[ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Andreas Pretzsch]

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
---
 ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
 ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  20 +++
 patches/openocd-0.8.0/series                       |   4 +
 rules/host-openocd.in                              | 199 +++++++++++++++++++++
 rules/host-openocd.make                            |  76 ++++++++
 rules/openocd.in                                   | 199 +++++++++++++++++++++
 rules/openocd.make                                 |  96 ++++++++++
 7 files changed, 627 insertions(+)
 create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
 create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
 create mode 100644 patches/openocd-0.8.0/series
 create mode 100644 rules/host-openocd.in
 create mode 100644 rules/host-openocd.make
 create mode 100644 rules/openocd.in
 create mode 100644 rules/openocd.make

diff --git a/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
new file mode 100644
index 0000000..a7c65b7
--- /dev/null
+++ b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
@@ -0,0 +1,33 @@
+From 930e41a2921b8c2905690153514099c8abf05828 Mon Sep 17 00:00:00 2001
+From: Paul Fertser <fercerpav@gmail.com>
+Date: Sat, 31 May 2014 08:19:51 +0400
+Subject: [PATCH] configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
+
+Blaster II should depend on the corresponding symbol, not on libusb-1
+presence.
+
+Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
+Signed-off-by: Paul Fertser <fercerpav@gmail.com>
+Reviewed-on: http://openocd.zylin.com/2159
+Tested-by: jenkins
+Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 1b4870e..9943beb 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1174,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
+ AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+ AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
+ AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
+-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes])
++AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
+ AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
+ AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
+ AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
+-- 
+2.1.0
+
diff --git a/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
new file mode 100644
index 0000000..e8c4957
--- /dev/null
+++ b/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
@@ -0,0 +1,20 @@
+merge in changes to configure.ac introduced by
+	0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
+into "configure"
+---
+ configure |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: b/configure
+===================================================================
+--- a/configure
++++ b/configure
+@@ -15806,7 +15806,7 @@
+   JTAG_VPI_FALSE=
+ fi
+ 
+- if test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes; then
++ if test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no; then
+   USB_BLASTER_DRIVER_TRUE=
+   USB_BLASTER_DRIVER_FALSE='#'
+ else
diff --git a/patches/openocd-0.8.0/series b/patches/openocd-0.8.0/series
new file mode 100644
index 0000000..1860de5
--- /dev/null
+++ b/patches/openocd-0.8.0/series
@@ -0,0 +1,4 @@
+# keep 0001 disabled, as changing configure.ac will trigger autotools
+# invocation. The changes from 0001 are done by 0002 in "configure".
+# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
+0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
diff --git a/rules/host-openocd.in b/rules/host-openocd.in
new file mode 100644
index 0000000..d8c4e7e
--- /dev/null
+++ b/rules/host-openocd.in
@@ -0,0 +1,199 @@
+## SECTION=hosttools
+
+menuconfig HOST_OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
+	# libusb-0.1 ; no HOST_LIBUSB_COMPAT, so select HOST_LIBUSB and hope for the best
+	select HOST_LIBUSB	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
+	# libhidapi ; currently no package in ptxdist, so disable it
+	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
+	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
+	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if HOST_OPENOCD
+
+# ===== interface drivers =====
+
+config HOST_OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config HOST_OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config HOST_OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config HOST_OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config HOST_OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config HOST_OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config HOST_OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config HOST_OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config HOST_OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config HOST_OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config HOST_OPENOCD_VSLLINK
+	bool
+	prompt "Versaloon-Link JTAG Programmer"
+
+config HOST_OPENOCD_USBPROG
+	bool
+	prompt "USBProg JTAG Programmer"
+
+config HOST_OPENOCD_RLINK
+	bool
+	prompt "Raisonance RLink JTAG Programmer"
+
+config HOST_OPENOCD_ARMJTAGEW
+	bool
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+# currently no package in ptxdist, so disable it
+#config HOST_OPENOCD_CMSIS_DAP
+#	bool
+#	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config HOST_OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if HOST_OPENOCD_PARPORT
+	config HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config HOST_OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on HOST_OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config HOST_OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config HOST_OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+# no ftd2xx package in ptxdist, so disable it
+#config HOST_OPENOCD_USB_BLASTER_FTD2XX
+#	bool
+#	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config HOST_OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config HOST_OPENOCD_ZY1000
+	bool
+	prompt "ZY1000 interface"
+
+if HOST_OPENOCD_ZY1000
+	config HOST_OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config HOST_OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config HOST_OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config HOST_OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config HOST_OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config HOST_OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config HOST_OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+# no ftd2xx package in ptxdist, so disable it
+#config HOST_OPENOCD_PRESTO_FTD2XX
+#	bool
+#	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+# no ftd2xx package in ptxdist, so disable it
+#config HOST_OPENOCD_OPENJTAG_FTD2XX
+#	bool
+#	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config HOST_OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config HOST_OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config HOST_OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config HOST_OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config HOST_OPENOCD_MINIDRIVER_DUMMY
+	bool
+	prompt "dummy minidriver"
+
+config HOST_OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/host-openocd.make b/rules/host-openocd.make
new file mode 100644
index 0000000..913c761
--- /dev/null
+++ b/rules/host-openocd.make
@@ -0,0 +1,76 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
+
+#
+# Paths and names
+#
+HOST_OPENOCD_VERSION	:= 0.8.0
+HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
+HOST_OPENOCD_SUFFIX	:= tar.bz2
+HOST_OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(HOST_OPENOCD_VERSION)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
+#HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
+HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
+HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+HOST_OPENOCD_LICENSE	:= LGPLv2, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+HOST_OPENOCD_CONF_TOOL	:= autoconf
+HOST_OPENOCD_CONF_OPT	:= $(HOST_AUTOCONF) \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_REMOTE_BITBANG)-remote-bitbang \
+
+
+# vim: syntax=make
diff --git a/rules/openocd.in b/rules/openocd.in
new file mode 100644
index 0000000..56384e7
--- /dev/null
+++ b/rules/openocd.in
@@ -0,0 +1,199 @@
+## SECTION=debug_tools
+
+menuconfig OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select LIBUSB	if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select LIBUSB	if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
+	# libusb-0.1
+	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW
+	# libhidapi ; currently no package in ptxdist, so disable it
+	#select HIDAPI	if OPENOCD_CMSIS_DAP
+	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
+	#select LIBFTDI1	if OPENOCD_USB_BLASTER_LIBFTDI || OPENOCD_PRESTO_LIBFTDI || OPENOCD_OPENJTAG_FTDI
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if OPENOCD
+
+# ===== interface drivers =====
+
+config OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config OPENOCD_VSLLINK
+	bool
+	prompt "Versaloon-Link JTAG Programmer"
+
+config OPENOCD_USBPROG
+	bool
+	prompt "USBProg JTAG Programmer"
+
+config OPENOCD_RLINK
+	bool
+	prompt "Raisonance RLink JTAG Programmer"
+
+config OPENOCD_ARMJTAGEW
+	bool
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+# currently no package in ptxdist, so disable it
+#config OPENOCD_CMSIS_DAP
+#	bool
+#	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if OPENOCD_PARPORT
+	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+# no ftd2xx package in ptxdist, so disable it
+#config OPENOCD_USB_BLASTER_FTD2XX
+#	bool
+#	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config OPENOCD_ZY1000
+	bool
+	prompt "ZY1000 interface"
+
+if OPENOCD_ZY1000
+	config OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+# no ftd2xx package in ptxdist, so disable it
+#config OPENOCD_PRESTO_FTD2XX
+#	bool
+#	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+# no ftd2xx package in ptxdist, so disable it
+#config OPENOCD_OPENJTAG_FTD2XX
+#	bool
+#	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config OPENOCD_MINIDRIVER_DUMMY
+	bool
+	prompt "dummy minidriver"
+
+config OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/openocd.make b/rules/openocd.make
new file mode 100644
index 0000000..8301df3
--- /dev/null
+++ b/rules/openocd.make
@@ -0,0 +1,96 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_OPENOCD) += openocd
+
+#
+# Paths and names
+#
+OPENOCD_VERSION	:= 0.8.0
+OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+OPENOCD		:= openocd-$(OPENOCD_VERSION)
+OPENOCD_SUFFIX	:= tar.bz2
+OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)/$(OPENOCD).$(OPENOCD_SUFFIX)
+#OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
+OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
+OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+OPENOCD_LICENSE	:= LGPLv2, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+OPENOCD_CONF_TOOL	:= autoconf
+OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
+	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/openocd.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, openocd)
+	@$(call install_fixup, openocd,PRIORITY,optional)
+	@$(call install_fixup, openocd,SECTION,base)
+	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
+	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
+
+	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
+#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
+
+	@$(call install_finish, openocd)
+
+	@$(call touch)
+
+
+# vim: syntax=make
-- 
2.1.0


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1854 bytes --]

On 09/29/2014 07:12 PM, Andreas Pretzsch wrote:
> Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> ---
>  ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
>  ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  20 +++
>  patches/openocd-0.8.0/series                       |   4 +
>  rules/host-openocd.in                              | 199 +++++++++++++++++++++
>  rules/host-openocd.make                            |  76 ++++++++
>  rules/openocd.in                                   | 199 +++++++++++++++++++++
>  rules/openocd.make                                 |  96 ++++++++++
>  7 files changed, 627 insertions(+)
>  create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/series
>  create mode 100644 rules/host-openocd.in
>  create mode 100644 rules/host-openocd.make
>  create mode 100644 rules/openocd.in
>  create mode 100644 rules/openocd.make
> 
[...]

> --- /dev/null
> +++ b/patches/openocd-0.8.0/series
> @@ -0,0 +1,4 @@
> +# keep 0001 disabled, as changing configure.ac will trigger autotools
> +# invocation. The changes from 0001 are done by 0002 in "configure".
> +# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> +0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch

Please drop patch 2, activate patch 1 and create a link to ../autgen.sh
in patches/openocd-0.8.0

regards,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[-- Attachment #2: Type: text/plain, Size: 48 bytes --]

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Andreas Pretzsch]

A few comments on this, both generic here and specific inline (sorry for
full quote, more readable in this case).

First, as combined patch host+target due to the shared patches.

Second, the options mimic the ./configure options from OpenOCD, not only
in wording, but also in sequence. To ease maintenance, I refrained
reordering them.


On Mo, 2014-09-29 at 19:12 +0200, Andreas Pretzsch wrote:
> Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> ---
>  ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
>  ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  20 +++
>  patches/openocd-0.8.0/series                       |   4 +
>  rules/host-openocd.in                              | 199 +++++++++++++++++++++
>  rules/host-openocd.make                            |  76 ++++++++
>  rules/openocd.in                                   | 199 +++++++++++++++++++++
>  rules/openocd.make                                 |  96 ++++++++++
>  7 files changed, 627 insertions(+)
>  create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/series
>  create mode 100644 rules/host-openocd.in
>  create mode 100644 rules/host-openocd.make
>  create mode 100644 rules/openocd.in
>  create mode 100644 rules/openocd.make
> 
> diff --git a/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> new file mode 100644
> index 0000000..a7c65b7
> --- /dev/null
> +++ b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> @@ -0,0 +1,33 @@
> +From 930e41a2921b8c2905690153514099c8abf05828 Mon Sep 17 00:00:00 2001
> +From: Paul Fertser <fercerpav@gmail.com>
> +Date: Sat, 31 May 2014 08:19:51 +0400
> +Subject: [PATCH] configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
> +
> +Blaster II should depend on the corresponding symbol, not on libusb-1
> +presence.
> +
> +Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
> +Signed-off-by: Paul Fertser <fercerpav@gmail.com>
> +Reviewed-on: http://openocd.zylin.com/2159
> +Tested-by: jenkins
> +Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
> +---
> + configure.ac | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 1b4870e..9943beb 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -1174,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
> + AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
> + AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
> + AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
> +-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes])
> ++AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
> + AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
> + AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
> + AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
> +-- 
> +2.1.0
> +
> diff --git a/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> new file mode 100644
> index 0000000..e8c4957
> --- /dev/null
> +++ b/patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> @@ -0,0 +1,20 @@
> +merge in changes to configure.ac introduced by
> +	0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> +into "configure"
> +---
> + configure |    2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +Index: b/configure
> +===================================================================
> +--- a/configure
> ++++ b/configure
> +@@ -15806,7 +15806,7 @@
> +   JTAG_VPI_FALSE=
> + fi
> + 
> +- if test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes; then
> ++ if test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no; then
> +   USB_BLASTER_DRIVER_TRUE=
> +   USB_BLASTER_DRIVER_FALSE='#'
> + else
> diff --git a/patches/openocd-0.8.0/series b/patches/openocd-0.8.0/series
> new file mode 100644
> index 0000000..1860de5
> --- /dev/null
> +++ b/patches/openocd-0.8.0/series
> @@ -0,0 +1,4 @@
> +# keep 0001 disabled, as changing configure.ac will trigger autotools
> +# invocation. The changes from 0001 are done by 0002 in "configure".
> +# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> +0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> diff --git a/rules/host-openocd.in b/rules/host-openocd.in
> new file mode 100644
> index 0000000..d8c4e7e
> --- /dev/null
> +++ b/rules/host-openocd.in
> @@ -0,0 +1,199 @@
> +## SECTION=hosttools
> +
> +menuconfig HOST_OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
> +	# libusb-0.1 ; no HOST_LIBUSB_COMPAT, so select HOST_LIBUSB and hope for the best
> +	select HOST_LIBUSB	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
> +	# libhidapi ; currently no package in ptxdist, so disable it
> +	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
> +	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
> +	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI

Both not perfect, but matches the current state. So I kept them given
the situation changes some day.

> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.
> +
> +if HOST_OPENOCD
> +
> +# ===== interface drivers =====
> +
> +config HOST_OPENOCD_DUMMY
> +	bool
> +	prompt "dummy port driver"
> +
> +# --- libusb-1.x based
> +
> +config HOST_OPENOCD_FTDI
> +	bool
> +	prompt "MPSSE mode of FTDI based devices"
> +
> +config HOST_OPENOCD_STLINK
> +	bool
> +	prompt "ST-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_TI_ICDI
> +	bool
> +	prompt "TI ICDI JTAG Programmer"
> +
> +config HOST_OPENOCD_ULINK
> +	bool
> +	prompt "Keil ULINK JTAG Programmer"
> +
> +config HOST_OPENOCD_USB_BLASTER_2
> +	bool
> +	prompt "Altera USB-Blaster II Compatible"
> +
> +# --- libusb-1.x or libusb-0.1 based
> +
> +config HOST_OPENOCD_JLINK
> +	bool
> +	prompt "Segger J-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_OSBDM
> +	bool
> +	prompt "OSBDM (JTAG only) Programmer"
> +
> +config HOST_OPENOCD_OPENDOUS
> +	bool
> +	prompt "eStick/opendous JTAG Programmer"
> +
> +config HOST_OPENOCD_AICE
> +	bool
> +	prompt "Andes JTAG Programmer"
> +
> +# --- libusb-0.1 based
> +
> +config HOST_OPENOCD_VSLLINK
> +	bool
> +	prompt "Versaloon-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_USBPROG
> +	bool
> +	prompt "USBProg JTAG Programmer"
> +
> +config HOST_OPENOCD_RLINK
> +	bool
> +	prompt "Raisonance RLink JTAG Programmer"
> +
> +config HOST_OPENOCD_ARMJTAGEW
> +	bool
> +	prompt "Olimex ARM-JTAG-EW Programmer"
> +
> +# --- hidapi based
> +# currently no package in ptxdist, so disable it
> +#config HOST_OPENOCD_CMSIS_DAP
> +#	bool
> +#	prompt "CMSIS-DAP Compliant Debugger"

same as above

> +
> +# --- various
> +
> +config HOST_OPENOCD_PARPORT
> +	bool
> +	prompt "pc parallel port driver"
> +
> +if HOST_OPENOCD_PARPORT
> +	config HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
> +		bool
> +		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
> +
> +	config HOST_OPENOCD_PARPORT_GIVEIO
> +		bool
> +		depends on HOST_OPENOCD_PARPORT
> +		prompt "Enable use of giveio (CygWin only)"
> +endif
> +
> +config HOST_OPENOCD_JTAG_VPI
> +	bool
> +	prompt "JTAG VPI"
> +
> +config HOST_OPENOCD_USB_BLASTER_LIBFTDI
> +	bool
> +	prompt "Altera USB-Blaster (libftdi driver, opensource)"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config HOST_OPENOCD_USB_BLASTER_FTD2XX
> +#	bool
> +#	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"

same as above

> +
> +config HOST_OPENOCD_AMTJTAGACCEL
> +	bool
> +	prompt "Amontec JTAG-Accelerator driver"
> +
> +config HOST_OPENOCD_ZY1000
> +	bool
> +	prompt "ZY1000 interface"
> +
> +if HOST_OPENOCD_ZY1000
> +	config HOST_OPENOCD_ZY1000_MASTER
> +		bool
> +		prompt "Use ZY1000 JTAG master registers"
> +endif
> +
> +config HOST_OPENOCD_IOUTIL
> +	bool
> +	prompt "ioutil functions - for standalone OpenOCD implementations"
> +
> +config HOST_OPENOCD_EP93XX
> +	bool
> +	prompt "EP93xx based SBCs"
> +
> +config HOST_OPENOCD_AT91RM9200
> +	bool
> +	prompt "AT91RM9200 based SBCs"
> +
> +config HOST_OPENOCD_BCM2835GPIO
> +	bool
> +	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
> +
> +config HOST_OPENOCD_GW16012
> +	bool
> +	prompt "Gateworks GW16012 JTAG Programmer"
> +
> +config HOST_OPENOCD_PRESTO_LIBFTDI
> +	bool
> +	prompt "ASIX Presto Programmer using the libftdi driver"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config HOST_OPENOCD_PRESTO_FTD2XX
> +#	bool
> +#	prompt "ASIX Presto Programmer using the FTD2XX driver"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config HOST_OPENOCD_OPENJTAG_FTD2XX
> +#	bool
> +#	prompt "OpenJTAG Programmer with ftd2xx driver"

same as above

> +
> +config HOST_OPENOCD_OPENJTAG_FTDI
> +	bool
> +	prompt "OpenJTAG Programmer with ftdi driver"
> +
> +config HOST_OPENOCD_OOCD_TRACE
> +	bool
> +	prompt "prototype OpenOCD+trace ETM capture hardware"
> +
> +config HOST_OPENOCD_BUSPIRATE
> +	bool
> +	prompt "Buspirate"
> +
> +config HOST_OPENOCD_SYSFSGPIO
> +	bool
> +	prompt "programming driven via sysfs gpios"
> +
> +config HOST_OPENOCD_MINIDRIVER_DUMMY
> +	bool
> +	prompt "dummy minidriver"
> +
> +config HOST_OPENOCD_REMOTE_BITBANG
> +	bool
> +	prompt "Remote Bitbang jtag driver"
> +
> +endif
> diff --git a/rules/host-openocd.make b/rules/host-openocd.make
> new file mode 100644
> index 0000000..913c761
> --- /dev/null
> +++ b/rules/host-openocd.make
> @@ -0,0 +1,76 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
> +
> +#
> +# Paths and names
> +#
> +HOST_OPENOCD_VERSION	:= 0.8.0
> +HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
> +HOST_OPENOCD_SUFFIX	:= tar.bz2
> +HOST_OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(HOST_OPENOCD_VERSION)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> +#HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))

Took this mirror from Michael Grzeschik original patch, but still refer
to the official source. Please change before apply at your own
discretion.

> +HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> +HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +HOST_OPENOCD_LICENSE	:= LGPLv2, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +HOST_OPENOCD_CONF_TOOL	:= autoconf
> +HOST_OPENOCD_CONF_OPT	:= $(HOST_AUTOCONF) \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_DUMMY)-dummy \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_FTDI)-ftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_STLINK)-stlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_TI_ICDI)-ti-icdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ULINK)-ulink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JLINK)-jlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OSBDM)-osbdm \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENDOUS)-opendous \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AICE)-aice \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_VSLLINK)-vsllink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USBPROG)-usbprog \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_RLINK)-rlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ARMJTAGEW)-armjtagew \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_CMSIS_DAP)-cmsis-dap \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT)-parport \
> +	--$(call ptx/disen, PTXCONF_HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JTAG_VPI)-jtag_vpi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000)-zy1000 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000_MASTER)-zy1000-master \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_IOUTIL)-ioutil \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_EP93XX)-ep93xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AT91RM9200)-at91rm9200 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BCM2835GPIO)-bcm2835gpio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_GW16012)-gw16012 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OOCD_TRACE)-oocd_trace \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BUSPIRATE)-buspirate \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_SYSFSGPIO)-sysfsgpio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_REMOTE_BITBANG)-remote-bitbang \
> +
> +
> +# vim: syntax=make
> diff --git a/rules/openocd.in b/rules/openocd.in
> new file mode 100644
> index 0000000..56384e7
> --- /dev/null
> +++ b/rules/openocd.in
> @@ -0,0 +1,199 @@
> +## SECTION=debug_tools
> +
> +menuconfig OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select LIBUSB	if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select LIBUSB	if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
> +	# libusb-0.1
> +	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW
> +	# libhidapi ; currently no package in ptxdist, so disable it
> +	#select HIDAPI	if OPENOCD_CMSIS_DAP
> +	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
> +	#select LIBFTDI1	if OPENOCD_USB_BLASTER_LIBFTDI || OPENOCD_PRESTO_LIBFTDI || OPENOCD_OPENJTAG_FTDI

same as with host package, beside libusb_compat, which is there as
target package.

> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.
> +
> +if OPENOCD
> +
> +# ===== interface drivers =====
> +
> +config OPENOCD_DUMMY
> +	bool
> +	prompt "dummy port driver"
> +
> +# --- libusb-1.x based
> +
> +config OPENOCD_FTDI
> +	bool
> +	prompt "MPSSE mode of FTDI based devices"
> +
> +config OPENOCD_STLINK
> +	bool
> +	prompt "ST-Link JTAG Programmer"
> +
> +config OPENOCD_TI_ICDI
> +	bool
> +	prompt "TI ICDI JTAG Programmer"
> +
> +config OPENOCD_ULINK
> +	bool
> +	prompt "Keil ULINK JTAG Programmer"
> +
> +config OPENOCD_USB_BLASTER_2
> +	bool
> +	prompt "Altera USB-Blaster II Compatible"
> +
> +# --- libusb-1.x or libusb-0.1 based
> +
> +config OPENOCD_JLINK
> +	bool
> +	prompt "Segger J-Link JTAG Programmer"
> +
> +config OPENOCD_OSBDM
> +	bool
> +	prompt "OSBDM (JTAG only) Programmer"
> +
> +config OPENOCD_OPENDOUS
> +	bool
> +	prompt "eStick/opendous JTAG Programmer"
> +
> +config OPENOCD_AICE
> +	bool
> +	prompt "Andes JTAG Programmer"
> +
> +# --- libusb-0.1 based
> +
> +config OPENOCD_VSLLINK
> +	bool
> +	prompt "Versaloon-Link JTAG Programmer"
> +
> +config OPENOCD_USBPROG
> +	bool
> +	prompt "USBProg JTAG Programmer"
> +
> +config OPENOCD_RLINK
> +	bool
> +	prompt "Raisonance RLink JTAG Programmer"
> +
> +config OPENOCD_ARMJTAGEW
> +	bool
> +	prompt "Olimex ARM-JTAG-EW Programmer"
> +
> +# --- hidapi based
> +# currently no package in ptxdist, so disable it
> +#config OPENOCD_CMSIS_DAP
> +#	bool
> +#	prompt "CMSIS-DAP Compliant Debugger"
> +
> +# --- various
> +
> +config OPENOCD_PARPORT
> +	bool
> +	prompt "pc parallel port driver"
> +
> +if OPENOCD_PARPORT
> +	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
> +		bool
> +		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
> +
> +	config OPENOCD_PARPORT_GIVEIO
> +		bool
> +		depends on OPENOCD_PARPORT
> +		prompt "Enable use of giveio (CygWin only)"
> +endif
> +
> +config OPENOCD_JTAG_VPI
> +	bool
> +	prompt "JTAG VPI"
> +
> +config OPENOCD_USB_BLASTER_LIBFTDI
> +	bool
> +	prompt "Altera USB-Blaster (libftdi driver, opensource)"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_USB_BLASTER_FTD2XX
> +#	bool
> +#	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
> +
> +config OPENOCD_AMTJTAGACCEL
> +	bool
> +	prompt "Amontec JTAG-Accelerator driver"
> +
> +config OPENOCD_ZY1000
> +	bool
> +	prompt "ZY1000 interface"
> +
> +if OPENOCD_ZY1000
> +	config OPENOCD_ZY1000_MASTER
> +		bool
> +		prompt "Use ZY1000 JTAG master registers"
> +endif
> +
> +config OPENOCD_IOUTIL
> +	bool
> +	prompt "ioutil functions - for standalone OpenOCD implementations"
> +
> +config OPENOCD_EP93XX
> +	bool
> +	prompt "EP93xx based SBCs"
> +
> +config OPENOCD_AT91RM9200
> +	bool
> +	prompt "AT91RM9200 based SBCs"
> +
> +config OPENOCD_BCM2835GPIO
> +	bool
> +	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
> +
> +config OPENOCD_GW16012
> +	bool
> +	prompt "Gateworks GW16012 JTAG Programmer"
> +
> +config OPENOCD_PRESTO_LIBFTDI
> +	bool
> +	prompt "ASIX Presto Programmer using the libftdi driver"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_PRESTO_FTD2XX
> +#	bool
> +#	prompt "ASIX Presto Programmer using the FTD2XX driver"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_OPENJTAG_FTD2XX
> +#	bool
> +#	prompt "OpenJTAG Programmer with ftd2xx driver"
> +
> +config OPENOCD_OPENJTAG_FTDI
> +	bool
> +	prompt "OpenJTAG Programmer with ftdi driver"
> +
> +config OPENOCD_OOCD_TRACE
> +	bool
> +	prompt "prototype OpenOCD+trace ETM capture hardware"
> +
> +config OPENOCD_BUSPIRATE
> +	bool
> +	prompt "Buspirate"
> +
> +config OPENOCD_SYSFSGPIO
> +	bool
> +	prompt "programming driven via sysfs gpios"
> +
> +config OPENOCD_MINIDRIVER_DUMMY
> +	bool
> +	prompt "dummy minidriver"
> +
> +config OPENOCD_REMOTE_BITBANG
> +	bool
> +	prompt "Remote Bitbang jtag driver"
> +
> +endif
> diff --git a/rules/openocd.make b/rules/openocd.make
> new file mode 100644
> index 0000000..8301df3
> --- /dev/null
> +++ b/rules/openocd.make
> @@ -0,0 +1,96 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_OPENOCD) += openocd
> +
> +#
> +# Paths and names
> +#
> +OPENOCD_VERSION	:= 0.8.0
> +OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +OPENOCD		:= openocd-$(OPENOCD_VERSION)
> +OPENOCD_SUFFIX	:= tar.bz2
> +OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +#OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))

same as with host package

> +OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +OPENOCD_LICENSE	:= LGPLv2, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +OPENOCD_CONF_TOOL	:= autoconf
> +OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
> +	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/openocd.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, openocd)
> +	@$(call install_fixup, openocd,PRIORITY,optional)
> +	@$(call install_fixup, openocd,SECTION,base)
> +	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
> +	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
> +
> +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)

Intentionally disabled. 700kB generic extra data on the target makes no
sense. I doubt there won't be one real use case where the makefile is
not pulled into platform local rules and adapted to copy only the 5
relevant files from this tree. So this is more of a reminder where to
look, so I kept is as comment.

> +
> +	@$(call install_finish, openocd)
> +
> +	@$(call touch)
> +
> +
> +# vim: syntax=make
> -- 
> 2.1.0
> 
> 


-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Andreas Pretzsch]

On Mo, 2014-09-29 at 19:27 +0200, Marc Kleine-Budde wrote:
> > --- /dev/null
> > +++ b/patches/openocd-0.8.0/series
> > @@ -0,0 +1,4 @@
> > +# keep 0001 disabled, as changing configure.ac will trigger autotools
> > +# invocation. The changes from 0001 are done by 0002 in "configure".
> > +# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> > +0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> 
> Please drop patch 2, activate patch 1 and create a link to ../autgen.sh
> in patches/openocd-0.8.0

Ok, will do in a v2 of the patch. Suppose this is the preferred way and
I can omit any extra "select autotools" dependency in the package ?

Regarding v2, waiting for comments (mirror, maybe other points)
regarding the rest of the patch.

Thanks,
  Andreas

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Michael Olbrich]

On Mon, Sep 29, 2014 at 07:50:44PM +0200, Andreas Pretzsch wrote:
> On Mo, 2014-09-29 at 19:27 +0200, Marc Kleine-Budde wrote:
> > > --- /dev/null
> > > +++ b/patches/openocd-0.8.0/series
> > > @@ -0,0 +1,4 @@
> > > +# keep 0001 disabled, as changing configure.ac will trigger autotools
> > > +# invocation. The changes from 0001 are done by 0002 in "configure".
> > > +# 0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> > > +0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> > 
> > Please drop patch 2, activate patch 1 and create a link to ../autgen.sh
> > in patches/openocd-0.8.0
> 
> Ok, will do in a v2 of the patch. Suppose this is the preferred way and
> I can omit any extra "select autotools" dependency in the package ?

PTXdist will do the right thing, when autgen.sh exists and build all
autotools.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Michael Olbrich]

On Mon, Sep 29, 2014 at 07:12:11PM +0200, Andreas Pretzsch wrote:
> Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> ---
>  ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
>  ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  20 +++
>  patches/openocd-0.8.0/series                       |   4 +
>  rules/host-openocd.in                              | 199 +++++++++++++++++++++
>  rules/host-openocd.make                            |  76 ++++++++
>  rules/openocd.in                                   | 199 +++++++++++++++++++++
>  rules/openocd.make                                 |  96 ++++++++++
>  7 files changed, 627 insertions(+)
>  create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 100644 patches/openocd-0.8.0/series
>  create mode 100644 rules/host-openocd.in
>  create mode 100644 rules/host-openocd.make
>  create mode 100644 rules/openocd.in
>  create mode 100644 rules/openocd.make
> 
[...]
> diff --git a/rules/host-openocd.in b/rules/host-openocd.in
> new file mode 100644
> index 0000000..d8c4e7e
> --- /dev/null
> +++ b/rules/host-openocd.in
> @@ -0,0 +1,199 @@
> +## SECTION=hosttools
> +
> +menuconfig HOST_OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
> +	# libusb-0.1 ; no HOST_LIBUSB_COMPAT, so select HOST_LIBUSB and hope for the best
> +	select HOST_LIBUSB	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
> +	# libhidapi ; currently no package in ptxdist, so disable it
> +	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
> +	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
> +	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI
> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.

I think we should drop host-openocd for now. I'm not familiar OpenOCD but
unless you need exactly the same version on the PC and the Target, I think
we can let the Desktop Linux Distribution provide it.

[...]
> diff --git a/rules/openocd.in b/rules/openocd.in
> new file mode 100644
> index 0000000..56384e7
> --- /dev/null
> +++ b/rules/openocd.in
> @@ -0,0 +1,199 @@
> +## SECTION=debug_tools
> +
> +menuconfig OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select LIBUSB	if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select LIBUSB	if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
> +	# libusb-0.1
> +	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW

> +	# libhidapi ; currently no package in ptxdist, so disable it
> +	#select HIDAPI	if OPENOCD_CMSIS_DAP
> +	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
> +	#select LIBFTDI1	if OPENOCD_USB_BLASTER_LIBFTDI || OPENOCD_PRESTO_LIBFTDI || OPENOCD_OPENJTAG_FTDI

drop this here.

> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.
> +
> +if OPENOCD
> +
> +# ===== interface drivers =====
> +
> +config OPENOCD_DUMMY
> +	bool
> +	prompt "dummy port driver"
> +
> +# --- libusb-1.x based
> +
> +config OPENOCD_FTDI
> +	bool
> +	prompt "MPSSE mode of FTDI based devices"
> +
> +config OPENOCD_STLINK
> +	bool
> +	prompt "ST-Link JTAG Programmer"
> +
> +config OPENOCD_TI_ICDI
> +	bool
> +	prompt "TI ICDI JTAG Programmer"
> +
> +config OPENOCD_ULINK
> +	bool
> +	prompt "Keil ULINK JTAG Programmer"
> +
> +config OPENOCD_USB_BLASTER_2
> +	bool
> +	prompt "Altera USB-Blaster II Compatible"
> +
> +# --- libusb-1.x or libusb-0.1 based
> +
> +config OPENOCD_JLINK
> +	bool
> +	prompt "Segger J-Link JTAG Programmer"
> +
> +config OPENOCD_OSBDM
> +	bool
> +	prompt "OSBDM (JTAG only) Programmer"
> +
> +config OPENOCD_OPENDOUS
> +	bool
> +	prompt "eStick/opendous JTAG Programmer"
> +
> +config OPENOCD_AICE
> +	bool
> +	prompt "Andes JTAG Programmer"
> +
> +# --- libusb-0.1 based
> +
> +config OPENOCD_VSLLINK
> +	bool
> +	prompt "Versaloon-Link JTAG Programmer"
> +
> +config OPENOCD_USBPROG
> +	bool
> +	prompt "USBProg JTAG Programmer"
> +
> +config OPENOCD_RLINK
> +	bool
> +	prompt "Raisonance RLink JTAG Programmer"
> +
> +config OPENOCD_ARMJTAGEW
> +	bool
> +	prompt "Olimex ARM-JTAG-EW Programmer"
> +
> +# --- hidapi based
> +# currently no package in ptxdist, so disable it
> +#config OPENOCD_CMSIS_DAP
> +#	bool
> +#	prompt "CMSIS-DAP Compliant Debugger"

make a normal option but add:
	# needs libhidapi
	depends on BROKEN

> +
> +# --- various
> +
> +config OPENOCD_PARPORT
> +	bool
> +	prompt "pc parallel port driver"
> +
> +if OPENOCD_PARPORT
> +	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
> +		bool
> +		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
> +
> +	config OPENOCD_PARPORT_GIVEIO
> +		bool
> +		depends on OPENOCD_PARPORT
> +		prompt "Enable use of giveio (CygWin only)"
> +endif
> +
> +config OPENOCD_JTAG_VPI
> +	bool
> +	prompt "JTAG VPI"
> +
> +config OPENOCD_USB_BLASTER_LIBFTDI
> +	bool
> +	prompt "Altera USB-Blaster (libftdi driver, opensource)"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_USB_BLASTER_FTD2XX
> +#	bool
> +#	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
> +
> +config OPENOCD_AMTJTAGACCEL
> +	bool
> +	prompt "Amontec JTAG-Accelerator driver"
> +
> +config OPENOCD_ZY1000
> +	bool
> +	prompt "ZY1000 interface"
> +
> +if OPENOCD_ZY1000
> +	config OPENOCD_ZY1000_MASTER
> +		bool
> +		prompt "Use ZY1000 JTAG master registers"
> +endif
> +
> +config OPENOCD_IOUTIL
> +	bool
> +	prompt "ioutil functions - for standalone OpenOCD implementations"
> +
> +config OPENOCD_EP93XX
> +	bool
> +	prompt "EP93xx based SBCs"
> +
> +config OPENOCD_AT91RM9200
> +	bool
> +	prompt "AT91RM9200 based SBCs"
> +
> +config OPENOCD_BCM2835GPIO
> +	bool
> +	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
> +
> +config OPENOCD_GW16012
> +	bool
> +	prompt "Gateworks GW16012 JTAG Programmer"
> +
> +config OPENOCD_PRESTO_LIBFTDI
> +	bool
> +	prompt "ASIX Presto Programmer using the libftdi driver"
> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_PRESTO_FTD2XX
> +#	bool
> +#	prompt "ASIX Presto Programmer using the FTD2XX driver"

same here

> +
> +# no ftd2xx package in ptxdist, so disable it
> +#config OPENOCD_OPENJTAG_FTD2XX
> +#	bool
> +#	prompt "OpenJTAG Programmer with ftd2xx driver"

and here

> +
> +config OPENOCD_OPENJTAG_FTDI
> +	bool
> +	prompt "OpenJTAG Programmer with ftdi driver"
> +
> +config OPENOCD_OOCD_TRACE
> +	bool
> +	prompt "prototype OpenOCD+trace ETM capture hardware"
> +
> +config OPENOCD_BUSPIRATE
> +	bool
> +	prompt "Buspirate"
> +
> +config OPENOCD_SYSFSGPIO
> +	bool
> +	prompt "programming driven via sysfs gpios"
> +
> +config OPENOCD_MINIDRIVER_DUMMY
> +	bool
> +	prompt "dummy minidriver"
> +
> +config OPENOCD_REMOTE_BITBANG
> +	bool
> +	prompt "Remote Bitbang jtag driver"
> +
> +endif
> diff --git a/rules/openocd.make b/rules/openocd.make
> new file mode 100644
> index 0000000..8301df3
> --- /dev/null
> +++ b/rules/openocd.make
> @@ -0,0 +1,96 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_OPENOCD) += openocd
> +
> +#
> +# Paths and names
> +#
> +OPENOCD_VERSION	:= 0.8.0
> +OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +OPENOCD		:= openocd-$(OPENOCD_VERSION)
> +OPENOCD_SUFFIX	:= tar.bz2
> +OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +#OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
> +OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +OPENOCD_LICENSE	:= LGPLv2, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +OPENOCD_CONF_TOOL	:= autoconf
> +OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
> +	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/openocd.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, openocd)
> +	@$(call install_fixup, openocd,PRIORITY,optional)
> +	@$(call install_fixup, openocd,SECTION,base)
> +	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
> +	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
> +
> +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)

don't add comments like this either remove this or actually install any
useful files.

Michael

> +
> +	@$(call install_finish, openocd)
> +
> +	@$(call touch)
> +
> +
> +# vim: syntax=make
> -- 
> 2.1.0
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Michael Olbrich]

On Mon, Sep 29, 2014 at 07:43:36PM +0200, Andreas Pretzsch wrote:
> Second, the options mimic the ./configure options from OpenOCD, not only
> in wording, but also in sequence. To ease maintenance, I refrained
> reordering them.

Good, I prefer it that way.

[...]
> > +HOST_OPENOCD_VERSION	:= 0.8.0
> > +HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> > +HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
> > +HOST_OPENOCD_SUFFIX	:= tar.bz2
> > +HOST_OPENOCD_URL	:= http://downloads.sourceforge.net/project/openocd/openocd/$(HOST_OPENOCD_VERSION)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> > +#HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
> 
> Took this mirror from Michael Grzeschik original patch, but still refer
> to the official source. Please change before apply at your own
> discretion.

Please use the mirror URL. The default does the same things as your URL (SF
redirect it to a suitable mirror), but it makes it possible to overwrite
this with a specific mirror if there are problems with the default.

> > +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> > +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
> 
> Intentionally disabled. 700kB generic extra data on the target makes no
> sense. I doubt there won't be one real use case where the makefile is
> not pulled into platform local rules and adapted to copy only the 5
> relevant files from this tree. So this is more of a reminder where to
> look, so I kept is as comment.

I missed this when I commented the patch. Are there any files in
/usr/share/openocd/ that are required on the target?

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Andreas Pretzsch]

On Mi, 2014-10-01 at 12:29 +0200, Michael Olbrich wrote:
> On Mon, Sep 29, 2014 at 07:12:11PM +0200, Andreas Pretzsch wrote:
> > [host-openocd]
> 
> I think we should drop host-openocd for now. I'm not familiar OpenOCD but
> unless you need exactly the same version on the PC and the Target, I think
> we can let the Desktop Linux Distribution provide it.

We can drop the host package.
Host and target are independent and have different use cases.

Target can be used for ISP and debugging on the target of an additional
controller accessed by the main controller. Which is my use case here.

Host is a classical development debugging tool and either provided by
the host distri or local compiled by the developer anyway, often from
git. I just added it as Michael Grzeschik made a preliminary packet back
then, so there seems to be some use. And is was an easy by-product.

I'll split up the patch, in a target one (including openocd/patches) and
a host one. The target one should be merged, the host one is optional.
I'll just put the host one on the list, so anyone can pick it up again
later or use it locally, if they need it. And in this case, preserving
some comments ;-)


> [...]
> > diff --git a/rules/openocd.in b/rules/openocd.in
> [...]

Will work in your suggestions in v2.


> > +++ b/rules/openocd.make
> > [...]
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/openocd.targetinstall:
> > +	@$(call targetinfo)
> > +
> > +	@$(call install_init, openocd)
> > +	@$(call install_fixup, openocd,PRIORITY,optional)
> > +	@$(call install_fixup, openocd,SECTION,base)
> > +	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
> > +	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
> > +
> > +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> > +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
> 
> don't add comments like this either remove this or actually install any
> useful files.

From your other reply:
> > +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> > > +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
> > 
> > Intentionally disabled. 700kB generic extra data on the target makes no
> > sense. I doubt there won't be one real use case where the makefile is
> > not pulled into platform local rules and adapted to copy only the 5
> > relevant files from this tree. So this is more of a reminder where to
> > look, so I kept is as comment.
> 
> I missed this when I commented the patch. Are there any files in
> /usr/share/openocd/ that are required on the target?

Not strictly out from there.

Beside device-specific firmware and examples, it contains some 500
config files and tcl scripts. Core and SoC specific configs and setups,
interface (debug adapter) specific configs, RAM and flash layout
definitions, (eval) board init routines, some helpers, and so on. For
the myriad targets OpenOCD supports.

In practice on the target, one will use maybe 5 out of them, sometimes
even merged into one file, and also adapt it to the specific hardware.
So a mixture of a few selected ones plus maybe some not even in the
official package.

I see no sensible way for a preselection here, and in 99% of the cases,
it will be project specific. So no pre-install. But I like to keep the
comment for those who will adapt it to their needs, to ease things.

What I'll do in v2 is to switch from install_tree to
install_alternative_tree, missed that one. But still commented out.


-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target)

[Michael Olbrich]

On Wed, Oct 01, 2014 at 04:25:21PM +0200, Andreas Pretzsch wrote:
> > > +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
> > 
> > don't add comments like this either remove this or actually install any
> > useful files.
> 
> >From your other reply:
> > > +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> > > > +#	@$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/)
> > > 
> > > Intentionally disabled. 700kB generic extra data on the target makes no
> > > sense. I doubt there won't be one real use case where the makefile is
> > > not pulled into platform local rules and adapted to copy only the 5
> > > relevant files from this tree. So this is more of a reminder where to
> > > look, so I kept is as comment.
> > 
> > I missed this when I commented the patch. Are there any files in
> > /usr/share/openocd/ that are required on the target?
> 
> Not strictly out from there.
> 
> Beside device-specific firmware and examples, it contains some 500
> config files and tcl scripts. Core and SoC specific configs and setups,
> interface (debug adapter) specific configs, RAM and flash layout
> definitions, (eval) board init routines, some helpers, and so on. For
> the myriad targets OpenOCD supports.
> 
> In practice on the target, one will use maybe 5 out of them, sometimes
> even merged into one file, and also adapt it to the specific hardware.
> So a mixture of a few selected ones plus maybe some not even in the
> official package.
> 
> I see no sensible way for a preselection here, and in 99% of the cases,
> it will be project specific. So no pre-install. But I like to keep the
> comment for those who will adapt it to their needs, to ease things.
> 
> What I'll do in v2 is to switch from install_tree to
> install_alternative_tree, missed that one. But still commented out.

Use install_alternative_tree and add an option for it.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
---
 ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
 patches/openocd-0.8.0/autogen.sh                   |   1 +
 patches/openocd-0.8.0/series                       |   1 +
 rules/openocd.in                                   | 220 +++++++++++++++++++++
 rules/openocd.make                                 |  91 +++++++++
 5 files changed, 346 insertions(+)
 create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
 create mode 120000 patches/openocd-0.8.0/autogen.sh
 create mode 100644 patches/openocd-0.8.0/series
 create mode 100644 rules/openocd.in
 create mode 100644 rules/openocd.make

diff --git a/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
new file mode 100644
index 0000000..a7c65b7
--- /dev/null
+++ b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
@@ -0,0 +1,33 @@
+From 930e41a2921b8c2905690153514099c8abf05828 Mon Sep 17 00:00:00 2001
+From: Paul Fertser <fercerpav@gmail.com>
+Date: Sat, 31 May 2014 08:19:51 +0400
+Subject: [PATCH] configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
+
+Blaster II should depend on the corresponding symbol, not on libusb-1
+presence.
+
+Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
+Signed-off-by: Paul Fertser <fercerpav@gmail.com>
+Reviewed-on: http://openocd.zylin.com/2159
+Tested-by: jenkins
+Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 1b4870e..9943beb 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1174,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
+ AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+ AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
+ AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
+-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes])
++AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
+ AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
+ AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
+ AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
+-- 
+2.1.0
+
diff --git a/patches/openocd-0.8.0/autogen.sh b/patches/openocd-0.8.0/autogen.sh
new file mode 120000
index 0000000..9f8a4cb
--- /dev/null
+++ b/patches/openocd-0.8.0/autogen.sh
@@ -0,0 +1 @@
+../autogen.sh
\ No newline at end of file
diff --git a/patches/openocd-0.8.0/series b/patches/openocd-0.8.0/series
new file mode 100644
index 0000000..23230ef
--- /dev/null
+++ b/patches/openocd-0.8.0/series
@@ -0,0 +1 @@
+0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
diff --git a/rules/openocd.in b/rules/openocd.in
new file mode 100644
index 0000000..36194e9
--- /dev/null
+++ b/rules/openocd.in
@@ -0,0 +1,220 @@
+## SECTION=debug_tools
+
+menuconfig OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select LIBUSB	if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select LIBUSB	if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
+	# libusb-0.1
+	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if OPENOCD
+
+# ===== scripts directory =====
+
+config OPENOCD_SCRIPTDIR
+	string
+	default "/usr/share/openocd/scripts/"
+	prompt "OpenOCD script tree"
+	help
+	  OpenOCD relies on TCL scripts for core and SoC specific configs and
+	  setups, interface (debug adapter) specific configs, RAM and flash
+	  layout definitions, board init routines, helper routines, and so on.
+
+	  Keeping the default option of "/usr/share/openocd/scripts/" will
+	  install all of them (several 100kB) to the target, which is probably
+	  not what you want, as they are heavily target dependent.
+
+	  To install only a few required ones, create a tree in projectroot
+	  named like the tree configured, so only these will be installed.
+
+	  Clear this config option to omit script installation at all.
+
+
+# ===== interface drivers =====
+
+config OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config OPENOCD_VSLLINK
+	bool
+	prompt "Versaloon-Link JTAG Programmer"
+
+config OPENOCD_USBPROG
+	bool
+	prompt "USBProg JTAG Programmer"
+
+config OPENOCD_RLINK
+	bool
+	prompt "Raisonance RLink JTAG Programmer"
+
+config OPENOCD_ARMJTAGEW
+	bool
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+config OPENOCD_CMSIS_DAP
+	bool
+	# needs libhidapi
+	depends on BROKEN
+	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if OPENOCD_PARPORT
+	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+config OPENOCD_USB_BLASTER_FTD2XX
+	bool
+	# needs ftd2xx
+	depends on BROKEN
+	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config OPENOCD_ZY1000
+	bool
+	prompt "ZY1000 interface"
+
+if OPENOCD_ZY1000
+	config OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+config OPENOCD_PRESTO_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+config OPENOCD_OPENJTAG_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config OPENOCD_MINIDRIVER_DUMMY
+	bool
+	prompt "dummy minidriver"
+
+config OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/openocd.make b/rules/openocd.make
new file mode 100644
index 0000000..e5b9741
--- /dev/null
+++ b/rules/openocd.make
@@ -0,0 +1,91 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+PACKAGES-$(PTXCONF_OPENOCD) += openocd
+
+OPENOCD_VERSION	:= 0.8.0
+OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+OPENOCD		:= openocd-$(OPENOCD_VERSION)
+OPENOCD_SUFFIX	:= tar.bz2
+OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
+OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
+OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+OPENOCD_LICENSE	:= LGPLv2, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+OPENOCD_CONF_TOOL	:= autoconf
+OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
+	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/openocd.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, openocd)
+	@$(call install_fixup, openocd,PRIORITY,optional)
+	@$(call install_fixup, openocd,SECTION,base)
+	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
+	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
+
+	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
+ifneq ($(PTXCONF_OPENOCD_SCRIPTDIR), "")
+	@$(call install_alternative_tree, openocd, 0, 0, $(PTXCONF_OPENOCD_SCRIPTDIR))
+endif
+
+	@$(call install_finish, openocd)
+
+	@$(call touch)
+
+
+# vim: syntax=make
-- 
2.1.1


-- 
ptxdist mailing list
ptxdist@pengutronix.de

[ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
---
 rules/host-openocd.in   | 211 ++++++++++++++++++++++++++++++++++++++++++++++++
 rules/host-openocd.make |  69 ++++++++++++++++
 2 files changed, 280 insertions(+)
 create mode 100644 rules/host-openocd.in
 create mode 100644 rules/host-openocd.make

diff --git a/rules/host-openocd.in b/rules/host-openocd.in
new file mode 100644
index 0000000..ba5b072
--- /dev/null
+++ b/rules/host-openocd.in
@@ -0,0 +1,211 @@
+## SECTION=hosttools
+
+menuconfig HOST_OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
+	# libusb-0.1 ; currently no package in ptxdist, so disable it
+	#select HOST_LIBUSB_COMPAT	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
+	# libhidapi ; currently no package in ptxdist, so disable it
+	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
+	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
+	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if HOST_OPENOCD
+
+# ===== interface drivers =====
+
+config HOST_OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config HOST_OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config HOST_OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config HOST_OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config HOST_OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config HOST_OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config HOST_OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config HOST_OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config HOST_OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config HOST_OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config HOST_OPENOCD_VSLLINK
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Versaloon-Link JTAG Programmer"
+
+config HOST_OPENOCD_USBPROG
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "USBProg JTAG Programmer"
+
+config HOST_OPENOCD_RLINK
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Raisonance RLink JTAG Programmer"
+
+config HOST_OPENOCD_ARMJTAGEW
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+config HOST_OPENOCD_CMSIS_DAP
+	bool
+	# needs libhidapi
+	depends on BROKEN
+	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config HOST_OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if HOST_OPENOCD_PARPORT
+	config HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config HOST_OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on HOST_OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config HOST_OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config HOST_OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+config HOST_OPENOCD_USB_BLASTER_FTD2XX
+	bool
+	# needs ftd2xx
+	depends on BROKEN
+	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config HOST_OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config HOST_OPENOCD_ZY1000
+	bool
+	prompt "ZY1000 interface"
+
+if HOST_OPENOCD_ZY1000
+	config HOST_OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config HOST_OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config HOST_OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config HOST_OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config HOST_OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config HOST_OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config HOST_OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+config HOST_OPENOCD_PRESTO_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+config HOST_OPENOCD_OPENJTAG_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config HOST_OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config HOST_OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config HOST_OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config HOST_OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config HOST_OPENOCD_MINIDRIVER_DUMMY
+	bool
+	prompt "dummy minidriver"
+
+config HOST_OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/host-openocd.make b/rules/host-openocd.make
new file mode 100644
index 0000000..d72dd38
--- /dev/null
+++ b/rules/host-openocd.make
@@ -0,0 +1,69 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
+
+HOST_OPENOCD_VERSION	:= 0.8.0
+HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
+HOST_OPENOCD_SUFFIX	:= tar.bz2
+HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
+HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
+HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+HOST_OPENOCD_LICENSE	:= LGPLv2, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+HOST_OPENOCD_CONF_TOOL	:= autoconf
+HOST_OPENOCD_CONF_OPT	:= $(HOST_AUTOCONF) \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_REMOTE_BITBANG)-remote-bitbang \
+
+
+# vim: syntax=make
-- 
2.1.1


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

On Di, 2014-10-07 at 01:18 +0200, Andreas Pretzsch wrote:
> diff --git a/rules/openocd.make b/rules/openocd.make
> new file mode 100644
> index 0000000..e5b9741
> --- /dev/null
> +++ b/rules/openocd.make
> @@ -0,0 +1,91 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +PACKAGES-$(PTXCONF_OPENOCD) += openocd
> +
> +OPENOCD_VERSION	:= 0.8.0
> +OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +OPENOCD		:= openocd-$(OPENOCD_VERSION)
> +OPENOCD_SUFFIX	:= tar.bz2
> +OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
> +OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +OPENOCD_LICENSE	:= LGPLv2, BSD

I screwed up this license tag, cut and waste error :-(
The comment above is correct, the makefile tag not.
It should read:
OPENOCD_LICENSE	:= GPLv2+, BSD

Would you mind to fix this during apply or should I send a v3 ?

Sorry,
  Andreas Pretzsch

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

On Di, 2014-10-07 at 01:18 +0200, Andreas Pretzsch wrote:
> diff --git a/rules/host-openocd.make b/rules/host-openocd.make
> new file mode 100644
> index 0000000..d72dd38
> --- /dev/null
> +++ b/rules/host-openocd.make
> @@ -0,0 +1,69 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
> +
> +HOST_OPENOCD_VERSION	:= 0.8.0
> +HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
> +HOST_OPENOCD_SUFFIX	:= tar.bz2
> +HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
> +HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> +HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +HOST_OPENOCD_LICENSE	:= LGPLv2, BSD

Comment is correct, but license tag is wrong. It should read:
HOST_OPENOCD_LICENSE	:= GPLv2+, BSD

Just noting, as this patch won't probably be applied anyway, but kept
for informational purposes to whomever it might be useful for.

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Michael Olbrich]

On Tue, Oct 07, 2014 at 01:18:18AM +0200, Andreas Pretzsch wrote:
> Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>

I've fixed some issued and blacklisted one driver: it fails to build here.
Please check if things still work for you as expected.

Michael


> ---
>  ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch |  33 ++++
>  patches/openocd-0.8.0/autogen.sh                   |   1 +
>  patches/openocd-0.8.0/series                       |   1 +
>  rules/openocd.in                                   | 220 +++++++++++++++++++++
>  rules/openocd.make                                 |  91 +++++++++
>  5 files changed, 346 insertions(+)
>  create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
>  create mode 120000 patches/openocd-0.8.0/autogen.sh
>  create mode 100644 patches/openocd-0.8.0/series
>  create mode 100644 rules/openocd.in
>  create mode 100644 rules/openocd.make
> 
> diff --git a/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> new file mode 100644
> index 0000000..a7c65b7
> --- /dev/null
> +++ b/patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> @@ -0,0 +1,33 @@
> +From 930e41a2921b8c2905690153514099c8abf05828 Mon Sep 17 00:00:00 2001
> +From: Paul Fertser <fercerpav@gmail.com>
> +Date: Sat, 31 May 2014 08:19:51 +0400
> +Subject: [PATCH] configure.ac: correct test for USB_BLASTER_DRIVER AM symbol
> +
> +Blaster II should depend on the corresponding symbol, not on libusb-1
> +presence.
> +
> +Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece
> +Signed-off-by: Paul Fertser <fercerpav@gmail.com>
> +Reviewed-on: http://openocd.zylin.com/2159
> +Tested-by: jenkins
> +Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
> +---
> + configure.ac | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 1b4870e..9943beb 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -1174,7 +1174,7 @@ AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft223
> + AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
> + AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
> + AM_CONDITIONAL([JTAG_VPI], [test $build_jtag_vpi = yes -o $build_jtag_vpi = yes])
> +-AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $use_libusb1 = yes])
> ++AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes -o $enable_usb_blaster_2 != no])
> + AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
> + AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
> + AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
> +-- 
> +2.1.0
> +
> diff --git a/patches/openocd-0.8.0/autogen.sh b/patches/openocd-0.8.0/autogen.sh
> new file mode 120000
> index 0000000..9f8a4cb
> --- /dev/null
> +++ b/patches/openocd-0.8.0/autogen.sh
> @@ -0,0 +1 @@
> +../autogen.sh
> \ No newline at end of file
> diff --git a/patches/openocd-0.8.0/series b/patches/openocd-0.8.0/series
> new file mode 100644
> index 0000000..23230ef
> --- /dev/null
> +++ b/patches/openocd-0.8.0/series
> @@ -0,0 +1 @@
> +0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch
> diff --git a/rules/openocd.in b/rules/openocd.in
> new file mode 100644
> index 0000000..36194e9
> --- /dev/null
> +++ b/rules/openocd.in
> @@ -0,0 +1,220 @@
> +## SECTION=debug_tools
> +
> +menuconfig OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select LIBUSB	if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select LIBUSB	if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE
> +	# libusb-0.1
> +	select LIBUSB_COMPAT	if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW
> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.
> +
> +if OPENOCD
> +
> +# ===== scripts directory =====
> +
> +config OPENOCD_SCRIPTDIR
> +	string
> +	default "/usr/share/openocd/scripts/"
> +	prompt "OpenOCD script tree"
> +	help
> +	  OpenOCD relies on TCL scripts for core and SoC specific configs and
> +	  setups, interface (debug adapter) specific configs, RAM and flash
> +	  layout definitions, board init routines, helper routines, and so on.
> +
> +	  Keeping the default option of "/usr/share/openocd/scripts/" will
> +	  install all of them (several 100kB) to the target, which is probably
> +	  not what you want, as they are heavily target dependent.
> +
> +	  To install only a few required ones, create a tree in projectroot
> +	  named like the tree configured, so only these will be installed.
> +
> +	  Clear this config option to omit script installation at all.
> +
> +
> +# ===== interface drivers =====
> +
> +config OPENOCD_DUMMY
> +	bool
> +	prompt "dummy port driver"
> +
> +# --- libusb-1.x based
> +
> +config OPENOCD_FTDI
> +	bool
> +	prompt "MPSSE mode of FTDI based devices"
> +
> +config OPENOCD_STLINK
> +	bool
> +	prompt "ST-Link JTAG Programmer"
> +
> +config OPENOCD_TI_ICDI
> +	bool
> +	prompt "TI ICDI JTAG Programmer"
> +
> +config OPENOCD_ULINK
> +	bool
> +	prompt "Keil ULINK JTAG Programmer"
> +
> +config OPENOCD_USB_BLASTER_2
> +	bool
> +	prompt "Altera USB-Blaster II Compatible"
> +
> +# --- libusb-1.x or libusb-0.1 based
> +
> +config OPENOCD_JLINK
> +	bool
> +	prompt "Segger J-Link JTAG Programmer"
> +
> +config OPENOCD_OSBDM
> +	bool
> +	prompt "OSBDM (JTAG only) Programmer"
> +
> +config OPENOCD_OPENDOUS
> +	bool
> +	prompt "eStick/opendous JTAG Programmer"
> +
> +config OPENOCD_AICE
> +	bool
> +	prompt "Andes JTAG Programmer"
> +
> +# --- libusb-0.1 based
> +
> +config OPENOCD_VSLLINK
> +	bool
> +	prompt "Versaloon-Link JTAG Programmer"
> +
> +config OPENOCD_USBPROG
> +	bool
> +	prompt "USBProg JTAG Programmer"
> +
> +config OPENOCD_RLINK
> +	bool
> +	prompt "Raisonance RLink JTAG Programmer"
> +
> +config OPENOCD_ARMJTAGEW
> +	bool
> +	prompt "Olimex ARM-JTAG-EW Programmer"
> +
> +# --- hidapi based
> +config OPENOCD_CMSIS_DAP
> +	bool
> +	# needs libhidapi
> +	depends on BROKEN
> +	prompt "CMSIS-DAP Compliant Debugger"
> +
> +# --- various
> +
> +config OPENOCD_PARPORT
> +	bool
> +	prompt "pc parallel port driver"
> +
> +if OPENOCD_PARPORT
> +	config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
> +		bool
> +		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
> +
> +	config OPENOCD_PARPORT_GIVEIO
> +		bool
> +		depends on OPENOCD_PARPORT
> +		prompt "Enable use of giveio (CygWin only)"
> +endif
> +
> +config OPENOCD_JTAG_VPI
> +	bool
> +	prompt "JTAG VPI"
> +
> +config OPENOCD_USB_BLASTER_LIBFTDI
> +	bool
> +	prompt "Altera USB-Blaster (libftdi driver, opensource)"
> +
> +config OPENOCD_USB_BLASTER_FTD2XX
> +	bool
> +	# needs ftd2xx
> +	depends on BROKEN
> +	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
> +
> +config OPENOCD_AMTJTAGACCEL
> +	bool
> +	prompt "Amontec JTAG-Accelerator driver"
> +
> +config OPENOCD_ZY1000
> +	bool
> +	prompt "ZY1000 interface"
> +
> +if OPENOCD_ZY1000
> +	config OPENOCD_ZY1000_MASTER
> +		bool
> +		prompt "Use ZY1000 JTAG master registers"
> +endif
> +
> +config OPENOCD_IOUTIL
> +	bool
> +	prompt "ioutil functions - for standalone OpenOCD implementations"
> +
> +config OPENOCD_EP93XX
> +	bool
> +	prompt "EP93xx based SBCs"
> +
> +config OPENOCD_AT91RM9200
> +	bool
> +	prompt "AT91RM9200 based SBCs"
> +
> +config OPENOCD_BCM2835GPIO
> +	bool
> +	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
> +
> +config OPENOCD_GW16012
> +	bool
> +	prompt "Gateworks GW16012 JTAG Programmer"
> +
> +config OPENOCD_PRESTO_LIBFTDI
> +	bool
> +	prompt "ASIX Presto Programmer using the libftdi driver"
> +
> +config OPENOCD_PRESTO_FTD2XX
> +	# needs ftd2xx
> +	depends on BROKEN
> +	bool
> +	prompt "ASIX Presto Programmer using the FTD2XX driver"
> +
> +config OPENOCD_OPENJTAG_FTD2XX
> +	# needs ftd2xx
> +	depends on BROKEN
> +	bool
> +	prompt "OpenJTAG Programmer with ftd2xx driver"
> +
> +config OPENOCD_OPENJTAG_FTDI
> +	bool
> +	prompt "OpenJTAG Programmer with ftdi driver"
> +
> +config OPENOCD_OOCD_TRACE
> +	bool
> +	prompt "prototype OpenOCD+trace ETM capture hardware"
> +
> +config OPENOCD_BUSPIRATE
> +	bool
> +	prompt "Buspirate"
> +
> +config OPENOCD_SYSFSGPIO
> +	bool
> +	prompt "programming driven via sysfs gpios"
> +
> +config OPENOCD_MINIDRIVER_DUMMY
> +	bool
> +	prompt "dummy minidriver"
> +
> +config OPENOCD_REMOTE_BITBANG
> +	bool
> +	prompt "Remote Bitbang jtag driver"
> +
> +endif
> diff --git a/rules/openocd.make b/rules/openocd.make
> new file mode 100644
> index 0000000..e5b9741
> --- /dev/null
> +++ b/rules/openocd.make
> @@ -0,0 +1,91 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +PACKAGES-$(PTXCONF_OPENOCD) += openocd
> +
> +OPENOCD_VERSION	:= 0.8.0
> +OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +OPENOCD		:= openocd-$(OPENOCD_VERSION)
> +OPENOCD_SUFFIX	:= tar.bz2
> +OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX))
> +OPENOCD_SOURCE	:= $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX)
> +OPENOCD_DIR	:= $(BUILDDIR)/$(OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +OPENOCD_LICENSE	:= LGPLv2, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +OPENOCD_CONF_TOOL	:= autoconf
> +OPENOCD_CONF_OPT	:= $(CROSS_AUTOCONF_USR) \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \
> +	--$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> +	--$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/openocd.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, openocd)
> +	@$(call install_fixup, openocd,PRIORITY,optional)
> +	@$(call install_fixup, openocd,SECTION,base)
> +	@$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch <apr@cn-eng.de>")
> +	@$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger")
> +
> +	@$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd)
> +ifneq ($(PTXCONF_OPENOCD_SCRIPTDIR), "")
> +	@$(call install_alternative_tree, openocd, 0, 0, $(PTXCONF_OPENOCD_SCRIPTDIR))
> +endif
> +
> +	@$(call install_finish, openocd)
> +
> +	@$(call touch)
> +
> +
> +# vim: syntax=make
> -- 
> 2.1.1
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Michael Olbrich]

On Tue, Oct 07, 2014 at 01:18:25AM +0200, Andreas Pretzsch wrote:
> Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>

I think the host package should just enable all drivers. The two mini
drivers that cannot be enabled with the rest are either broken, or just a
dummy driver, so I think it's ok.

Michael

> ---
>  rules/host-openocd.in   | 211 ++++++++++++++++++++++++++++++++++++++++++++++++
>  rules/host-openocd.make |  69 ++++++++++++++++
>  2 files changed, 280 insertions(+)
>  create mode 100644 rules/host-openocd.in
>  create mode 100644 rules/host-openocd.make
> 
> diff --git a/rules/host-openocd.in b/rules/host-openocd.in
> new file mode 100644
> index 0000000..ba5b072
> --- /dev/null
> +++ b/rules/host-openocd.in
> @@ -0,0 +1,211 @@
> +## SECTION=hosttools
> +
> +menuconfig HOST_OPENOCD
> +	tristate
> +	prompt "OpenOCD                       "
> +
> +	# libusb-1.x
> +	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
> +	# libusb-1.x or libusb-0.1
> +	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
> +	# libusb-0.1 ; currently no package in ptxdist, so disable it
> +	#select HOST_LIBUSB_COMPAT	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
> +	# libhidapi ; currently no package in ptxdist, so disable it
> +	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
> +	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
> +	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI
> +
> +	help
> +	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
> +	  programming and boundary-scan testing for embedded target devices.
> +	  It supports JTAG and SWD (direct or via dongle) to access targets.
> +	  Flash writing is supported for various internal and external types.
> +	  It is controlled with TCL scripts and can act as gdbserver.
> +
> +if HOST_OPENOCD
> +
> +# ===== interface drivers =====
> +
> +config HOST_OPENOCD_DUMMY
> +	bool
> +	prompt "dummy port driver"
> +
> +# --- libusb-1.x based
> +
> +config HOST_OPENOCD_FTDI
> +	bool
> +	prompt "MPSSE mode of FTDI based devices"
> +
> +config HOST_OPENOCD_STLINK
> +	bool
> +	prompt "ST-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_TI_ICDI
> +	bool
> +	prompt "TI ICDI JTAG Programmer"
> +
> +config HOST_OPENOCD_ULINK
> +	bool
> +	prompt "Keil ULINK JTAG Programmer"
> +
> +config HOST_OPENOCD_USB_BLASTER_2
> +	bool
> +	prompt "Altera USB-Blaster II Compatible"
> +
> +# --- libusb-1.x or libusb-0.1 based
> +
> +config HOST_OPENOCD_JLINK
> +	bool
> +	prompt "Segger J-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_OSBDM
> +	bool
> +	prompt "OSBDM (JTAG only) Programmer"
> +
> +config HOST_OPENOCD_OPENDOUS
> +	bool
> +	prompt "eStick/opendous JTAG Programmer"
> +
> +config HOST_OPENOCD_AICE
> +	bool
> +	prompt "Andes JTAG Programmer"
> +
> +# --- libusb-0.1 based
> +
> +config HOST_OPENOCD_VSLLINK
> +	bool
> +	# needs libusb-0.1
> +	depends on BROKEN
> +	prompt "Versaloon-Link JTAG Programmer"
> +
> +config HOST_OPENOCD_USBPROG
> +	bool
> +	# needs libusb-0.1
> +	depends on BROKEN
> +	prompt "USBProg JTAG Programmer"
> +
> +config HOST_OPENOCD_RLINK
> +	bool
> +	# needs libusb-0.1
> +	depends on BROKEN
> +	prompt "Raisonance RLink JTAG Programmer"
> +
> +config HOST_OPENOCD_ARMJTAGEW
> +	bool
> +	# needs libusb-0.1
> +	depends on BROKEN
> +	prompt "Olimex ARM-JTAG-EW Programmer"
> +
> +# --- hidapi based
> +config HOST_OPENOCD_CMSIS_DAP
> +	bool
> +	# needs libhidapi
> +	depends on BROKEN
> +	prompt "CMSIS-DAP Compliant Debugger"
> +
> +# --- various
> +
> +config HOST_OPENOCD_PARPORT
> +	bool
> +	prompt "pc parallel port driver"
> +
> +if HOST_OPENOCD_PARPORT
> +	config HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
> +		bool
> +		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
> +
> +	config HOST_OPENOCD_PARPORT_GIVEIO
> +		bool
> +		depends on HOST_OPENOCD_PARPORT
> +		prompt "Enable use of giveio (CygWin only)"
> +endif
> +
> +config HOST_OPENOCD_JTAG_VPI
> +	bool
> +	prompt "JTAG VPI"
> +
> +config HOST_OPENOCD_USB_BLASTER_LIBFTDI
> +	bool
> +	prompt "Altera USB-Blaster (libftdi driver, opensource)"
> +
> +config HOST_OPENOCD_USB_BLASTER_FTD2XX
> +	bool
> +	# needs ftd2xx
> +	depends on BROKEN
> +	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
> +
> +config HOST_OPENOCD_AMTJTAGACCEL
> +	bool
> +	prompt "Amontec JTAG-Accelerator driver"
> +
> +config HOST_OPENOCD_ZY1000
> +	bool
> +	prompt "ZY1000 interface"
> +
> +if HOST_OPENOCD_ZY1000
> +	config HOST_OPENOCD_ZY1000_MASTER
> +		bool
> +		prompt "Use ZY1000 JTAG master registers"
> +endif
> +
> +config HOST_OPENOCD_IOUTIL
> +	bool
> +	prompt "ioutil functions - for standalone OpenOCD implementations"
> +
> +config HOST_OPENOCD_EP93XX
> +	bool
> +	prompt "EP93xx based SBCs"
> +
> +config HOST_OPENOCD_AT91RM9200
> +	bool
> +	prompt "AT91RM9200 based SBCs"
> +
> +config HOST_OPENOCD_BCM2835GPIO
> +	bool
> +	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
> +
> +config HOST_OPENOCD_GW16012
> +	bool
> +	prompt "Gateworks GW16012 JTAG Programmer"
> +
> +config HOST_OPENOCD_PRESTO_LIBFTDI
> +	bool
> +	prompt "ASIX Presto Programmer using the libftdi driver"
> +
> +config HOST_OPENOCD_PRESTO_FTD2XX
> +	# needs ftd2xx
> +	depends on BROKEN
> +	bool
> +	prompt "ASIX Presto Programmer using the FTD2XX driver"
> +
> +config HOST_OPENOCD_OPENJTAG_FTD2XX
> +	# needs ftd2xx
> +	depends on BROKEN
> +	bool
> +	prompt "OpenJTAG Programmer with ftd2xx driver"
> +
> +config HOST_OPENOCD_OPENJTAG_FTDI
> +	bool
> +	prompt "OpenJTAG Programmer with ftdi driver"
> +
> +config HOST_OPENOCD_OOCD_TRACE
> +	bool
> +	prompt "prototype OpenOCD+trace ETM capture hardware"
> +
> +config HOST_OPENOCD_BUSPIRATE
> +	bool
> +	prompt "Buspirate"
> +
> +config HOST_OPENOCD_SYSFSGPIO
> +	bool
> +	prompt "programming driven via sysfs gpios"
> +
> +config HOST_OPENOCD_MINIDRIVER_DUMMY
> +	bool
> +	prompt "dummy minidriver"
> +
> +config HOST_OPENOCD_REMOTE_BITBANG
> +	bool
> +	prompt "Remote Bitbang jtag driver"
> +
> +endif
> diff --git a/rules/host-openocd.make b/rules/host-openocd.make
> new file mode 100644
> index 0000000..d72dd38
> --- /dev/null
> +++ b/rules/host-openocd.make
> @@ -0,0 +1,69 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
> +
> +HOST_OPENOCD_VERSION	:= 0.8.0
> +HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
> +HOST_OPENOCD_SUFFIX	:= tar.bz2
> +HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
> +HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
> +HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
> +# License: OpenOCD: GPLv2+, jimtcl: BSD
> +HOST_OPENOCD_LICENSE	:= LGPLv2, BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +HOST_OPENOCD_CONF_TOOL	:= autoconf
> +HOST_OPENOCD_CONF_OPT	:= $(HOST_AUTOCONF) \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_DUMMY)-dummy \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_FTDI)-ftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_STLINK)-stlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_TI_ICDI)-ti-icdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ULINK)-ulink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JLINK)-jlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OSBDM)-osbdm \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENDOUS)-opendous \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AICE)-aice \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_VSLLINK)-vsllink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USBPROG)-usbprog \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_RLINK)-rlink \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ARMJTAGEW)-armjtagew \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_CMSIS_DAP)-cmsis-dap \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT)-parport \
> +	--$(call ptx/disen, PTXCONF_HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JTAG_VPI)-jtag_vpi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000)-zy1000 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000_MASTER)-zy1000-master \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_IOUTIL)-ioutil \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_EP93XX)-ep93xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AT91RM9200)-at91rm9200 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BCM2835GPIO)-bcm2835gpio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_GW16012)-gw16012 \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OOCD_TRACE)-oocd_trace \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BUSPIRATE)-buspirate \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_SYSFSGPIO)-sysfsgpio \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> +	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_REMOTE_BITBANG)-remote-bitbang \
> +
> +
> +# vim: syntax=make
> -- 
> 2.1.1
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

