From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ptx.hi.pengutronix.de ([2001:67c:670:100:1d::c0] ident=Debian-exim) by metis.ext.pengutronix.de with esmtp (Exim 4.72) (envelope-from ) id 1XZHA6-0005FT-Hm for ptxdist@pengutronix.de; Wed, 01 Oct 2014 12:29:34 +0200 Received: from mol by ptx.hi.pengutronix.de with local (Exim 4.80) (envelope-from ) id 1XZHA6-0005zN-GN for ptxdist@pengutronix.de; Wed, 01 Oct 2014 12:29:34 +0200 Date: Wed, 1 Oct 2014 12:29:34 +0200 From: Michael Olbrich Message-ID: <20141001102934.GE16481@pengutronix.de> References: <1412010731-18154-1-git-send-email-apr@cn-eng.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1412010731-18154-1-git-send-email-apr@cn-eng.de> Subject: Re: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target) Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: ptxdist@pengutronix.de On Mon, Sep 29, 2014 at 07:12:11PM +0200, Andreas Pretzsch wrote: > Signed-off-by: Andreas Pretzsch > --- > ...c-correct-test-for-USB_BLASTER_DRIVER-AM-.patch | 33 ++++ > ...e-correct-test-for-USB_BLASTER_DRIVER-AM-.patch | 20 +++ > patches/openocd-0.8.0/series | 4 + > rules/host-openocd.in | 199 +++++++++++++++++++++ > rules/host-openocd.make | 76 ++++++++ > rules/openocd.in | 199 +++++++++++++++++++++ > rules/openocd.make | 96 ++++++++++ > 7 files changed, 627 insertions(+) > create mode 100644 patches/openocd-0.8.0/0001-configure.ac-correct-test-for-USB_BLASTER_DRIVER-AM-.patch > create mode 100644 patches/openocd-0.8.0/0002-configure-correct-test-for-USB_BLASTER_DRIVER-AM-.patch > create mode 100644 patches/openocd-0.8.0/series > create mode 100644 rules/host-openocd.in > create mode 100644 rules/host-openocd.make > create mode 100644 rules/openocd.in > create mode 100644 rules/openocd.make > [...] > diff --git a/rules/host-openocd.in b/rules/host-openocd.in > new file mode 100644 > index 0000000..d8c4e7e > --- /dev/null > +++ b/rules/host-openocd.in > @@ -0,0 +1,199 @@ > +## SECTION=hosttools > + > +menuconfig HOST_OPENOCD > + tristate > + prompt "OpenOCD " > + > + # libusb-1.x > + select HOST_LIBUSB if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2 > + # libusb-1.x or libusb-0.1 > + select HOST_LIBUSB if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE > + # libusb-0.1 ; no HOST_LIBUSB_COMPAT, so select HOST_LIBUSB and hope for the best > + select HOST_LIBUSB if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW > + # libhidapi ; currently no package in ptxdist, so disable it > + #select HOST_HIDAPI if HOST_OPENOCD_CMSIS_DAP > + # libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it > + #select HOST_LIBFTDI1 if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI > + > + help > + The Open On-Chip Debugger (OpenOCD) provides debugging, in-system > + programming and boundary-scan testing for embedded target devices. > + It supports JTAG and SWD (direct or via dongle) to access targets. > + Flash writing is supported for various internal and external types. > + It is controlled with TCL scripts and can act as gdbserver. I think we should drop host-openocd for now. I'm not familiar OpenOCD but unless you need exactly the same version on the PC and the Target, I think we can let the Desktop Linux Distribution provide