19 14:48 UTC (permalink / raw)
To: ptxdist
> > +config DROPBEAR_CBC_CIPHERS
> > + bool
> > + prompt "CBC mode ciphers"
> > + default y
> > + help
> > + Enable CBC mode for ciphers. This has security issues though
> > + is the most compatible with older SSH implementations.
>
> In that case, shouldn't this be off by default? Those that still need it can enable it.
I was a bit in doubt about ptxdist default policy was to be fairly secure out-of-box or compatible with old software/equipment.
I'm all in for pushing a strong default security configuration :)
Bruno
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-03-16 13:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-16 13:29 [ptxdist] [PATCH] Dropbear: version bump 2014.65 -> 2015.67 Juergen Borleis
-- strict thread matches above, loose matches on Subject: below --
2015-02-16 15:47 [ptxdist] [PATCH] dropbear: " Bruno Thomsen
2015-02-19 14:09 ` Michael Olbrich
2015-02-19 14:48 ` Bruno Thomsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox