Re: [ptxdist] [PATCH v2] bare_metal: add libopencm3 support

[Michael Grzeschik <mgr@pengutronix.de>]

Ping!

This should be mergable now. :o)

On Fri, Jun 27, 2014 at 09:02:35PM +0200, Michael Grzeschik wrote:
> This patch adds support for the libopencm3 for bare metal
> systems. With this library it is possible to build single
> applications for cortexm3 companion systems, that
> needs to be deployed with the bsp.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> v1 -> v2
> - fixed description from "stellaris" to "cm3"
> - used LIBOPENCM3_MAKE_OPT/_INSTALL_OPT where possible
> - expanded PATH for shorter PREFIX
> - used install instead of cp
> - removed empty targetinstall stage
> 
>  rules/bare_metal.in     |  7 +++++
>  rules/bare_metal_cm3.in | 12 +++++++++
>  rules/libopencm3.in     | 11 ++++++++
>  rules/libopencm3.make   | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 102 insertions(+)
>  create mode 100644 rules/bare_metal_cm3.in
>  create mode 100644 rules/libopencm3.in
>  create mode 100644 rules/libopencm3.make
> 
> diff --git a/rules/bare_metal.in b/rules/bare_metal.in
> index 1292a34..e5c15c5 100644
> --- a/rules/bare_metal.in
> +++ b/rules/bare_metal.in
> @@ -6,3 +6,10 @@ menuconfig STELLARIS
>  if STELLARIS
>  source "generated/bare_metal_stellaris.in"
>  endif
> +
> +menuconfig OPENCM3
> +	bool "OpenCM3                       "
> +
> +if OPENCM3
> +source "generated/bare_metal_cm3.in"
> +endif
> diff --git a/rules/bare_metal_cm3.in b/rules/bare_metal_cm3.in
> new file mode 100644
> index 0000000..b42c3d5
> --- /dev/null
> +++ b/rules/bare_metal_cm3.in
> @@ -0,0 +1,12 @@
> +## SECTION=bare_metal_cm3
> +
> +config CM3_GNU_TARGET
> +	string
> +	prompt "cm3 gnu target"
> +	default "arm-cortexm3-eabi"
> +	help
> +	  configure the cm3 gnu target
> +
> +config CM3_CC
> +	string
> +	default "${PTXCONF_CM3_GNU_TARGET}-gcc"
> diff --git a/rules/libopencm3.in b/rules/libopencm3.in
> new file mode 100644
> index 0000000..69276b7
> --- /dev/null
> +++ b/rules/libopencm3.in
> @@ -0,0 +1,11 @@
> +## SECTION=bare_metal_cm3
> +
> +config LIBOPENCM3
> +	tristate
> +	prompt "libopencm3"
> +	help
> +	  The libopencm3 project (previously known as libopenstm32) aims
> +	  to create a free/libre/open-source (LGPL v3, or later) firmware
> +	  library for various ARM Cortex-M0(+)/M3/M4 microcontrollers,
> +	  including ST STM32, Ti Tiva and Stellaris, NXP LPC 11xx, 13xx,
> +	  15xx, 17xx parts, Atmel SAM3, Energy Micro EFM32 and others.
> diff --git a/rules/libopencm3.make b/rules/libopencm3.make
> new file mode 100644
> index 0000000..ed8f984
> --- /dev/null
> +++ b/rules/libopencm3.make
> @@ -0,0 +1,72 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2013 by Michael Grzeschik <m.grzeschik@gmx.net>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +ifdef PTXCONF_LIBOPENCM3
> +ifneq ($(shell test -h $(PTXDIST_WORKSPACE)/selected_toolchain_cm3 && echo ok),ok)
> +    $(warning *** selected_toolchain_cm3 must point to a valid cortexm3 toolchain)
> +    $(error )
> +endif
> +ifneq ($(shell test -x $(PTXDIST_WORKSPACE)/selected_toolchain_cm3/$(PTXCONF_CM3_CC) && echo ok),ok)
> +    $(warning *** $(PTXDIST_WORKSPACE)/selected_toolchain_cm3/$(PTXCONF_CM3_CC) not found)
> +    $(error )
> +endif
> +endif
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_LIBOPENCM3) += libopencm3
> +
> +#
> +# Paths and names
> +#
> +LIBOPENCM3_VERSION	:= 67b538a5
> +LIBOPENCM3_MD5		:= 7d40cc7bcd3a5e852d0b37572655b9b5
> +LIBOPENCM3		:= libopencm3-$(LIBOPENCM3_VERSION)
> +LIBOPENCM3_SUFFIX	:= tar.bz2
> +LIBOPENCM3_URL		:= https://github.com/libopencm3/libopencm3.git;tag=67b538a5
> +LIBOPENCM3_SOURCE	:= $(SRCDIR)/$(LIBOPENCM3).$(LIBOPENCM3_SUFFIX)
> +LIBOPENCM3_DIR		:= $(BUILDDIR)/$(LIBOPENCM3)
> +LIBOPENCM3_LICENSE	:= LGPLv3+
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +LIBOPENCM3_PATH	:= \
> +	PATH=$(PATH):$(PTXDIST_WORKSPACE)/selected_toolchain_cm3
> +
> +LIBOPENCM3_MAKE_OPT := \
> +	PREFIX=$(PTXCONF_CM3_GNU_TARGET)
> +
> +LIBOPENCM3_INSTALL_OPT := \
> +	$(LIBOPENCM3_MAKE_OPT)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/libopencm3.install:
> +	@$(call targetinfo)
> +
> +#	# install static libraries
> +	cd $(LIBOPENCM3_DIR) && \
> +	for i in lib/*.a; do \
> +		install -D -m644 $$i $(PTXDIST_PLATFORMDIR)/sysroot-cm3/$$i; \
> +	done
> +
> +#	# install header files
> +	cd $(LIBOPENCM3_DIR) && \
> +	for i in `find . -name "*.h"`; do \
> +		install -D -m644 $$i $(PTXDIST_PLATFORMDIR)/sysroot-cm3/$$i; \
> +	done
> +	@$(call touch)
> +
> +# vim: syntax=make
> -- 
> 2.0.0
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de