On Do, 2014-11-13 at 17:46 +0100, Michael Olbrich wrote:
> On Tue, Oct 07, 2014 at 01:18:18AM +0200, Andreas Pretzsch wrote:
> > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> 
> I've fixed some issued and blacklisted one driver: it fails to build here.
> Please check if things still work for you as expected.

Will do. Nothing yet in official ptxdist repo (makes sense), so could
you please put your changes on the list (or send it to me directly) ?

Thanks,
  Andreas

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

On Do, 2014-11-13 at 17:48 +0100, Michael Olbrich wrote:
> On Tue, Oct 07, 2014 at 01:18:25AM +0200, Andreas Pretzsch wrote:
> > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> 
> I think the host package should just enable all drivers. The two mini
> drivers that cannot be enabled with the rest are either broken, or just a
> dummy driver, so I think it's ok.

Well, there is some more-or-less default in the official OpenOCD,
configure will enable about half of them based on what is found on the
system (usb libs, and so on). Won't fit for anyone. One could use this.
Or more likely, just set all not marked as broken to "default y".
Just, I honestly didn't bother to care about it, and test under what
circumstances which is compiling, as probably everyone using OpenOCD
will enable the ones they need.
Which is why I put it the way it is now. Developer tool, in the end.

As said before, the host-package is just a by-product of the target
package. One could build it out of ptxdist or externally, the latter
would be more common. This is why we talked about even including the
host package in ptxdist.

So, I leave the choice up to you:
A) I update the patch with "default y" to all non-broken drivers, and do
a quick compile test here. Will take a few days.
B) We keep it as it is, as a reference on the list for anyone who might
find it useful.

Best regards,
  Andreas

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Michael Olbrich]

On Sun, Nov 16, 2014 at 04:30:07PM +0100, Andreas Pretzsch wrote:
> On Do, 2014-11-13 at 17:46 +0100, Michael Olbrich wrote:
> > On Tue, Oct 07, 2014 at 01:18:18AM +0200, Andreas Pretzsch wrote:
> > > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> > 
> > I've fixed some issued and blacklisted one driver: it fails to build here.
> > Please check if things still work for you as expected.
> 
> Will do. Nothing yet in official ptxdist repo (makes sense), so could
> you please put your changes on the list (or send it to me directly) ?

Sorry, I forgot to push it. It's there now.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Michael Olbrich]

On Sun, Nov 16, 2014 at 04:42:01PM +0100, Andreas Pretzsch wrote:
> On Do, 2014-11-13 at 17:48 +0100, Michael Olbrich wrote:
> > On Tue, Oct 07, 2014 at 01:18:25AM +0200, Andreas Pretzsch wrote:
> > > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> > 
> > I think the host package should just enable all drivers. The two mini
> > drivers that cannot be enabled with the rest are either broken, or just a
> > dummy driver, so I think it's ok.
> 
> Well, there is some more-or-less default in the official OpenOCD,
> configure will enable about half of them based on what is found on the
> system (usb libs, and so on). Won't fit for anyone. One could use this.
> Or more likely, just set all not marked as broken to "default y".
> Just, I honestly didn't bother to care about it, and test under what
> circumstances which is compiling, as probably everyone using OpenOCD
> will enable the ones they need.
> Which is why I put it the way it is now. Developer tool, in the end.
> 
> As said before, the host-package is just a by-product of the target
> package. One could build it out of ptxdist or externally, the latter
> would be more common. This is why we talked about even including the
> host package in ptxdist.
> 
> So, I leave the choice up to you:
> A) I update the patch with "default y" to all non-broken drivers, and do
> a quick compile test here. Will take a few days.
> B) We keep it as it is, as a reference on the list for anyone who might
> find it useful.

Lets go with B), for now at least.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Andreas Pretzsch]

On Do, 2014-11-13 at 17:46 +0100, Michael Olbrich wrote:
> On Tue, Oct 07, 2014 at 01:18:18AM +0200, Andreas Pretzsch wrote:
> > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> 
> I've fixed some issued and blacklisted one driver: it fails to build here.
> Please check if things still work for you as expected.

Looks good to me, thanks for fixing.

What irritates me a bit is the license tag in the rules file:
> # License: OpenOCD: GPLv2+, jimtcl: BSD
> OPENOCD_LICENSE := LGPLv2+, BSD

While I screwed this up in the original patch (had "LGPLv2, BSD" there
instead of "GPLv2+, BSD", see my mail from Sun, 26 Oct 2014 18:24:23
+0100 on the list about fixing), you changed it to "LGPLv2+, BSD".

As far as I can see, the whole (relevant) OpenOCD codebase is GPLv2+,
but not LGPL.
Was this intentional or did you just follow my example of cut&waste
errors ? ;-)

Thanks,
  Andreas

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521571
89073 Ulm, Germany                        email: apr@cn-eng.de


-- 
ptxdist mailing list
ptxdist@pengutronix.de

Re: [ptxdist] [PATCH v2 1/2] openocd: new package for openocd-0.8.0

[Michael Olbrich]

On Sat, Nov 29, 2014 at 03:34:29PM +0100, Andreas Pretzsch wrote:
> On Do, 2014-11-13 at 17:46 +0100, Michael Olbrich wrote:
> > On Tue, Oct 07, 2014 at 01:18:18AM +0200, Andreas Pretzsch wrote:
> > > Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
> > 
> > I've fixed some issued and blacklisted one driver: it fails to build here.
> > Please check if things still work for you as expected.
> 
> Looks good to me, thanks for fixing.
> 
> What irritates me a bit is the license tag in the rules file:
> > # License: OpenOCD: GPLv2+, jimtcl: BSD
> > OPENOCD_LICENSE := LGPLv2+, BSD
> 
> While I screwed this up in the original patch (had "LGPLv2, BSD" there
> instead of "GPLv2+, BSD", see my mail from Sun, 26 Oct 2014 18:24:23
> +0100 on the list about fixing), you changed it to "LGPLv2+, BSD".
> 
> As far as I can see, the whole (relevant) OpenOCD codebase is GPLv2+,
> but not LGPL.
> Was this intentional or did you just follow my example of cut&waste
> errors ? ;-)

This was not intentional. I just used some patch from you, and I forgot the
license issue. The code is indeed GPLv2+. I've fixed this now.

Michael

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de