it. [...] > diff --git a/rules/openocd.in b/rules/openocd.in > new file mode 100644 > index 0000000..56384e7 > --- /dev/null > +++ b/rules/openocd.in > @@ -0,0 +1,199 @@ > +## SECTION=debug_tools > + > +menuconfig OPENOCD > + tristate > + prompt "OpenOCD " > + > + # libusb-1.x > + select LIBUSB if OPENOCD_FTDI || OPENOCD_STLINK || OPENOCD_TI_ICDI || OPENOCD_ULINK || OPENOCD_USB_BLASTER_2 > + # libusb-1.x or libusb-0.1 > + select LIBUSB if OPENOCD_JLINK || OPENOCD_OSBDM || OPENOCD_OPENDOUS || OPENOCD_AICE > + # libusb-0.1 > + select LIBUSB_COMPAT if OPENOCD_VSLLINK || OPENOCD_USBPROG || OPENOCD_RLINK || OPENOCD_ARMJTAGEW > + # libhidapi ; currently no package in ptxdist, so disable it > + #select HIDAPI if OPENOCD_CMSIS_DAP > + # libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it > + #select LIBFTDI1 if OPENOCD_USB_BLASTER_LIBFTDI || OPENOCD_PRESTO_LIBFTDI || OPENOCD_OPENJTAG_FTDI drop this here. > + > + help > + The Open On-Chip Debugger (OpenOCD) provides debugging, in-system > + programming and boundary-scan testing for embedded target devices. > + It supports JTAG and SWD (direct or via dongle) to access targets. > + Flash writing is supported for various internal and external types. > + It is controlled with TCL scripts and can act as gdbserver. > + > +if OPENOCD > + > +# ===== interface drivers ===== > + > +config OPENOCD_DUMMY > + bool > + prompt "dummy port driver" > + > +# --- libusb-1.x based > + > +config OPENOCD_FTDI > + bool > + prompt "MPSSE mode of FTDI based devices" > + > +config OPENOCD_STLINK > + bool > + prompt "ST-Link JTAG Programmer" > + > +config OPENOCD_TI_ICDI > + bool > + prompt "TI ICDI JTAG Programmer" > + > +config OPENOCD_ULINK > + bool > + prompt "Keil ULINK JTAG Programmer" > + > +config OPENOCD_USB_BLASTER_2 > + bool > + prompt "Altera USB-Blaster II Compatible" > + > +# --- libusb-1.x or libusb-0.1 based > + > +config OPENOCD_JLINK > + bool > + prompt "Segger J-Link JTAG Programmer" > + > +config OPENOCD_OSBDM > + bool > + prompt "OSBDM (JTAG only) Programmer" > + > +config OPENOCD_OPENDOUS > + bool > + prompt "eStick/opendous JTAG Programmer" > + > +config OPENOCD_AICE > + bool > + prompt "Andes JTAG Programmer" > + > +# --- libusb-0.1 based > + > +config OPENOCD_VSLLINK > + bool > + prompt "Versaloon-Link JTAG Programmer" > + > +config OPENOCD_USBPROG > + bool > + prompt "USBProg JTAG Programmer" > + > +config OPENOCD_RLINK > + bool > + prompt "Raisonance RLink JTAG Programmer" > + > +config OPENOCD_ARMJTAGEW > + bool > + prompt "Olimex ARM-JTAG-EW Programmer" > + > +# --- hidapi based > +# currently no package in ptxdist, so disable it > +#config OPENOCD_CMSIS_DAP > +# bool > +# prompt "CMSIS-DAP Compliant Debugger" make a normal option but add: # needs libhidapi depends on BROKEN > + > +# --- various > + > +config OPENOCD_PARPORT > + bool > + prompt "pc parallel port driver" > + > +if OPENOCD_PARPORT > + config OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV > + bool > + prompt "Disable use of ppdev (/dev/parportN) (x86 only)" > + > + config OPENOCD_PARPORT_GIVEIO > + bool > + depends on OPENOCD_PARPORT > + prompt "Enable use of giveio (CygWin only)" > +endif > + > +config OPENOCD_JTAG_VPI > + bool > + prompt "JTAG VPI" > + > +config OPENOCD_USB_BLASTER_LIBFTDI > + bool > + prompt "Altera USB-Blaster (libftdi driver, opensource)" > + > +# no ftd2xx package in ptxdist, so disable it > +#config OPENOCD_USB_BLASTER_FTD2XX > +# bool > +# prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)" > + > +config OPENOCD_AMTJTAGACCEL > + bool > + prompt "Amontec JTAG-Accelerator driver" > + > +config OPENOCD_ZY1000 > + bool > + prompt "ZY1000 interface" > + > +if OPENOCD_ZY1000 > + config OPENOCD_ZY1000_MASTER > + bool > + prompt "Use ZY1000 JTAG master registers" > +endif > + > +config OPENOCD_IOUTIL > + bool > + prompt "ioutil functions - for standalone OpenOCD implementations" > + > +config OPENOCD_EP93XX > + bool > + prompt "EP93xx based SBCs" > + > +config OPENOCD_AT91RM9200 > + bool > + prompt "AT91RM9200 based SBCs" > + > +config OPENOCD_BCM2835GPIO > + bool > + prompt "bitbanging on BCM2835 (as found in Raspberry Pi)" > + > +config OPENOCD_GW16012 > + bool > + prompt "Gateworks GW16012 JTAG Programmer" > + > +config OPENOCD_PRESTO_LIBFTDI > + bool > + prompt "ASIX Presto Programmer using the libftdi driver" > + > +# no ftd2xx package in ptxdist, so disable it > +#config OPENOCD_PRESTO_FTD2XX > +# bool > +# prompt "ASIX Presto Programmer using the FTD2XX driver" same here > + > +# no ftd2xx package in ptxdist, so disable it > +#config OPENOCD_OPENJTAG_FTD2XX > +# bool > +# prompt "OpenJTAG Programmer with ftd2xx driver" and here > + > +config OPENOCD_OPENJTAG_FTDI > + bool > + prompt "OpenJTAG Programmer with ftdi driver" > + > +config OPENOCD_OOCD_TRACE > + bool > + prompt "prototype OpenOCD+trace ETM capture hardware" > + > +config OPENOCD_BUSPIRATE > + bool > + prompt "Buspirate" > + > +config OPENOCD_SYSFSGPIO > + bool > + prompt "programming driven via sysfs gpios" > + > +config OPENOCD_MINIDRIVER_DUMMY > + bool > + prompt "dummy minidriver" > + > +config OPENOCD_REMOTE_BITBANG > + bool > + prompt "Remote Bitbang jtag driver" > + > +endif > diff --git a/rules/openocd.make b/rules/openocd.make > new file mode 100644 > index 0000000..8301df3 > --- /dev/null > +++ b/rules/openocd.make > @@ -0,0 +1,96 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2014 by Andreas Pretzsch > +# > +# See CREDITS for details about who has contributed to this project. > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_OPENOCD) += openocd > + > +# > +# Paths and names > +# > +OPENOCD_VERSION := 0.8.0 > +OPENOCD_MD5 := 6d83c34763a5f1d1ac7ad83c5a11f4fb > +OPENOCD := openocd-$(OPENOCD_VERSION) > +OPENOCD_SUFFIX := tar.bz2 > +OPENOCD_URL := http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)/$(OPENOCD).$(OPENOCD_SUFFIX) > +#OPENOCD_URL := $(call ptx/mirror, SF, openocd/$(OPENOCD).$(OPENOCD_SUFFIX)) > +OPENOCD_SOURCE := $(SRCDIR)/$(OPENOCD).$(OPENOCD_SUFFIX) > +OPENOCD_DIR := $(BUILDDIR)/$(OPENOCD) > +# License: OpenOCD: GPLv2+, jimtcl: BSD > +OPENOCD_LICENSE := LGPLv2, BSD > + > +# ---------------------------------------------------------------------------- > +# Prepare > +# ---------------------------------------------------------------------------- > + > +OPENOCD_CONF_TOOL := autoconf > +OPENOCD_CONF_OPT := $(CROSS_AUTOCONF_USR) \ > + --$(call ptx/endis, PTXCONF_OPENOCD_DUMMY)-dummy \ > + --$(call ptx/endis, PTXCONF_OPENOCD_FTDI)-ftdi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_STLINK)-stlink \ > + --$(call ptx/endis, PTXCONF_OPENOCD_TI_ICDI)-ti-icdi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_ULINK)-ulink \ > + --$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \ > + --$(call ptx/endis, PTXCONF_OPENOCD_JLINK)-jlink \ > + --$(call ptx/endis, PTXCONF_OPENOCD_OSBDM)-osbdm \ > + --$(call ptx/endis, PTXCONF_OPENOCD_OPENDOUS)-opendous \ > + --$(call ptx/endis, PTXCONF_OPENOCD_AICE)-aice \ > + --$(call ptx/endis, PTXCONF_OPENOCD_VSLLINK)-vsllink \ > + --$(call ptx/endis, PTXCONF_OPENOCD_USBPROG)-usbprog \ > + --$(call ptx/endis, PTXCONF_OPENOCD_RLINK)-rlink \ > + --$(call ptx/endis, PTXCONF_OPENOCD_ARMJTAGEW)-armjtagew \ > + --$(call ptx/endis, PTXCONF_OPENOCD_CMSIS_DAP)-cmsis-dap \ > + --$(call ptx/endis, PTXCONF_OPENOCD_PARPORT)-parport \ > + --$(call ptx/disen, PTXCONF_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \ > + --$(call ptx/endis, PTXCONF_OPENOCD_PARPORT_GIVEIO)-parport-giveio \ > + --$(call ptx/endis, PTXCONF_OPENOCD_JTAG_VPI)-jtag_vpi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \ > + --$(call ptx/endis, PTXCONF_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \ > + --$(call ptx/endis, PTXCONF_OPENOCD_ZY1000)-zy1000 \ > + --$(call ptx/endis, PTXCONF_OPENOCD_ZY1000_MASTER)-zy1000-master \ > + --$(call ptx/endis, PTXCONF_OPENOCD_IOUTIL)-ioutil \ > + --$(call ptx/endis, PTXCONF_OPENOCD_EP93XX)-ep93xx \ > + --$(call ptx/endis, PTXCONF_OPENOCD_AT91RM9200)-at91rm9200 \ > + --$(call ptx/endis, PTXCONF_OPENOCD_BCM2835GPIO)-bcm2835gpio \ > + --$(call ptx/endis, PTXCONF_OPENOCD_GW16012)-gw16012 \ > + --$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \ > + --$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \ > + --$(call ptx/endis, PTXCONF_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \ > + --$(call ptx/endis, PTXCONF_OPENOCD_OOCD_TRACE)-oocd_trace \ > + --$(call ptx/endis, PTXCONF_OPENOCD_BUSPIRATE)-buspirate \ > + --$(call ptx/endis, PTXCONF_OPENOCD_SYSFSGPIO)-sysfsgpio \ > + --$(call ptx/endis, PTXCONF_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \ > + --$(call ptx/endis, PTXCONF_OPENOCD_REMOTE_BITBANG)-remote-bitbang > + > +# ---------------------------------------------------------------------------- > +# Target-Install > +# ---------------------------------------------------------------------------- > + > +$(STATEDIR)/openocd.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, openocd) > + @$(call install_fixup, openocd,PRIORITY,optional) > + @$(call install_fixup, openocd,SECTION,base) > + @$(call install_fixup, openocd,AUTHOR,"Andreas Pretzsch ") > + @$(call install_fixup, openocd,DESCRIPTION,"OpenOCD - Open On-Chip Debugger") > + > + @$(call install_copy, openocd, 0, 0, 0755, -, /usr/bin/openocd) > +# @$(call install_tree, openocd, 0, 0, -, /usr/share/openocd/) don't add comments like this either remove this or actually install any useful files. Michael > + > + @$(call install_finish, openocd) > + > + @$(call touch) > + > + > +# vim: syntax=make > -- > 2.1.0 > > > -- > ptxdist mailing list > ptxdist@pengutronix.de > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- ptxdist mailing list ptxdist@pengutronix.de