From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 1/1] u-boot-tools: Update to version 2014.07
Date: Thu, 13 Nov 2014 17:40:39 +0100 [thread overview]
Message-ID: <20141113164039.GI30196@pengutronix.de> (raw)
In-Reply-To: <1411974518-22075-1-git-send-email-alexander.stein@systec-electronic.com>
On Mon, Sep 29, 2014 at 09:08:38AM +0200, Alexander Stein wrote:
> This updates the u-boot tools to 2014.07, where fw_printenv/fw_setenv
> also support MMC devices.
> The now somewhat changed build system always need a target configured. So
> use sandbox as dummy. Now it is not possible to build mkimage for the
> target. So remove that from Kconfig.
>
> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Thanks, applied.
Michael
> ---
> rules/host-u-boot-tools.make | 2 +-
> rules/u-boot-tools.in | 10 +---------
> rules/u-boot-tools.make | 16 +++++-----------
> 3 files changed, 7 insertions(+), 21 deletions(-)
>
> diff --git a/rules/host-u-boot-tools.make b/rules/host-u-boot-tools.make
> index 27543f9..d786418 100644
> --- a/rules/host-u-boot-tools.make
> +++ b/rules/host-u-boot-tools.make
> @@ -19,7 +19,7 @@ HOST_PACKAGES-$(PTXCONF_HOST_U_BOOT_TOOLS) += host-u-boot-tools
> # ----------------------------------------------------------------------------
>
> HOST_U_BOOT_TOOLS_CONF_TOOL := NO
> -HOST_U_BOOT_TOOLS_MAKE_OPT := tools
> +HOST_U_BOOT_TOOLS_MAKE_OPT := sandbox_config tools
>
> # ----------------------------------------------------------------------------
> # Install
> diff --git a/rules/u-boot-tools.in b/rules/u-boot-tools.in
> index b02ded5..76ed28a 100644
> --- a/rules/u-boot-tools.in
> +++ b/rules/u-boot-tools.in
> @@ -5,18 +5,10 @@ menuconfig U_BOOT_TOOLS
> prompt "u-boot-tools "
> help
> some helpful tools from U-Boot project. Most important tool in
> - this section is mkimage to generate U-Boot boot images.
> + this section is fw_printenv/fw_setenv to read/write U-Boot settings.
>
> if U_BOOT_TOOLS
>
> -config U_BOOT_TOOLS_TOOL_MKIMAGE
> - tristate
> - default y
> - prompt "mkimage"
> - help
> - the U-Boot mkimage command is used to create boot images for
> - the U-Boot bootloader.
> -
> config U_BOOT_TOOLS_TOOL_ENV
> tristate
> default n
> diff --git a/rules/u-boot-tools.make b/rules/u-boot-tools.make
> index 29a912c..350175a 100644
> --- a/rules/u-boot-tools.make
> +++ b/rules/u-boot-tools.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_U_BOOT_TOOLS) += u-boot-tools
> #
> # Paths and names
> #
> -U_BOOT_TOOLS_VERSION := 2011.12
> -U_BOOT_TOOLS_MD5 := 7f29b9f6da44d6e46e988e7561fd1d5f
> +U_BOOT_TOOLS_VERSION := 2014.07
> +U_BOOT_TOOLS_MD5 := 36d4bad687edcafa396fee607e505d4e
> U_BOOT_TOOLS := u-boot-$(U_BOOT_TOOLS_VERSION)
> U_BOOT_TOOLS_SUFFIX := tar.bz2
> U_BOOT_TOOLS_URL := http://ftp.denx.de/pub/u-boot/$(U_BOOT_TOOLS).$(U_BOOT_TOOLS_SUFFIX)
> @@ -30,10 +30,10 @@ U_BOOT_TOOLS_LICENSE := GPLv2
> # ----------------------------------------------------------------------------
>
> U_BOOT_TOOLS_CONF_TOOL := NO
> +# just pick sandbox as a dummy target config
> U_BOOT_TOOLS_MAKE_OPT := \
> - HOSTCC="$(CROSS_CC)" \
> - HOSTSTRIP="$(CROSS_STRIP)" \
> - tools
> + CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
> + sandbox_config tools
>
> ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
> U_BOOT_TOOLS_MAKE_OPT += env
> @@ -45,8 +45,6 @@ endif
>
> $(STATEDIR)/u-boot-tools.install:
> @$(call targetinfo)
> - install -D $(U_BOOT_TOOLS_DIR)/tools/mkimage \
> - $(U_BOOT_TOOLS_PKGDIR)/usr/bin/mkimage
> ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
> install -D $(U_BOOT_TOOLS_DIR)/tools/env/fw_printenv \
> $(U_BOOT_TOOLS_PKGDIR)/usr/sbin/fw_printenv
> @@ -67,10 +65,6 @@ $(STATEDIR)/u-boot-tools.targetinstall:
> "Andreas Bießmann <andreas@biessmann.de>")
> @$(call install_fixup, u-boot-tools,DESCRIPTION,missing)
>
> -ifdef PTXCONF_U_BOOT_TOOLS_TOOL_MKIMAGE
> - @$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/bin/mkimage)
> -endif
> -
> ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
> @$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/sbin/fw_printenv)
> @$(call install_link, u-boot-tools, fw_printenv, /usr/sbin/fw_setenv)
> --
> 1.8.5.5
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
prev parent reply other threads:[~2014-11-13 16:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 7:08 Alexander Stein
2014-10-07 12:24 ` Alexander Stein
2014-11-13 16:40 ` Michael Olbrich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141113164039.GI30196@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox