From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] autossh: new package
Date: Mon, 30 Jun 2014 11:00:04 +0200 [thread overview]
Message-ID: <20140630090004.GG12903@pengutronix.de> (raw)
In-Reply-To: <1403903740-6261-1-git-send-email-jon@ringle.org>
On Fri, Jun 27, 2014 at 05:15:40PM -0400, jon@ringle.org wrote:
> From: Jon Ringle <jringle@gridpoint.com>
>
> autossh will automatically restart SSH sessions and tunnels
>
> http://www.harding.motd.ca/autossh/
>
> Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> ---
> ...l-rule-friendly-towards-packaging-with-DE.patch | 47 +++++++++++++++++++
> patches/autossh-1.4c/series | 4 ++
> rules/autossh.in | 7 +++
> rules/autossh.make | 53 ++++++++++++++++++++++
> 4 files changed, 111 insertions(+)
> create mode 100644 patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
> create mode 100644 patches/autossh-1.4c/series
> create mode 100644 rules/autossh.in
> create mode 100644 rules/autossh.make
>
> diff --git a/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch b/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
> new file mode 100644
> index 0000000..96fca56
> --- /dev/null
> +++ b/patches/autossh-1.4c/0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
> @@ -0,0 +1,47 @@
> +From: Jon Ringle <jringle@gridpoint.com>
> +Date: Fri, 27 Jun 2014 16:39:41 -0400
> +Subject: [PATCH] Make install rule friendly towards packaging with $DESTDIR
> +
> +Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> +---
> + Makefile.in | 30 +++++++++++++++---------------
> + 1 file changed, 15 insertions(+), 15 deletions(-)
> +
> +diff --git a/Makefile.in b/Makefile.in
> +index fb7cc1d..a8e7a7e 100644
> +--- a/Makefile.in
> ++++ b/Makefile.in
> +@@ -45,18 +45,18 @@ distclean: allclean
> + - /bin/rm -f Makefile
> +
> + install: $(TARGET)
> +- mkdir -p -m 755 $(bindir)
> +- mkdir -p -m 755 $(prefix)/share/doc/autossh
> +- mkdir -p -m 755 $(datadir)/examples/autossh
> +- mkdir -p -m 755 $(mandir)/man1
> +- cp $(TARGET) $(bindir)
> +- cp CHANGES README $(datadir)/doc/autossh
> +- cp autossh.host $(datadir)/examples/autossh
> +- cp rscreen $(datadir)/examples/autossh
> +- cp autossh.1 $(mandir)/man1
> +- chmod 755 $(bindir)/$(TARGET)
> +- chmod 644 $(datadir)/doc/autossh/CHANGES
> +- chmod 644 $(datadir)/doc/autossh/README
> +- chmod 644 $(datadir)/examples/autossh/autossh.host
> +- chmod 644 $(datadir)/examples/autossh/rscreen
> +- chmod 644 $(mandir)/man1/autossh.1
> ++ mkdir -p -m 755 $(DESTDIR)$(bindir)
> ++ mkdir -p -m 755 $(DESTDIR)$(prefix)/share/doc/autossh
> ++ mkdir -p -m 755 $(DESTDIR)$(datadir)/examples/autossh
> ++ mkdir -p -m 755 $(DESTDIR)$(mandir)/man1
> ++ cp $(TARGET) $(DESTDIR)$(bindir)
> ++ cp CHANGES README $(DESTDIR)$(datadir)/doc/autossh
> ++ cp autossh.host $(DESTDIR)$(datadir)/examples/autossh
> ++ cp rscreen $(DESTDIR)$(datadir)/examples/autossh
> ++ cp autossh.1 $(DESTDIR)$(mandir)/man1
> ++ chmod 755 $(DESTDIR)$(bindir)/$(TARGET)
> ++ chmod 644 $(DESTDIR)$(datadir)/doc/autossh/CHANGES
> ++ chmod 644 $(DESTDIR)$(datadir)/doc/autossh/README
> ++ chmod 644 $(DESTDIR)$(datadir)/examples/autossh/autossh.host
> ++ chmod 644 $(DESTDIR)$(datadir)/examples/autossh/rscreen
> ++ chmod 644 $(DESTDIR)$(mandir)/man1/autossh.1
> diff --git a/patches/autossh-1.4c/series b/patches/autossh-1.4c/series
> new file mode 100644
> index 0000000..29f971c
> --- /dev/null
> +++ b/patches/autossh-1.4c/series
> @@ -0,0 +1,4 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +0001-Make-install-rule-friendly-towards-packaging-with-DE.patch
> +# ecdd87ec5c25c56d421024daf8acf722 - git-ptx-patches magic
> diff --git a/rules/autossh.in b/rules/autossh.in
> new file mode 100644
> index 0000000..71ebf91
> --- /dev/null
> +++ b/rules/autossh.in
> @@ -0,0 +1,7 @@
> +## SECTION=networking
> +
> +config AUTOSSH
> + tristate
> + prompt "autossh"
> + help
> + Automatically restart SSH sessions and tunnels
> diff --git a/rules/autossh.make b/rules/autossh.make
> new file mode 100644
> index 0000000..38c64d3
> --- /dev/null
> +++ b/rules/autossh.make
> @@ -0,0 +1,53 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2014 by Jon Ringle <jringle@gridpoint.com>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_AUTOSSH) += autossh
> +
> +#
> +# Paths and names
> +#
> +AUTOSSH_VERSION := 1.4c
> +AUTOSSH_MD5 := 26520eea934f296be0783dabe7fcfd28
> +AUTOSSH := autossh-$(AUTOSSH_VERSION)
> +AUTOSSH_SUFFIX := tgz
> +AUTOSSH_URL := http://www.harding.motd.ca/autossh/$(AUTOSSH).$(AUTOSSH_SUFFIX)
Connecting to www.harding.motd.ca (www.harding.motd.ca)|70.72.193.225|:80... failed: Connection timed out.
I'll try again later to see if it's only temporary.
> +AUTOSSH_SOURCE := $(SRCDIR)/$(AUTOSSH).$(AUTOSSH_SUFFIX)
> +AUTOSSH_DIR := $(BUILDDIR)/$(AUTOSSH)
> +AUTOSSH_LICENSE := unknown
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +AUTOSSH_CONF_TOOL := autoconf
Really no relevant configure options?
Michael
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/autossh.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, autossh)
> + @$(call install_fixup, autossh,PRIORITY,optional)
> + @$(call install_fixup, autossh,SECTION,base)
> + @$(call install_fixup, autossh,AUTHOR,"Jon Ringle <jringle@gridpoint.com>")
> + @$(call install_fixup, autossh,DESCRIPTION,missing)
> +
> + @$(call install_copy, autossh, 0, 0, 0755, -, /usr/bin/autossh)
> +
> + @$(call install_finish, autossh)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 1.8.5.4
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-06-30 9:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 21:15 jon
2014-06-30 9:00 ` Michael Olbrich [this message]
2014-06-30 18:15 ` Jon Ringle
2014-06-30 18:22 ` Jon Ringle
2014-06-30 18:27 ` Jon Ringle
2014-07-01 11:00 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140630090004.GG12903@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox